[PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API
Boojin Kim
boojin.kim at samsung.com
Sun Jul 24 21:28:30 EDT 2011
This patch adds to support DMA generic API to transfer raw
SPI data. Basiclly the spi driver uses DMA generic API if
architecture supports it. Otherwise, uses Samsung specific
S3C-PL330 APIs.
Signed-off-by: Boojin Kim <boojin.kim at samsung.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
drivers/spi/spi_s3c64xx.c | 141 ++++++++++++++++++++++-----------------------
1 files changed, 69 insertions(+), 72 deletions(-)
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 8945e20..a4cf76a 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -172,6 +172,9 @@ struct s3c64xx_spi_driver_data {
unsigned state;
unsigned cur_mode, cur_bpw;
unsigned cur_speed;
+ unsigned rx_ch;
+ unsigned tx_ch;
+ struct samsung_dma_ops *ops;
};
static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@@ -227,6 +230,38 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
writel(val, regs + S3C64XX_SPI_CH_CFG);
}
+static void s3c64xx_spi_dma_rxcb(void *data)
+{
+ struct s3c64xx_spi_driver_data *sdd
+ = (struct s3c64xx_spi_driver_data *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sdd->lock, flags);
+
+ sdd->state &= ~RXBUSY;
+ /* If the other done */
+ if (!(sdd->state & TXBUSY))
+ complete(&sdd->xfer_completion);
+
+ spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
+static void s3c64xx_spi_dma_txcb(void *data)
+{
+ struct s3c64xx_spi_driver_data *sdd
+ = (struct s3c64xx_spi_driver_data *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sdd->lock, flags);
+
+ sdd->state &= ~TXBUSY;
+ /* If the other done */
+ if (!(sdd->state & RXBUSY))
+ complete(&sdd->xfer_completion);
+
+ spin_unlock_irqrestore(&sdd->lock, flags);
+}
+
static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi,
struct spi_transfer *xfer, int dma_mode)
@@ -234,6 +269,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
+ struct samsung_dma_prep_info info;
modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
@@ -259,10 +295,14 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
chcfg |= S3C64XX_SPI_CH_TXCH_ON;
if (dma_mode) {
modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
- s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
- s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
- xfer->tx_dma, xfer->len);
- s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
+ info.cap = DMA_SLAVE;
+ info.direction = DMA_TO_DEVICE;
+ info.buf = xfer->tx_dma;
+ info.len = xfer->len;
+ info.fp = s3c64xx_spi_dma_txcb;
+ info.fp_param = sdd;
+ sdd->ops->prepare(sdd->tx_ch, &info);
+ sdd->ops->trigger(sdd->tx_ch);
} else {
switch (sdd->cur_bpw) {
case 32:
@@ -294,10 +334,14 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
| S3C64XX_SPI_PACKET_CNT_EN,
regs + S3C64XX_SPI_PACKET_CNT);
- s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
- s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
- xfer->rx_dma, xfer->len);
- s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
+ info.cap = DMA_SLAVE;
+ info.direction = DMA_FROM_DEVICE;
+ info.buf = xfer->rx_dma;
+ info.len = xfer->len;
+ info.fp = s3c64xx_spi_dma_rxcb;
+ info.fp_param = sdd;
+ sdd->ops->prepare(sdd->rx_ch, &info);
+ sdd->ops->trigger(sdd->rx_ch);
}
}
@@ -483,46 +527,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
}
}
-static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
- int size, enum s3c2410_dma_buffresult res)
-{
- struct s3c64xx_spi_driver_data *sdd = buf_id;
- unsigned long flags;
-
- spin_lock_irqsave(&sdd->lock, flags);
-
- if (res == S3C2410_RES_OK)
- sdd->state &= ~RXBUSY;
- else
- dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
-
- /* If the other done */
- if (!(sdd->state & TXBUSY))
- complete(&sdd->xfer_completion);
-
- spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
-static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
- int size, enum s3c2410_dma_buffresult res)
-{
- struct s3c64xx_spi_driver_data *sdd = buf_id;
- unsigned long flags;
-
- spin_lock_irqsave(&sdd->lock, flags);
-
- if (res == S3C2410_RES_OK)
- sdd->state &= ~TXBUSY;
- else
- dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
-
- /* If the other done */
- if (!(sdd->state & RXBUSY))
- complete(&sdd->xfer_completion);
-
- spin_unlock_irqrestore(&sdd->lock, flags);
-}
-
#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
@@ -697,12 +701,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
if (use_dma) {
if (xfer->tx_buf != NULL
&& (sdd->state & TXBUSY))
- s3c2410_dma_ctrl(sdd->tx_dmach,
- S3C2410_DMAOP_FLUSH);
+ sdd->ops->stop(sdd->tx_ch);
if (xfer->rx_buf != NULL
&& (sdd->state & RXBUSY))
- s3c2410_dma_ctrl(sdd->rx_dmach,
- S3C2410_DMAOP_FLUSH);
+ sdd->ops->stop(sdd->rx_ch);
}
goto out;
@@ -742,24 +744,19 @@ out:
static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
{
- if (s3c2410_dma_request(sdd->rx_dmach,
- &s3c64xx_spi_dma_client, NULL) < 0) {
- dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
- return 0;
- }
- s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
- s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
- sdd->sfr_start + S3C64XX_SPI_RX_DATA);
-
- if (s3c2410_dma_request(sdd->tx_dmach,
- &s3c64xx_spi_dma_client, NULL) < 0) {
- dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
- s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
- return 0;
- }
- s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
- s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
- sdd->sfr_start + S3C64XX_SPI_TX_DATA);
+
+ struct samsung_dma_info info;
+ sdd->ops = samsung_dma_get_ops();
+
+ info.cap = DMA_SLAVE;
+ info.client = &s3c64xx_spi_dma_client;
+ info.direction = DMA_FROM_DEVICE;
+ info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+ info.width = sdd->cur_bpw / 8;
+ sdd->rx_ch = sdd->ops->request(sdd->rx_dmach, &info);
+ info.direction = DMA_TO_DEVICE;
+ info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+ sdd->tx_ch = sdd->ops->request(sdd->tx_dmach, &info);
return 1;
}
@@ -800,8 +797,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
spin_unlock_irqrestore(&sdd->lock, flags);
/* Free DMA channels */
- s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
- s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
+ sdd->ops->release(sdd->rx_ch, &s3c64xx_spi_dma_client);
+ sdd->ops->release(sdd->tx_ch, &s3c64xx_spi_dma_client);
}
static int s3c64xx_spi_transfer(struct spi_device *spi,
--
1.7.1
More information about the linux-arm-kernel
mailing list