[PATCH] ARM: cns3xxx: Add support for L2 Cache Controller
Anton Vorontsov
avorontsov at mvista.com
Wed Jul 6 10:08:32 EDT 2011
CNS3xxx SOCs have L310-compatible cache controller, so let's use it.
With this patch benchmarking with 'gzip' shows that performance is
doubled, and I'm still able to boot full-fledged userland over NFS
(using PCIe NIC), so the support should be pretty robust.
Signed-off-by: Anton Vorontsov <avorontsov at mvista.com>
---
I'm going to apply it to linux-cns3xxx.git tree and push it (via Arnd)
for v3.1 , if there will be no complains, of course.
Thanks,
arch/arm/mach-cns3xxx/cns3420vb.c | 2 +
arch/arm/mach-cns3xxx/core.c | 39 +++++++++++++++++++++++++++++++++++++
arch/arm/mach-cns3xxx/core.h | 1 +
arch/arm/mm/Kconfig | 2 +-
4 files changed, 43 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 08e5c87..4b804ba 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -170,6 +170,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = {
static void __init cns3420_init(void)
{
+ cns3xxx_l2x0_init();
+
platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
cns3xxx_ahci_init();
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index da30078..49f3a51 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -16,6 +16,7 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
#include <mach/cns3xxx.h>
#include "core.h"
@@ -244,3 +245,41 @@ static void __init cns3xxx_timer_init(void)
struct sys_timer cns3xxx_timer = {
.init = cns3xxx_timer_init,
};
+
+void __init cns3xxx_l2x0_init(void)
+{
+ void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
+ u32 val;
+
+ if (WARN_ON(!base))
+ return;
+
+ /*
+ * Tag RAM Control register
+ *
+ * bit[10:8] - 1 cycle of write accesses latency
+ * bit[6:4] - 1 cycle of read accesses latency
+ * bit[3:0] - 1 cycle of setup latency
+ *
+ * 1 cycle of latency for setup, read and write accesses
+ */
+ val = readl(base + L2X0_TAG_LATENCY_CTRL);
+ val &= 0xfffff888;
+ writel(val, base + L2X0_TAG_LATENCY_CTRL);
+
+ /*
+ * Data RAM Control register
+ *
+ * bit[10:8] - 1 cycles of write accesses latency
+ * bit[6:4] - 1 cycles of read accesses latency
+ * bit[3:0] - 1 cycle of setup latency
+ *
+ * 1 cycle of setup latency, 2 cycles of read and write accesses latency
+ */
+ val = readl(base + L2X0_DATA_LATENCY_CTRL);
+ val &= 0xfffff888;
+ writel(val, base + L2X0_DATA_LATENCY_CTRL);
+
+ /* 32 KiB, 8-way, parity disable */
+ l2x0_init(base, 0x00540000, 0xfe000fff);
+}
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index ffeb3a8..13635ca 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -14,6 +14,7 @@
extern struct sys_timer cns3xxx_timer;
void __init cns3xxx_map_io(void);
+void __init cns3xxx_l2x0_init(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 0074b8d..cb26d49 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -821,7 +821,7 @@ config CACHE_L2X0
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || ARCH_CNS3XXX
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
--
1.7.5.3
More information about the linux-arm-kernel
mailing list