[PATCH v4 07/20] gpio/omap: avoid cpu checks during module ena/disable
Tarun Kanti DebBarma
tarun.kanti at ti.com
Wed Jul 13 09:54:06 EDT 2011
From: Charulatha V <charu at ti.com>
Remove cpu-is checks while enabling/disabling OMAP GPIO module during a gpio
request/free.
Signed-off-by: Charulatha V <charu at ti.com>
---
arch/arm/mach-omap2/gpio.c | 2 +
arch/arm/plat-omap/include/plat/gpio.h | 1 +
drivers/gpio/gpio-omap.c | 53 ++++++++++++++------------------
3 files changed, 26 insertions(+), 30 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 4952a9d..cdbc728 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -107,6 +107,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
+ pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
break;
case 2:
pdata->bank_type = METHOD_GPIO_44XX;
@@ -123,6 +124,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
+ pdata->regs->ctrl = OMAP4_GPIO_CTRL;
break;
default:
WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index ce417cd..cf41743 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -188,6 +188,7 @@ struct omap_gpio_reg_offs {
u16 clr_irqenable;
u16 debounce;
u16 debounce_en;
+ u16 ctrl;
bool irqenable_inv;
};
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 057f8c0..5862368 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -83,6 +83,7 @@ struct gpio_bank {
#define GPIO_INDEX(bank, gpio) (gpio % bank->width)
#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
+#define GPIO_MOD_CTRL_BIT BIT(0)
static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
{
@@ -576,22 +577,18 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
__raw_writel(__raw_readl(reg) | (1 << offset), reg);
}
#endif
- if (!cpu_class_is_omap1()) {
- if (!bank->mod_usage) {
- void __iomem *reg = bank->base;
- u32 ctrl;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg += OMAP24XX_GPIO_CTRL;
- else if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_CTRL;
- ctrl = __raw_readl(reg);
- /* Module is enabled, clocks are not gated */
- ctrl &= 0xFFFFFFFE;
- __raw_writel(ctrl, reg);
- }
- bank->mod_usage |= 1 << offset;
+ if (bank->regs->ctrl && !bank->mod_usage) {
+ void __iomem *reg = bank->base + bank->regs->ctrl;
+ u32 ctrl;
+
+ ctrl = __raw_readl(reg);
+ /* Module is enabled, clocks are not gated */
+ ctrl &= ~GPIO_MOD_CTRL_BIT;
+ __raw_writel(ctrl, reg);
}
+
+ bank->mod_usage |= 1 << offset;
+
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@@ -624,22 +621,18 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
- if (!cpu_class_is_omap1()) {
- bank->mod_usage &= ~(1 << offset);
- if (!bank->mod_usage) {
- void __iomem *reg = bank->base;
- u32 ctrl;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg += OMAP24XX_GPIO_CTRL;
- else if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_CTRL;
- ctrl = __raw_readl(reg);
- /* Module is disabled, clocks are gated */
- ctrl |= 1;
- __raw_writel(ctrl, reg);
- }
+ bank->mod_usage &= ~(1 << offset);
+
+ if (bank->regs->ctrl && !bank->mod_usage) {
+ void __iomem *reg = bank->base + bank->regs->ctrl;
+ u32 ctrl;
+
+ ctrl = __raw_readl(reg);
+ /* Module is disabled, clocks are gated */
+ ctrl |= GPIO_MOD_CTRL_BIT;
+ __raw_writel(ctrl, reg);
}
+
_reset_gpio(bank, bank->chip.base + offset);
spin_unlock_irqrestore(&bank->lock, flags);
}
--
1.6.0.4
More information about the linux-arm-kernel
mailing list