[PATCH v2 3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro
Grant Likely
grant.likely at secretlab.ca
Thu Jul 14 22:53:45 EDT 2011
On Sun, Jul 10, 2011 at 01:16:37AM +0800, Shawn Guo wrote:
> It's confusing to use spi_imx2_3 to name SPI_IMX_VER_2_3 function
> and macro, as it easily make people think of imx2 and imx3. It's
> better to use specific soc name just like what other SPI_IMX_VER
> do. For SPI_IMX_VER_2_3 case, it will be mx51. To distinguish it
> from CSPI on mx51, mx51_ecspi might be a good choice.
>
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> Cc: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Grant Likely <grant.likely at secretlab.ca>
Applied, thanks.
g.
> ---
> drivers/spi/spi-imx.c | 107 +++++++++++++++++++++++++------------------------
> 1 files changed, 54 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
> index ad928b1..052959df 100644
> --- a/drivers/spi/spi-imx.c
> +++ b/drivers/spi/spi-imx.c
> @@ -171,30 +171,30 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
> return 7;
> }
>
> -#define SPI_IMX2_3_CTRL 0x08
> -#define SPI_IMX2_3_CTRL_ENABLE (1 << 0)
> -#define SPI_IMX2_3_CTRL_XCH (1 << 2)
> -#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4)
> -#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8
> -#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12
> -#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18)
> -#define SPI_IMX2_3_CTRL_BL_OFFSET 20
> -
> -#define SPI_IMX2_3_CONFIG 0x0c
> -#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
> -#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
> -#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
> -#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
> -
> -#define SPI_IMX2_3_INT 0x10
> -#define SPI_IMX2_3_INT_TEEN (1 << 0)
> -#define SPI_IMX2_3_INT_RREN (1 << 3)
> -
> -#define SPI_IMX2_3_STAT 0x18
> -#define SPI_IMX2_3_STAT_RR (1 << 3)
> +#define MX51_ECSPI_CTRL 0x08
> +#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
> +#define MX51_ECSPI_CTRL_XCH (1 << 2)
> +#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4)
> +#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
> +#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
> +#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
> +#define MX51_ECSPI_CTRL_BL_OFFSET 20
> +
> +#define MX51_ECSPI_CONFIG 0x0c
> +#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
> +#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
> +#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
> +#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
> +
> +#define MX51_ECSPI_INT 0x10
> +#define MX51_ECSPI_INT_TEEN (1 << 0)
> +#define MX51_ECSPI_INT_RREN (1 << 3)
> +
> +#define MX51_ECSPI_STAT 0x18
> +#define MX51_ECSPI_STAT_RR (1 << 3)
>
> /* MX51 eCSPI */
> -static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
> +static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi)
> {
> /*
> * there are two 4-bit dividers, the pre-divider divides by
> @@ -222,36 +222,37 @@ static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
>
> pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
> __func__, fin, fspi, post, pre);
> - return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
> - (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
> + return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) |
> + (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET);
> }
>
> -static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
> +static void __maybe_unused
> +mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable)
> {
> unsigned val = 0;
>
> if (enable & MXC_INT_TE)
> - val |= SPI_IMX2_3_INT_TEEN;
> + val |= MX51_ECSPI_INT_TEEN;
>
> if (enable & MXC_INT_RR)
> - val |= SPI_IMX2_3_INT_RREN;
> + val |= MX51_ECSPI_INT_RREN;
>
> - writel(val, spi_imx->base + SPI_IMX2_3_INT);
> + writel(val, spi_imx->base + MX51_ECSPI_INT);
> }
>
> -static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
> +static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
> {
> u32 reg;
>
> - reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
> - reg |= SPI_IMX2_3_CTRL_XCH;
> - writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
> + reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
> + reg |= MX51_ECSPI_CTRL_XCH;
> + writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
> }
>
> -static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
> +static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
> struct spi_imx_config *config)
> {
> - u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
> + u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0;
>
> /*
> * The hardware seems to have a race condition when changing modes. The
> @@ -260,42 +261,42 @@ static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
> * the same time.
> * So set master mode for all channels as we do not support slave mode.
> */
> - ctrl |= SPI_IMX2_3_CTRL_MODE_MASK;
> + ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
>
> /* set clock speed */
> - ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
> + ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz);
>
> /* set chip select to use */
> - ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
> + ctrl |= MX51_ECSPI_CTRL_CS(config->cs);
>
> - ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
> + ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET;
>
> - cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
> + cfg |= MX51_ECSPI_CONFIG_SBBCTRL(config->cs);
>
> if (config->mode & SPI_CPHA)
> - cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
> + cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
>
> if (config->mode & SPI_CPOL)
> - cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
> + cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
>
> if (config->mode & SPI_CS_HIGH)
> - cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
> + cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
>
> - writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
> - writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
> + writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
> + writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
>
> return 0;
> }
>
> -static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
> +static int __maybe_unused mx51_ecspi_rx_available(struct spi_imx_data *spi_imx)
> {
> - return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
> + return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR;
> }
>
> -static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
> +static void __maybe_unused mx51_ecspi_reset(struct spi_imx_data *spi_imx)
> {
> /* drain receive buffer */
> - while (spi_imx2_3_rx_available(spi_imx))
> + while (mx51_ecspi_rx_available(spi_imx))
> readl(spi_imx->base + MXC_CSPIRXDATA);
> }
>
> @@ -583,11 +584,11 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] = {
> #endif
> #ifdef CONFIG_SPI_IMX_VER_2_3
> [SPI_IMX_VER_2_3] = {
> - .intctrl = spi_imx2_3_intctrl,
> - .config = spi_imx2_3_config,
> - .trigger = spi_imx2_3_trigger,
> - .rx_available = spi_imx2_3_rx_available,
> - .reset = spi_imx2_3_reset,
> + .intctrl = mx51_ecspi_intctrl,
> + .config = mx51_ecspi_config,
> + .trigger = mx51_ecspi_trigger,
> + .rx_available = mx51_ecspi_rx_available,
> + .reset = mx51_ecspi_reset,
> .fifosize = 64,
> },
> #endif
> --
> 1.7.4.1
>
More information about the linux-arm-kernel
mailing list