[PATCH v2 0/6] arm: davinci: DA850: wl12xx expansion card
Ido Yariv
ido at wizery.com
Sun Jul 10 09:14:33 EDT 2011
The following series adds support for an optional wl12xx based expansion
card for the AM18x EVM:
http://processors.wiki.ti.com/index.php/AM18x_%2B_WL1271
The first couple of patches address issues which had to be fixed for this
series to work. However, these should be fixed regardless of the wl12xx
daughter board support.
Only the Wi-Fi functionality of the expansion card is supported. Bluetooth
functionality is not yet supported.
The patches are based on v3.0-rc6.
Changes from v1:
* Explicitly set the default queue for all channel controllers on all
platforms. As it makes little sense to set DA850's default queue to an
invalid value and then fix it, merge the two patches
* Move pinmux configurations to separate patches
* Remove FREF Kconfig entry, use a default value of 38MHz instead
* Use msleep for long delays, usleep_range for shorter ones
* Minor cleanups
Ido.
Ido Yariv (6):
arm: davinci: Fix low level gpio irq handlers' argument
arm: davinci: Explicitly set channel controllers' default queues
arm: davinci: mmc: Add support for set_power callback
arm: davinci: DA850: Add MMC/SD1 pinmux configuration
arm: davinci: DA850: Add GPIO pinmux configuration for wl1271
arm: davinci: DA850: Add wl1271/wlan support
arch/arm/mach-davinci/Kconfig | 10 +++
arch/arm/mach-davinci/board-da850-evm.c | 127 +++++++++++++++++++++++++++++
arch/arm/mach-davinci/da850.c | 9 ++
arch/arm/mach-davinci/devices-da8xx.c | 3 +
arch/arm/mach-davinci/devices-tnetv107x.c | 1 +
arch/arm/mach-davinci/dm355.c | 1 +
arch/arm/mach-davinci/dm644x.c | 1 +
arch/arm/mach-davinci/dm646x.c | 1 +
arch/arm/mach-davinci/dma.c | 2 -
arch/arm/mach-davinci/gpio.c | 32 +++++++-
arch/arm/mach-davinci/include/mach/mmc.h | 3 +
arch/arm/mach-davinci/include/mach/mux.h | 10 +++
drivers/mmc/host/davinci_mmc.c | 13 +++
13 files changed, 207 insertions(+), 6 deletions(-)
--
1.7.4.1
More information about the linux-arm-kernel
mailing list