[GIT PULL] omap twl cleanup for v3.1 merge window

[Arnd Bergmann]

On Friday 08 July 2011, Tony Lindgren wrote:
>
>I've attached a conflict resolution patch too, it's trivial execpt
>note that .vdac needs to be removed in board-rx51-peripherals.c.
>
>If this conflict causes problems for you, I can also base this series
>on omap/board.

The conflict resolution you suggested doesn't build here:

> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@@ -572,75 -395,10 +509,62 @@@ static struct regulator_init_data sdp44
>         },
>   };
>   
>  +static struct regulator_init_data sdp4430_vana = {
>  +      .constraints = {
>  +              .min_uV                 = 2100000,
>  +              .max_uV                 = 2100000,
>  +              .valid_modes_mask       = REGULATOR_MODE_NORMAL
>  +                                      | REGULATOR_MODE_STANDBY,
>  +              .valid_ops_mask  = REGULATOR_CHANGE_MODE
>  +                                      | REGULATOR_CHANGE_STATUS,
>  +      },
>  +};
>  +
>  +static struct regulator_init_data sdp4430_vcxio = {
>  +      .constraints = {
>  +              .min_uV                 = 1800000,
>  +              .max_uV                 = 1800000,
>  +              .valid_modes_mask       = REGULATOR_MODE_NORMAL
>  +                                      | REGULATOR_MODE_STANDBY,
>  +              .valid_ops_mask  = REGULATOR_CHANGE_MODE
>  +                                      | REGULATOR_CHANGE_STATUS,
>  +      },
>  +};
>  +
>  +static struct regulator_init_data sdp4430_vdac = {
>  +      .constraints = {
>  +              .min_uV                 = 1800000,
>  +              .max_uV                 = 1800000,
>  +              .valid_modes_mask       = REGULATOR_MODE_NORMAL
>  +                                      | REGULATOR_MODE_STANDBY,
>  +              .valid_ops_mask  = REGULATOR_CHANGE_MODE
>  +                                      | REGULATOR_CHANGE_STATUS,
>  +      },
>  +};
>  +
>  +static struct regulator_init_data sdp4430_vusb = {
>  +      .constraints = {
>  +              .min_uV                 = 3300000,
>  +              .max_uV                 = 3300000,
>  +              .apply_uV               = true,
>  +              .valid_modes_mask       = REGULATOR_MODE_NORMAL
>  +                                      | REGULATOR_MODE_STANDBY,
>  +              .valid_ops_mask  =      REGULATOR_CHANGE_MODE
>  +                                      | REGULATOR_CHANGE_STATUS,
>  +      },
>  +};
>  +
>  +static struct regulator_init_data sdp4430_clk32kg = {
>  +      .constraints = {
>  +              .valid_ops_mask         = REGULATOR_CHANGE_STATUS,
>  +              .always_on              = true,
>  +      },
>  +};

These are removed in the cleanup series, but changed in the fixes branch,
now the removal is undone

>   static struct twl4030_platform_data sdp4430_twldata = {
> -       .irq_base       = TWL6030_IRQ_BASE,
> -       .irq_end        = TWL6030_IRQ_END,
> - 
>         /* Regulators */
> -       .vmmc           = &sdp4430_vmmc,
> -       .vpp            = &sdp4430_vpp,
>         .vusim          = &sdp4430_vusim,
> -       .vana           = &sdp4430_vana,
> -       .vcxio          = &sdp4430_vcxio,
> -       .vdac           = &sdp4430_vdac,
> -       .vusb           = &sdp4430_vusb,
>         .vaux1          = &sdp4430_vaux1,
> -       .vaux2          = &sdp4430_vaux2,
> -       .vaux3          = &sdp4430_vaux3,
> -       .clk32kg        = &sdp4430_clk32kg,
> -       .usb            = &omap4_usbphy_data
>   };
>   

but the references remain.

I tried a different path, but then got

arch/arm/mach-omap2/board-4430sdp.c:406:41: warning: 'sdp4430_vmmc_supply' defined but not used [-Wunused-variable]

Should that variable be removed or kept referenced?

	Arnd