[PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()
Grant Likely
grant.likely at secretlab.ca
Mon Jul 4 23:04:55 EDT 2011
On Mon, Jul 4, 2011 at 9:01 PM, Shawn Guo <shawn.guo at freescale.com> wrote:
> On Mon, Jul 04, 2011 at 06:44:57PM +0200, Sascha Hauer wrote:
>> Read again. We have three different types of gpio irq controllers, they
>> are first seen in the imx1, imx21 and imx31. So all others can be made
>> compatible with these three. No need for imx-gpio, imx25-gpio and
>> imx27-gpio. The mxc_gpio_devtype would look like this:
>>
>> static struct platform_device_id mxc_gpio_devtype[] = {
>> {
>> .name = "imx1-gpio",
>> .driver_data = IMX1_GPIO,
>> }, {
>> .name = "imx21-gpio",
>> .driver_data = IMX21_GPIO,
>> }, {
>> .name = "imx31-gpio",
>> .driver_data = IMX31_GPIO,
>> }, {
>> }
>> };
>>
> This is really what I want to do with dt match table. But before we
> totally remove platform device probe and switch it over to dt, I'm
> unsure we want to do this. It will require the following changes on
> platform device code registration right now. I guess this is
> something you do not want, right?
What is the problem with the below changes? I see no issue with
changing the static platform_device registrations in this way.
g.
>
> diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
> index 1e0c956..ba3009e 100644
> --- a/arch/arm/mach-imx/mm-imx25.c
> +++ b/arch/arm/mach-imx/mm-imx25.c
> @@ -86,10 +86,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = {
>
> void __init imx25_soc_init(void)
> {
> - mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
> - mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
> - mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
> - mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
> + mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
> + mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
> + mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
> + mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
>
> imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
> }
>
> diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
> index 944e02d..81a7870 100644
> --- a/arch/arm/mach-imx/mm-imx27.c
> +++ b/arch/arm/mach-imx/mm-imx27.c
> @@ -77,12 +77,12 @@ void __init mx27_init_irq(void)
>
> void __init imx27_soc_init(void)
> {
> - mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
>
> imx_add_imx_dma();
> }
>
> diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
> index da530ca..8b98205 100644
> --- a/arch/arm/mach-imx/mm-imx35.c
> +++ b/arch/arm/mach-imx/mm-imx35.c
> @@ -95,9 +95,9 @@ void __init imx35_soc_init(void)
> {
> int to_version = mx35_revision() >> 4;
>
> - mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
> - mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
> - mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
> + mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
> + mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
> + mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
>
> if (to_version == 1) {
> strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
> diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
> index 28c3f60..5c20b33 100644
> --- a/arch/arm/mach-mx5/mm-mx50.c
> +++ b/arch/arm/mach-mx5/mm-mx50.c
> @@ -62,10 +62,10 @@ void __init mx50_init_irq(void)
>
> void __init imx50_soc_init(void)
> {
> - mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
> - mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
> - mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
> - mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
> - mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
> - mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
> + mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
> + mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
> + mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
> + mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
> + mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
> + mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
> }
>
> diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
> index 1b7059f..82ad5be 100644
> --- a/arch/arm/mach-mx5/mm.c
> +++ b/arch/arm/mach-mx5/mm.c
> @@ -142,23 +142,23 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
>
> void __init imx51_soc_init(void)
> {
> - mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
> - mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
> - mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
> - mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
> + mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
> + mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
> + mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
> + mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
>
> imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
> }
>
> void __init imx53_soc_init(void)
> {
> - mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
> - mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
> - mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
> - mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
> - mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
> - mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
> - mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
> + mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
> + mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
> + mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
> + mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
> + mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
> + mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
> + mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
>
> imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
> }
>
> --
> Regards,
> Shawn
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
More information about the linux-arm-kernel
mailing list