[PATCH] omap3: nand: bch ecc support added
Ghorai, Sukumar
s-ghorai at ti.com
Fri Jul 8 13:35:59 EDT 2011
> -----Original Message-----
> From: Vimal Singh [mailto:vimal.newwork at gmail.com]
> Sent: Thursday, January 20, 2011 8:47 PM
> To: Ghorai, Sukumar
> Cc: linux-omap at vger.kernel.org; linux-mtd at lists.infradead.org; linux-arm-
> kernel at lists.infradead.org; Kamat, Nishant
> Subject: Re: [PATCH] omap3: nand: bch ecc support added
>
> Hi Ghorai,
>
> I am the initial author of this patch. And I guess this patch still
> uses most of my work.
[Ghorai] I know you are working on it,
But I think your code was in a shape for -
1. not for up-streamble shape
2. non functional,
So can you check this version matching with your original code?
In that case I can add your Signed-off.
>
>
> Thanks and Regards,
> Vimal
>
> On Thu, Jan 20, 2011 at 3:48 PM, Sukumar Ghorai <s-ghorai at ti.com> wrote:
> > bch error correction (t=4 and t=8) for 512 bytes support added.
> > Tested in omap-3630 es-1.1 silicon.
> >
> > Need to select the bch-ecc from board file. E.g.
> > arch/arm/mach-omap2/board-flash.c: board_nand_init()
> > board_nand_data.ecc_opt = OMAP_ECC_BCH4_CODE_HW
> >
> > This patch has dependency on -
> > http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42658.html
> >
> > Signed-off-by: Sukumar Ghorai <s-ghorai at ti.com>
> > ---
> > arch/arm/mach-omap2/gpmc.c | 126 ++++++++---
> > arch/arm/plat-omap/include/plat/gpmc.h | 6 +-
> > drivers/mtd/nand/Makefile | 1 +
> > drivers/mtd/nand/omap2.c | 119 ++++++++--
> > drivers/mtd/nand/omap_bch_decoder.c | 393
> ++++++++++++++++++++++++++++++++
> > 5 files changed, 583 insertions(+), 62 deletions(-)
> > create mode 100644 drivers/mtd/nand/omap_bch_decoder.c
> >
> > diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
> > index 29c9732..91cfdca 100644
> > --- a/arch/arm/mach-omap2/gpmc.c
> > +++ b/arch/arm/mach-omap2/gpmc.c
> > @@ -48,6 +48,7 @@
> > #define GPMC_ECC_CONTROL 0x1f8
> > #define GPMC_ECC_SIZE_CONFIG 0x1fc
> > #define GPMC_ECC1_RESULT 0x200
> > +#define GPMC_ECC_BCH_RESULT_0 0x240
> >
> > #define GPMC_CS0_OFFSET 0x60
> > #define GPMC_CS_SIZE 0x30
> > @@ -94,7 +95,6 @@ static struct resource gpmc_mem_root;
> > static struct resource gpmc_cs_mem[GPMC_CS_NUM];
> > static DEFINE_SPINLOCK(gpmc_mem_lock);
> > static unsigned int gpmc_cs_map; /* flag for cs which are
> initialized */
> > -static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
> >
> > static void __iomem *gpmc_base;
> >
> > @@ -832,52 +832,77 @@ void omap3_gpmc_restore_context(void)
> >
> > /**
> > * gpmc_enable_hwecc - enable hardware ecc functionality
> > + * @ecc_type: ecc type e.g. Hamming, BCH
> > * @cs: chip select number
> > * @mode: read/write mode
> > * @dev_width: device bus width(1 for x16, 0 for x8)
> > * @ecc_size: bytes for which ECC will be generated
> > */
> > -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
> > +int gpmc_enable_hwecc(int ecc_type, int cs, int mode,
> > + int dev_width, int ecc_size)
> > {
> > - unsigned int val;
> > -
> > - /* check if ecc module is in used */
> > - if (gpmc_ecc_used != -EINVAL)
> > - return -EINVAL;
> > -
> > - gpmc_ecc_used = cs;
> > -
> > - /* clear ecc and enable bits */
> > - val = ((0x00000001<<8) | 0x00000001);
> > - gpmc_write_reg(GPMC_ECC_CONTROL, val);
> > -
> > - /* program ecc and result sizes */
> > - val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
> > - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
> > + unsigned int bch_mod = 0, bch_wrapmode = 0, eccsize1 = 0,
> eccsize0 = 0;
> > + unsigned int ecc_conf_val = 0, ecc_size_conf_val = 0;
> >
> > switch (mode) {
> > case GPMC_ECC_READ:
> > - gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
> > + if (ecc_type == OMAP_ECC_BCH4_CODE_HW) {
> > + eccsize1 = 0xD; eccsize0 = 0x48;
> > + bch_mod = 0;
> > + bch_wrapmode = 0x09;
> > + } else if (ecc_type == OMAP_ECC_BCH8_CODE_HW) {
> > + eccsize1 = 0x1A; eccsize0 = 0x18;
> > + bch_mod = 1;
> > + bch_wrapmode = 0x04;
> > + } else
> > + eccsize1 = ((ecc_size >> 1) - 1) << 22;
> > break;
> > +
> > case GPMC_ECC_READSYN:
> > - gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
> > break;
> > +
> > case GPMC_ECC_WRITE:
> > - gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
> > + if (ecc_type == OMAP_ECC_BCH4_CODE_HW) {
> > + eccsize1 = 0x20; eccsize0 = 0x00;
> > + bch_mod = 0;
> > + bch_wrapmode = 0x06;
> > + } else if (ecc_type == OMAP_ECC_BCH8_CODE_HW) {
> > + eccsize1 = 0x20; eccsize0 = 0x00;
> > + bch_mod = 1;
> > + bch_wrapmode = 0x06;
> > + } else
> > + eccsize1 = ((ecc_size >> 1) - 1) << 22;
> > break;
> > +
> > default:
> > printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n",
> mode);
> > break;
> > }
> >
> > - /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
> > - val = (dev_width << 7) | (cs << 1) | (0x1);
> > - gpmc_write_reg(GPMC_ECC_CONFIG, val);
> > + /* clear ecc and enable bits */
> > + if ((ecc_type == OMAP_ECC_BCH4_CODE_HW) ||
> > + (ecc_type == OMAP_ECC_BCH8_CODE_HW)) {
> > + gpmc_write_reg(GPMC_ECC_CONTROL, 0x00000001);
> > + ecc_size_conf_val = (eccsize1 << 22) | (eccsize0 << 12);
> > + ecc_conf_val = ((0x01 << 16) | (bch_mod << 12)
> > + | (bch_wrapmode << 8) | (dev_width << 7)
> > + | (0x03 << 4) | (cs << 1) | (0x1));
> > + } else {
> > + gpmc_write_reg(GPMC_ECC_CONTROL, 0x00000101);
> > + ecc_size_conf_val = (eccsize1 << 22) | 0x0000000F;
> > + ecc_conf_val = (dev_width << 7) | (cs << 1) | (0x1);
> > + }
> > +
> > + gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, ecc_size_conf_val);
> > + gpmc_write_reg(GPMC_ECC_CONFIG, ecc_conf_val);
> > + gpmc_write_reg(GPMC_ECC_CONTROL, 0x00000101);
> > +
> > return 0;
> > }
> >
> > /**
> > * gpmc_calculate_ecc - generate non-inverted ecc bytes
> > + * @ecc_type: ecc type e.g. Hamming, BCH
> > * @cs: chip select number
> > * @dat: data pointer over which ecc is computed
> > * @ecc_code: ecc code buffer
> > @@ -888,20 +913,51 @@ int gpmc_enable_hwecc(int cs, int mode, int
> dev_width, int ecc_size)
> > * an erased page will produce an ECC mismatch between generated and
> read
> > * ECC bytes that has to be dealt with separately.
> > */
> > -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
> > +int gpmc_calculate_ecc(int ecc_type, int cs,
> > + const u_char *dat, u_char *ecc_code)
> > {
> > - unsigned int val = 0x0;
> > -
> > - if (gpmc_ecc_used != cs)
> > - return -EINVAL;
> > + unsigned int reg;
> > + unsigned int val1 = 0x0, val2 = 0x0;
> > + unsigned int val3 = 0x0, val4 = 0x0;
> > + int i;
> >
> > - /* read ecc result */
> > - val = gpmc_read_reg(GPMC_ECC1_RESULT);
> > - *ecc_code++ = val; /* P128e, ..., P1e */
> > - *ecc_code++ = val >> 16; /* P128o, ..., P1o */
> > - /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
> > - *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
> > + if ((ecc_type == OMAP_ECC_BCH4_CODE_HW) ||
> > + (ecc_type == OMAP_ECC_BCH8_CODE_HW)) {
> > + for (i = 0; i < 4; i++) {
> > + /*
> > + * Reading HW ECC_BCH_Results
> > + * 0x240-0x24C, 0x250-0x25C, 0x260-0x26C, 0x270-
> 0x27C
> > + */
> > + reg = GPMC_ECC_BCH_RESULT_0 + (0x10 * i);
> > + val1 = gpmc_read_reg(reg);
> > + val2 = gpmc_read_reg(reg + 4);
> > + if (ecc_type == OMAP_ECC_BCH8_CODE_HW) {
> > + val3 = gpmc_read_reg(reg + 8);
> > + val4 = gpmc_read_reg(reg + 12);
> > +
> > + *ecc_code++ = (val4 & 0xFF);
> > + *ecc_code++ = ((val3 >> 24) & 0xFF);
> > + *ecc_code++ = ((val3 >> 16) & 0xFF);
> > + *ecc_code++ = ((val3 >> 8) & 0xFF);
> > + *ecc_code++ = (val3 & 0xFF);
> > + *ecc_code++ = ((val2 >> 24) & 0xFF);
> > + }
> > + *ecc_code++ = ((val2 >> 16) & 0xFF);
> > + *ecc_code++ = ((val2 >> 8) & 0xFF);
> > + *ecc_code++ = (val2 & 0xFF);
> > + *ecc_code++ = ((val1 >> 24) & 0xFF);
> > + *ecc_code++ = ((val1 >> 16) & 0xFF);
> > + *ecc_code++ = ((val1 >> 8) & 0xFF);
> > + *ecc_code++ = (val1 & 0xFF);
> > + }
> > + } else {
> > + /* read ecc result */
> > + val1 = gpmc_read_reg(GPMC_ECC1_RESULT);
> > + *ecc_code++ = val1; /* P128e, ..., P1e */
> > + *ecc_code++ = val1 >> 16; /* P128o, ..., P1o */
> > + /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e,
> P256e */
> > + *ecc_code++ = ((val1 >> 8) & 0x0f) | ((val1 >> 20) &
> 0xf0);
> > + }
> >
> > - gpmc_ecc_used = -EINVAL;
> > return 0;
> > }
> > diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-
> omap/include/plat/gpmc.h
> > index 49aea09..838c185 100644
> > --- a/arch/arm/plat-omap/include/plat/gpmc.h
> > +++ b/arch/arm/plat-omap/include/plat/gpmc.h
> > @@ -92,6 +92,8 @@ enum omap_ecc {
> > OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
> > /* 1-bit ecc: stored at begining of spare area as romcode
> */
> > OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout
> */
> > + OMAP_ECC_BCH4_CODE_HW, /* gpmc bch detection & s/w method
> correction */
> > + OMAP_ECC_BCH8_CODE_HW, /* gpmc bch detection & s/w method
> correction */
> > };
> >
> > /*
> > @@ -156,6 +158,6 @@ extern int gpmc_cs_configure(int cs, int cmd, int
> wval);
> > extern int gpmc_nand_read(int cs, int cmd);
> > extern int gpmc_nand_write(int cs, int cmd, int wval);
> >
> > -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
> > -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
> > +int gpmc_enable_hwecc(int ecc, int cs, int mode, int dev_width, int
> ecc_size);
> > +int gpmc_calculate_ecc(int ecc, int cs, const u_char *dat, u_char
> *ecc_code);
> > #endif
> > diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> > index 8ad6fae..ae02711 100644
> > --- a/drivers/mtd/nand/Makefile
> > +++ b/drivers/mtd/nand/Makefile
> > @@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
> > obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
> > obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
> > obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o
> > +obj-$(CONFIG_MTD_NAND_OMAP2) += omap_bch_decoder.o
> > obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
> > obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
> > obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
> > diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> > index 4e33972..14c7dfe 100644
> > --- a/drivers/mtd/nand/omap2.c
> > +++ b/drivers/mtd/nand/omap2.c
> > @@ -98,6 +98,8 @@
> > static const char *part_probes[] = { "cmdlinepart", NULL };
> > #endif
> >
> > +int decode_bch(int select_4_8, unsigned char *ecc, unsigned int
> *err_loc);
> > +
> > /* oob info generated runtime depending on ecc algorithm and layout
> selected */
> > static struct nand_ecclayout omap_oobinfo;
> > /* Define some generic bad / good block scan pattern which are used
> > @@ -130,7 +132,8 @@ struct omap_nand_info {
> > OMAP_NAND_IO_WRITE, /* write */
> > } iomode;
> > u_char *buf;
> > - int buf_len;
> > + int buf_len;
> > + int ecc_opt;
> > };
> >
> > /**
> > @@ -529,7 +532,6 @@ static void omap_read_buf_irq_pref(struct mtd_info
> *mtd, u_char *buf, int len)
> > struct omap_nand_info *info = container_of(mtd,
> > struct omap_nand_info,
> mtd);
> > int ret = 0;
> > -
> > if (len <= mtd->oobsize) {
> > omap_read_buf_pref(mtd, buf, len);
> > return;
> > @@ -803,6 +805,8 @@ static int omap_correct_data(struct mtd_info *mtd,
> u_char *dat,
> > struct omap_nand_info *info = container_of(mtd, struct
> omap_nand_info,
> > mtd);
> > int blockCnt = 0, i = 0, ret = 0;
> > + int j, eccsize, eccflag, count;
> > + unsigned int err_loc[8];
> >
> > /* Ex NAND_ECC_HW12_2048 */
> > if ((info->nand.ecc.mode == NAND_ECC_HW) &&
> > @@ -811,16 +815,57 @@ static int omap_correct_data(struct mtd_info *mtd,
> u_char *dat,
> > else
> > blockCnt = 1;
> >
> > - for (i = 0; i < blockCnt; i++) {
> > - if (memcmp(read_ecc, calc_ecc, 3) != 0) {
> > - ret = omap_compare_ecc(read_ecc, calc_ecc, dat);
> > - if (ret < 0)
> > - return ret;
> > + switch (info->ecc_opt) {
> > + case OMAP_ECC_HAMMING_CODE_HW:
> > + case OMAP_ECC_HAMMING_CODE_HW_ROMCODE:
> > + for (i = 0; i < blockCnt; i++) {
> > + if (memcmp(read_ecc, calc_ecc, 3) != 0) {
> > + ret = omap_compare_ecc(read_ecc,
> calc_ecc, dat);
> > + if (ret < 0)
> > + return ret;
> > + }
> > + read_ecc += 3;
> > + calc_ecc += 3;
> > + dat += 512;
> > }
> > - read_ecc += 3;
> > - calc_ecc += 3;
> > - dat += 512;
> > + break;
> > +
> > + case OMAP_ECC_BCH4_CODE_HW:
> > + eccsize = 7;
> > + gpmc_calculate_ecc(info->ecc_opt, info->gpmc_cs, dat,
> calc_ecc);
> > + for (i = 0; i < blockCnt; i++) {
> > + /* check if any ecc error */
> > + eccflag = 0;
> > + for (j = 0; (j < eccsize) && (eccflag == 0);
> j++)
> > + if (calc_ecc[j] != 0)
> > + eccflag = 1;
> > +
> > + if (eccflag == 1) {
> > + eccflag = 0;
> > + for (j = 0; (j < eccsize) &&
> > + (eccflag == 0); j++)
> > + if (read_ecc[j] != 0xFF)
> > + eccflag = 1;
> > + }
> > +
> > + count = 0;
> > + if (eccflag == 1)
> > + count = decode_bch(0, calc_ecc,
> err_loc);
> > +
> > + for (j = 0; j < count; j++) {
> > + if (err_loc[j] < 4096)
> > + dat[err_loc[j] >> 3] ^=
> > + 1 << (err_loc[j]
> & 7);
> > + /* else, not interested to correct ecc
> */
> > + }
> > +
> > + calc_ecc = calc_ecc + eccsize;
> > + read_ecc = read_ecc + eccsize;
> > + dat += 512;
> > + }
> > + break;
> > }
> > +
> > return 0;
> > }
> >
> > @@ -841,7 +886,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd,
> const u_char *dat,
> > {
> > struct omap_nand_info *info = container_of(mtd, struct
> omap_nand_info,
> > mtd);
> > - return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code);
> > + return gpmc_calculate_ecc(info->ecc_opt, info->gpmc_cs, dat,
> ecc_code);
> > }
> >
> > /**
> > @@ -856,7 +901,8 @@ static void omap_enable_hwecc(struct mtd_info *mtd,
> int mode)
> > struct nand_chip *chip = mtd->priv;
> > unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 :
> 0;
> >
> > - gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info-
> >nand.ecc.size);
> > + gpmc_enable_hwecc(info->ecc_opt, info->gpmc_cs, mode,
> > + dev_width, info->nand.ecc.size);
> > }
> >
> > /**
> > @@ -953,6 +999,7 @@ static int __devinit omap_nand_probe(struct
> platform_device *pdev)
> > info->mtd.priv = &info->nand;
> > info->mtd.name = dev_name(&pdev->dev);
> > info->mtd.owner = THIS_MODULE;
> > + info->ecc_opt = pdata->ecc_opt;
> >
> > info->nand.options = pdata->devsize;
> > info->nand.options |= NAND_SKIP_BBTSCAN;
> > @@ -991,7 +1038,6 @@ static int __devinit omap_nand_probe(struct
> platform_device *pdev)
> > info->nand.waitfunc = omap_wait;
> > info->nand.chip_delay = 50;
> > }
> > -
> > switch (pdata->xfer_type) {
> > case NAND_OMAP_PREFETCH_POLLED:
> > info->nand.read_buf = omap_read_buf_pref;
> > @@ -1052,10 +1098,17 @@ static int __devinit omap_nand_probe(struct
> platform_device *pdev)
> > /* selsect the ecc type */
> > if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT)
> > info->nand.ecc.mode = NAND_ECC_SOFT;
> > - else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) ||
> > - (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) {
> > - info->nand.ecc.bytes = 3;
> > - info->nand.ecc.size = 512;
> > + else {
> > + if (pdata->ecc_opt == OMAP_ECC_BCH4_CODE_HW) {
> > + info->nand.ecc.bytes = 4*7;
> > + info->nand.ecc.size = 4*512;
> > + } else if (pdata->ecc_opt == OMAP_ECC_BCH8_CODE_HW) {
> > + info->nand.ecc.bytes = 13;
> > + info->nand.ecc.size = 4*512;
> > + } else {
> > + info->nand.ecc.bytes = 3;
> > + info->nand.ecc.size = 512;
> > + }
> > info->nand.ecc.calculate = omap_calculate_ecc;
> > info->nand.ecc.hwctl = omap_enable_hwecc;
> > info->nand.ecc.correct = omap_correct_data;
> > @@ -1073,8 +1126,8 @@ static int __devinit omap_nand_probe(struct
> platform_device *pdev)
> > }
> > }
> >
> > - /* rom code layout */
> > - if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) {
> > + /* select ecc lyout */
> > + if (info->nand.ecc.mode != NAND_ECC_SOFT) {
> >
> > if (info->nand.options & NAND_BUSWIDTH_16)
> > offset = 2;
> > @@ -1082,15 +1135,31 @@ static int __devinit omap_nand_probe(struct
> platform_device *pdev)
> > offset = 1;
> > info->nand.badblock_pattern =
> &bb_descrip_flashbased;
> > }
> > - omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16);
> > - for (i = 0; i < omap_oobinfo.eccbytes; i++)
> > - omap_oobinfo.eccpos[i] = i+offset;
> >
> > - omap_oobinfo.oobfree->offset = offset +
> omap_oobinfo.eccbytes;
> > - omap_oobinfo.oobfree->length = info->mtd.oobsize -
> > - (offset +
> omap_oobinfo.eccbytes);
> > + if (info->mtd.oobsize == 64)
> > + omap_oobinfo.eccbytes = info->nand.ecc.bytes *
> > + 2048/info-
> >nand.ecc.size;
> > + else
> > + omap_oobinfo.eccbytes = info->nand.ecc.bytes;
> > +
> > + if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)
> {
> > + for (i = 0; i < omap_oobinfo.eccbytes; i++)
> > + omap_oobinfo.eccpos[i] = i + offset;
> > + omap_oobinfo.oobfree->offset =
> > + offset +
> omap_oobinfo.eccbytes;
> > + omap_oobinfo.oobfree->length = info->mtd.oobsize
> -
> > + offset -
> omap_oobinfo.eccbytes;
> > + } else {
> >
> > + omap_oobinfo.oobfree->offset = offset;
> > + omap_oobinfo.oobfree->length = info->mtd.oobsize
> -
> > + offset -
> omap_oobinfo.eccbytes;
> > + offset = info->mtd.oobsize -
> omap_oobinfo.eccbytes;
> > + for (i = 0; i < omap_oobinfo.eccbytes; i++)
> > + omap_oobinfo.eccpos[i] = i + offset;
> > + }
> > info->nand.ecc.layout = &omap_oobinfo;
> > +
> > }
> >
> > #ifdef CONFIG_MTD_PARTITIONS
> > diff --git a/drivers/mtd/nand/omap_bch_decoder.c
> b/drivers/mtd/nand/omap_bch_decoder.c
> > new file mode 100644
> > index 0000000..da42bda
> > --- /dev/null
> > +++ b/drivers/mtd/nand/omap_bch_decoder.c
> > @@ -0,0 +1,393 @@
> > +/*
> > + * drivers/mtd/nand/omap_omap_bch_decoder.c
> > + *
> > + * Whole BCH ECC Decoder (Post hardware generated syndrome decoding)
> > + *
> > + * Copyright (c) 2007 Texas Instruments
> > + *
> > + * Author: Sukumar Ghorai <s-ghorai at ti.com
> > + * Michael Fillinger <m-fillinger at ti.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +#undef DEBUG
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +
> > +#define mm 13
> > +#define kk_shorten 4096
> > +#define nn 8191 /* Length of codeword, n = 2**mm - 1 */
> > +
> > +#define PPP 0x201B /* Primary Polynomial : x^13 + x^4 + x^3 + x + 1
> */
> > +#define P 0x001B /* With omitted x^13 */
> > +#define POLY 12 /* degree of the primary Polynomial less one */
> > +
> > +/**
> > + * mpy_mod_gf - GALOIS field multiplier
> > + * Input : A(x), B(x)
> > + * Output : A(x)*B(x) mod P(x)
> > + */
> > +static unsigned int mpy_mod_gf(unsigned int a, unsigned int b)
> > +{
> > + unsigned int R = 0;
> > + unsigned int R1 = 0;
> > + unsigned int k = 0;
> > +
> > + for (k = 0; k < mm; k++) {
> > +
> > + R = (R << 1) & 0x1FFE;
> > + if (R1 == 1)
> > + R ^= P;
> > +
> > + if (((a >> (POLY - k)) & 1) == 1)
> > + R ^= b;
> > +
> > + if (k < POLY)
> > + R1 = (R >> POLY) & 1;
> > + }
> > + return R;
> > +}
> > +
> > +/**
> > + * chien - CHIEN search
> > + *
> > + * @location - Error location vector pointer
> > + *
> > + * Inputs : ELP(z)
> > + * No. of found errors
> > + * Size of input codeword
> > + * Outputs : Up to 8 locations
> > + * No. of errors
> > + */
> > +static int chien(unsigned int select_4_8, int err_nums,
> > + unsigned int err[], unsigned int
> *location)
> > +{
> > + int i, count; /* Number of dectected errors */
> > + /* Contains accumulation of evaluation at x^i (i:1->8) */
> > + unsigned int gammas[8] = {0};
> > + unsigned int alpha;
> > + unsigned int bit, ecc_bits;
> > + unsigned int elp_sum;
> > +
> > + ecc_bits = (select_4_8 == 0) ? 52 : 104;
> > +
> > + /* Start evaluation at Alpha**8192 and decreasing */
> > + for (i = 0; i < 8; i++)
> > + gammas[i] = err[i];
> > +
> > + count = 0;
> > + for (i = 1; (i <= nn) && (count < err_nums); i++) {
> > +
> > + /* Result of evaluation at root */
> > + elp_sum = 1 ^ gammas[0] ^ gammas[1] ^
> > + gammas[2] ^ gammas[3] ^
> > + gammas[4] ^ gammas[5] ^
> > + gammas[6] ^ gammas[7];
> > +
> > + alpha = PPP >> 1;
> > + gammas[0] = mpy_mod_gf(gammas[0], alpha);
> > + alpha = mpy_mod_gf(alpha, (PPP >> 1)); /* x alphha^-2
> */
> > + gammas[1] = mpy_mod_gf(gammas[1], alpha);
> > + alpha = mpy_mod_gf(alpha, (PPP >> 1)); /* x alphha^-2
> */
> > + gammas[2] = mpy_mod_gf(gammas[2], alpha);
> > + alpha = mpy_mod_gf(alpha, (PPP >> 1)); /* x alphha^-3
> */
> > + gammas[3] = mpy_mod_gf(gammas[3], alpha);
> > + alpha = mpy_mod_gf(alpha, (PPP >> 1)); /* x alphha^-4
> */
> > + gammas[4] = mpy_mod_gf(gammas[4], alpha);
> > + alpha = mpy_mod_gf(alpha, (PPP >> 1)); /* x alphha^-5
> */
> > + gammas[5] = mpy_mod_gf(gammas[5], alpha);
> > + alpha = mpy_mod_gf(alpha, (PPP >> 1)); /* x alphha^-6
> */
> > + gammas[6] = mpy_mod_gf(gammas[6], alpha);
> > + alpha = mpy_mod_gf(alpha, (PPP >> 1)); /* x alphha^-7
> */
> > + gammas[7] = mpy_mod_gf(gammas[7], alpha);
> > +
> > + if (elp_sum == 0) {
> > + /* calculate bit position in main data area */
> > + bit = ((i-1) & ~7)|(7-((i-1) & 7));
> > + if (i >= 2 * ecc_bits)
> > + location[count++] =
> > + kk_shorten - (bit - 2 *
> ecc_bits) - 1;
> > + }
> > + }
> > +
> > + /* Failure: No. of detected errors != No. or corrected errors */
> > + if (count != err_nums) {
> > + count = -1;
> > + printk(KERN_ERR "BCH decoding failed\n");
> > + }
> > + for (i = 0; i < count; i++)
> > + pr_debug("%d ", location[i]);
> > +
> > + return count;
> > +}
> > +
> > +/* synd : 16 Syndromes
> > + * return: gamaas - Coefficients to the error polynomial
> > + * return: : Number of detected errors
> > +*/
> > +static unsigned int berlekamp(unsigned int select_4_8,
> > + unsigned int synd[], unsigned int err[])
> > +{
> > + int loop, iteration;
> > + unsigned int LL = 0; /* Detected errors */
> > + unsigned int d = 0; /* Distance between Syndromes and
> ELP[n](z) */
> > + unsigned int invd = 0; /* Inverse of d */
> > + /* Intermediate ELP[n](z).
> > + * Final ELP[n](z) is Error Location Polynomial
> > + */
> > + unsigned int gammas[16] = {0};
> > + /* Intermediate normalized ELP[n](z) : D[n](z) */
> > + unsigned int D[16] = {0};
> > + /* Temporary value that holds an ELP[n](z) coefficient */
> > + unsigned int next_gamma = 0;
> > +
> > + int e = 0;
> > + unsigned int sign = 0;
> > + unsigned int u = 0;
> > + unsigned int v = 0;
> > + unsigned int C1 = 0, C2 = 0;
> > + unsigned int ss = 0;
> > + unsigned int tmp_v = 0, tmp_s = 0;
> > + unsigned int tmp_poly;
> > +
> > + /*-------------- Step 0 ------------------*/
> > + for (loop = 0; loop < 16; loop++)
> > + gammas[loop] = 0;
> > + gammas[0] = 1;
> > + D[1] = 1;
> > +
> > + iteration = 0;
> > + LL = 0;
> > + while ((iteration < ((select_4_8+1)*2*4)) &&
> > + (LL <= ((select_4_8+1)*4))) {
> > +
> > + pr_debug("\nIteration.............%d\n", iteration);
> > + d = 0;
> > + /* Step: 0 */
> > + for (loop = 0; loop <= LL; loop++) {
> > + tmp_poly = mpy_mod_gf(
> > + gammas[loop], synd[iteration -
> loop]);
> > + d ^= tmp_poly;
> > + pr_debug("%02d. s=0 LL=%x poly %x\n",
> > + loop, LL, tmp_poly);
> > + }
> > +
> > + /* Step 1: 1 cycle only to perform inversion */
> > + v = d << 1;
> > + e = -1;
> > + sign = 1;
> > + ss = 0x2000;
> > + invd = 0;
> > + u = PPP;
> > + for (loop = 0; (d != 0) && (loop <= (2 * POLY)); loop++)
> {
> > + pr_debug("%02d. s=1 LL=%x poly NULL\n",
> > + loop, LL);
> > + C1 = (v >> 13) & 1;
> > + C2 = C1 & sign;
> > +
> > + sign ^= C2 ^ (e == 0);
> > +
> > + tmp_v = v;
> > + tmp_s = ss;
> > +
> > + if (C1 == 1) {
> > + v ^= u;
> > + ss ^= invd;
> > + }
> > + v = (v << 1) & 0x3FFF;
> > + if (C2 == 1) {
> > + u = tmp_v;
> > + invd = tmp_s;
> > + e = -e;
> > + }
> > + invd >>= 1;
> > + e--;
> > + }
> > +
> > + for (loop = 0; (d != 0) && (loop <= (iteration + 1));
> loop++) {
> > + /* Step 2
> > + * Interleaved with Step 3, if L<(n-k)
> > + * invd: Update of ELP[n](z) = ELP[n-1](z) -
> d.D[n-1](z)
> > + */
> > +
> > + /* Holds value of ELP coefficient until
> precedent
> > + * value does not have to be used anymore
> > + */
> > + tmp_poly = mpy_mod_gf(d, D[loop]);
> > + pr_debug("%02d. s=2 LL=%x poly %x\n",
> > + loop, LL, tmp_poly);
> > +
> > + next_gamma = gammas[loop] ^ tmp_poly;
> > + if ((2 * LL) < (iteration + 1)) {
> > + /* Interleaving with Step 3
> > + * for parallelized update of ELP(z) and
> D(z)
> > + */
> > + } else {
> > + /* Update of ELP(z) only -> stay in Step
> 2 */
> > + gammas[loop] = next_gamma;
> > + if (loop == (iteration + 1)) {
> > + /* to step 4 */
> > + break;
> > + }
> > + }
> > +
> > + /* Step 3
> > + * Always interleaved with Step 2 (case when
> L<(n-k))
> > + * Update of D[n-1](z) = ELP[n-1](z)/d
> > + */
> > + D[loop] = mpy_mod_gf(gammas[loop], invd);
> > + pr_debug("%02d. s=3 LL=%x poly %x\n",
> > + loop, LL, D[loop]);
> > +
> > + /* Can safely update ELP[n](z) */
> > + gammas[loop] = next_gamma;
> > +
> > + if (loop == (iteration + 1)) {
> > + /* If update finished */
> > + LL = iteration - LL + 1;
> > + /* to step 4 */
> > + break;
> > + }
> > + /* Else, interleaving to step 2*/
> > + }
> > +
> > + /* Step 4: Update D(z): i:0->L */
> > + /* Final update of D[n](z) = D[n](z).z*/
> > + for (loop = 0; loop < 15; loop++) /* Left Shift */
> > + D[15 - loop] = D[14 - loop];
> > +
> > + D[0] = 0;
> > +
> > + iteration++;
> > + } /* while */
> > +
> > + /* Processing finished, copy ELP to final registers : 0->2t-1*/
> > + for (loop = 0; loop < 8; loop++)
> > + err[loop] = gammas[loop+1];
> > +
> > + pr_debug("\n Err poly:");
> > + for (loop = 0; loop < 8; loop++)
> > + pr_debug("0x%x ", err[loop]);
> > +
> > + return LL;
> > +}
> > +
> > +/*
> > + * syndrome - Generate syndrome components from hw generate syndrome
> > + * r(x) = c(x) + e(x)
> > + * s(x) = c(x) mod g(x) + e(x) mod g(x) = e(x) mod g(x)
> > + * so receiver checks if the syndrome s(x) = r(x) mod g(x) is equal to
> zero.
> > + * unsigned int s[16]; - Syndromes
> > + */
> > +static void syndrome(unsigned int select_4_8,
> > + unsigned char *ecc, unsigned int
> syn[])
> > +{
> > + unsigned int k, l, t;
> > + unsigned int alpha_bit, R_bit;
> > + int ecc_pos, ecc_min;
> > +
> > + /* 2t-1 = 15 (for t=8) minimal polynomials of the first 15
> powers of a
> > + * primitive elemmants of GF(m); Even powers minimal polynomials
> are
> > + * duplicate of odd powers' minimal polynomials.
> > + * Odd powers of alpha (1 to 15)
> > + */
> > + unsigned int pow_alpha[8] = {0x0002, 0x0008, 0x0020, 0x0080,
> > + 0x0200, 0x0800, 0x001B, 0x006C};
> > +
> > + pr_debug("\n ECC[0..n]: ");
> > + for (k = 0; k < 13; k++)
> > + pr_debug("0x%x ", ecc[k]);
> > +
> > + if (select_4_8 == 0) {
> > + t = 4;
> > + ecc_pos = 55; /* bits(52-bits): 55->4 */
> > + ecc_min = 4;
> > + } else {
> > + t = 8;
> > + ecc_pos = 103; /* bits: 103->0 */
> > + ecc_min = 0;
> > + }
> > +
> > + /* total numbber of syndrom to be used is 2t */
> > + /* Step1: calculate the odd syndrome(s) */
> > + R_bit = ((ecc[ecc_pos/8] >> (7 - ecc_pos%8)) & 1);
> > + ecc_pos--;
> > + for (k = 0; k < t; k++)
> > + syn[2 * k] = R_bit;
> > +
> > + while (ecc_pos >= ecc_min) {
> > + R_bit = ((ecc[ecc_pos/8] >> (7 - ecc_pos%8)) & 1);
> > + ecc_pos--;
> > +
> > + for (k = 0; k < t; k++) {
> > + /* Accumulate value of x^i at alpha^(2k+1) */
> > + if (R_bit == 1)
> > + syn[2*k] ^= pow_alpha[k];
> > +
> > + /* Compute a**(2k+1), using LSFR */
> > + for (l = 0; l < (2 * k + 1); l++) {
> > + alpha_bit = (pow_alpha[k] >> POLY) & 1;
> > + pow_alpha[k] = (pow_alpha[k] << 1) &
> 0x1FFF;
> > + if (alpha_bit == 1)
> > + pow_alpha[k] ^= P;
> > + }
> > + }
> > + }
> > +
> > + /* Step2: calculate the even syndrome(s)
> > + * Compute S(a), where a is an even power of alpha
> > + * Evenry even power of primitive element has the same minimal
> > + * polynomial as some odd power of elemets.
> > + * And based on S(a^2) = S^2(a)
> > + */
> > + for (k = 0; k < t; k++)
> > + syn[2*k+1] = mpy_mod_gf(syn[k], syn[k]);
> > +
> > + pr_debug("\n Syndromes: ");
> > + for (k = 0; k < 16; k++)
> > + pr_debug("0x%x ", syn[k]);
> > +}
> > +
> > +/**
> > + * decode_bch - BCH decoder for 4- and 8-bit error correction
> > + *
> > + * @ecc - ECC syndrome generated by hw BCH engine
> > + * @err_loc - pointer to error location array
> > + *
> > + * This function does post sydrome generation (hw generated) decoding
> > + * for:-
> > + * Dimension of Galoise Field: m = 13
> > + * Length of codeword: n = 2**m - 1
> > + * Number of errors that can be corrected: 4- or 8-bits
> > + * Length of information bit: kk = nn - rr
> > + */
> > +int decode_bch(int select_4_8, unsigned char *ecc, unsigned int
> *err_loc)
> > +{
> > + int no_of_err;
> > + unsigned int syn[16] = {0,}; /* 16 Syndromes */
> > + unsigned int err_poly[8] = {0,};
> > + /* Coefficients to the error polynomial
> > + * ELP(x) = 1 + err0.x + err1.x^2 + ... + err7.x^8
> > + */
> > +
> > + /* Decoting involes three steps
> > + * 1. Compute the syndrom from teh received codeword,
> > + * 2. Find the error location polynomial from a set of equations
> > + * derived from the syndrome,
> > + * 3. Use the error location polynomial to identify errants bits,
> > + *
> > + * And correcttion done by bit flips using error locaiton and
> expected
> > + * to be outseide of this implementation.
> > + */
> > + syndrome(select_4_8, ecc, syn);
> > + no_of_err = berlekamp(select_4_8, syn, err_poly);
> > + if (no_of_err <= (4 << select_4_8))
> > + no_of_err = chien(select_4_8, no_of_err, err_poly,
> err_loc);
> > +
> > + return no_of_err;
> > +}
> > +EXPORT_SYMBOL(decode_bch);
> > +
> > --
> > 1.7.0.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
>
>
> --
> Regards,
> Vimal Singh
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
More information about the linux-arm-kernel
mailing list