[PATCH v2] gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming

[Shawn Guo]

The following commit renames irq_gc_ack() to irq_gc_ack_set_bit(),
and makes gpio-mxc and gpio-mxs fail to build.

  659fb32d1b67476f4ade25e9ea0e2642a5b9c4b5
  genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)

The patch fixed a couple of typo of comma to semicolon.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
Changes since v1:
 * Fix a couple of typo of comma to semicolon

 drivers/gpio/gpio-mxc.c |    4 ++--
 drivers/gpio/gpio-mxs.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 89fda58..4340aca 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -297,11 +297,11 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
 	gc->private = port;
 
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack,
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	ct->chip.irq_set_type = gpio_set_irq_type;
-	ct->chip.irq_set_wake = gpio_set_wake_irq,
+	ct->chip.irq_set_wake = gpio_set_wake_irq;
 	ct->regs.ack = GPIO_ISR;
 	ct->regs.mask = GPIO_IMR;
 
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index d8cafba..af55a85 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -156,11 +156,11 @@ static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port)
 	gc->private = port;
 
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack,
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	ct->chip.irq_set_type = mxs_gpio_set_irq_type;
-	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq,
+	ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
 	ct->regs.ack = PINCTRL_IRQSTAT(port->id) + MXS_CLR;
 	ct->regs.mask = PINCTRL_IRQEN(port->id);
 
-- 
1.7.4.1