[PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_*

Sergei Shtylyov sshtylyov at mvista.com
Wed Jul 13 10:35:10 EDT 2011


Hello.

Lei Wen wrote:

>>> Signed-off-by: Lei Wen<leiwen at marvell.com>
>>> ---
>>>  drivers/mtd/nand/pxa3xx_nand.c |   27 ++++++++++++++++-----------
>>>  1 files changed, 16 insertions(+), 11 deletions(-)
>>> diff --git a/drivers/mtd/nand/pxa3xx_nand.c
>>> b/drivers/mtd/nand/pxa3xx_nand.c
>>> index 1efecf7..afe14bd 100644
>>> --- a/drivers/mtd/nand/pxa3xx_nand.c
>>> +++ b/drivers/mtd/nand/pxa3xx_nand.c
>> [...]
>>> @@ -774,11 +774,15 @@ static int pxa3xx_nand_config_flash(struct
>>> pxa3xx_nand_info *info,
>>>        struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
>>>        uint32_t ndcr = 0x0; /* enable all interrupts */
>>>
>>> -       if (f->page_size != 2048 && f->page_size != 512)
>>> +       if (f->page_size != 2048 && f->page_size != 512) {
>>> +               dev_err(&pdev->dev, "Current only support 2048 and 512
>>> size\n");
>>>                return -EINVAL;
>>> +       }
>>>
>>> -       if (f->flash_width != 16 && f->flash_width != 8)
>>> +       if (f->flash_width != 16 && f->flash_width != 8) {
>>> +               dev_err(&pdev->dev, "Only support 8bit and 16 bit!\n");

>>   So this patch not only converts printk() to dev_*() calls, it also adds
>> some dev_err() calls? This should have been mentioned in the change long at
>> least...

> What do you mean by "chang long"? Do you mean the cover letter or the
> patch name?

    I mean the patch description (which in this patch is missing).

> Certainly it is a good suggest to show it in the change version list.

    Don't quite understand what you mean here...

> Best regards,
> Lei

WBR, Sergei



More information about the linux-arm-kernel mailing list