[PATCH v4 4/7] OMAP2+: PM: idle clkdms only if already in idle

[Benoit Cousson]

From: Rajendra Nayak <rnayak at ti.com>

The omap_set_pwrdm_state function forces clockdomains
to idle, without checking the existing idle state
programmed, instead based solely on the HW capability
of the clockdomain to support idle.
This is wrong and the clockdomains should be idled
post a state_switch *only* if idle transitions on the
clockdomain were already enabled.

Signed-off-by: Rajendra Nayak <rnayak at ti.com>
Cc: Paul Walmsley <paul at pwsan.com>
---
 arch/arm/mach-omap2/pm.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d48813f..ce1a9f3 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -108,6 +108,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 	u32 cur_state;
 	int sleep_switch = -1;
 	int ret = 0;
+	int hwsup = 0;
 
 	if (pwrdm == NULL || IS_ERR(pwrdm))
 		return -EINVAL;
@@ -127,6 +128,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 			(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
 			sleep_switch = LOWPOWERSTATE_SWITCH;
 		} else {
+			hwsup = clkdm_allows_idle(pwrdm->pwrdm_clkdms[0]);
 			clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
 			pwrdm_wait_transition(pwrdm);
 			sleep_switch = FORCEWAKEUP_SWITCH;
@@ -142,7 +144,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 
 	switch (sleep_switch) {
 	case FORCEWAKEUP_SWITCH:
-		if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO)
+		if (hwsup)
 			clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
 		else
 			clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
-- 
1.7.0.4