[PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots

[Eric Miao]

On Tue, Jul 5, 2011 at 3:05 PM, zhangfei gao <zhangfei.gao at gmail.com> wrote:
> On Tue, Jul 5, 2011 at 2:52 PM, Eric Miao <eric.y.miao at gmail.com> wrote:
>> On Fri, Apr 29, 2011 at 4:45 AM, Philip Rakity <prakity at marvell.com> wrote:
>>>
>>> Support multiple sd/eMMC interfaces. enable mmc1, 2, and 3.
>>> mmc2 is used eMMC and slot is marked PERMANENT and 8 bit device.
>>> mmc1 is used for Wifi and slot is marked PERMANENT
>>>
>>> Note: eMMC (mmc2) is set to initialize first to workaround a problem
>>> where booting in logical order requires mmc create work queue
>>> to be multi-threaded otherwise boot process hangs.  BUG report
>>> send to linux-mmc and linux-kernel mailing list.
>>>
>>> Wifi (mmc1) requires we enable power on the device by toggling
>>> the gpio lines for power and reset.
>>>
>>> Signed-off-by: Philip Rakity <prakity at marvell.com>
>>
>> Applied. Though the email client was fiddling the spaces/CR-LF a bit.
>>
>>> ---
>>>  arch/arm/mach-mmp/brownstone.c |   52 +++++++++++++++++++++++++++++++++++++++-
>>>  1 files changed, 51 insertions(+), 1 deletions(-)
>>>
>
> Hi, Eric
>
> arch/arm/mach-mmp/brownstone.c has already been modified from
> mmc-next, here will have conflict.
> Sorry for inconvenience.

'K, I'll drop it then.

>
> Thanks
>