[PATCH 3/3] arch: arm: mach-cns3xxx: Add external interrupt pin demo program
Tommy Lin
tommy.lin.1101 at gmail.com
Thu Jul 28 13:17:55 EDT 2011
Add external interrupt pin configuration demo program to CNS3XXX
platform. The external interrupt pins are dedicate input pins that
direct connect to ARM MPCore GIC module.
Signed-off-by: Tommy Lin <tommy.lin.1101 at gmail.com>
---
arch/arm/configs/cns3420vb_defconfig | 1 +
arch/arm/mach-cns3xxx/Kconfig | 11 ++
arch/arm/mach-cns3xxx/Makefile | 1 +
arch/arm/mach-cns3xxx/ext_intr.c | 194 ++++++++++++++++++++++++++++++++++
4 files changed, 207 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-cns3xxx/ext_intr.c
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index c83d14c..6eefa7e 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -21,6 +21,7 @@ CONFIG_MODVERSIONS=y
CONFIG_IOSCHED_CFQ=m
CONFIG_ARCH_CNS3XXX=y
CONFIG_MACH_CNS3420VB=y
+CONFIG_CNS3XXX_EXT_INTR_DEMO=m
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 29b13f2..b4736e6 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -10,4 +10,15 @@ config MACH_CNS3420VB
This is a platform with an on-board ARM11 MPCore and has support
for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+config CNS3XXX_EXT_INTR_DEMO
+ tristate "External interrupt demo program"
+ depends on MACH_CNS3420VB
+ help
+ This program hook interrupt service routine to external interrupts
+ 0 ~ 3.
+ Name EVB Trigger ISR
+ Ext_Int0 Rising edge
+ Ext_Int1 Push button S3 Rising edge Toggle LED D6
+ Ext_Int2 Push button S4 High level Toggle LED D7
+
endmenu
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
index 7bb9c88..a610c59 100644
--- a/arch/arm/mach-cns3xxx/Makefile
+++ b/arch/arm/mach-cns3xxx/Makefile
@@ -2,3 +2,4 @@ obj-y += gpio.o
obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o devices.o
obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
+obj-$(CONFIG_CNS3XXX_EXT_INTR_DEMO) += ext_intr.o
diff --git a/arch/arm/mach-cns3xxx/ext_intr.c b/arch/arm/mach-cns3xxx/ext_intr.c
new file mode 100644
index 0000000..5127860
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/ext_intr.c
@@ -0,0 +1,194 @@
+/*******************************************************************************
+ *
+ * arch/arm/mach-cns3xxx/ext_intr.c
+ *
+ * External interrupt driver for the CNS3XXX SOCs
+ *
+ * Copyright (c) 2011 Cavium
+ * Tommy Lin <tommy.lin at caviumnetworks.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or
+ * visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium for more information
+ *
+ ******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <mach/gpio.h>
+#include <mach/cns3xxx.h>
+
+
+/* CNS3XXX has three external interrupt pins, Ext_Intr0, Ext_Intr1 and
+ * Ext_Intr3. Each pin has its own interrupt ID which is not shared with other
+ * function. It is not like 32 gpio pins in group A or B shared one irq. The
+ * external interrupt pins are special functions that shared with GPIOB[27:29].
+ * Users could turn on shared pin function to enable external interrupt pin with
+ * cns3xxx_sharepin_request API.
+ *
+ * The external interrupt trigger method is controlled by ARM MPCore GIC. GIC
+ * only suppot high active level trigger and rising edge trigger. Configure GIC
+ * with other trigger type will have no effect.
+ *
+ * Name irq Shared gpio pin
+ * Ext_Intr0 93 GPIOB[29]
+ * Ext_Intr1 94 GPIOB[28]
+ * Ext_Intr2 95 GPIOB[27]
+ */
+
+#define hw_debug(fmt, args...) printk(KERN_ERR ">>>>>> %s\t"\
+ fmt, __func__, ##args)
+
+struct ext_intr_data {
+ int irq;
+ unsigned gpio;
+ char *name;
+ char *alias;
+};
+
+static unsigned led_D6 = GPIOA(6);
+static unsigned led_D7 = GPIOA(5);
+
+static struct ext_intr_data eintr_data[] = {
+ {IRQ_CNS3XXX_EXTERNAL_PIN0, GPIOB(29), "Ext_Intr0", "HIB_REQ"},
+ {IRQ_CNS3XXX_EXTERNAL_PIN1, GPIOB(28), "Ext_Intr1", "Push Button S3"},
+ {IRQ_CNS3XXX_EXTERNAL_PIN2, GPIOB(27), "Ext_Intr2", "Push Button S4"},
+};
+
+static irqreturn_t cns3xxx_ext_intr0_handler(int irq, void *dev_id)
+{
+ struct ext_intr_data *data = dev_id;
+
+ printk(KERN_WARNING "%s detected!\n", data->alias);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t cns3xxx_ext_intr1_handler(int irq, void *dev_id)
+{
+ int value;
+
+ value = gpio_get_value(led_D6);
+
+ disable_irq_nosync(irq);
+
+ gpio_set_value(led_D6, !value);
+
+ enable_irq(irq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t cns3xxx_ext_intr2_handler(int irq, void *dev_id)
+{
+ int value;
+
+ value = gpio_get_value(led_D7);
+
+ disable_irq_nosync(irq);
+
+ gpio_set_value(led_D7, !value);
+
+ enable_irq(irq);
+
+ return IRQ_HANDLED;
+}
+
+int __init cns3xxx_eintr_init(void)
+{
+ int ret;
+
+ ret = gpio_request(led_D6, "INTR Test LED(D6)");
+ if (ret)
+ goto err1;
+ gpio_direction_output(led_D6, 0);
+
+ ret = gpio_request(led_D7, "INTR Test LED(D7)");
+ if (ret)
+ goto err2;
+ gpio_direction_output(led_D7, 0);
+
+ /************ Ext_Intr0 ************/
+ ret = cns3xxx_sharepin_request(eintr_data[0].gpio, eintr_data[0].alias);
+ if (ret)
+ goto err3;
+
+ ret = request_irq(eintr_data[0].irq, cns3xxx_ext_intr0_handler,
+ IRQF_SHARED | IRQF_TRIGGER_RISING,
+ eintr_data[0].name, &eintr_data[0]);
+ if (ret)
+ goto err4;
+
+ /************ Ext_Intr1 ************/
+ ret = cns3xxx_sharepin_request(eintr_data[1].gpio, eintr_data[1].alias);
+ if (ret)
+ goto err5;
+
+ ret = request_irq(eintr_data[1].irq, cns3xxx_ext_intr1_handler,
+ IRQF_SHARED | IRQF_TRIGGER_RISING,
+ eintr_data[1].name, &eintr_data[1]);
+ if (ret)
+ goto err6;
+
+ /************ Ext_Intr2 ************/
+ ret = cns3xxx_sharepin_request(eintr_data[2].gpio, eintr_data[2].alias);
+ if (ret)
+ goto err7;
+
+ ret = request_irq(eintr_data[2].irq, cns3xxx_ext_intr2_handler,
+ IRQF_SHARED | IRQF_TRIGGER_HIGH,
+ eintr_data[2].name, &eintr_data[2]);
+ if (ret)
+ goto err8;
+
+ return 0;
+
+err8:
+ cns3xxx_sharepin_free(eintr_data[2].gpio);
+err7:
+ free_irq(eintr_data[1].irq, &eintr_data[1]);
+err6:
+ cns3xxx_sharepin_free(eintr_data[1].gpio);
+err5:
+ free_irq(eintr_data[0].irq, &eintr_data[0]);
+err4:
+ cns3xxx_sharepin_free(eintr_data[0].gpio);
+err3:
+ gpio_free(led_D7);
+err2:
+ gpio_free(led_D6);
+err1:
+ return ret;
+}
+
+void __exit cns3xxx_eintr_exit(void)
+{
+ free_irq(eintr_data[2].irq, &eintr_data[2]);
+ free_irq(eintr_data[1].irq, &eintr_data[1]);
+ free_irq(eintr_data[0].irq, &eintr_data[0]);
+ cns3xxx_sharepin_free(eintr_data[2].gpio);
+ cns3xxx_sharepin_free(eintr_data[1].gpio);
+ cns3xxx_sharepin_free(eintr_data[0].gpio);
+ gpio_free(led_D7);
+ gpio_free(led_D6);
+}
+
+module_init(cns3xxx_eintr_init);
+module_exit(cns3xxx_eintr_exit);
+
+MODULE_LICENSE("GPL");
+
--
1.7.6
More information about the linux-arm-kernel
mailing list