[PATCH 13/15] spi/s3c64xx: Merge dma control code
Boojin Kim
boojin.kim at samsung.com
Wed Jul 27 01:31:35 EDT 2011
This patch modifies to merge the dma control code.
Original s3c64xx spi driver has each dma control code for rx and tx channel.
This patch merges these dma control codes into one.
With this patch, a dma setup function and callback function handle
for both rx and tx channel.
Signed-off-by: Boojin Kim <boojin.kim at samsung.com>
---
drivers/spi/spi_s3c64xx.c | 140 ++++++++++++++++++++++++--------------------
1 files changed, 76 insertions(+), 64 deletions(-)
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index a4cf76a..de71f55 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -132,6 +132,12 @@
#define RXBUSY (1<<2)
#define TXBUSY (1<<3)
+struct s3c64xx_spi_dma_data {
+ unsigned ch;
+ enum dma_data_direction direction;
+ enum dma_ch dmach;
+};
+
/**
* struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
* @clk: Pointer to the spi clock.
@@ -165,15 +171,13 @@ struct s3c64xx_spi_driver_data {
struct work_struct work;
struct list_head queue;
spinlock_t lock;
- enum dma_ch rx_dmach;
- enum dma_ch tx_dmach;
unsigned long sfr_start;
struct completion xfer_completion;
unsigned state;
unsigned cur_mode, cur_bpw;
unsigned cur_speed;
- unsigned rx_ch;
- unsigned tx_ch;
+ struct s3c64xx_spi_dma_data rx_dma;
+ struct s3c64xx_spi_dma_data tx_dma;
struct samsung_dma_ops *ops;
};
@@ -230,36 +234,76 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
writel(val, regs + S3C64XX_SPI_CH_CFG);
}
-static void s3c64xx_spi_dma_rxcb(void *data)
+static void s3c64xx_spi_dmacb(void *data)
{
- struct s3c64xx_spi_driver_data *sdd
- = (struct s3c64xx_spi_driver_data *)data;
+ struct s3c64xx_spi_driver_data *sdd;
+ struct s3c64xx_spi_dma_data *dma = data;
unsigned long flags;
+ if (dma->direction == DMA_FROM_DEVICE)
+ sdd = container_of(data,
+ struct s3c64xx_spi_driver_data, rx_dma);
+ else
+ sdd = container_of(data,
+ struct s3c64xx_spi_driver_data, tx_dma);
+
spin_lock_irqsave(&sdd->lock, flags);
- sdd->state &= ~RXBUSY;
- /* If the other done */
- if (!(sdd->state & TXBUSY))
- complete(&sdd->xfer_completion);
+ if (dma->direction == DMA_FROM_DEVICE) {
+ sdd->state &= ~RXBUSY;
+ if (!(sdd->state & TXBUSY))
+ complete(&sdd->xfer_completion);
+ } else {
+ sdd->state &= ~TXBUSY;
+ if (!(sdd->state & RXBUSY))
+ complete(&sdd->xfer_completion);
+ }
spin_unlock_irqrestore(&sdd->lock, flags);
}
-static void s3c64xx_spi_dma_txcb(void *data)
+static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
+ unsigned len, dma_addr_t buf)
{
- struct s3c64xx_spi_driver_data *sdd
- = (struct s3c64xx_spi_driver_data *)data;
- unsigned long flags;
+ struct s3c64xx_spi_driver_data *sdd;
+ struct samsung_dma_prep_info info;
- spin_lock_irqsave(&sdd->lock, flags);
+ if (dma->direction == DMA_FROM_DEVICE)
+ sdd = container_of((void *)dma,
+ struct s3c64xx_spi_driver_data, rx_dma);
+ else
+ sdd = container_of((void *)dma,
+ struct s3c64xx_spi_driver_data, tx_dma);
- sdd->state &= ~TXBUSY;
- /* If the other done */
- if (!(sdd->state & RXBUSY))
- complete(&sdd->xfer_completion);
+ info.cap = DMA_SLAVE;
+ info.len = len;
+ info.fp = s3c64xx_spi_dmacb;
+ info.fp_param = dma;
+ info.direction = dma->direction;
+ info.buf = buf;
+
+ sdd->ops->prepare(dma->ch, &info);
+ sdd->ops->trigger(dma->ch);
+}
- spin_unlock_irqrestore(&sdd->lock, flags);
+static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
+{
+ struct samsung_dma_info info;
+
+ sdd->ops = samsung_dma_get_ops();
+
+ info.cap = DMA_SLAVE;
+ info.client = &s3c64xx_spi_dma_client;
+ info.width = sdd->cur_bpw / 8;
+
+ info.direction = sdd->rx_dma.direction;
+ info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+ sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info);
+ info.direction = sdd->tx_dma.direction;
+ info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+ sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info);
+
+ return 1;
}
static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
@@ -269,7 +313,6 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
- struct samsung_dma_prep_info info;
modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
@@ -295,14 +338,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
chcfg |= S3C64XX_SPI_CH_TXCH_ON;
if (dma_mode) {
modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
- info.cap = DMA_SLAVE;
- info.direction = DMA_TO_DEVICE;
- info.buf = xfer->tx_dma;
- info.len = xfer->len;
- info.fp = s3c64xx_spi_dma_txcb;
- info.fp_param = sdd;
- sdd->ops->prepare(sdd->tx_ch, &info);
- sdd->ops->trigger(sdd->tx_ch);
+ prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma);
} else {
switch (sdd->cur_bpw) {
case 32:
@@ -334,14 +370,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
| S3C64XX_SPI_PACKET_CNT_EN,
regs + S3C64XX_SPI_PACKET_CNT);
- info.cap = DMA_SLAVE;
- info.direction = DMA_FROM_DEVICE;
- info.buf = xfer->rx_dma;
- info.len = xfer->len;
- info.fp = s3c64xx_spi_dma_rxcb;
- info.fp_param = sdd;
- sdd->ops->prepare(sdd->rx_ch, &info);
- sdd->ops->trigger(sdd->rx_ch);
+ prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma);
}
}
@@ -701,10 +730,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
if (use_dma) {
if (xfer->tx_buf != NULL
&& (sdd->state & TXBUSY))
- sdd->ops->stop(sdd->tx_ch);
+ sdd->ops->stop(sdd->tx_dma.ch);
if (xfer->rx_buf != NULL
&& (sdd->state & RXBUSY))
- sdd->ops->stop(sdd->rx_ch);
+ sdd->ops->stop(sdd->rx_dma.ch);
}
goto out;
@@ -742,25 +771,6 @@ out:
msg->complete(msg->context);
}
-static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
-{
-
- struct samsung_dma_info info;
- sdd->ops = samsung_dma_get_ops();
-
- info.cap = DMA_SLAVE;
- info.client = &s3c64xx_spi_dma_client;
- info.direction = DMA_FROM_DEVICE;
- info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
- info.width = sdd->cur_bpw / 8;
- sdd->rx_ch = sdd->ops->request(sdd->rx_dmach, &info);
- info.direction = DMA_TO_DEVICE;
- info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
- sdd->tx_ch = sdd->ops->request(sdd->tx_dmach, &info);
-
- return 1;
-}
-
static void s3c64xx_spi_work(struct work_struct *work)
{
struct s3c64xx_spi_driver_data *sdd = container_of(work,
@@ -797,8 +807,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
spin_unlock_irqrestore(&sdd->lock, flags);
/* Free DMA channels */
- sdd->ops->release(sdd->rx_ch, &s3c64xx_spi_dma_client);
- sdd->ops->release(sdd->tx_ch, &s3c64xx_spi_dma_client);
+ sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
+ sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
}
static int s3c64xx_spi_transfer(struct spi_device *spi,
@@ -1015,8 +1025,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
sdd->cntrlr_info = sci;
sdd->pdev = pdev;
sdd->sfr_start = mem_res->start;
- sdd->tx_dmach = dmatx_res->start;
- sdd->rx_dmach = dmarx_res->start;
+ sdd->tx_dma.dmach = dmatx_res->start;
+ sdd->tx_dma.direction = DMA_TO_DEVICE;
+ sdd->rx_dma.dmach = dmarx_res->start;
+ sdd->rx_dma.direction = DMA_FROM_DEVICE;
sdd->cur_bpw = 8;
@@ -1104,7 +1116,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
pdev->id, master->num_chipselect);
dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
mem_res->end, mem_res->start,
- sdd->rx_dmach, sdd->tx_dmach);
+ sdd->rx_dma.dmach, sdd->tx_dma.dmach);
return 0;
--
1.7.1
More information about the linux-arm-kernel
mailing list