[PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()
Shawn Guo
shawn.guo at freescale.com
Mon Jul 4 04:43:25 EDT 2011
On Mon, Jul 04, 2011 at 09:33:20AM +0200, Uwe Kleine-König wrote:
> On Mon, Jul 04, 2011 at 10:19:25AM +0800, Shawn Guo wrote:
> > Hi Grant,
> >
> > Thanks for the review.
> >
> > On Sun, Jul 03, 2011 at 03:10:07PM -0600, Grant Likely wrote:
> > > On Sun, Jul 03, 2011 at 03:55:59PM +0800, Shawn Guo wrote:
> > > > The patch removes all the uses of cpu_is_mx1(). Instead, it uses
> > > > the .id_table of platform_driver to distinguish the uart device type.
> > > >
> > > > Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> > > > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > > > Cc: Alan Cox <alan at lxorguk.ukuu.org.uk>
> > > > ---
> > > > arch/arm/mach-imx/clock-imx1.c | 6 +-
> > > > arch/arm/plat-mxc/devices/platform-imx-uart.c | 2 +-
> > > > drivers/tty/serial/imx.c | 51 ++++++++++++++++++++++--
> > > > 3 files changed, 50 insertions(+), 9 deletions(-)
> > > >
> > > > diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
> > > > index dcc4172..4aabeb2 100644
> > > > --- a/arch/arm/mach-imx/clock-imx1.c
> > > > +++ b/arch/arm/mach-imx/clock-imx1.c
> > > > @@ -587,9 +587,9 @@ static struct clk_lookup lookups[] __initdata = {
> > > > _REGISTER_CLOCK(NULL, "mma", mma_clk)
> > > > _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
> > > > _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
> > > > - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
> > > > - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
> > > > - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
> > > > + _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk)
> > > > + _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk)
> > > > + _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk)
> > > > _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
> > > > _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
> > > > _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
> > > > diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
> > > > index cfce8c9..477271a 100644
> > > > --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
> > > > +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
> > > > @@ -152,7 +152,7 @@ struct platform_device *__init imx_add_imx_uart_3irq(
> > > > },
> > > > };
> > > >
> > > > - return imx_add_platform_device("imx-uart", data->id, res,
> > > > + return imx_add_platform_device("imx1-uart", data->id, res,
> > > > ARRAY_SIZE(res), pdata, sizeof(*pdata));
> > > > }
> > > >
> > > > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> > > > index 22fe801..983f3bd 100644
> > > > --- a/drivers/tty/serial/imx.c
> > > > +++ b/drivers/tty/serial/imx.c
> > > > @@ -48,7 +48,6 @@
> > > >
> > > > #include <asm/io.h>
> > > > #include <asm/irq.h>
> > > > -#include <mach/hardware.h>
> > > > #include <mach/imx-uart.h>
> > > >
> > > > /* Register definitions */
> > > > @@ -67,7 +66,8 @@
> > > > #define UBMR 0xa8 /* BRM Modulator Register */
> > > > #define UBRC 0xac /* Baud Rate Count Register */
> > > > #define MX2_ONEMS 0xb0 /* One Millisecond register */
> > > > -#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
> > > > +#define MX1_UTS 0xd0 /* UART Test Register on mx1 */
> > > > +#define MX2_UTS 0xb4 /* UART Test Register on mx2 and later */
> > > >
> > > > /* UART Control Register Bit Fields.*/
> > > > #define URXD_CHARRDY (1<<15)
> > > > @@ -181,6 +181,17 @@
> > > >
> > > > #define UART_NR 8
> > > >
> > > > +enum imx_uart_type {
> > > > + IMX1_UART,
> > > > + IMX2_UART,
> > > > +};
> > > > +
> > > > +/* device type dependent stuff */
> > > > +struct imx_uart_data {
> > > > + unsigned uts_reg;
> > > > + enum imx_uart_type devtype;
> > > > +};
> > > > +
> > > > struct imx_port {
> > > > struct uart_port port;
> > > > struct timer_list timer;
> > > > @@ -192,6 +203,7 @@ struct imx_port {
> > > > unsigned int irda_inv_tx:1;
> > > > unsigned short trcv_delay; /* transceiver delay */
> > > > struct clk *clk;
> > > > + struct imx_uart_data *devdata;
> > > > };
> > > >
> > > > #ifdef CONFIG_IRDA
> > > > @@ -200,6 +212,33 @@ struct imx_port {
> > > > #define USE_IRDA(sport) (0)
> > > > #endif
> > > >
> > > > +#define UTS (sport->devdata->uts_reg)
> > > > +#define IS_IMX1_UART() (sport->devdata->devtype == IMX1_UART)
> > > > +#define IS_IMX2_UART() (sport->devdata->devtype == IMX2_UART)
> > > > +
> > > > +static struct imx_uart_data imx_uart_devdata[] = {
> > > > + [IMX1_UART] = {
> > > > + .uts_reg = MX1_UTS,
> > > > + .devtype = IMX1_UART,
> > > > + },
> > > > + [IMX2_UART] = {
> > > > + .uts_reg = MX2_UTS,
> > > > + .devtype = IMX2_UART,
> > > > + },
> > > > +};
> > > > +
> > > > +static struct platform_device_id imx_uart_devtype[] = {
> > > > + {
> > > > + .name = "imx1-uart",
> > > > + .driver_data = IMX1_UART,
> > > > + }, {
> > > > + .name = "imx-uart",
> > > > + .driver_data = IMX2_UART,
> It feels strange to introduce IMX2 today meaning
> i.MX{21,25,27,31,35,50,51,53}. I didn't check the changes in detail, but
> if the only relevant change is that the UTS register is at a different
No, it's not the only relevant change. The patch also changes a couple of
'if (!cpu_is_imx1())' to 'if (IS_IMX2_UART())'.
The 'IMX2' in 'IMX2_UART' does not necessarily mean i.MX{21,25,27,
31,35,50,51,53}. It actually means i.MX{21,25,27,31,35,50,51,53} all
have the same UART block which was firstly introduced on IMX2.
It's actually a change respecting the existing code, which defines
MX2_ONEMS for all imx except imx1.
--
Regards,
Shawn
More information about the linux-arm-kernel
mailing list