[PATCH V3] mmc: Enable the ADMA2 on esdhc imx driver

[Pavel Machek]

On Tue 2011-07-12 18:18:43, Anton Vorontsov wrote:
> On Tue, Jul 12, 2011 at 03:46:02PM +0200, Sascha Hauer wrote:
> [...]
> > Honestly, putting all kinds of driver logic into the register access
> > functions will lead to a catastrophe sooner or later. There are too
> > many quirks in it already, we should not add more of them.
> 
> There aren't many options. You may pollute generic driver with
> quirks (which is not an option :-), or you can introduce more
> ops for things like sdhci_send_command(), but in that case
> you will duplicate the logic just to compensate minor register
> differences.
> 
> In some cases, e.g. capabilities register, it seems that introducing
> get_caps() op would be a logical step, but then you just move the code
> under 'if (reg == SDHCI_CAPABILITIES) { ' into a dedicated function.
> No big difference.

Actually, there is huge difference. Generic code does
read-modify-write on the hw registers. And people only implement fixup
in write, for example :-(.
								Pavel