[PATCH v2 5/5] OMAP4: powerdomain data: Remove unsupported MPU powerdomain state

Benoit Cousson b-cousson at ti.com
Fri Jul 1 16:27:40 EDT 2011


From: Santosh Shilimkar <santosh.shilimkar at ti.com>

On OMAP4430 devices, because of boot ROM code bug, MPU OFF state can't
be attempted independently. When coming out of MPU OFF state, ROM code
disables the clocks of IVAHD, TESLA which is not desirable. Hence the
MPU OFF state is not usable on OMAP4430 devices.

OMAP4460 onwards, MPU OFF state will be descoped completely because
the DDR firewall falls in MPU power domain. When the MPU hit OFF state,
DDR won't be accessible for other initiators. The deepest state supported
is open switch retention (OSWR) just like CORE and PER PD on OMAP4430.

So in summary MPU power domain OFF state is not supported on OMAP4
and onwards designs. Thanks to new PRCM design, device off mode can
still be achieved with power domains hitting OSWR state.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Signed-off-by: Rajendra Nayak <rnayak at ti.com>
[b-cousson at ti.com: Fix changelog typos]
Signed-off-by: Benoit Cousson <b-cousson at ti.com>
Cc: Paul Walmsley <paul at pwsan.com>
---
 arch/arm/mach-omap2/powerdomains44xx_data.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 8f46e7d..247e794 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -205,7 +205,7 @@ static struct powerdomain mpu_44xx_pwrdm = {
 	.prcm_offs	  = OMAP4430_PRM_MPU_INST,
 	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 3,
 	.pwrsts_mem_ret	= {
-- 
1.7.0.4




More information about the linux-arm-kernel mailing list