[GIT PULL] omap twl cleanup for v3.1 merge window
Tony Lindgren
tony at atomide.com
Sun Jul 10 15:50:25 EDT 2011
* Tony Lindgren <tony at atomide.com> [110710 03:12]:
> * Tony Lindgren <tony at atomide.com> [110709 23:50]:
> > * Arnd Bergmann <arnd at arndb.de> [110708 08:36]:
> > > On Friday 08 July 2011, Tony Lindgren wrote:
> > > >
> > > >I've attached a conflict resolution patch too, it's trivial execpt
> > > >note that .vdac needs to be removed in board-rx51-peripherals.c.
> > > >
> > > >If this conflict causes problems for you, I can also base this series
> > > >on omap/board.
> > >
> > > The conflict resolution you suggested doesn't build here:
> > ...
> >
> > >
> > > These are removed in the cleanup series, but changed in the fixes branch,
> > > now the removal is undone
> >
> > Hmm these are added in omap/board. Maybe the issue is caused by not
> > merging omap/board also?
>
> Looks like what got added in in omap/board should now work with the
> TWL default values in twl-common.c. So most likely those can just be
> dropped. Will check that today.
Yes most of it can be dropped for 4430sdp, but the merge is a pain.
I've merged cleanup-part-2 into my devel-board so if you pull that
into your omap/board, and merge omap/board into your master
branch things should be sorted out. The updated devel-board is at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git devel-board
The new top commit at 1ad920556f32a5a127397ca461d1a1faaf22c4e0.
As omap/board already depends on omap/cleanup, this does not cause
new dependency issues. I've also added the resolve patch below.
Regards,
Tony
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@@ -411,41 -324,6 +403,37 @@@ static struct regulator_consumer_suppl
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
- static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
- };
-
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+ .supply = "vmmc",
+ .dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
+};
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = GPIO_WIFI_PMENA,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdp4430_vwlan,
+ },
+};
+
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@@ -916,13 -761,7 +884,12 @@@ static struct twl4030_platform_data rx5
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
- .vdac = &rx51_vdac,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
More information about the linux-arm-kernel
mailing list