[PATCH v2 1/2] serial/imx: get rid of the uses of cpu_is_mx1()
Grant Likely
grant.likely at secretlab.ca
Tue Jul 5 13:27:55 EDT 2011
On Tue, Jul 5, 2011 at 9:05 AM, Shawn Guo <shawn.guo at linaro.org> wrote:
> The patch removes all the uses of cpu_is_mx1(). Instead, it uses
> the .id_table of platform_driver to distinguish the uart device type.
>
> A couple of !cpu_is_mx1() logic gets turned into IS_IMX_UART, as the
> codes wrapped there are really IMX specific.
>
> It also removes macro MX1_UCR3_REF25 and MX1_UCR3_REF30 which are
> not used anywhere.
>
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Alan Cox <alan at lxorguk.ukuu.org.uk>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
Who's tree is this one going to get merged through?
g.
> ---
> arch/arm/mach-imx/clock-imx1.c | 6 +-
> arch/arm/plat-mxc/devices/platform-imx-uart.c | 2 +-
> drivers/tty/serial/imx.c | 65 ++++++++++++++++++++-----
> 3 files changed, 56 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
> index dcc4172..4aabeb2 100644
> --- a/arch/arm/mach-imx/clock-imx1.c
> +++ b/arch/arm/mach-imx/clock-imx1.c
> @@ -587,9 +587,9 @@ static struct clk_lookup lookups[] __initdata = {
> _REGISTER_CLOCK(NULL, "mma", mma_clk)
> _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
> _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
> - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
> - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
> - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
> + _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk)
> + _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk)
> + _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk)
> _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
> _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
> _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
> diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
> index cfce8c9..477271a 100644
> --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
> +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
> @@ -152,7 +152,7 @@ struct platform_device *__init imx_add_imx_uart_3irq(
> },
> };
>
> - return imx_add_platform_device("imx-uart", data->id, res,
> + return imx_add_platform_device("imx1-uart", data->id, res,
> ARRAY_SIZE(res), pdata, sizeof(*pdata));
> }
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 22fe801..ddebb5c 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -48,7 +48,6 @@
>
> #include <asm/io.h>
> #include <asm/irq.h>
> -#include <mach/hardware.h>
> #include <mach/imx-uart.h>
>
> /* Register definitions */
> @@ -66,8 +65,9 @@
> #define UBIR 0xa4 /* BRM Incremental Register */
> #define UBMR 0xa8 /* BRM Modulator Register */
> #define UBRC 0xac /* Baud Rate Count Register */
> -#define MX2_ONEMS 0xb0 /* One Millisecond register */
> -#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
> +#define IMX_ONEMS 0xb0 /* One Millisecond register */
> +#define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
> +#define IMX_UTS 0xb4 /* UART Test Register on all other i.mx*/
>
> /* UART Control Register Bit Fields.*/
> #define URXD_CHARRDY (1<<15)
> @@ -87,7 +87,7 @@
> #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
> #define UCR1_SNDBRK (1<<4) /* Send break */
> #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
> -#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */
> +#define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
> #define UCR1_DOZE (1<<1) /* Doze */
> #define UCR1_UARTEN (1<<0) /* UART enabled */
> #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
> @@ -113,9 +113,7 @@
> #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
> #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
> #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
> -#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
> -#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
> -#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
> +#define IMX_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
> #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
> #define UCR3_BPEN (1<<0) /* Preset registers enable */
> #define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
> @@ -181,6 +179,17 @@
>
> #define UART_NR 8
>
> +enum imx_uart_type {
> + IMX1_UART,
> + IMX_UART,
> +};
> +
> +/* device type dependent stuff */
> +struct imx_uart_data {
> + unsigned uts_reg;
> + enum imx_uart_type devtype;
> +};
> +
> struct imx_port {
> struct uart_port port;
> struct timer_list timer;
> @@ -192,6 +201,7 @@ struct imx_port {
> unsigned int irda_inv_tx:1;
> unsigned short trcv_delay; /* transceiver delay */
> struct clk *clk;
> + struct imx_uart_data *devdata;
> };
>
> #ifdef CONFIG_IRDA
> @@ -200,6 +210,33 @@ struct imx_port {
> #define USE_IRDA(sport) (0)
> #endif
>
> +#define UTS (sport->devdata->uts_reg)
> +#define IS_IMX1_UART() (sport->devdata->devtype == IMX1_UART)
> +#define IS_IMX_UART() (sport->devdata->devtype == IMX_UART)
> +
> +static struct imx_uart_data imx_uart_devdata[] = {
> + [IMX1_UART] = {
> + .uts_reg = IMX1_UTS,
> + .devtype = IMX1_UART,
> + },
> + [IMX_UART] = {
> + .uts_reg = IMX_UTS,
> + .devtype = IMX_UART,
> + },
> +};
> +
> +static struct platform_device_id imx_uart_devtype[] = {
> + {
> + .name = "imx1-uart",
> + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
> + }, {
> + .name = "imx-uart",
> + .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX_UART],
> + }, {
> + /* sentinel */
> + }
> +};
> +
> /*
> * Handle any change of modem status signal since we were last called.
> */
> @@ -689,9 +726,9 @@ static int imx_startup(struct uart_port *port)
> }
> }
>
> - if (!cpu_is_mx1()) {
> + if (IS_IMX_UART()) {
> temp = readl(sport->port.membase + UCR3);
> - temp |= MX2_UCR3_RXDMUXSEL;
> + temp |= IMX_UCR3_RXDMUXSEL;
> writel(temp, sport->port.membase + UCR3);
> }
>
> @@ -923,9 +960,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
> writel(num, sport->port.membase + UBIR);
> writel(denom, sport->port.membase + UBMR);
>
> - if (!cpu_is_mx1())
> + if (IS_IMX_UART())
> writel(sport->port.uartclk / div / 1000,
> - sport->port.membase + MX2_ONEMS);
> + sport->port.membase + IMX_ONEMS);
>
> writel(old_ucr1, sport->port.membase + UCR1);
>
> @@ -1062,8 +1099,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
> ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
> old_ucr2 = readl(sport->port.membase + UCR2);
>
> - if (cpu_is_mx1())
> - ucr1 |= MX1_UCR1_UARTCLKEN;
> + if (IS_IMX1_UART())
> + ucr1 |= IMX1_UCR1_UARTCLKEN;
> ucr1 |= UCR1_UARTEN;
> ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
>
> @@ -1262,6 +1299,7 @@ static int serial_imx_probe(struct platform_device *pdev)
> init_timer(&sport->timer);
> sport->timer.function = imx_timeout;
> sport->timer.data = (unsigned long)sport;
> + sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data;
>
> sport->clk = clk_get(&pdev->dev, "uart");
> if (IS_ERR(sport->clk)) {
> @@ -1340,6 +1378,7 @@ static struct platform_driver serial_imx_driver = {
>
> .suspend = serial_imx_suspend,
> .resume = serial_imx_resume,
> + .id_table = imx_uart_devtype,
> .driver = {
> .name = "imx-uart",
> .owner = THIS_MODULE,
> --
> 1.7.4.1
>
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
More information about the linux-arm-kernel
mailing list