[PATCH][RESEND] ARM: S5P64X0: External Interrupt Support
Kukjin Kim
kgene.kim at samsung.com
Thu Jul 21 04:06:45 EDT 2011
Padmavathi Venna wrote:
>
> Add external interrupt support for S5P64X0.The external interrupt
> group 0(0 to 15) is used for wake-up source in stop and sleep mode.
> Add generic irq chip support
>
> Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
> ---
>
> Please ignore my previous patch due to wrong return value.
>
> arch/arm/mach-s5p64x0/Makefile | 2 +-
> arch/arm/mach-s5p64x0/include/mach/regs-gpio.h | 10 ++
> arch/arm/mach-s5p64x0/irq-eint.c | 152
> ++++++++++++++++++++++++
> 3 files changed, 163 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/mach-s5p64x0/irq-eint.c
>
> diff --git a/arch/arm/mach-s5p64x0/Makefile
b/arch/arm/mach-s5p64x0/Makefile
> index ae6bf6f..5f6afdf 100644
> --- a/arch/arm/mach-s5p64x0/Makefile
> +++ b/arch/arm/mach-s5p64x0/Makefile
> @@ -13,7 +13,7 @@ obj- :=
> # Core support for S5P64X0 system
>
> obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o
> -obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o
> +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
> obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
> obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
>
> diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
b/arch/arm/mach-
> s5p64x0/include/mach/regs-gpio.h
> index 0953ef6..6ce2547 100644
> --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
> +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
> @@ -34,4 +34,14 @@
> #define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
> #define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
>
> +/* External interrupt control registers for group0 */
> +
> +#define EINT0CON0_OFFSET (0x900)
> +#define EINT0MASK_OFFSET (0x920)
> +#define EINT0PEND_OFFSET (0x924)
> +
> +#define S5P64X0_EINT0CON0 (S5P_VA_GPIO +
> EINT0CON0_OFFSET)
> +#define S5P64X0_EINT0MASK (S5P_VA_GPIO +
> EINT0MASK_OFFSET)
> +#define S5P64X0_EINT0PEND (S5P_VA_GPIO +
> EINT0PEND_OFFSET)
> +
> #endif /* __ASM_ARCH_REGS_GPIO_H */
> diff --git a/arch/arm/mach-s5p64x0/irq-eint.c
b/arch/arm/mach-s5p64x0/irq-eint.c
> new file mode 100644
> index 0000000..69ed454
> --- /dev/null
> +++ b/arch/arm/mach-s5p64x0/irq-eint.c
> @@ -0,0 +1,152 @@
> +/* arch/arm/mach-s5p64x0/irq-eint.c
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd
> + * http://www.samsung.com/
> + *
> + * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c
> + *
> + * S5P64X0 - Interrupt handling for External Interrupts.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/gpio.h>
> +#include <linux/irq.h>
> +#include <linux/io.h>
> +
> +#include <plat/regs-irqtype.h>
> +#include <plat/gpio-cfg.h>
> +
> +#include <mach/regs-gpio.h>
> +#include <mach/regs-clock.h>
> +
> +#define eint_offset(irq) ((irq) - IRQ_EINT(0))
> +
> +static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int
type)
> +{
> + int offs = eint_offset(data->irq);
> + int shift;
> + u32 ctrl, mask;
> + u32 newvalue = 0;
> +
> + if (offs > 15)
> + return -EINVAL;
> +
> + switch (type) {
> + case IRQ_TYPE_NONE:
> + printk(KERN_WARNING "No edge setting!\n");
> + break;
> + case IRQ_TYPE_EDGE_RISING:
> + newvalue = S3C2410_EXTINT_RISEEDGE;
> + break;
> + case IRQ_TYPE_EDGE_FALLING:
> + newvalue = S3C2410_EXTINT_FALLEDGE;
> + break;
> + case IRQ_TYPE_EDGE_BOTH:
> + newvalue = S3C2410_EXTINT_BOTHEDGE;
> + break;
> + case IRQ_TYPE_LEVEL_LOW:
> + newvalue = S3C2410_EXTINT_LOWLEV;
> + break;
> + case IRQ_TYPE_LEVEL_HIGH:
> + newvalue = S3C2410_EXTINT_HILEV;
> + break;
> + default:
> + printk(KERN_ERR "No such irq type %d", type);
> + return -EINVAL;
> + }
> +
> + shift = (offs / 2) * 4;
> + mask = 0x7 << shift;
> +
> + ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
> + ctrl |= newvalue << shift;
> + __raw_writel(ctrl, S5P64X0_EINT0CON0);
> +
> + /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
> + if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
> + s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
> + else
> + s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
> +
> + return 0;
> +}
> +
> +/*
> + * s5p64x0_irq_demux_eint
> + *
> + * This function demuxes the IRQ from the group0 external interrupts,
> + * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
> + * the specific handlers s5p64x0_irq_demux_eintX_Y.
> + */
> +static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned
int end)
> +{
> + u32 status = __raw_readl(S5P64X0_EINT0PEND);
> + u32 mask = __raw_readl(S5P64X0_EINT0MASK);
> + unsigned int irq;
> +
> + status &= ~mask;
> + status >>= start;
> + status &= (1 << (end - start + 1)) - 1;
> +
> + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
> + if (status & 1)
> + generic_handle_irq(irq);
> + status >>= 1;
> + }
> +}
> +
> +static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc
*desc)
> +{
> + s5p64x0_irq_demux_eint(0, 3);
> +}
> +
> +static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc
*desc)
> +{
> + s5p64x0_irq_demux_eint(4, 11);
> +}
> +
> +static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
> + struct irq_desc *desc)
> +{
> + s5p64x0_irq_demux_eint(12, 15);
> +}
> +
> +static int s5p64x0_alloc_gc(void)
> +{
> + struct irq_chip_generic *gc;
> + struct irq_chip_type *ct;
> +
> + gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
> + S5P_VA_GPIO, handle_level_irq);
> + if (!gc) {
> + printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
> + "external interrupts failed\n", __func__);
> + return -EINVAL;
> + }
> +
> + ct = gc->chip_types;
> + ct->chip.irq_ack = irq_gc_ack;
> + ct->chip.irq_mask = irq_gc_mask_set_bit;
> + ct->chip.irq_unmask = irq_gc_mask_clr_bit;
> + ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
> + ct->regs.ack = EINT0PEND_OFFSET;
> + ct->regs.mask = EINT0MASK_OFFSET;
> + irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
> + IRQ_NOREQUEST | IRQ_NOPROBE, 0);
> + return 0;
> +}
> +
> +static int __init s5p64x0_init_irq_eint(void)
> +{
> + int ret = s5p64x0_alloc_gc();
> + irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
> + irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
> + irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
> +
> + return ret;
> +}
> +arch_initcall(s5p64x0_init_irq_eint);
> --
> 1.7.0.4
Maybe this is my last guest :)
Ok, applied.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list