[PATCH 04/15] ARM: pxa25x_udc: separate lubbock handling to lubbock-usb transceiver
Dmitry Eremin-Solenikov
dbaryshkov at gmail.com
Tue Jul 5 09:08:30 EDT 2011
Move all handling of lubbock board to separate lubbock-usb transceiver,
removing cruft from pxa25x_udc.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
Signed-off-by: Eric Miao <eric.y.miao at gmail.com>
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
---
drivers/usb/gadget/pxa25x_udc.c | 74 ----------------
drivers/usb/otg/Kconfig | 10 ++
drivers/usb/otg/Makefile | 1 +
drivers/usb/otg/lubbock-usb.c | 178 +++++++++++++++++++++++++++++++++++++++
4 files changed, 189 insertions(+), 74 deletions(-)
create mode 100644 drivers/usb/otg/lubbock-usb.c
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 7745454..6f543c7 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -66,10 +66,6 @@
#include <mach/pxa25x-udc.h>
#endif
-#ifdef CONFIG_ARCH_LUBBOCK
-#include <mach/lubbock.h>
-#endif
-
#include <asm/mach/udc_pxa2xx.h>
@@ -1384,42 +1380,6 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_ARCH_LUBBOCK
-
-/* Lubbock has separate connect and disconnect irqs. More typical designs
- * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
- */
-
-static irqreturn_t
-lubbock_vbus_irq(int irq, void *_dev)
-{
- struct pxa25x_udc *dev = _dev;
- int vbus;
-
- dev->stats.irqs++;
- switch (irq) {
- case LUBBOCK_USB_IRQ:
- vbus = 1;
- disable_irq(LUBBOCK_USB_IRQ);
- enable_irq(LUBBOCK_USB_DISC_IRQ);
- break;
- case LUBBOCK_USB_DISC_IRQ:
- vbus = 0;
- disable_irq(LUBBOCK_USB_DISC_IRQ);
- enable_irq(LUBBOCK_USB_IRQ);
- break;
- default:
- return IRQ_NONE;
- }
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
- return IRQ_HANDLED;
-}
-
-#endif
-
-
-/*-------------------------------------------------------------------------*/
static inline void clear_ep_state (struct pxa25x_udc *dev)
{
@@ -2207,38 +2167,10 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
}
dev->got_irq = 1;
-#ifdef CONFIG_ARCH_LUBBOCK
- if (machine_is_lubbock()) {
- retval = request_irq(LUBBOCK_USB_DISC_IRQ,
- lubbock_vbus_irq,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
- driver_name, dev);
- if (retval != 0) {
- pr_err("%s: can't get irq %i, err %d\n",
- driver_name, LUBBOCK_USB_DISC_IRQ, retval);
- goto err_irq_lub;
- }
- retval = request_irq(LUBBOCK_USB_IRQ,
- lubbock_vbus_irq,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
- driver_name, dev);
- if (retval != 0) {
- pr_err("%s: can't get irq %i, err %d\n",
- driver_name, LUBBOCK_USB_IRQ, retval);
- goto lubbock_fail0;
- }
- } else
-#endif
create_debug_files(dev);
return 0;
-#ifdef CONFIG_ARCH_LUBBOCK
-lubbock_fail0:
- free_irq(LUBBOCK_USB_DISC_IRQ, dev);
- err_irq_lub:
- free_irq(irq, dev);
-#endif
err_irq1:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
@@ -2273,12 +2205,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
free_irq(platform_get_irq(pdev, 0), dev);
dev->got_irq = 0;
}
-#ifdef CONFIG_ARCH_LUBBOCK
- if (machine_is_lubbock()) {
- free_irq(LUBBOCK_USB_DISC_IRQ, dev);
- free_irq(LUBBOCK_USB_IRQ, dev);
- }
-#endif
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index c66481a..cf3a245 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -122,6 +122,16 @@ config AB8500_USB
This transceiver supports high and full speed devices plus,
in host mode, low speed.
+config LUBBOCK_USB
+ tristate "Intel DBPXA250 (Lubbock) Tranceiver Driver"
+ depends on ARCH_LUBBOCK
+ select USB_OTG_UTILS
+ help
+ Enable this to support the USB UDC connectivity on Intel DBPXA250
+ development platform (so-called Lubbock).
+ This driver is of no use for all other platforms, so if you are
+ using other board, you can safely say N here.
+
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 566655c..24d4e63 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -19,5 +19,6 @@ obj-$(CONFIG_USB_ULPI) += ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o
obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o
obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
+obj-$(CONFIG_LUBBOCK_USB) += lubbock-usb.o
fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o
obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o
diff --git a/drivers/usb/otg/lubbock-usb.c b/drivers/usb/otg/lubbock-usb.c
new file mode 100644
index 0000000..3ff8297
--- /dev/null
+++ b/drivers/usb/otg/lubbock-usb.c
@@ -0,0 +1,178 @@
+/*
+ * Intel DBPXA250 Development Platform USB UDC support
+ *
+ * Copyright (C) 2011 Dmitry Eremin-Solenikov
+ *
+ * Based on pxa25x_udc driver:
+ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
+ * Copyright (C) 2003 Robert Schwebel, Pengutronix
+ * Copyright (C) 2003 Benedikt Spranger, Pengutronix
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003 Joshua Wise
+ *
+ * Largely based on lubbock-usb-xceiv:
+ * Copyright (C) 2009 Texas Instruments Inc
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <mach/lubbock.h>
+
+static int lubbock_udc_is_connected(void)
+{
+ return (LUB_MISC_RD & (1 << 9)) == 0;
+}
+
+static int lubbock_set_peripheral(struct otg_transceiver *lubbock,
+ struct usb_gadget *gadget)
+{
+ if (!lubbock)
+ return -ENODEV;
+
+ if (!gadget) {
+ lubbock->gadget = NULL;
+ return 0;
+ }
+
+ lubbock->gadget = gadget;
+ lubbock->state = OTG_STATE_B_IDLE;
+ if (lubbock_udc_is_connected()) {
+ lubbock->state = OTG_STATE_B_PERIPHERAL;
+ usb_gadget_vbus_connect(lubbock->gadget);
+ }
+
+ return 0;
+}
+
+/* Lubbock has separate connect and disconnect irqs. More typical designs
+ * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
+ */
+
+static irqreturn_t
+lubbock_vbus_irq(int irq, void *_dev)
+{
+ struct otg_transceiver *lubbock = _dev;
+ switch (irq) {
+ case LUBBOCK_USB_IRQ:
+ lubbock->state = OTG_STATE_B_PERIPHERAL;
+ usb_gadget_vbus_connect(lubbock->gadget);
+
+ disable_irq(LUBBOCK_USB_IRQ);
+ enable_irq(LUBBOCK_USB_DISC_IRQ);
+ break;
+ case LUBBOCK_USB_DISC_IRQ:
+ usb_gadget_vbus_disconnect(lubbock->gadget);
+ lubbock->state = OTG_STATE_B_IDLE;
+
+ disable_irq(LUBBOCK_USB_DISC_IRQ);
+ enable_irq(LUBBOCK_USB_IRQ);
+ break;
+ default:
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+static int __devinit lubbock_usb_xceiv_probe(struct platform_device *pdev)
+{
+ struct otg_transceiver *lubbock;
+ int err;
+
+ lubbock = kzalloc(sizeof *lubbock, GFP_KERNEL);
+ if (!lubbock)
+ return -ENOMEM;
+
+ lubbock->dev = &pdev->dev;
+ lubbock->label = "lubbock-xceiv";
+ lubbock->state = OTG_STATE_UNDEFINED;
+ lubbock->set_peripheral = lubbock_set_peripheral;
+
+ err = request_irq(LUBBOCK_USB_DISC_IRQ,
+ lubbock_vbus_irq,
+ IRQF_DISABLED,
+ lubbock->label, lubbock);
+ if (err != 0) {
+ pr_err("%s: can't get irq %i, err %d\n",
+ lubbock->label, LUBBOCK_USB_DISC_IRQ, err);
+ goto err_irq_lub;
+ }
+ err = request_irq(LUBBOCK_USB_IRQ,
+ lubbock_vbus_irq,
+ IRQF_DISABLED,
+ lubbock->label, lubbock);
+ if (err != 0) {
+ pr_err("%s: can't get irq %i, err %d\n",
+ lubbock->label, LUBBOCK_USB_IRQ, err);
+ goto err_irq_lub2;
+ }
+
+ err = otg_set_transceiver(lubbock);
+ if (err) {
+ dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+ err);
+ goto exit;
+ }
+
+ platform_set_drvdata(pdev, lubbock);
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&lubbock->notifier);
+
+ return 0;
+exit:
+ free_irq(LUBBOCK_USB_IRQ, lubbock);
+err_irq_lub2:
+ free_irq(LUBBOCK_USB_DISC_IRQ, lubbock);
+err_irq_lub:
+ kfree(lubbock);
+ return err;
+}
+
+static int __devexit lubbock_usb_xceiv_remove(struct platform_device *pdev)
+{
+ struct otg_transceiver *lubbock = platform_get_drvdata(pdev);
+
+ otg_set_transceiver(NULL);
+
+ platform_set_drvdata(pdev, NULL);
+
+ free_irq(LUBBOCK_USB_IRQ, lubbock);
+ free_irq(LUBBOCK_USB_DISC_IRQ, lubbock);
+
+ kfree(lubbock);
+
+ return 0;
+}
+
+static struct platform_driver lubbock_usb_xceiv_driver = {
+ .probe = lubbock_usb_xceiv_probe,
+ .remove = __devexit_p(lubbock_usb_xceiv_remove),
+ .driver = {
+ .name = "lubbock_usb_xceiv",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init lubbock_usb_xceiv_init(void)
+{
+ return platform_driver_register(&lubbock_usb_xceiv_driver);
+}
+subsys_initcall(lubbock_usb_xceiv_init);
+
+static void __exit lubbock_usb_xceiv_exit(void)
+{
+ platform_driver_unregister(&lubbock_usb_xceiv_driver);
+}
+module_exit(lubbock_usb_xceiv_exit);
+
+MODULE_ALIAS("platform:lubbock_usb_xceiv");
+MODULE_DESCRIPTION("lubbock USB Transceiver driver");
+MODULE_LICENSE("GPL");
+
--
1.7.5.4
More information about the linux-arm-kernel
mailing list