[PATCHV2] OMAP4: OPP: add OMAP4460 definitions
Vishwanath Sripathy
vishwanath.bs at ti.com
Thu Jul 21 00:56:15 EDT 2011
My mailer seems to have goofed the from email-id. Pls ignore this email. I
have sent another patch correcting the same.
Vishwa
> -----Original Message-----
> From: yes at dbdp31.itg.ti.com [mailto:yes at dbdp31.itg.ti.com]
> Sent: Thursday, July 21, 2011 10:23 AM
> To: linux-omap at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org; Sripathy, Vishwanath;
> Nishanth Menon
> Subject: [PATCHV2] OMAP4: OPP: add OMAP4460 definitions
>
> From: Sripathy, Vishwanath <vishwanath.bs at ti.com>
>
> Add OMAP4460 OPP definitions for voltage and frequencies based on
> OMAP4460 ES1.0 DM Operating Condition Addendum Version 0.1
>
> The following exceptions are present:
> * Smartreflex support is still on experimental mode: the gains and
> min
> limits are currently pending characterization data. Currently
> OMAP4430 values
> are used.
> * Efuse offset for core OPP100-OV setting is not clear in
> documentation.
> * IVA OPPs beyond OPP100 are disabled due to the delta between max
> OMAP4460
> current requirements and Phoenix Max supply on VCORE2 in the
> default
> configuration - boards which have supply which can support this
> should
> explicitly call opp_enable and enable the same.
> * MPU OPPs > OPPTURBO can easily be detected using a efuse burnt -
> currently
> disabled pending clock changes to support DCC feature.
>
> [nm at ti.com: cleanups and updates from Datamanual]
> Signed-off-by: Nishanth Menon <nm at ti.com>
> Signed-off-by: Vishwanath BS <vishwanath.bs at ti.com>
> ---
> Patch is generated against latest lo master.
> Changes in V2: Updated the commit log as per Nishant's comments.
> Patch has some checkpatch warnings related to line over 80 chars.
> They have
> been retained to keep the readability of the code.
>
> arch/arm/mach-omap2/control.h | 1 +
> arch/arm/mach-omap2/omap_opp_data.h | 9 ++-
> arch/arm/mach-omap2/opp4xxx_data.c | 96
> ++++++++++++++++++++++---
> arch/arm/mach-omap2/voltagedomains44xx_data.c | 14 +++-
> 4 files changed, 105 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-
> omap2/control.h
> index a016c8b..a41b9a7 100644
> --- a/arch/arm/mach-omap2/control.h
> +++ b/arch/arm/mach-omap2/control.h
> @@ -195,6 +195,7 @@
> #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO 0x249
> #define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254
> #define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257
> +#define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV 0x25A
>
> /* AM35XX only CONTROL_GENERAL register offsets */
> #define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL +
> 0x0038)
> diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-
> omap2/omap_opp_data.h
> index c784c12..18a750e 100644
> --- a/arch/arm/mach-omap2/omap_opp_data.h
> +++ b/arch/arm/mach-omap2/omap_opp_data.h
> @@ -89,8 +89,11 @@ extern struct omap_volt_data
> omap34xx_vddcore_volt_data[];
> extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
> extern struct omap_volt_data omap36xx_vddcore_volt_data[];
>
> -extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[];
> -extern struct omap_volt_data omap44xx_vdd_iva_volt_data[];
> -extern struct omap_volt_data omap44xx_vdd_core_volt_data[];
> +extern struct omap_volt_data omap443x_vdd_mpu_volt_data[];
> +extern struct omap_volt_data omap443x_vdd_iva_volt_data[];
> +extern struct omap_volt_data omap443x_vdd_core_volt_data[];
> +extern struct omap_volt_data omap446x_vdd_mpu_volt_data[];
> +extern struct omap_volt_data omap446x_vdd_iva_volt_data[];
> +extern struct omap_volt_data omap446x_vdd_core_volt_data[];
>
> #endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */
> diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-
> omap2/opp4xxx_data.c
> index 2293ba2..8c285e4 100644
> --- a/arch/arm/mach-omap2/opp4xxx_data.c
> +++ b/arch/arm/mach-omap2/opp4xxx_data.c
> @@ -1,7 +1,7 @@
> /*
> * OMAP4 OPP table definitions.
> *
> - * Copyright (C) 2010 Texas Instruments Incorporated -
> http://www.ti.com/
> + * Copyright (C) 2010-2011 Texas Instruments Incorporated -
> http://www.ti.com/
> * Nishanth Menon
> * Kevin Hilman
> * Thara Gopinath
> @@ -36,7 +36,7 @@
> #define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000
> #define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000
>
> -struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
> +struct omap_volt_data omap443x_vdd_mpu_volt_data[] = {
> VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV,
> OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
> VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV,
> OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
> VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV,
> OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
> @@ -48,7 +48,7 @@ struct omap_volt_data omap44xx_vdd_mpu_volt_data[]
> = {
> #define OMAP4430_VDD_IVA_OPP100_UV 1188000
> #define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000
>
> -struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
> +struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
> VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV,
> OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
> VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV,
> OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
> VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV,
> OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
> @@ -58,14 +58,14 @@ struct omap_volt_data
> omap44xx_vdd_iva_volt_data[] = {
> #define OMAP4430_VDD_CORE_OPP50_UV 1025000
> #define OMAP4430_VDD_CORE_OPP100_UV 1200000
>
> -struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
> +struct omap_volt_data omap443x_vdd_core_volt_data[] = {
> VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV,
> OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
> VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV,
> OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
> VOLT_DATA_DEFINE(0, 0, 0, 0),
> };
>
>
> -static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
> +static struct omap_opp_def __initdata omap443x_opp_def_list[] = {
> /* MPU OPP1 - OPP50 */
> OPP_INITIALIZER("mpu", true, 300000000,
> OMAP4430_VDD_MPU_OPP50_UV),
> /* MPU OPP2 - OPP100 */
> @@ -87,6 +87,82 @@ static struct omap_opp_def __initdata
> omap44xx_opp_def_list[] = {
> /* TODO: add DSP, aess, fdif, gpu */
> };
>
> +#define OMAP4460_VDD_MPU_OPP50_UV 1025000
> +#define OMAP4460_VDD_MPU_OPP100_UV 1200000
> +#define OMAP4460_VDD_MPU_OPPTURBO_UV 1313000
> +#define OMAP4460_VDD_MPU_OPPNITRO_UV 1375000
> +
> +struct omap_volt_data omap446x_vdd_mpu_volt_data[] = {
> + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP50_UV,
> OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP100_UV,
> OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPTURBO_UV,
> OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPNITRO_UV,
> OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
> + VOLT_DATA_DEFINE(0, 0, 0, 0),
> +};
> +
> +#define OMAP4460_VDD_IVA_OPP50_UV 1025000
> +#define OMAP4460_VDD_IVA_OPP100_UV 1200000
> +#define OMAP4460_VDD_IVA_OPPTURBO_UV 1313000
> +#define OMAP4460_VDD_IVA_OPPNITRO_UV 1375000
> +
> +struct omap_volt_data omap446x_vdd_iva_volt_data[] = {
> + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP50_UV,
> OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP100_UV,
> OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPTURBO_UV,
> OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPNITRO_UV,
> OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO, 0xfa, 0x23),
> + VOLT_DATA_DEFINE(0, 0, 0, 0),
> +};
> +
> +#define OMAP4460_VDD_CORE_OPP50_UV 1025000
> +#define OMAP4460_VDD_CORE_OPP100_UV 1200000
> +#define OMAP4460_VDD_CORE_OPP100_OV_UV 1250000
> +
> +struct omap_volt_data omap446x_vdd_core_volt_data[] = {
> + VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP50_UV,
> OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_UV,
> OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
> + VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_OV_UV,
> OMAP44XX_CONTROL_FUSE_CORE_OPP100OV, 0xf9, 0x16),
> + VOLT_DATA_DEFINE(0, 0, 0, 0),
> +};
> +
> +static struct omap_opp_def __initdata omap446x_opp_def_list[] = {
> + /* MPU OPP1 - OPP50 */
> + OPP_INITIALIZER("mpu", true, 350000000,
> OMAP4460_VDD_MPU_OPP50_UV),
> + /* MPU OPP2 - OPP100 */
> + OPP_INITIALIZER("mpu", true, 700000000,
> OMAP4460_VDD_MPU_OPP100_UV),
> + /* MPU OPP3 - OPP-Turbo */
> + OPP_INITIALIZER("mpu", true, 920000000,
> OMAP4460_VDD_MPU_OPPTURBO_UV),
> + /*
> + * MPU OPP4 - OPP-Nitro + Disabled as the reference schematics
> + * recommends TPS623631 - confirm and enable the opp in board
> file
> + * XXX: May be we should enable these based on mpu capability
> and
> + * Exception board files disable it...
> + */
> + OPP_INITIALIZER("mpu", false, 1200000000,
> OMAP4460_VDD_MPU_OPPNITRO_UV),
> + /* MPU OPP4 - OPP-Nitro SpeedBin */
> + OPP_INITIALIZER("mpu", false, 1500000000,
> OMAP4460_VDD_MPU_OPPNITRO_UV),
> + /* L3 OPP1 - OPP50 */
> + OPP_INITIALIZER("l3_main_1", true, 100000000,
> OMAP4460_VDD_CORE_OPP50_UV),
> + /* L3 OPP2 - OPP100 */
> + OPP_INITIALIZER("l3_main_1", true, 200000000,
> OMAP4460_VDD_CORE_OPP100_UV),
> + /* IVA OPP1 - OPP50 */
> + OPP_INITIALIZER("iva", true, 133000000,
> OMAP4460_VDD_IVA_OPP50_UV),
> + /* IVA OPP2 - OPP100 */
> + OPP_INITIALIZER("iva", true, 266100000,
> OMAP4460_VDD_IVA_OPP100_UV),
> + /*
> + * IVA OPP3 - OPP-Turbo + Disabled as the reference schematics
> + * recommends Phoenix VCORE2 which can supply only 600mA - so
> the ones
> + * above this OPP frequency, even though OMAP is capable,
> should be
> + * enabled by board file which is sure of the chip power
> capability
> + */
> + OPP_INITIALIZER("iva", false, 332000000,
> OMAP4460_VDD_IVA_OPPTURBO_UV),
> + /* IVA OPP4 - OPP-Nitro */
> + OPP_INITIALIZER("iva", false, 430000000,
> OMAP4460_VDD_IVA_OPPNITRO_UV),
> + /* IVA OPP5 - OPP-Nitro SpeedBin*/
> + OPP_INITIALIZER("iva", false, 500000000,
> OMAP4460_VDD_IVA_OPPNITRO_UV),
> +
> + /* TODO: add DSP, aess, fdif, gpu */
> +};
> +
> /**
> * omap4_opp_init() - initialize omap4 opp table
> */
> @@ -96,10 +172,12 @@ int __init omap4_opp_init(void)
>
> if (!cpu_is_omap44xx())
> return r;
> -
> - r = omap_init_opp_table(omap44xx_opp_def_list,
> - ARRAY_SIZE(omap44xx_opp_def_list));
> -
> + if (cpu_is_omap443x())
> + r = omap_init_opp_table(omap443x_opp_def_list,
> + ARRAY_SIZE(omap443x_opp_def_list));
> + else if (cpu_is_omap446x())
> + r = omap_init_opp_table(omap446x_opp_def_list,
> + ARRAY_SIZE(omap446x_opp_def_list));
> return r;
> }
> device_initcall(omap4_opp_init);
> diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c
> b/arch/arm/mach-omap2/voltagedomains44xx_data.c
> index cb64996..f516cfe 100644
> --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
> +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
> @@ -91,9 +91,17 @@ static int __init
> omap44xx_voltage_early_init(void)
> * XXX Will depend on the process, validation, and binning
> * for the currently-running IC
> */
> - omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data;
> - omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
> - omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
> + if (cpu_is_omap443x()) {
> + omap4_vdd_mpu_info.volt_data =
> omap443x_vdd_mpu_volt_data;
> + omap4_vdd_iva_info.volt_data =
> omap443x_vdd_iva_volt_data;
> + omap4_vdd_core_info.volt_data =
> omap443x_vdd_core_volt_data;
> + } else if (cpu_is_omap446x()) {
> + omap4_vdd_mpu_info.volt_data =
> omap446x_vdd_mpu_volt_data;
> + omap4_vdd_iva_info.volt_data =
> omap446x_vdd_iva_volt_data;
> + omap4_vdd_core_info.volt_data =
> omap446x_vdd_core_volt_data;
> + } else {
> + return -ENODATA;
> + }
>
> return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
> omap4_vdd_info,
> --
> 1.7.0.4
More information about the linux-arm-kernel
mailing list