[PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28

[Huang Shijie]

于 2011年07月01日 16:39, Huang Shijie 写道:
> Hi:
>> On Fri, Jul 01, 2011 at 03:53:13PM +0800, Huang Shijie wrote:
>>> Hi:
>>>> Hi Arnd,
>>>>
>>>>> If you really want to call out obsceneties, how about the fact 
>>>>> that this
>>>>> driver comes with an 805 line patch to add a HAL for a single chip!
>>>>>
>>>>> Such abstractions should not be introduced as long as there is only
>>>>> a single instance of the hardware.
>>>> If I understood correctly, most if not all upcoming i.MX will have 
>>>> the GPMI
>>>> (mx50, mx6). Huang, do you already have a draft for the mx50-hal?
>>>>
>>> I have finished the code for mx50's GPMI.
>>> And I am coding for the MX6's GPMI recently.
>>>
>>> I need a separate mx50-hal (or mx60-hal) to make the code tidy.
>>> The MX50 and mx60 support ONFI NAND and TOGGLE nand(which mx23/mx28
>>> do not support),
>>> they need a long code to initialize the TIMING register. What's
>>> more, the READ/WRITE functions
>>> are different from the mx23/mx28.
>>>
>>> Frankly speaking, I can merge the mxs-hal.c file to the gpmi-nfc.c,
>>> but don't you think it too
>>> messy?
>> Is it possible to post the mx50 code (as RFC with a note saying that it
>> is not ready yet and is not intended to be merged) so we can see better?
>>
> The attachment is for mx50 GPMI driver.
> You can see the long timing initialization.
The normal mx50 board does not supports DDR mode, so i do not enable it 
in the patch.


But another special MX50 board(ddr2 board) supports DDR mode, the code 
is for that board.

Best Regards
Huang Shijie
>
> I will take a business trip in the following several days.
> I will submit new version when i come back to office.
>