[PATCH] net/fec: gasket needs to be enabled for some i.mx
Shawn Guo
shawn.guo at linaro.org
Fri Jul 1 06:11:22 EDT 2011
On the recent i.mx (mx25/50/53), there is a gasket inside fec
controller which needs to be enabled no matter phy works in MII
or RMII mode.
The current code enables the gasket only when phy interface is RMII.
It's broken when the driver works with a MII phy. The patch uses
platform_device_id to distinguish the SoCs that have the gasket and
enables it on these SoCs for both MII and RMII mode.
Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Cc: David S. Miller <davem at davemloft.net>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/mach-imx/clock-imx25.c | 2 +-
arch/arm/mach-imx/clock-imx27.c | 2 +-
arch/arm/mach-imx/clock-imx35.c | 2 +-
arch/arm/mach-mx5/clock-mx51-mx53.c | 4 +-
arch/arm/plat-mxc/devices/platform-fec.c | 17 ++++++++-------
arch/arm/plat-mxc/include/mach/devices-common.h | 1 +
drivers/net/fec.c | 26 ++++++++++++++++++++--
7 files changed, 38 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index a65838f..5527fff 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -294,7 +294,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 583f251..d197df2 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -662,7 +662,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK(NULL, "emma", emma_clk)
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 5a4cc1e..fb4007b 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -461,7 +461,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imx35-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 699b0d2..04c5a01 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1426,7 +1426,7 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imx51-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
@@ -1475,7 +1475,7 @@ static struct clk_lookup mx53_lookups[] = {
_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imx53-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index ccc789e..3790c59 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -10,40 +10,41 @@
#include <mach/hardware.h>
#include <mach/devices-common.h>
-#define imx_fec_data_entry_single(soc) \
+#define imx_fec_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _FEC_BASE_ADDR, \
.irq = soc ## _INT_FEC, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fec_data imx25_fec_data __initconst =
- imx_fec_data_entry_single(MX25);
+ imx_fec_data_entry_single(MX25, "imx25-fec");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
- imx_fec_data_entry_single(MX27);
+ imx_fec_data_entry_single(MX27, "imx27-fec");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fec_data imx35_fec_data __initconst =
- imx_fec_data_entry_single(MX35);
+ imx_fec_data_entry_single(MX35, "imx35-fec");
#endif
#ifdef CONFIG_SOC_IMX50
const struct imx_fec_data imx50_fec_data __initconst =
- imx_fec_data_entry_single(MX50);
+ imx_fec_data_entry_single(MX50, "imx50-fec");
#endif
#ifdef CONFIG_SOC_IMX51
const struct imx_fec_data imx51_fec_data __initconst =
- imx_fec_data_entry_single(MX51);
+ imx_fec_data_entry_single(MX51, "imx51-fec");
#endif
#ifdef CONFIG_SOC_IMX53
const struct imx_fec_data imx53_fec_data __initconst =
- imx_fec_data_entry_single(MX53);
+ imx_fec_data_entry_single(MX53, "imx53-fec");
#endif
struct platform_device *__init imx_add_fec(
@@ -62,7 +63,7 @@ struct platform_device *__init imx_add_fec(
},
};
- return imx_add_platform_device_dmamask("fec", 0,
+ return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index bf93820..6ac2450 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -30,6 +30,7 @@ static inline struct platform_device *imx_add_platform_device(
#include <linux/fec.h>
struct imx_fec_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 885d8ba..9161a82 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -66,14 +66,31 @@
#define FEC_QUIRK_ENET_MAC (1 << 0)
/* Controller needs driver to swap frame */
#define FEC_QUIRK_SWAP_FRAME (1 << 1)
+/* Controller uses gasket */
+#define FEC_QUIRK_USE_GASKET (1 << 2)
static struct platform_device_id fec_devtype[] = {
{
- .name = DRIVER_NAME,
+ .name = "imx25-fec",
+ .driver_data = FEC_QUIRK_USE_GASKET,
+ }, {
+ .name = "imx27-fec",
.driver_data = 0,
}, {
.name = "imx28-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
+ }, {
+ .name = "imx35-fec",
+ .driver_data = 0,
+ }, {
+ .name = "imx50-fec",
+ .driver_data = FEC_QUIRK_USE_GASKET,
+ }, {
+ .name = "imx51-fec",
+ .driver_data = 0,
+ }, {
+ .name = "imx53-fec",
+ .driver_data = FEC_QUIRK_USE_GASKET,
},
{ }
};
@@ -425,7 +442,7 @@ fec_restart(struct net_device *ndev, int duplex)
} else {
#ifdef FEC_MIIGSK_ENR
- if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
+ if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) {
/* disable the gasket and wait */
writel(0, fep->hwp + FEC_MIIGSK_ENR);
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
@@ -434,8 +451,11 @@ fec_restart(struct net_device *ndev, int duplex)
/*
* configure the gasket:
* RMII, 50 MHz, no loopback, no echo
+ * MII, 25 MHz, no loopback, no echo
*/
- writel(1, fep->hwp + FEC_MIIGSK_CFGR);
+ writel((fep->phy_interface == PHY_INTERFACE_MODE_RMII) ?
+ 1 : 0, fep->hwp + FEC_MIIGSK_CFGR);
+
/* re-enable the gasket */
writel(2, fep->hwp + FEC_MIIGSK_ENR);
--
1.7.4.1
More information about the linux-arm-kernel
mailing list