[PATCH v2 3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro
Shawn Guo
shawn.guo at linaro.org
Sat Jul 9 13:16:37 EDT 2011
It's confusing to use spi_imx2_3 to name SPI_IMX_VER_2_3 function
and macro, as it easily make people think of imx2 and imx3. It's
better to use specific soc name just like what other SPI_IMX_VER
do. For SPI_IMX_VER_2_3 case, it will be mx51. To distinguish it
from CSPI on mx51, mx51_ecspi might be a good choice.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Cc: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Grant Likely <grant.likely at secretlab.ca>
---
drivers/spi/spi-imx.c | 107 +++++++++++++++++++++++++------------------------
1 files changed, 54 insertions(+), 53 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index ad928b1..052959df 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -171,30 +171,30 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
return 7;
}
-#define SPI_IMX2_3_CTRL 0x08
-#define SPI_IMX2_3_CTRL_ENABLE (1 << 0)
-#define SPI_IMX2_3_CTRL_XCH (1 << 2)
-#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4)
-#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8
-#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12
-#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18)
-#define SPI_IMX2_3_CTRL_BL_OFFSET 20
-
-#define SPI_IMX2_3_CONFIG 0x0c
-#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
-#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
-#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
-#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
-
-#define SPI_IMX2_3_INT 0x10
-#define SPI_IMX2_3_INT_TEEN (1 << 0)
-#define SPI_IMX2_3_INT_RREN (1 << 3)
-
-#define SPI_IMX2_3_STAT 0x18
-#define SPI_IMX2_3_STAT_RR (1 << 3)
+#define MX51_ECSPI_CTRL 0x08
+#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
+#define MX51_ECSPI_CTRL_XCH (1 << 2)
+#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
+#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
+#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
+#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
+#define MX51_ECSPI_CTRL_BL_OFFSET 20
+
+#define MX51_ECSPI_CONFIG 0x0c
+#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
+#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
+#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
+#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
+
+#define MX51_ECSPI_INT 0x10
+#define MX51_ECSPI_INT_TEEN (1 << 0)
+#define MX51_ECSPI_INT_RREN (1 << 3)
+
+#define MX51_ECSPI_STAT 0x18
+#define MX51_ECSPI_STAT_RR (1 << 3)
/* MX51 eCSPI */
-static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
+static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi)
{
/*
* there are two 4-bit dividers, the pre-divider divides by
@@ -222,36 +222,37 @@ static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
__func__, fin, fspi, post, pre);
- return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
- (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
+ return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
+ (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
}
-static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
+static void __maybe_unused
+mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
{
unsigned val = 0;
if (enable & MXC_INT_TE)
- val |= SPI_IMX2_3_INT_TEEN;
+ val |= MX51_ECSPI_INT_TEEN;
if (enable & MXC_INT_RR)
- val |= SPI_IMX2_3_INT_RREN;
+ val |= MX51_ECSPI_INT_RREN;
- writel(val, spi_imx->base + SPI_IMX2_3_INT);
+ writel(val, spi_imx->base + MX51_ECSPI_INT);
}
-static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
{
u32 reg;
- reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
- reg |= SPI_IMX2_3_CTRL_XCH;
- writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
+ reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+ reg |= MX51_ECSPI_CTRL_XCH;
+ writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
}
-static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
struct spi_imx_config *config)
{
- u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
+ u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0;
/*
* The hardware seems to have a race condition when changing modes. The
@@ -260,42 +261,42 @@ static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
* the same time.
* So set master mode for all channels as we do not support slave mode.
*/
- ctrl |= SPI_IMX2_3_CTRL_MODE_MASK;
+ ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
/* set clock speed */
- ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
+ ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz);
/* set chip select to use */
- ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
+ ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
- ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
+ ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
- cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
+ cfg |= MX51_ECSPI_CONFIG_SBBCTRL(config->cs);
if (config->mode & SPI_CPHA)
- cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
+ cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
if (config->mode & SPI_CPOL)
- cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
+ cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
if (config->mode & SPI_CS_HIGH)
- cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
+ cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
- writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
- writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
+ writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
+ writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
return 0;
}
-static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
+static int __maybe_unused mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
{
- return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
+ return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
}
-static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
+static void __maybe_unused mx51_ecspi_reset(struct spi_imx_data *spi_imx)
{
/* drain receive buffer */
- while (spi_imx2_3_rx_available(spi_imx))
+ while (mx51_ecspi_rx_available(spi_imx))
readl(spi_imx->base + MXC_CSPIRXDATA);
}
@@ -583,11 +584,11 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] = {
#endif
#ifdef CONFIG_SPI_IMX_VER_2_3
[SPI_IMX_VER_2_3] = {
- .intctrl = spi_imx2_3_intctrl,
- .config = spi_imx2_3_config,
- .trigger = spi_imx2_3_trigger,
- .rx_available = spi_imx2_3_rx_available,
- .reset = spi_imx2_3_reset,
+ .intctrl = mx51_ecspi_intctrl,
+ .config = mx51_ecspi_config,
+ .trigger = mx51_ecspi_trigger,
+ .rx_available = mx51_ecspi_rx_available,
+ .reset = mx51_ecspi_reset,
.fifosize = 64,
},
#endif
--
1.7.4.1
More information about the linux-arm-kernel
mailing list