[PATCH] ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices

[Fabio Estevam]

Currently it is only the MX50_RDP board that selects IMX_HAVE_PLATFORM_FEC in its board Kconfig.

Do like the other i.MX processors, which select IMX_HAVE_PLATFORM_FEC based on the processor type.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/mach-mx5/Kconfig         |    1 -
 arch/arm/plat-mxc/devices/Kconfig |    2 +-
 2 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index b4e7c58..a303445 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -52,7 +52,6 @@ config MACH_MX50_RDP
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select IMX_HAVE_PLATFORM_FEC
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index bd294ad..4c8b00b 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -1,6 +1,6 @@
 config IMX_HAVE_PLATFORM_FEC
 	bool
-	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 || SOC_IMX50
 
 config IMX_HAVE_PLATFORM_FLEXCAN
 	select HAVE_CAN_FLEXCAN if CAN
-- 
1.7.1