[PATCH v2] ARM:OMAP4 add Phytec phyCORE-OMAP4 board
Jan Weitzel
J.Weitzel at phytec.de
Wed Jul 13 06:58:58 EDT 2011
Am Mittwoch, den 13.07.2011, 01:03 -0700 schrieb Tony Lindgren:
> * Jan Weitzel <j.weitzel at phytec.de> [110708 05:16]:
> > This adds support for the Phytec OMAP4430 board called phyCORE-OMAP4 PCM049.
>
> I've updated this for the TWL cleanup, that left out about 150 LOC.
> Will apply to board-part-2 branch.
>
> Jan, can you please check?
works fine for me. I see vusim is not used in our board. I will send a
patch to remove it also.
Jan
> Regards,
>
> Tony
>
>
> From: Jan Weitzel <j.weitzel at phytec.de>
> Date: Wed, 13 Jul 2011 00:58:26 -0700
> Subject: [PATCH] ARM:OMAP4 add Phytec phyCORE-OMAP4 board
>
> This adds support for the Phytec OMAP4430 board called phyCORE-OMAP4 PCM049.
>
> Signed-off-by: Jan Weitzel <j.weitzel at phytec.de>
> [tony at atomide.com: updated for timer and twl cleanup, and to select the board by default]
> Signed-off-by: Tony Lindgren <tony at atomide.com>
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 6b88799..d5e4b60 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -333,6 +333,12 @@ config MACH_OMAP4_PANDA
> select OMAP_PACKAGE_CBS
> select REGULATOR_FIXED_VOLTAGE
>
> +config MACH_PCM049
> + bool "OMAP4 based phyCORE OMAP4"
> + depends on ARCH_OMAP4
> + default y
> + select OMAP_PACKAGE_CBS
> +
> config OMAP3_EMU
> bool "OMAP3 debugging peripherals"
> depends on ARCH_OMAP3
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 2d4d18e..7494b04 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -240,6 +240,10 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
> hsmmc.o \
> omap_phy_internal.o
>
> +obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \
> + hsmmc.o \
> + omap_phy_internal.o
> +
> obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \
> omap_phy_internal.o \
>
> diff --git a/arch/arm/mach-omap2/board-omap4pcm049.c b/arch/arm/mach-omap2/board-omap4pcm049.c
> new file mode 100644
> index 0000000..ad8cb46
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-omap4pcm049.c
> @@ -0,0 +1,602 @@
> +/*
> + * Board support file for Phytec phyCORE-OMAP4 Board.
> + *
> + * Copyright (C) 2011 Phytec Messtechnik GmbH
> + *
> + * Author: Jan Weitzel <armlinux at phytec.de>
> + *
> + * Based on mach-omap2/board-omap4panda.c
> + *
> + * Author: David Anders <x0132446 at ti.com>
> + *
> + * Author: Santosh Shilimkar <santosh.shilimkar at ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/leds.h>
> +#include <linux/gpio.h>
> +#include <linux/usb/otg.h>
> +#include <linux/i2c/twl.h>
> +#include <linux/i2c/at24.h>
> +#include <linux/mfd/stmpe.h>
> +#include <linux/leds-pca9532.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/fixed.h>
> +#include <linux/smsc911x.h>
> +
> +#include <mach/hardware.h>
> +#include <mach/omap4-common.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <video/omapdss.h>
> +
> +#include <plat/board.h>
> +#include <plat/common.h>
> +#include <plat/usb.h>
> +#include <plat/gpmc.h>
> +#include <plat/gpmc-smsc911x.h>
> +#include <plat/mmc.h>
> +#include <video/omap-panel-generic-dpi.h>
> +
> +#include "hsmmc.h"
> +#include "control.h"
> +#include "mux.h"
> +#include "common-board-devices.h"
> +
> +#define OMAP4_PCM049_ETH_GPIO_IRQ 121
> +#define OMAP4_PCM049_ETH_CS 5
> +#define OMAP4_PCM049_STMPE811_GPIO_IRQ 117
> +#define OMAP4_PCM049_LCD_ENABLE 118
> +
> +static struct gpio_led gpio_leds[] = {
> + {
> + .name = "modul:red:status1",
> + .default_trigger = "heartbeat",
> + .gpio = 152,
> + },
> + {
> + .name = "modul:green:status2",
> + .default_trigger = "mmc0",
> + .gpio = 153,
> + },
> +};
> +
> +static struct gpio_led_platform_data gpio_led_info = {
> + .leds = gpio_leds,
> + .num_leds = ARRAY_SIZE(gpio_leds),
> +};
> +
> +static struct platform_device leds_gpio = {
> + .name = "leds-gpio",
> + .id = -1,
> + .dev = {
> + .platform_data = &gpio_led_info,
> + },
> +};
> +
> +static void __init pcm049_init_early(void)
> +{
> + omap2_init_common_infrastructure();
> + omap2_init_common_devices(NULL, NULL);
> +}
> +
> +static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
> + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
> + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
> + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
> + .phy_reset = false,
> + .reset_gpio_port[0] = -EINVAL,
> + .reset_gpio_port[1] = -EINVAL,
> + .reset_gpio_port[2] = -EINVAL
> +};
> +
> +static void __init omap4_ehci_init(void)
> +{
> + struct clk *phy_ref_clk;
> + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
> + phy_ref_clk = clk_get(NULL, "auxclk3_ck");
> + if (IS_ERR(phy_ref_clk)) {
> + pr_err("Cannot request auxclk3\n");
> + return;
> + }
> + clk_set_rate(phy_ref_clk, 19200000);
> + clk_enable(phy_ref_clk);
> +
> + usbhs_init(&usbhs_bdata);
> + return;
> +}
> +
> +static struct omap_musb_board_data musb_board_data = {
> + .interface_type = MUSB_INTERFACE_UTMI,
> + .mode = MUSB_OTG,
> + .power = 100,
> +};
> +
> +static struct omap2_hsmmc_info mmc[] = {
> + {
> + .mmc = 1,
> + .caps = MMC_CAP_4_BIT_DATA,
> + .gpio_wp = -EINVAL,
> + .gpio_cd = -EINVAL,
> + }, {
> + .mmc = 5,
> + .caps = MMC_CAP_4_BIT_DATA,
> + .gpio_wp = -EINVAL,
> + .gpio_cd = 30, /* wk30 */
> + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3V3 */
> + }, {} /* Terminator */
> +};
> +
> +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
> +static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
> + .cs = OMAP4_PCM049_ETH_CS,
> + .gpio_irq = OMAP4_PCM049_ETH_GPIO_IRQ,
> + .gpio_reset = -EINVAL,
> + .flags = SMSC911X_USE_16BIT,
> +};
> +
> +static inline void __init pcm049_init_smsc911x(void)
> +{
> + omap_mux_init_gpio(OMAP4_PCM049_ETH_GPIO_IRQ, OMAP_PIN_INPUT);
> + gpmc_smsc911x_init(&board_smsc911x_data);
> +}
> +#else
> +static inline void __init pcm049_init_smsc911x(void) { return; }
> +#endif
> +
> +static int omap4_twl6030_hsmmc_late_init(struct device *dev)
> +{
> + int ret = 0;
> + struct platform_device *pdev = container_of(dev,
> + struct platform_device, dev);
> + struct omap_mmc_platform_data *pdata = dev->platform_data;
> +
> + /* Setting MMC1 Card detect Irq */
> + if (pdev->id == 0) {
> + ret = twl6030_mmc_card_detect_config();
> + if (ret)
> + dev_err(dev, "%s: Error card detect config(%d)\n",
> + __func__, ret);
> + pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
> + MMCDETECT_INTR_OFFSET;
> + pdata->slots[0].card_detect = twl6030_mmc_card_detect;
> + }
> + return ret;
> +}
> +
> +static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
> +{
> + struct omap_mmc_platform_data *pdata;
> +
> + /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
> + if (!dev) {
> + pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
> + return;
> + }
> + pdata = dev->platform_data;
> +
> + pdata->init = omap4_twl6030_hsmmc_late_init;
> +}
> +
> +static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
> +{
> + struct omap2_hsmmc_info *c;
> +
> + omap2_hsmmc_init(controllers);
> + for (c = controllers; c->mmc; c++)
> + omap4_twl6030_hsmmc_set_late_init(c->dev);
> +
> + return 0;
> +}
> +
> +/* Fixed regulator for max1027 */
> +static struct regulator_consumer_supply pcm049_vcc_3v3_consumer_supply[] = {
> + REGULATOR_SUPPLY("vcc", "4-0064"),
> +};
> +
> +struct regulator_init_data pcm049_vcc_3v3_initdata = {
> + .consumer_supplies = pcm049_vcc_3v3_consumer_supply,
> + .num_consumer_supplies = ARRAY_SIZE(pcm049_vcc_3v3_consumer_supply),
> + .constraints = {
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct fixed_voltage_config pcm049_vcc_3v3_config = {
> + .supply_name = "pcm049_vcc_3v3",
> + .microvolts = 3300000,
> + .gpio = -EINVAL,
> + .enabled_at_boot = 1,
> + .init_data = &pcm049_vcc_3v3_initdata,
> +};
> +
> +static struct platform_device pcm049_vcc_3v3_device = {
> + .name = "reg-fixed-voltage",
> + .id = 0,
> + .dev = {
> + .platform_data = &pcm049_vcc_3v3_config,
> + },
> +};
> +
> +static struct regulator_init_data pcm049_vusim = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 3300000,
> + .apply_uV = true,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static struct at24_platform_data board_eeprom = {
> + .byte_len = 4096,
> + .page_size = 32,
> + .flags = AT24_FLAG_ADDR16,
> +};
> +
> +static struct stmpe_gpio_platform_data pba_gpio_stm_data = {
> + .gpio_base = -1,
> + .norequest_mask = STMPE_GPIO_NOREQ_811_TOUCH,
> +};
> +
> +static struct stmpe_ts_platform_data pba_ts_stm_pdata = {
> + .sample_time = 4,
> + .mod_12b = 1,
> + .ref_sel = 0,
> + .adc_freq = 1,
> + .ave_ctrl = 3,
> + .touch_det_delay = 3,
> + .settling = 3,
> + .fraction_z = 7,
> + .i_drive = 0,
> +};
> +
> +static struct stmpe_platform_data pba_stm_pdata = {
> + .blocks = STMPE_BLOCK_GPIO | STMPE_BLOCK_TOUCHSCREEN,
> + .irq_base = TWL6030_IRQ_END,
> + .irq_trigger = IRQF_TRIGGER_RISING,
> + .irq_invert_polarity = true,
> + .gpio = &pba_gpio_stm_data,
> + .ts = &pba_ts_stm_pdata,
> +};
> +
> +static struct pca9532_platform_data pba_pca9532 = {
> + .leds = {
> + {
> + .name = "board:red:free_use1",
> + .state = PCA9532_OFF,
> + .type = PCA9532_TYPE_LED,
> + }, {
> + .name = "board:yellow:free_use2",
> + .state = PCA9532_OFF,
> + .type = PCA9532_TYPE_LED,
> + }, {
> + .name = "board:yellow:free_use3",
> + .state = PCA9532_OFF,
> + .type = PCA9532_TYPE_LED,
> + }, {
> + .name = "board:green:free_use4",
> + .state = PCA9532_OFF,
> + .type = PCA9532_TYPE_LED,
> + },
> + },
> + .psc = { 1, 1 },
> + .pwm = { 1, 1 },
> +};
> +
> +static struct i2c_board_info __initdata pcm049_i2c_1_boardinfo[] = {
> + {
> + I2C_BOARD_INFO("at24", 0x57), /* E0=1, E1=1, E2=1 */
> + .platform_data = &board_eeprom,
> + },
> +};
> +
> +static struct i2c_board_info __initdata pcm049_i2c_3_boardinfo[] = {
> +};
> +
> +static struct i2c_board_info __initdata pcm049_i2c_4_boardinfo[] = {
> + {
> + I2C_BOARD_INFO("stmpe811", 0x41), /* Touch controller */
> + .irq = OMAP_GPIO_IRQ(OMAP4_PCM049_STMPE811_GPIO_IRQ),
> + .platform_data = &pba_stm_pdata,
> + }, {
> + I2C_BOARD_INFO("max1037", 0x64), /* A/D converter */
> + }, {
> + I2C_BOARD_INFO("pca9533", 0x62), /* Leds pca9533 */
> + .platform_data = &pba_pca9532,
> + }
> +};
> +
> +static struct twl4030_platform_data pcm049_twldata = {
> + .vusim = &pcm049_vusim,
> +};
> +
> +static int __init pcm049_i2c_init(void)
> +{
> + /* I2C1 */
> + omap4_pmic_get_config(&pcm049_twldata, TWL_COMMON_PDATA_USB,
> + TWL_COMMON_REGULATOR_VDAC |
> + TWL_COMMON_REGULATOR_VAUX2 |
> + TWL_COMMON_REGULATOR_VAUX3 |
> + TWL_COMMON_REGULATOR_VMMC |
> + TWL_COMMON_REGULATOR_VPP |
> + TWL_COMMON_REGULATOR_VANA |
> + TWL_COMMON_REGULATOR_VCXIO |
> + TWL_COMMON_REGULATOR_VUSB |
> + TWL_COMMON_REGULATOR_CLK32KG);
> + omap4_pmic_init("twl6030", &pcm049_twldata);
> + i2c_register_board_info(1, pcm049_i2c_1_boardinfo,
> + ARRAY_SIZE(pcm049_i2c_1_boardinfo));
> +
> + /* I2C3 */
> + omap_register_i2c_bus(3, 400, pcm049_i2c_3_boardinfo,
> + ARRAY_SIZE(pcm049_i2c_3_boardinfo));
> +
> + /* I2C4 */
> + if (omap_mux_init_gpio(OMAP4_PCM049_STMPE811_GPIO_IRQ, OMAP_PIN_INPUT))
> + printk(KERN_ERR "Failed to mux GPIO%d for STMPE811 IRQ\n",
> + OMAP4_PCM049_STMPE811_GPIO_IRQ);
> + else if (gpio_request(OMAP4_PCM049_STMPE811_GPIO_IRQ, "STMPE811 irq"))
> + printk(KERN_ERR "Failed to request GPIO%d for STMPE811 IRQ\n",
> + OMAP4_PCM049_STMPE811_GPIO_IRQ);
> + else
> + gpio_direction_input(OMAP4_PCM049_STMPE811_GPIO_IRQ);
> +
> + omap_register_i2c_bus(4, 400, pcm049_i2c_4_boardinfo,
> + ARRAY_SIZE(pcm049_i2c_4_boardinfo));
> + return 0;
> +}
> +
> +#ifdef CONFIG_OMAP_MUX
> +static struct omap_board_mux board_mux[] __initdata = {
> + OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
> + OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
> + OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
> + OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
> +
> + /* dispc2_data23 */
> + OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data22 */
> + OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data21 */
> + OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data20 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data19 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data18 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data15 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data14 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data13 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data12 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data11 */
> + OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data10 */
> + OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data9 */
> + OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data16 */
> + OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data17 */
> + OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_hsync */
> + OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_pclk */
> + OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_vsync */
> + OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_de */
> + OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data8 */
> + OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data7 */
> + OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data6 */
> + OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data5 */
> + OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data4 */
> + OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data3 */
> + OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data2 */
> + OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data1 */
> + OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> + /* dispc2_data0 */
> + OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
> +
> + { .reg_offset = OMAP_MUX_TERMINATOR },
> +};
> +
> +static struct omap_device_pad serial2_pads[] __initdata = {
> + OMAP_MUX_STATIC("uart2_cts.uart2_cts",
> + OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
> + OMAP_MUX_STATIC("uart2_rts.uart2_rts",
> + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
> + OMAP_MUX_STATIC("uart2_rx.uart2_rx",
> + OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
> + OMAP_MUX_STATIC("uart2_tx.uart2_tx",
> + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
> +};
> +
> +static struct omap_device_pad serial3_pads[] __initdata = {
> + OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
> + OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
> + OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
> + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
> + OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
> + OMAP_PIN_INPUT | OMAP_MUX_MODE0),
> + OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
> + OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
> +};
> +
> +static struct omap_board_data serial2_data __initdata = {
> + .id = 1,
> + .pads = serial2_pads,
> + .pads_cnt = ARRAY_SIZE(serial2_pads),
> +};
> +
> +static struct omap_board_data serial3_data __initdata = {
> + .id = 2,
> + .pads = serial3_pads,
> + .pads_cnt = ARRAY_SIZE(serial3_pads),
> +};
> +
> +static inline void board_serial_init(void)
> +{
> + omap_serial_init_port(&serial2_data);
> + omap_serial_init_port(&serial3_data);
> +}
> +#else
> +#define board_mux NULL
> +
> +static inline void board_serial_init(void)
> +{
> + omap_serial_init();
> +}
> +#endif
> +
> +/* Display */
> +static int pcm049_panel_enable_lcd(struct omap_dss_device *dssdev)
> +{
> + return gpio_direction_output(OMAP4_PCM049_LCD_ENABLE, 1);
> +}
> +
> +static void pcm049_panel_disable_lcd(struct omap_dss_device *dssdev)
> +{
> + gpio_direction_output(OMAP4_PCM049_LCD_ENABLE, 0);
> + return;
> +}
> +
> +/* Using generic display panel */
> +static struct panel_generic_dpi_data omap4_dpi_panel = {
> + .name = "pd050vl1",
> + .platform_enable = pcm049_panel_enable_lcd,
> + .platform_disable = pcm049_panel_disable_lcd,
> +};
> +
> +struct omap_dss_device pcm049_dpi_device = {
> + .type = OMAP_DISPLAY_TYPE_DPI,
> + .name = "dpi",
> + .driver_name = "generic_dpi_panel",
> + .data = &omap4_dpi_panel,
> + .phy.dpi.data_lines = 24,
> + .channel = OMAP_DSS_CHANNEL_LCD2,
> +};
> +
> +static void pcm049_dvi_mux_init(void)
> +{
> + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
> + omap_mux_init_signal("hdmi_hpd",
> + OMAP_PIN_INPUT_PULLUP);
> + omap_mux_init_signal("hdmi_cec",
> + OMAP_PIN_INPUT_PULLUP);
> + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
> + omap_mux_init_signal("hdmi_ddc_scl",
> + OMAP_PIN_INPUT_PULLUP);
> + omap_mux_init_signal("hdmi_ddc_sda",
> + OMAP_PIN_INPUT_PULLUP);
> +}
> +
> +static struct omap_dss_device pcm049_dvi_device = {
> + .name = "dvi",
> + .driver_name = "hdmi_panel",
> + .type = OMAP_DISPLAY_TYPE_HDMI,
> + .clocks = {
> + .dispc = {
> + .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
> + },
> + .hdmi = {
> + .regn = 15,
> + .regm2 = 1,
> + },
> + },
> + .channel = OMAP_DSS_CHANNEL_DIGIT,
> +};
> +
> +static struct omap_dss_device *pcm049_dss_devices[] = {
> + &pcm049_dpi_device,
> + &pcm049_dvi_device,
> +};
> +
> +static struct omap_dss_board_info pcm049_dss_data = {
> + .num_devices = ARRAY_SIZE(pcm049_dss_devices),
> + .devices = pcm049_dss_devices,
> + .default_device = &pcm049_dpi_device,
> +};
> +
> +void pcm049_display_init(void)
> +{
> + omap_mux_init_gpio(OMAP4_PCM049_LCD_ENABLE, OMAP_PIN_OUTPUT);
> +
> + if ((gpio_request(OMAP4_PCM049_LCD_ENABLE, "DISP_ENA") == 0) &&
> + (gpio_direction_output(OMAP4_PCM049_LCD_ENABLE, 1) == 0)) {
> + gpio_export(OMAP4_PCM049_LCD_ENABLE, 0);
> + gpio_set_value(OMAP4_PCM049_LCD_ENABLE, 0);
> + } else
> + printk(KERN_ERR "could not obtain gpio for DISP_ENA");
> + pcm049_dvi_mux_init();
> + omap_display_init(&pcm049_dss_data);
> +}
> +
> +static struct platform_device *pcm049_devices[] __initdata = {
> + &pcm049_vcc_3v3_device,
> + &leds_gpio,
> +};
> +
> +#define TWL_PHOENIX_DEV_ON 0x25
> +
> +static void pcm049_power_off(void)
> +{
> + printk(KERN_INFO "Goodbye phyCORE OMAP4!\n");
> + twl_i2c_write_u8(TWL6030_MODULE_ID0, 0x7, TWL_PHOENIX_DEV_ON);
> +}
> +
> +
> +static void __init pcm049_init(void)
> +{
> + pm_power_off = pcm049_power_off;
> + omap4_mux_init(board_mux, NULL, OMAP_PACKAGE_CBS);
> + pcm049_init_smsc911x();
> + pcm049_i2c_init();
> + platform_add_devices(pcm049_devices, ARRAY_SIZE(pcm049_devices));
> + board_serial_init();
> + omap4_twl6030_hsmmc_init(mmc);
> + omap4_ehci_init();
> + usb_musb_init(&musb_board_data);
> + pcm049_display_init();
> +}
> +
> +static void __init pcm049_map_io(void)
> +{
> + omap2_set_globals_443x();
> + omap44xx_map_common_io();
> +}
> +
> +MACHINE_START(PCM049, "phyCORE OMAP4")
> + /* Maintainer: Jan Weitzel - Phytec Messtechnik GmbH */
> + .boot_params = 0x80000100,
> + .reserve = omap_reserve,
> + .map_io = pcm049_map_io,
> + .init_early = pcm049_init_early,
> + .init_irq = gic_init_irq,
> + .init_machine = pcm049_init,
> + .timer = &omap4_timer,
> +MACHINE_END
> diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
> index 2b71b17..cb4a6c2 100644
> --- a/arch/arm/plat-omap/include/plat/uncompress.h
> +++ b/arch/arm/plat-omap/include/plat/uncompress.h
> @@ -166,6 +166,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
> /* omap4 based boards using UART3 */
> DEBUG_LL_OMAP4(3, omap_4430sdp);
> DEBUG_LL_OMAP4(3, omap4_panda);
> + DEBUG_LL_OMAP4(3, pcm049);
>
> /* zoom2/3 external uart */
> DEBUG_LL_ZOOM(omap_zoom2);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list