[PATCH] i2c: pxa: create dynamic platform device from device tree
Grant Likely
grant.likely at secretlab.ca
Sun Jul 10 01:26:21 EDT 2011
On Fri, Jul 08, 2011 at 06:20:23PM +0800, Haojian Zhuang wrote:
> Create two probe function to support both current platform device and created
> dynamic platform device from device tree. After moving to device tree,
> original implementation of platform device will be removed.
>
> Use property to present polling mode and frequency mode.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
> ---
> drivers/i2c/busses/i2c-pxa.c | 163 ++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 163 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
> index d603646..7a6d774 100644
> --- a/drivers/i2c/busses/i2c-pxa.c
> +++ b/drivers/i2c/busses/i2c-pxa.c
> @@ -29,6 +29,7 @@
> #include <linux/errno.h>
> #include <linux/interrupt.h>
> #include <linux/i2c-pxa.h>
> +#include <linux/of_device.h>
> #include <linux/of_i2c.h>
> #include <linux/platform_device.h>
> #include <linux/err.h>
> @@ -1044,6 +1045,162 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
> .functionality = i2c_pxa_functionality,
> };
>
> +static const struct of_device_id pxa_i2c_of_match[] = {
> + { .compatible = "pxa2xx-i2c", .data = (void *)REGS_PXA2XX, },
> + { .compatible = "pxa3xx-pwri2c", .data = (void *)REGS_PXA3XX, },
> + { .compatible = "ce4100-i2c", .data = (void *)REGS_CE4100, },
New compatible values need to be written up in
Documentation/devicetree/bindings, and strings should be in the form
"<vendor>,<soc>-i2c". They should also be specific to the soc instead
of trying to be generic (ie. use "marvell,pxa255-i2c" instead of
"marvell,pxa2xx-i2c".
> + {},
> +};
> +
> +#ifdef CONFIG_OF
> +static int i2c_pxa_of_probe(struct platform_device *of_dev)
> +{
CONFIG_OF should not be an either/or option. Turning on CONFIG_OF
must not disable non-DT users.
> + struct device_node *np = of_dev->dev.of_node;
> + const struct of_device_id *match;
> + struct i2c_pxa_platform_data *plat = NULL;
> + struct pxa_i2c *i2c;
> + struct resource *res;
> + const __be32 *p;
> + int i2c_type, irq, data, ret;
> + int id = 0, poll = 0, fast = 0;
> +
> + match = of_match_device(pxa_i2c_of_match, &of_dev->dev);
> + if (match == NULL)
> + return -ENODEV;
> + i2c_type = (int)match->data;
> +
> + p = of_get_property(np, "cell-index", &data);
> + if (p)
> + id = be32_to_cpu(*p);
When using the device tree, the bus id should be dynamically
assigned. Don't use a cell-index property.
> +
> + p = of_get_property(np, "i2c-polling", &data);
> + if (p)
> + poll = be32_to_cpu(*p);
> +
> + p = of_get_property(np, "i2c-frequency", &data);
> + if (p && !strncmp((char *)p, "fast", data))
> + fast = 1;
> +
> + res = platform_get_resource(of_dev, IORESOURCE_MEM, 0);
> + irq = platform_get_irq(of_dev, 0);
> + if (res == NULL || irq < 0)
> + return -ENODEV;
> +
> + if (!request_mem_region(res->start, resource_size(res), res->name))
> + return -ENOMEM;
> +
> + i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
kzalloc(sizeof(*i2c), GFP_KERNEL)
> + if (!i2c) {
> + ret = -ENOMEM;
> + goto emalloc;
> + }
> +
> + i2c->adap.owner = THIS_MODULE;
> + i2c->adap.retries = 5;
> +
> + spin_lock_init(&i2c->lock);
> + init_waitqueue_head(&i2c->wait);
> +
> + /*
> + * adap.nr comes from cell-index in dts file
> + */
> + i2c->adap.nr = id;
> + snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa2xx-i2c.%u",
> + i2c->adap.nr);
> +
> + i2c->clk = clk_get_sys(i2c->adap.name, NULL);
> + if (IS_ERR(i2c->clk)) {
> + ret = PTR_ERR(i2c->clk);
> + goto eclk;
> + }
> +
> + i2c->reg_base = ioremap(res->start, resource_size(res));
> + if (!i2c->reg_base) {
> + ret = -EIO;
> + goto eremap;
> + }
> +
> + i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
> + i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
> + i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
> + i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
> + if (i2c_type != REGS_CE4100)
> + i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
> +
> + i2c->iobase = res->start;
> + i2c->iosize = resource_size(res);
> +
> + i2c->irq = irq;
> + i2c->use_pio = poll;
> + i2c->fast_mode = fast;
> +
> + i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
> +
> +#ifdef CONFIG_I2C_PXA_SLAVE
> + if (plat) {
> + i2c->slave_addr = plat->slave_addr;
> + i2c->slave = plat->slave;
> + }
> +#endif
> +
> + clk_enable(i2c->clk);
> +
> + if (plat)
> + i2c->adap.class = plat->class;
> +
> + if (i2c->use_pio) {
> + i2c->adap.algo = &i2c_pxa_pio_algorithm;
> + } else {
> + i2c->adap.algo = &i2c_pxa_algorithm;
> + ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED,
> + i2c->adap.name, i2c);
> + if (ret)
> + goto ereqirq;
> + }
> +
> + i2c_pxa_reset(i2c);
> +
> + i2c->adap.algo_data = i2c;
> + i2c->adap.dev.parent = &of_dev->dev;
> + i2c->adap.dev.of_node = of_dev->dev.of_node;
> +
> + if (i2c_type == REGS_CE4100)
> + ret = i2c_add_adapter(&i2c->adap);
> + else
> + ret = i2c_add_numbered_adapter(&i2c->adap);
> + if (ret < 0) {
> + printk(KERN_INFO "I2C: Failed to add bus\n");
> + goto eadapt;
> + }
> + of_i2c_register_devices(&i2c->adap);
> +
> + platform_set_drvdata(of_dev, i2c);
> +
> +#ifdef CONFIG_I2C_PXA_SLAVE
> + printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n",
> + dev_name(&i2c->adap.dev), i2c->slave_addr);
> +#else
> + printk(KERN_INFO "I2C: %s: PXA I2C adapter\n",
> + dev_name(&i2c->adap.dev));
> +#endif
> + return 0;
> +
> +eadapt:
> + if (!i2c->use_pio)
> + free_irq(irq, i2c);
> +ereqirq:
> + clk_disable(i2c->clk);
> + iounmap(i2c->reg_base);
> +eremap:
> + clk_put(i2c->clk);
> +eclk:
> + kfree(i2c);
> +emalloc:
> + release_mem_region(res->start, resource_size(res));
> + return ret;
> +}
> +#else
> +
> static int i2c_pxa_probe(struct platform_device *dev)
> {
> struct pxa_i2c *i2c;
> @@ -1174,6 +1331,7 @@ emalloc:
> release_mem_region(res->start, resource_size(res));
> return ret;
> }
> +#endif
>
> static int __exit i2c_pxa_remove(struct platform_device *dev)
> {
> @@ -1228,12 +1386,17 @@ static const struct dev_pm_ops i2c_pxa_dev_pm_ops = {
> #endif
>
> static struct platform_driver i2c_pxa_driver = {
> +#ifdef CONFIG_OF
> + .probe = i2c_pxa_of_probe,
> +#else
> .probe = i2c_pxa_probe,
> +#endif
> .remove = __exit_p(i2c_pxa_remove),
> .driver = {
> .name = "pxa2xx-i2c",
> .owner = THIS_MODULE,
> .pm = I2C_PXA_DEV_PM_OPS,
> + .of_match_table = pxa_i2c_of_match,
> },
> .id_table = i2c_pxa_id_table,
> };
> --
> 1.5.6.5
>
More information about the linux-arm-kernel
mailing list