[PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_*
Lei Wen
adrian.wenl at gmail.com
Wed Jul 13 08:41:53 EDT 2011
Hi Sergei,
On Wed, Jul 13, 2011 at 6:57 PM, Sergei Shtylyov <sshtylyov at mvista.com> wrote:
> Hello.
>
> On 12-07-2011 18:35, Lei Wen wrote:
>
>> Signed-off-by: Lei Wen<leiwen at marvell.com>
>> ---
>> drivers/mtd/nand/pxa3xx_nand.c | 27 ++++++++++++++++-----------
>> 1 files changed, 16 insertions(+), 11 deletions(-)
>
>> diff --git a/drivers/mtd/nand/pxa3xx_nand.c
>> b/drivers/mtd/nand/pxa3xx_nand.c
>> index 1efecf7..afe14bd 100644
>> --- a/drivers/mtd/nand/pxa3xx_nand.c
>> +++ b/drivers/mtd/nand/pxa3xx_nand.c
>
> [...]
>>
>> @@ -774,11 +774,15 @@ static int pxa3xx_nand_config_flash(struct
>> pxa3xx_nand_info *info,
>> struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
>> uint32_t ndcr = 0x0; /* enable all interrupts */
>>
>> - if (f->page_size != 2048 && f->page_size != 512)
>> + if (f->page_size != 2048 && f->page_size != 512) {
>> + dev_err(&pdev->dev, "Current only support 2048 and 512
>> size\n");
>> return -EINVAL;
>> + }
>>
>> - if (f->flash_width != 16 && f->flash_width != 8)
>> + if (f->flash_width != 16 && f->flash_width != 8) {
>> + dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");
>
> So this patch not only converts printk() to dev_*() calls, it also adds
> some dev_err() calls? This should have been mentioned in the change long at
> least...
What do you mean by "chang long"? Do you mean the cover letter or the
patch name?
Certainly it is a good suggest to show it in the change version list.
>
>> return -EINVAL;
>> + }
>>
>> /* calculate flash information */
>> info->cmdset =&default_cmdset;
>> @@ -898,7 +902,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>> if (!ret) {
>> kfree(mtd);
>> info->mtd = NULL;
>> - printk(KERN_INFO "There is no nand chip on cs 0!\n");
>> + dev_info(&info->pdev->dev, "There is no nand chip on cs
>> 0!\n");
>>
>> return -EINVAL;
>> }
>> @@ -906,11 +910,12 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
>> chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
>> id = *((uint16_t *)(info->data_buff));
>> if (id != 0)
>> - printk(KERN_INFO "Detect a flash id %x\n", id);
>> + dev_info(&info->pdev->dev, "Detect a flash id %x\n", id);
>> else {
>> kfree(mtd);
>> info->mtd = NULL;
>> - printk(KERN_WARNING "Read out ID 0, potential timing set
>> wrong!!\n");
>> + dev_warn(&info->pdev->dev, "Read out ID 0, "
>> + "potential timing set wrong!!\n");
>
> Don't break the string -- this prevents grepping for it.
Thanks, I would fix it.
Best regards,
Lei
More information about the linux-arm-kernel
mailing list