[PATCH 05/10] ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
Nicolas Pitre
nicolas.pitre at linaro.org
Tue Jul 5 22:30:37 EDT 2011
Signed-off-by: Nicolas Pitre <nicolas.pitre at linaro.org>
---
arch/arm/mach-ixp4xx/avila-setup.c | 6 ++++++
arch/arm/mach-ixp4xx/coyote-setup.c | 3 +++
arch/arm/mach-ixp4xx/dsmg600-setup.c | 3 +++
arch/arm/mach-ixp4xx/fsg-setup.c | 3 +++
arch/arm/mach-ixp4xx/gateway7001-setup.c | 3 +++
arch/arm/mach-ixp4xx/goramo_mlr.c | 3 +++
arch/arm/mach-ixp4xx/gtwx5715-setup.c | 3 +++
arch/arm/mach-ixp4xx/include/mach/memory.h | 4 ----
arch/arm/mach-ixp4xx/ixdp425-setup.c | 12 ++++++++++++
arch/arm/mach-ixp4xx/nas100d-setup.c | 3 +++
arch/arm/mach-ixp4xx/nslu2-setup.c | 3 +++
arch/arm/mach-ixp4xx/vulcan-setup.c | 3 +++
arch/arm/mach-ixp4xx/wg302v2-setup.c | 3 +++
13 files changed, 48 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 73745ff..05bf40d 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -169,6 +169,9 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = avila_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
/*
@@ -184,6 +187,9 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = avila_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 355e3de..0adf01b 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -114,6 +114,9 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = coyote_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index d398229..3eb8861 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -284,4 +284,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
.init_irq = ixp4xx_init_irq,
.timer = &dsmg600_timer,
.init_machine = dsmg600_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 727ee39..d26bd4b 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -275,5 +275,8 @@ MACHINE_START(FSG, "Freecom FSG-3")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = fsg_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 9dc0b4e..85e179e 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -101,5 +101,8 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = gateway7001_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 3e8c0e3..34955e8 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -501,4 +501,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = gmlr_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 77abead..283e128 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -169,6 +169,9 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = gtwx5715_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index 34e7940..4caf176 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -14,8 +14,4 @@
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
-#ifdef CONFIG_PCI
-#define ARM_DMA_ZONE_SIZE SZ_64M
-#endif
-
#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index dca4f7f..d89e11f 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -258,6 +258,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
@@ -269,6 +272,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
@@ -280,6 +286,9 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
@@ -291,5 +300,8 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index f18fee7..5cb107b 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -319,4 +319,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = nas100d_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index f79b62e..446375d 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -305,4 +305,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
.init_irq = ixp4xx_init_irq,
.timer = &nslu2_timer,
.init_machine = nslu2_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 4e72cfd..4a2d4e7 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -241,4 +241,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = vulcan_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 5d148c7..5397237 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -102,5 +102,8 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = wg302v2_init,
+#if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
--
1.7.4
More information about the linux-arm-kernel
mailing list