[RFC PATCH] ARM: imx27pdk (3ds): enable m13783 codec over SSI
Jürgen Lambrecht
juergen.lambrecht at gmail.com
Fri Jul 8 09:28:58 EDT 2011
- add SSI in Kconfig
- enable audio in MFD mc13783
- configure audmux-v1
- configure SSI4
Signed-off-by: Jürgen Lambrecht <J.Lambrecht at televic.com>
---
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/mach-mx27_3ds.c | 40 ++++++++++++++++++++++++++++++++++++-
2 files changed, 40 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0a3512b..2fe5e70 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -286,6 +286,7 @@ config MACH_MX27_3DS
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
+ select IMX_HAVE_PLATFORM_IMX_SSI
select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
help
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 2787cf3..c0f7dcc 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -41,6 +41,7 @@
#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include <mach/mxc_nand.h>
+#include <mach/audmux.h>
#include "devices-imx27.h"
@@ -101,6 +102,11 @@ static const int mx27pdk_pins[] __initconst = {
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
+ /* SSI4 for audio to MC13783 */
+ PC16_PF_SSI4_FS,
+ PC17_PF_SSI4_RXD,
+ PC18_PF_SSI4_TXD,
+ PC19_PF_SSI4_CLK,
/* CSPI1 */
PD31_PF_CSPI1_MOSI,
PD30_PF_CSPI1_MISO,
@@ -271,6 +277,13 @@ static struct regulator_init_data vgen_init = {
.consumer_supplies = vgen_consumers,
};
+static struct regulator_init_data vaudio_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ },
+};
+
static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
{
.id = MC13783_REG_VMMC1,
@@ -284,6 +297,9 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
}, {
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
.init_data = &gpo_init,
+ }, {
+ .id = MC13783_REG_VAUDIO, /* Power codec */
+ .init_data = &vaudio_init,
},
};
@@ -295,7 +311,7 @@ static struct mc13xxx_platform_data mc13783_pdata = {
},
.flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
- MC13783_USE_RTC,
+ MC13783_USE_RTC | MC13783_USE_CODEC,
};
/* SPI */
@@ -385,6 +401,11 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
+/* 4-wire is synchronous; SSI-slave and MC13783-master; DMA instead of FIQ */
+static const struct imx_ssi_platform_data mx27pdk_ssi4_pdata __initconst = {
+ .flags = IMX_SSI_SYN | IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
+};
+
static void __init mx27pdk_init(void)
{
imx27_soc_init();
@@ -420,6 +441,23 @@ static void __init mx27pdk_init(void)
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+ /* SSI unit master I2S codec connected to SSI_PINS_4*/
+ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+ MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V1_PCR_TFSDIR | /* Transmit Frame Sync is output */
+ MXC_AUDMUX_V1_PCR_TCLKDIR | /* Transmit Clock is output */
+ MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | /*Transmit Frame Sync and Clock select source port to be HPCR3 or external SSI4*/
+ MXC_AUDMUX_V1_PCR_RFSDIR | /* Receive Frame Sync is output */
+ MXC_AUDMUX_V1_PCR_RCLKDIR | /* Receive Clock is output */
+ MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | /*Receive Frame Sync and Clock select source port to be HPCR3 or external SSI4*/
+ MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) /*Receive Data select source port to be HPCR3 or external SSI4*/
+ );
+ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
+ MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) /*Receive Data select source port to be HPCR1 or internal SSI1*/
+ );
+ imx27_add_imx_ssi(0, &mx27pdk_ssi4_pdata);
}
static void __init mx27pdk_timer_init(void)
--
1.7.1
More information about the linux-arm-kernel
mailing list