[PATCH] davinci: fix DM365 EVM video input mux bits

[Jon Povey]

Video input mux settings for tvp7002 and imager inputs were swapped.
Comment was correct.

Tested on EVM with tvp7002 input.

Signed-off-by: Jon Povey <jon.povey at racelogic.co.uk>
---
As a bugfix maybe this should try to get into 3.0?

 arch/arm/mach-davinci/board-dm365-evm.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index c67f684..09a87e6 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -520,7 +520,7 @@ fail:
 	 */
 	if (have_imager()) {
 		label = "HD imager";
-		mux |= 1;
+		mux |= 2;
 
 		/* externally mux MMC1/ENET/AIC33 to imager */
 		mux |= BIT(6) | BIT(5) | BIT(3);
@@ -540,7 +540,7 @@ fail:
 		resets &= ~BIT(1);
 
 		if (have_tvp7002()) {
-			mux |= 2;
+			mux |= 1;
 			resets &= ~BIT(2);
 			label = "tvp7002 HD";
 		} else {
-- 
1.6.3.3