[PATCH] ARM: OMAP4: PCM049: remove vusim regulator

[Jan Weitzel]

Am Freitag, den 15.07.2011, 00:50 -0700 schrieb Tony Lindgren:
> Well we can add it even before device tree support if it makes
> sense from code coalescing point of view. In this case it would
> mean creating board-panda-common.c or similar so the code can
> be shared amongst the panda variants.
> 
> It seems that some GPIO pins are different and there are some
> difference in devices connected, but big parts of the code can be
> shared.
> 
> Adding the pending boards without combining code would be adding code
> that will be going away for most part with the device tree support.
> 
> And most likely the beagle and panda based boards will be the first
> ones to work with device tree. So anything we can do to have common
> board init code will also help with this effort.
> 
> Regards,
> 
> Tony
pcm049 and panda board have some more different devices.
I am working on patches to add NAND support and using tlv320aic3x audio
codec which need regulators in platformcode. I need a hack to controll
usb otg by gpio (controlling a external power circuit). The patches are
not mainline ready by now. 
If using machine_is_xxxx() in board-omap4panda.c then also is good way,
I could provide our board as patches on top of board-omap4panda.c.
When will pandaboard use device tree to boot?

Kind Regards,
Jan