[PATCH 0/7] ARM: mx28: add usb host function

[Tony Lin]

this patch series is to add mx28 usb host function.
the driver only support usb host mode on usb port1.
the driver reuses ehci-mxc.c under usb/host, but did
some modifications based on it to satisfy mx28 usb host
requirement. The modifications will not affect other
platforms.

Code is based on the branch for-next in sascha's tree http://git.pengutronix.de/git/imx/linux-2.6.git

Tested on MX28 EVK.

Tony Lin (7):
  consolidate definitions and structures to share among platforms
  enable usb1 phy power supply
  add usb phy clocks to clock tree
  mx28: add usb host phy functions
  ehci mxc: make it more flexible to be used for mx28
  add macro definitions according to ehci-mxc driver change
  add usb host function to default config

 arch/arm/configs/mxs_defconfig            |    8 +-
 arch/arm/mach-mxs/Kconfig                 |    1 +
 arch/arm/mach-mxs/Makefile                |    1 +
 arch/arm/mach-mxs/clock-mx28.c            |   18 ++
 arch/arm/mach-mxs/include/mach/hardware.h |    2 +
 arch/arm/mach-mxs/include/mach/mxs.h      |   12 +-
 arch/arm/mach-mxs/mach-mx28evk.c          |    9 +
 arch/arm/mach-mxs/regs-usbphy-mx28.h      |  323 +++++++++++++++++++++++++++++
 arch/arm/mach-mxs/usb_h1.c                |  230 ++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/mxc.h      |    3 +
 arch/arm/plat-mxc/include/mach/mxc_ehci.h |   19 --
 drivers/usb/host/Kconfig                  |    2 +-
 drivers/usb/host/ehci-mxc.c               |   57 ++++--
 include/linux/fsl_devices.h               |   21 ++
 14 files changed, 669 insertions(+), 37 deletions(-)
 create mode 100644 arch/arm/mach-mxs/regs-usbphy-mx28.h
 create mode 100644 arch/arm/mach-mxs/usb_h1.c