[PATCH 4/7] tty: serial: support device tree in pxa
Haojian Zhuang
haojian.zhuang at marvell.com
Mon Jul 18 22:24:47 EDT 2011
Support both normal platform driver and device tree driver in serial pxa.
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
---
drivers/tty/serial/Kconfig | 4 +-
drivers/tty/serial/of_serial.c | 12 +++++
drivers/tty/serial/pxa.c | 93 ++++++++++++++++++++++++++++++++++++++-
include/linux/serial_pxa.h | 17 +++++++
4 files changed, 122 insertions(+), 4 deletions(-)
create mode 100644 include/linux/serial_pxa.h
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 636144c..3f75e0d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -663,6 +663,8 @@ config SERIAL_MPSC_CONSOLE
config SERIAL_PXA
bool "PXA serial port support"
depends on ARCH_PXA || ARCH_MMP
+ select SERIAL_OF_PLATFORM
+ select SERIAL_CORE_CONSOLE
select SERIAL_CORE
help
If you have a machine based on an Intel XScale PXA2xx CPU you
@@ -1340,7 +1342,7 @@ config SERIAL_NETX_CONSOLE
config SERIAL_OF_PLATFORM
tristate "Serial port on Open Firmware platform bus"
depends on OF
- depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
+ depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL || SERIAL_PXA
help
If you have a PowerPC based system that has serial ports
on a platform specific bus, you should enable this option.
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e65f1e8..83e07fb 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
+#include <linux/serial_pxa.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -126,6 +127,11 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
ret = nwpserial_register_port(&port);
break;
#endif
+#ifdef CONFIG_SERIAL_PXA
+ case PORT_PXA:
+ ret = serial_pxa_register_port(&port);
+ break;
+#endif
default:
/* need to add code for these */
case PORT_UNKNOWN:
@@ -163,6 +169,11 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
nwpserial_unregister_port(info->line);
break;
#endif
+#ifdef CONFIG_SERIAL_PXA
+ case PORT_PXA:
+ serial_pxa_unregister_port(info->line);
+ break;
+#endif
default:
/* need to add code for these */
break;
@@ -186,6 +197,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
#endif
+ { .compatible = "mrvl,pxa270-serial", .data = (void *)PORT_PXA, },
{ .type = "serial", .data = (void *)PORT_UNKNOWN, },
{ /* end of list */ },
};
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 4302e6e..8f4d538 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -36,10 +36,12 @@
#include <linux/circ_buf.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <linux/serial_pxa.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -54,6 +56,10 @@ struct uart_pxa_port {
char *name;
};
+#define PXA_SERIAL_NR 4
+
+static DEFINE_MUTEX(serial_pxa_mutex);
+
static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
{
offset <<= 2;
@@ -346,8 +352,6 @@ static int serial_pxa_startup(struct uart_port *port)
else
up->mcr = 0;
- up->port.uartclk = clk_get_rate(up->clk);
-
/*
* Allocate the IRQ
*/
@@ -593,7 +597,7 @@ serial_pxa_type(struct uart_port *port)
return up->name;
}
-static struct uart_pxa_port *serial_pxa_ports[4];
+static struct uart_pxa_port *serial_pxa_ports[PXA_SERIAL_NR];
static struct uart_driver serial_pxa_reg;
#ifdef CONFIG_SERIAL_PXA_CONSOLE
@@ -761,6 +765,89 @@ static const struct dev_pm_ops serial_pxa_pm_ops = {
};
#endif
+static int serial_pxa_port_size(struct uart_pxa_port *sport)
+{
+ return 8 << sport->port.regshift;
+}
+
+int serial_pxa_register_port(struct uart_port *port)
+{
+ struct uart_pxa_port *sport = NULL;
+ char name[32];
+ int i, ret;
+
+ mutex_lock(&serial_pxa_mutex);
+ for (i = 0; i < PXA_SERIAL_NR; i++) {
+ if (serial_pxa_ports[i] != NULL)
+ continue;
+ sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
+ if (!sport) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ switch (i) {
+ case 0: sport->name = "FFUART"; break;
+ case 1: sport->name = "BTUART"; break;
+ case 2: sport->name = "STUART"; break;
+ case 3: sport->name = "HWUART"; break;
+ default:
+ sport->name = "???";
+ break;
+ }
+ break;
+ }
+ if (i >= PXA_SERIAL_NR) {
+ pr_warn("can't find pxa serial port\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ sprintf(name, "pxa2xx-uart.%d", i);
+ sport->clk = clk_get_sys(name, NULL);
+ if (IS_ERR(sport->clk)) {
+ ret = PTR_ERR(sport->clk);
+ goto out_clk;
+ }
+ memcpy(&sport->port, port, sizeof(struct uart_port));
+ sport->port.line = i;
+ sport->port.fifosize = 64;
+ sport->port.ops = &serial_pxa_pops;
+
+ sport->port.membase = ioremap(sport->port.mapbase,
+ serial_pxa_port_size(sport));
+ if (!sport->port.membase) {
+ ret = -ENOMEM;
+ goto out_membase;
+ }
+
+ serial_pxa_ports[i] = sport;
+
+ uart_add_one_port(&serial_pxa_reg, &sport->port);
+ mutex_unlock(&serial_pxa_mutex);
+
+ return sport->port.line;
+
+out_membase:
+ clk_put(sport->clk);
+out_clk:
+ kfree(sport);
+out:
+ mutex_unlock(&serial_pxa_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(serial_pxa_register_port);
+
+void serial_pxa_unregister_port(int line)
+{
+ struct uart_pxa_port *sport = serial_pxa_ports[line];
+
+ mutex_lock(&serial_pxa_mutex);
+ uart_remove_one_port(&serial_pxa_reg, &sport->port);
+ sport->port.type = PORT_UNKNOWN;
+ clk_put(sport->clk);
+ mutex_unlock(&serial_pxa_mutex);
+}
+
static int serial_pxa_probe(struct platform_device *dev)
{
struct uart_pxa_port *sport;
diff --git a/include/linux/serial_pxa.h b/include/linux/serial_pxa.h
new file mode 100644
index 0000000..565e510
--- /dev/null
+++ b/include/linux/serial_pxa.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/linux/serial_8250.h
+ *
+ * Marvell Semiconductor Inc.
+ * Copyright (C) 2011
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _LINUX_SERIAL_PXA_H
+#define _LINUX_SERIAL_PXA_H
+
+extern int serial_pxa_register_port(struct uart_port *);
+extern void serial_pxa_unregister_port(int);
+#endif
--
1.5.6.5
More information about the linux-arm-kernel
mailing list