[PATCH 1/3] ARM: vexpress: Add clock definition for the SP805.

[Nick Bowler]

It seems that an entry for the SP805 watchdog in the table of clocks was
missing.  This results in the sp805_wdt driver rejecting the device with
the following errors:

  sp805-wdt mb:wdt: Clock not found
  sp805-wdt mb:wdt: Probe Failed!!!
  sp805-wdt: probe of mb:wdt failed with error -2

While not obviously stated in the hardware docs, the onboard SP810's
"REFCLK" is connected to a 32.768KHz crystal, and this drives the
watchdog.  Add a struct clk and corresponding lookup entry for it.

Signed-off-by: Nick Bowler <nbowler at elliptictech.com>
---
 arch/arm/mach-vexpress/v2m.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 9e6b93b..d0d267a 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = {
 	.rate	= 1000000,
 };
 
+static struct clk v2m_ref_clk = {
+	.rate   = 32768,
+};
+
 static struct clk dummy_apb_pclk;
 
 static struct clk_lookup v2m_lookups[] = {
@@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = {
 	}, {	/* CLCD */
 		.dev_id		= "mb:clcd",
 		.clk		= &osc1_clk,
+	}, {	/* SP805 WDT */
+		.dev_id		= "mb:wdt",
+		.clk		= &v2m_ref_clk,
 	}, {	/* SP804 timers */
 		.dev_id		= "sp804",
 		.con_id		= "v2m-timer0",
-- 
1.7.3.4