August 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Aug 1 00:48:05 EDT 2012
Ending: Fri Aug 31 23:55:58 EDT 2012
Messages: 5078

• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Arnaud Patard (Rtp)
• [patch] ARM: Kirkwood: Fix iconnect leds   Arnaud Patard (Rtp)
• [patch] ARM: Kirkwood: fix Makefile.boot   Arnaud Patard (Rtp)
• [patch 1/2] ARM: Kirkwood: Describe iconnect keys in DT.   Arnaud Patard (Rtp)
• [patch 2/2] ARM: Kirkwood: Describe iconnect nand in DT.   Arnaud Patard (Rtp)
• [GIT PULL] orion/kirkwood fixes for v3.6   Arnaud Patard (Rtp)
• [PATCH] cpuidle: Prevent null pointer dereference in cpuidle_coupled_cpu_notify   Jon Medhurst (Tixy)
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Jon Medhurst (Tixy)
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Jon Medhurst (Tixy)
• SLAVE Side SPI kernel driver development   Bastelli Carlo (yahoo)
• [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp   ABRAHAM, KISHON VIJAY
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   ABRAHAM, KISHON VIJAY
• [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module   ABRAHAM, KISHON VIJAY
• [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb   ABRAHAM, KISHON VIJAY
• [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb   ABRAHAM, KISHON VIJAY
• [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c   ABRAHAM, KISHON VIJAY
• [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue   ABRAHAM, KISHON VIJAY
• [PATCH v6 00/11] omap: musb: Add device tree support   ABRAHAM, KISHON VIJAY
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   ABRAHAM, KISHON VIJAY
• [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver   ABRAHAM, KISHON VIJAY
• ioremap() fail on physical address 0x0 in 3.4 kernel   Laura Abbott
• CMA page migration failure due to buffers on bh_lru   Laura Abbott
• CMA page migration failure due to buffers on bh_lru   Laura Abbott
• [PATCH] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Thomas Abraham
• [PATCH 2/4] arm/dts: exynos4: Add DTS files derived from common Exynos4   Thomas Abraham
• [PATCH 3/4] arm/dts: exynos4: Add DTS file for ODROID-X   Thomas Abraham
• [PATCH 05/11] ARM: exynos: exynos_pm_add_dev_to_genpd may be unused   Thomas Abraham
• [PATCH 10/11] spi/s3c64xx: improve error handling   Thomas Abraham
• [PATCH v2 0/4] pinctrl: add support for samsung pinctrl driver   Thomas Abraham
• [PATCH v2 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH v2 2/4] pinctrl: add exynos4210 specific extensions for samsung pinctrl driver   Thomas Abraham
• [PATCH v2 3/4] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Thomas Abraham
• [PATCH v2 4/4] ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used   Thomas Abraham
• [PATCH 0/2] Enable pinctrl driver support for Exynos4210 based platforms   Thomas Abraham
• [PATCH 1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC   Thomas Abraham
• [PATCH 2/2] ARM: EXYNOS: Enable PINCTRL config option for Exynos4 device tree enabled platform   Thomas Abraham
• [PATCH 1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC   Thomas Abraham
• [PATCH v2 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH v2 2/4] pinctrl: add exynos4210 specific extensions for samsung pinctrl driver   Thomas Abraham
• [PATCH v2 3/4] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Thomas Abraham
• [PATCH v2 4/4] ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used   Thomas Abraham
• [PATCH 2/2] ARM: EXYNOS: Enable PINCTRL config option for Exynos4 device tree enabled platform   Thomas Abraham
• [PATCH v2 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH v3 0/4] pinctrl: add support for samsung pinctrl driver   Thomas Abraham
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH v3 2/4] pinctrl: add exynos4210 specific extensions for samsung pinctrl driver   Thomas Abraham
• [PATCH v3 3/4] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Thomas Abraham
• [PATCH v3 4/4] ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used   Thomas Abraham
• [PATCH v2 0/2] ARM: Exynos4-DT: Enable pinctrl driver support   Thomas Abraham
• [PATCH v2 1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC   Thomas Abraham
• [PATCH v2 2/2] ARM: EXYNOS: Enable pinctrl driver support for Exynos4 device tree enabled platform   Thomas Abraham
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH v3 0/3] ARM: Exynos5: Add support for MSHC controller   Thomas Abraham
• [PATCH v3 1/3] ARM: Samsung: Add support for MSHC controller clocks   Thomas Abraham
• [PATCH v3 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers   Thomas Abraham
• [PATCH v3 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Thomas Abraham
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Thomas Abraham
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Thomas Abraham
• [PATCH v3 1/3] ARM: Samsung: Add support for MSHC controller clocks   Thomas Abraham
• [PATCH v3 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers   Thomas Abraham
• [PATCH v3 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Thomas Abraham
• [PATCH v2 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH] ARM: Exynos4: Turn off clocks for NAND, OneNAND and TSI controllers   Thomas Abraham
• [PATCH 1/3] ARM: EXYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Thomas Abraham
• [PATCH 2/3] gpio: samsung: Add support for Exynos4x12 SoCs   Thomas Abraham
• [PATCH 0/3] ARM: EXYNOS: Add support for GPIO on Exynos4x12   Thomas Abraham
• [PATCH v4 0/3] ARM: Exynos: Add support for MSHC controller   Thomas Abraham
• [PATCH v4 1/3] ARM: Samsung: Add support for MSHC controller clocks   Thomas Abraham
• [PATCH v4 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers   Thomas Abraham
• [PATCH v4 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Thomas Abraham
• [PATCH v3 1/4] ARM: EXYNOS: Add set_irq_affinity function for combiner_irq   Thomas Abraham
• [PATCH v3 2/4] ARM: EXYNOS: Correct combined IRQs for exynos4412   Thomas Abraham
• [PATCH v3 4/4] ARM: EXYNOS: Add arm-pmu DT binding for exynos5250   Thomas Abraham
• [PATCH 1/6] ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to Exynos4.dtsi   Thomas Abraham
• [PATCH 2/6] ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210   Thomas Abraham
• [PATCH 3/6] ARM: Exynos4: dts: Specify address and size cells for i2c controllers   Thomas Abraham
• [PATCH 4/6] ARM: Exynos4: Add OF compatibility lookups for Exynos4 i2c adapters   Thomas Abraham
• [PATCH 6/6] ARM: Exynos: Add basic dts file for Samsung Trats board   Thomas Abraham
• [PATCH RESEND 0/6] ARM: EXYNOS: Add support for Trats board using device tree   Thomas Abraham
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Yanes Martinez Adrian
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Yanes Martinez Adrian
• [RFC PATCH 1/1] ASoC: soc-dapm: warn if no avaiable path found for widget kcontrol   Dong Aisheng
• [RFC PATCH 1/1] ASoC: soc-dapm: warn if no avaiable path found for widget kcontrol   Dong Aisheng
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Dong Aisheng
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Dong Aisheng
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH 0/7] add imx-syscon driver for general registers access   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 2/7] ARM: imx6q: add iomuxc gpr support into imx-syscon   Dong Aisheng
• [PATCH 3/7] ARM: imx6q: add anatop support into imx-syscon   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH 5/7] ARM: imx6q: convert to use imx-syscon to access anatop registers   Dong Aisheng
• [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH v2 0/7] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v2 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v2 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v2 3/7] ARM: imx6q: add anatop support into syscon   Dong Aisheng
• [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v2 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH v2 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH v2 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v3 0/7] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v3 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v3 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v3 3/7] ARM: imx6q: add anatop support into syscon   Dong Aisheng
• [PATCH v3 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v3 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v3 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH v3 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH v3 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v4 0/7] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v4 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v4 3/7] ARM: imx6q: add anatop support into syscon   Dong Aisheng
• [PATCH v4 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v4 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v4 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• MX28 & finding out boot mode   Dong Aisheng
• Enable messages during kernel boot on kernels v 3.*   Dmitriy Alekseev
• [PATCH V3 0/5] arm: samsung: Move FIMD headers to include/video/   Leela Krishna Amudala
• [PATCH V3 1/5] include/video: Add samsung FIMD register header   Leela Krishna Amudala
• [PATCH V3 2/5] include/video: Add Exynos5 specific FIMD register offsets   Leela Krishna Amudala
• [PATCH V3 3/5] arm: samsung: Include the modified FIMD header file   Leela Krishna Amudala
• [PATCH V3 4/5] driver: Include the modified FIMD header file   Leela Krishna Amudala
• [PATCH V3 5/5] arm: samsung: delete frame buffer header files from platform   Leela Krishna Amudala
• [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/   Leela Krishna Amudala
• [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/   Leela Krishna Amudala
• [PATCH V4 1/2] include/video: move fimd register headers from platform to include/video   Leela Krishna Amudala
• [PATCH V4 2/2] include/video: Add register offsets for FIMD version 8   Leela Krishna Amudala
• [PATCH V3] CS89x0 : Use ioread16/iowrite16 on all platforms   Domenico Andreoli
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Domenico Andreoli
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Domenico Andreoli
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   AnilKumar, Chimata
• [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar, Chimata
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   AnilKumar, Chimata
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   AnilKumar, Chimata
• [PATCH v2 0/4] Add AM33XX regulators device tree data   AnilKumar, Chimata
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   AnilKumar, Chimata
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   AnilKumar, Chimata
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   AnilKumar, Chimata
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   AnilKumar, Chimata
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   AnilKumar, Chimata
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   AnilKumar, Chimata
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   AnilKumar, Chimata
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   AnilKumar, Chimata
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   AnilKumar, Chimata
• [PATCH v4 2/4] mfd: omap: control: core system control driver   AnilKumar, Chimata
• [PATCH 4/5] leds: leds-gpio: adopt pinctrl support   AnilKumar, Chimata
• [PATCH] ARM: OMAP2+: twl-common: Fix compile time error when omap-twl4030 audio is not enabled   Austin, Brian
• [PATCH v6 0/3] Updated Cortex-M3 series   Jonathan Austin
• Why the region area don't decrease 1 in function sanity_check_meminfo?   Jonathan Austin
• Why the region area don't decrease 1 in function sanity_check_meminfo?   Jonathan Austin
• Discontiguous memory and cacheflush   Jonathan Austin
• Discontiguous memory and cacheflush   Jonathan Austin
• [PATCH] arm: mm: Fix vmalloc overlap check for !HIGHMEM   Jonathan Austin
• [RESEND PATCH] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH] ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent   Mandeep Singh Baines
• [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp   Felipe Balbi
• [PATCH v2 2/2] arm/dts: omap4: Add ocp2scp data   Felipe Balbi
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   Felipe Balbi
• [PATCH v6 02/11] arm/dts: omap: Add omap-usb2 dt data   Felipe Balbi
• [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Felipe Balbi
• [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module   Felipe Balbi
• [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb   Felipe Balbi
• [PATCH v6 06/11] arm/dts: Add twl6030-usb data   Felipe Balbi
• [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb   Felipe Balbi
• [PATCH v6 08/11] arm/dts: Add twl4030-usb data   Felipe Balbi
• [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue   Felipe Balbi
• [PATCH v6 10/11] arm/dts: omap: Add usb_otg and glue data   Felipe Balbi
• [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c   Felipe Balbi
• [PATCH 1/4] arm/dts: omap5-evm: Add I2C support   Felipe Balbi
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   Felipe Balbi
• [PATCH v6 00/11] omap: musb: Add device tree support   Felipe Balbi
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Felipe Balbi
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   Felipe Balbi
• [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp   Felipe Balbi
• [PATCH 0/4] i2c: omap: few more patches   Felipe Balbi
• [PATCH 1/4] i2c: omap: always return IRQ_HANDLED   Felipe Balbi
• [PATCH 2/4] i2c: omap: switch to threaded IRQ support   Felipe Balbi
• [PATCH 3/4] i2c: omap: remove unnecessary pm_runtime_suspended check   Felipe Balbi
• [PATCH 4/4] i2c: omap: switch over to autosuspend API   Felipe Balbi
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Felipe Balbi
• [PATCH] i2c: omap: sanitize exit path   Felipe Balbi
• [PATCH 4/4] i2c: omap: switch over to autosuspend API   Felipe Balbi
• [PATCH] i2c: omap: switch over to autosuspend API   Felipe Balbi
• [PATCH v3] i2c: omap: switch over to autosuspend API   Felipe Balbi
• [PATCH v3] i2c: omap: switch over to autosuspend API   Felipe Balbi
• [PATCH v3] i2c: omap: switch over to autosuspend API   Felipe Balbi
• [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Felipe Balbi
• [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support   Felipe Balbi
• [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Felipe Balbi
• [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Felipe Balbi
• [PATCHv6 24/24] i2c: omap: Prevent NULL pointer dereference in remove   Felipe Balbi
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Felipe Balbi
• [RFC/PATCH 00/13] OMAP UART patches   Felipe Balbi
• [RFC/PATCH 01/13] serial: omap: define and use to_uart_omap_port()   Felipe Balbi
• [RFC/PATCH 02/13] serial: omap: always return IRQ_HANDLED   Felipe Balbi
• [RFC/PATCH 03/13] serial: omap: define helpers for pdata function pointers   Felipe Balbi
• [RFC/PATCH 04/13] serial: omap: don't access the platform_device   Felipe Balbi
• [RFC/PATCH 05/13] serial: omap: drop DMA support   Felipe Balbi
• [RFC/PATCH 06/13] serial: add OMAP-specific defines   Felipe Balbi
• [RFC/PATCH 07/13] serial: omap: simplify IRQ handling   Felipe Balbi
• [RFC/PATCH 08/13] serial: omap: refactor receive_chars() into rdi/rlsi handlers   Felipe Balbi
• [RFC/PATCH 09/13] serial: omap: move THRE check to transmit_chars()   Felipe Balbi
• [RFC/PATCH 10/13] serial: omap: stick to put_autosuspend   Felipe Balbi
• [RFC/PATCH 11/13] serial: omap: set dev->drvdata before enabling pm_runtime   Felipe Balbi
• [RFC/PATCH 12/13] serial: omap: drop unnecessary check from remove   Felipe Balbi
• [RFC/PATCH 13/13] serial: omap: make sure to suspend device before remove   Felipe Balbi
• [RFC/PATCH 05/13] serial: omap: drop DMA support   Felipe Balbi
• [PATCH 4/5] ARM: OMAP4: Add L2 Cache Controller in Device Tree   Felipe Balbi
• [RFC/PATCH 05/13] serial: omap: drop DMA support   Felipe Balbi
• [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver   Felipe Balbi
• [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver   Felipe Balbi
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad support   Felipe Balbi
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Felipe Balbi
• [RFC/PATCH 10/13] serial: omap: stick to put_autosuspend   Felipe Balbi
• [RFC/PATCH 10/13] serial: omap: stick to put_autosuspend   Felipe Balbi
• [RFC/PATCH 10/13] serial: omap: stick to put_autosuspend   Felipe Balbi
• [RFC/PATCH 02/13] serial: omap: always return IRQ_HANDLED   Felipe Balbi
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Felipe Balbi
• [PATCH v2 00/13] OMAP Serial patches   Felipe Balbi
• [PATCH v2 01/13] serial: omap: define and use to_uart_omap_port()   Felipe Balbi
• [PATCH v2 02/13] serial: omap: define helpers for pdata function pointers   Felipe Balbi
• [PATCH v2 03/13] serial: omap: don't access the platform_device   Felipe Balbi
• [PATCH v2 04/13] serial: omap: drop DMA support   Felipe Balbi
• [PATCH v2 05/13] serial: add OMAP-specific defines   Felipe Balbi
• [PATCH v2 06/13] serial: omap: simplify IRQ handling   Felipe Balbi
• [PATCH v2 07/13] serial: omap: refactor receive_chars() into rdi/rlsi handlers   Felipe Balbi
• [PATCH v2 08/13] serial: omap: move THRE check to transmit_chars()   Felipe Balbi
• [PATCH v2 09/13] serial: omap: stick to put_autosuspend   Felipe Balbi
• [PATCH v2 10/13] serial: omap: set dev->drvdata before enabling pm_runtime   Felipe Balbi
• [PATCH v2 11/13] serial: omap: drop unnecessary check from remove   Felipe Balbi
• [PATCH v2 12/13] serial: omap: make sure to suspend device before remove   Felipe Balbi
• [PATCH v2 13/13] serial: omap: don't save IRQ flags on hardirq   Felipe Balbi
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Felipe Balbi
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH v2 00/13] OMAP Serial patches   Felipe Balbi
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH v2 00/13] OMAP Serial patches   Felipe Balbi
• [PATCH v2 00/13] OMAP Serial patches   Felipe Balbi
• [PATCH v3 00/23] OMAP UART patches   Felipe Balbi
• [PATCH v3 01/23] serial: omap: define and use to_uart_omap_port()   Felipe Balbi
• [PATCH v3 02/23] serial: omap: define helpers for pdata function pointers   Felipe Balbi
• [PATCH v3 03/23] serial: omap: don't access the platform_device   Felipe Balbi
• [PATCH v3 04/23] serial: omap: drop DMA support   Felipe Balbi
• [PATCH v3 05/23] serial: add OMAP-specific defines   Felipe Balbi
• [PATCH v3 06/23] serial: omap: simplify IRQ handling   Felipe Balbi
• [PATCH v3 07/23] serial: omap: refactor receive_chars() into rdi/rlsi handlers   Felipe Balbi
• [PATCH v3 08/23] serial: omap: move THRE check to transmit_chars()   Felipe Balbi
• [PATCH v3 09/23] serial: omap: stick to put_autosuspend   Felipe Balbi
• [PATCH v3 10/23] serial: omap: set dev->drvdata before enabling pm_runtime   Felipe Balbi
• [PATCH v3 11/23] serial: omap: drop unnecessary check from remove   Felipe Balbi
• [PATCH v3 12/23] serial: omap: make sure to suspend device before remove   Felipe Balbi
• [PATCH v3 13/23] serial: omap: don't save IRQ flags on hardirq   Felipe Balbi
• [PATCH v3 14/23] serial: omap: fix sequence of pm_runtime_* calls.   Felipe Balbi
• [PATCH v3 15/23] serial: omap: optimization with section annotations   Felipe Balbi
• [PATCH v3 16/23] serial: omap: drop "inline" from IRQ handler prototype   Felipe Balbi
• [PATCH v3 17/23] serial: omap: unlock the port lock   Felipe Balbi
• [PATCH v3 18/23] serial: omap: implement set_wake   Felipe Balbi
• [PATCH v3 19/23] serial: omap: make sure to put() on poll_get_char   Felipe Balbi
• [PATCH v3 20/23] serial: omap: fix software flow control   Felipe Balbi
• [PATCH v3 21/23] serial: omap: remove unnecessary header and add a missing one   Felipe Balbi
• [PATCH v3 22/23] serial: omap: move uart_omap_port definition to C file   Felipe Balbi
• [PATCH v3 23/23] serial: omap: enable RX and TX FIFO usage   Felipe Balbi
• [PATCH] MMC: OMAP MSDI: fix broken PIO mode   Felipe Balbi
• [PATCH v3 00/23] OMAP UART patches   Felipe Balbi
• [PATCH] usb: tegra: moving phy driver into drivers directory   Felipe Balbi
• [PATCH v3 2/9] MMC: pxa-mci: add DT bindings   Chris Ball
• [PATCH] mmc: atmel-mci: not busy flag has also to be used for read operations   Chris Ball
• [PATCH RESEND v5 0/4] atmel-mci device tree support   Chris Ball
• [PATCH 00/10 V3] MXS SPI driver   Chris Ball
• [PATCH] ARM: dts: imx51-babbage: fix esdhc cd/wp properties   Chris Ball
• [PATCH] mxs/spi: Fix misuse of init_completion   Chris Ball
• [PATCH V2] mxs/spi: Fix misuse of init_completion   Chris Ball
• [PATCH] mmc: tegra: convert to device tree support only   Chris Ball
• [PATCH] MMC: OMAP MSDI: fix broken PIO mode   Chris Ball
• [PATCH 9/9] ARM: OMAP: remove plat/board.h file   Chris Ball
• [PATCH 1/2] mmc: mxs-mmc: fix deadlock in SDIO IRQ case   Chris Ball
• [PATCH 2/2] mmc: mxs-mmc: fix deadlock caused by recursion loop   Chris Ball
• [PATCH] imx21ads : avoid overlapping static i/o mappings   Jaccon Bastiaansen
• [PATCH] cs89x0 : packet reception not working   Jaccon Bastiaansen
• [PATCH v2] cs89x0 : packet reception not working   Jaccon Bastiaansen
• [linux-pm] [PATCH v4 2/4] mfd: omap: control: core system control driver   Konstantin Baydarov
• [linux-pm] [PATCH v4 2/4] mfd: omap: control: core system control driver   Konstantin Baydarov
• [PATCH] i2c: omap: switch over to autosuspend API   Bedia, Vaibhav
• [PATCH v3] i2c: omap: switch over to autosuspend API   Bedia, Vaibhav
• [PATCH 1/1] ARM: OMAP2+: hwmod: Print an error message if no match exists for a hwmod class   Vaibhav Bedia
• [PATCH 1/1] ARM: OMAP2+: hwmod: Print an error message if no match exists for a hwmod class   Bedia, Vaibhav
• [PATCH 1/1] ARM: OMAP2+: hwmod: Print an error message if no match exists for a hwmod class   Bedia, Vaibhav
• [PATCH 1/1] ARM: OMAP2+: hwmod: Print an error message if no match exists for a hwmod class   Bedia, Vaibhav
• [RFC] ARM: SAMSUNG: Remove redundant return code from xxx_register_clock   Tushar Behera
• [PATCH 0/2] ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE   Tushar Behera
• [PATCH 1/2] ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE   Tushar Behera
• [PATCH 2/2] DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE   Tushar Behera
• [PATCH] ARM: EXYNOS: Add clocks for EXYNOS Audio Subsystem.   Tushar Behera
• [PATCH] ARM: imx6q-sabrelite: Setup CLKO IOMUX   Dirk Behme
• [PATCH v2 3/3] ARM: imx_v6_v7_defconfig: Select MXS_DMA   Dirk Behme
• [PATCH] mtd: mxc_nand: Fix compiler warnings   Dirk Behme
• [PATCH v2 2/3] mtd: nand: Let MTD_NAND_GPMI_NAND depend on MXS_DMA   Dirk Behme
• [PATCH] mtd: mxc_nand: Fix compiler warnings   Dirk Behme
• [PATCH 1/4] gpio/mxc: remove redundant shadow variables initialization   Dirk Behme
• imx6q restart is broken   Dirk Behme
• [PATCH 6/6] ARM: imx: gpmi-nand depends on mxs-dma   Dirk Behme
• [PATCH 6/6] ARM: imx: gpmi-nand depends on mxs-dma   Dirk Behme
• [PATCH] ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support   Dirk Behme
• [PATCH] mtd: mxc_nand: Fix compiler warnings   Dirk Behme
• [PATCH] ARM: imx6q: remove imx_src_prepare_restart() call   Dirk Behme
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Dirk Behme
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Dirk Behme
• [PATCH 0/2] tty: serial: imx: fix lockup and garbage on SMP   Dirk Behme
• [PATCH 1/2] tty: serial: imx: console write routing is unsafe on SMP   Dirk Behme
• [PATCH 2/2] tty: serial: imx: don't reinit clock with enabled console   Dirk Behme
• [PATCH 0/2] tty: serial: imx: fix lockup and garbage on SMP   Dirk Behme
• [PATCH 2/2] tty: serial: imx: don't reinit clock with enabled console   Dirk Behme
• [PATCH v2 2/2] tty: serial: imx: don't reinit clock in imx_setup_ufcr()   Dirk Behme
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Dirk Behme
• About dma_sync_single_for_{cpu,device}   Karl Beldan
• [PATCH 1/1] remoteproc: extend customized fw loader to cover request and release   Ohad Ben-Cohen
• [PATCH 1/1] remoteproc: extend customized fw loader to cover request and release   Ohad Ben-Cohen
• [PATCH 5/6] ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled   Arnd Bergmann
• [PATCH 5/6] ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled   Arnd Bergmann
• [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Arnd Bergmann
• [RFC 20/22] ARM: keystone: introducing TI Keystone platform   Arnd Bergmann
• [PATCH 2/5] clk: mmp: add clock definition for pxa168   Arnd Bergmann
• [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Arnd Bergmann
• am33xx: default to status = "disabled"?   Arnd Bergmann
• [PATCH 2/4] arm: plat-orion: make bridge_virt_base non-const to support DT use case   Arnd Bergmann
• [PATCH v6 0/3] Updated Cortex-M3 series   Arnd Bergmann
• arm: mvebu: Add basic address decoding support for Marvell 370/XP   Arnd Bergmann
• [PATCH 4/5] arm: mvebu: add basic address decoding support to Armada 370/XP   Arnd Bergmann
• arm: mvebu: Add basic address decoding support for Marvell 370/XP   Arnd Bergmann
• [PATCH v3 4/9] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Arnd Bergmann
• [PATCH] arm: add documentation describing Marvell families of SoC   Arnd Bergmann
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Arnd Bergmann
• [PATCH 1/2] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Arnd Bergmann
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   Arnd Bergmann
• [PATCH 2/6] mfd: Provide the PRCMU with its own IRQ domain   Arnd Bergmann
• [PATCH 0/6] ARM: dove: DT support for Marvell Dove   Arnd Bergmann
• [PATCH 0/6] ARM: dove: DT support for Marvell Dove   Arnd Bergmann
• [PATCH] arm: add documentation describing Marvell families of SoC   Arnd Bergmann
• [PATCH v2 0/5] Use more asm-generic headers   Arnd Bergmann
• [PATCH] ARM: integrator: use clk_prepare_enable() for timer   Arnd Bergmann
• [PATCH 1/3] dmaengine: mmp-pdma support   Arnd Bergmann
• [GIT PULL][for 3.7] pull request from board branch in pxa git tree   Arnd Bergmann
• [GIT PULL] imx fixes for 3.6   Arnd Bergmann
• [GIT PULL] mxs fixes for 3.6   Arnd Bergmann
• [PATCH] ARM: integrator: use clk_prepare_enable() for timer   Arnd Bergmann
• [PATCH] arm/dts: omap5: Add mmc controller nodes and board data   Arnd Bergmann
• [PATCH 1/1] ARM: kirkwood: fix typo in Makefile.boot   Arnd Bergmann
• [GIT PULL] i.MX fixes for 3.6-rc   Arnd Bergmann
• [PATCH V4 1/2] include/video: move fimd register headers from platform to include/video   Arnd Bergmann
• [PATCH v3 3/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH V4 1/2] include/video: move fimd register headers from platform to include/video   Arnd Bergmann
• [PATCH 1/6] ARM: mxs: tx28: reset fec phy for device tree boot   Arnd Bergmann
• [PATCH 0/6] ARM: mxs: remove board files   Arnd Bergmann
• [PATCH 2/4] arm/dts: exynos4: Add DTS files derived from common Exynos4   Arnd Bergmann
• [PATCH v3 3/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• 회신: [PATCH 2/4] arm/dts: exynos4: Add DTS files derived from common Exynos4   Arnd Bergmann
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Arnd Bergmann
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Arnd Bergmann
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH 0/6] ARM: defconfig build errors   Arnd Bergmann
• [PATCH 1/6] ARM: pxa: remove irq_to_gpio from ezx-pcap driver   Arnd Bergmann
• [PATCH 2/6] ARM: pxa remove irq_to_gpio from eeti_ts driver   Arnd Bergmann
• [PATCH 3/6] ARM: sa1100: include asm/io.h in hackkit leds code   Arnd Bergmann
• [PATCH 4/6] ARM: s3c24xx: use new PWM driver   Arnd Bergmann
• [PATCH 5/6] ARM: integrator: include <linux/export.h   Arnd Bergmann
• [PATCH 6/6] ARM: imx: gpmi-nand depends on mxs-dma   Arnd Bergmann
• [PATCH 5/6] ARM: integrator: include <linux/export.h   Arnd Bergmann
• [PATCH 2/6] ARM: pxa remove irq_to_gpio from eeti_ts driver   Arnd Bergmann
• [PATCH 4/6] ARM: s3c24xx: use new PWM driver   Arnd Bergmann
• [PATCH 2/6] ARM: pxa remove irq_to_gpio from eeti_ts driver   Arnd Bergmann
• [PATCH 00/11] recently added ARM defconfig warnings   Arnd Bergmann
• [PATCH 01/11] ARM: topology: mark init_cpu_topology as __init   Arnd Bergmann
• [PATCH 02/11] mfd/asic3: fix asic3_mfd_probe return value   Arnd Bergmann
• [PATCH 03/11] usb/ohci-omap: remove unused variable   Arnd Bergmann
• [PATCH 04/11] ARM: ux500: really kill snowball_of_platform_devs   Arnd Bergmann
• [PATCH 05/11] ARM: exynos: exynos_pm_add_dev_to_genpd may be unused   Arnd Bergmann
• [PATCH 06/11] gpio: em: do not discard em_gio_irq_domain_cleanup   Arnd Bergmann
• [PATCH 07/11] net/stmmac: mark probe function as __devinit   Arnd Bergmann
• [PATCH 08/11] mtd/omap2: fix dmaengine_slave_config error handling   Arnd Bergmann
• [PATCH 09/11] regulator/twl: remove fixed resource handling   Arnd Bergmann
• [PATCH 10/11] spi/s3c64xx: improve error handling   Arnd Bergmann
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Arnd Bergmann
• [PATCH 09/11] regulator/twl: remove fixed resource handling   Arnd Bergmann
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Arnd Bergmann
• [PATCH 3/6] ARM: sa1100: include asm/io.h in hackkit leds code   Arnd Bergmann
• [PATCH 04/11] ARM: ux500: really kill snowball_of_platform_devs   Arnd Bergmann
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Arnd Bergmann
• [PATCH 01/11] ARM: topology: mark init_cpu_topology as __init   Arnd Bergmann
• [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Arnd Bergmann
• [PATCH 00/10] ARM: interesting warnings from defconfig builds   Arnd Bergmann
• [PATCH 01/10] ARM: footbridge: nw_gpio_lock is raw_spin_lock   Arnd Bergmann
• [PATCH 02/10] ARM: ks8695: __arch_virt_to_dma type handling   Arnd Bergmann
• [PATCH 03/10] ARM: mv78xx0: fix win_cfg_base prototype   Arnd Bergmann
• [PATCH 04/10] ARM: pass -marm to gcc by default   Arnd Bergmann
• [PATCH 05/10] asm-generic: xor: mark static functions as __maybe_unused   Arnd Bergmann
• [PATCH 06/10] ARM: davinci: don't use broken ntosd2_init_i2c   Arnd Bergmann
• [PATCH 07/10] ARM: rpc: check device_register return code in ecard_probe   Arnd Bergmann
• [PATCH 08/10] ARM: s3c24xx: enable CONFIG_BUG for tct_hammer   Arnd Bergmann
• [PATCH 09/10] ARM: rpc: Fix building RiscPC   Arnd Bergmann
• [PATCH 10/10] leds: renesas: fix error handling   Arnd Bergmann
• [PATCH 10/10] leds: renesas: fix error handling   Arnd Bergmann
• [PATCH v2 06/10] ARM: davinci: don't use broken ntosd2_init_i2c   Arnd Bergmann
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• How to get the irq flags from the dts file   Arnd Bergmann
• [PATCH] ARM: tegra: more regulator fixes for Harmony   Arnd Bergmann
• [PATCH 10/11] spi/s3c64xx: improve error handling   Arnd Bergmann
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH 09/10] ARM: rpc: Fix building RiscPC   Arnd Bergmann
• [PATCH 04/10] ARM: pass -marm to gcc by default   Arnd Bergmann
• [PATCH 06/11] gpio: em: do not discard em_gio_irq_domain_cleanup   Arnd Bergmann
• [GIT PULL 0/3] arm-soc updates   Arnd Bergmann
• [GIT PULL 2/3] arm-soc: late at91 changes   Arnd Bergmann
• [GIT PULL 1/3] arm-soc: bug fixes for v3.6-rc2   Arnd Bergmann
• [GIT PULL 3/3] arm-soc: make of_device_id->data constant   Arnd Bergmann
• [PATCH v2 1/4] dmaengine: mmp-pdma support   Arnd Bergmann
• [GIT PULL] arm: documentation   Arnd Bergmann
• [PATCH v10 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Arnd Bergmann
• [PATCH v3 1/4] dmaengine: mmp-pdma support   Arnd Bergmann
• [PATCH v3 2/4] dmaengine: mmp_tdma: add dt support   Arnd Bergmann
• [GIT PULL] io.h clean-up for PCI   Arnd Bergmann
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Arnd Bergmann
• [GIT PULL] Ux500 ASIC ID patches   Arnd Bergmann
• [GIT PULL] omap fixes for v3.6-rc1   Arnd Bergmann
• [GIT PULL] orion/kirkwood fixes for v3.6   Arnd Bergmann
• [GIT PULL] U300 cleanups and sparseirq   Arnd Bergmann
• [GIT PULL] U300 cleanups and sparseirq   Arnd Bergmann
• [PATCH v2 01/31] arm64: Assembly macros and definitions   Arnd Bergmann
• [PATCH v2 03/31] arm64: Exception handling   Arnd Bergmann
• [PATCH v2 15/31] arm64: SMP support   Arnd Bergmann
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Arnd Bergmann
• [PATCH v2 04/31] arm64: MMU definitions   Arnd Bergmann
• [GIT PULL] orion/kirkwood fixes for v3.6   Arnd Bergmann
• [PATCH v2 05/31] arm64: MMU initialisation   Arnd Bergmann
• [PATCH v2 06/31] arm64: MMU fault handling and page table management   Arnd Bergmann
• [PATCH v2 07/31] arm64: Process management   Arnd Bergmann
• [PATCH v2 08/31] arm64: CPU support   Arnd Bergmann
• [PATCH v2 16/31] arm64: ELF definitions   Arnd Bergmann
• [PATCH v2 17/31] arm64: System calls handling   Arnd Bergmann
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Arnd Bergmann
• [PATCH v2 22/31] arm64: Floating point and SIMD   Arnd Bergmann
• [PATCH v2 20/31] arm64: User access library function   Arnd Bergmann
• [PATCH v2 23/31] arm64: Debugging support   Arnd Bergmann
• [PATCH v2 24/31] arm64: Add support for /proc/sys/debug/exception-trace   Arnd Bergmann
• [PATCH v2 25/31] arm64: Performance counters support   Arnd Bergmann
• [PATCH v2 26/31] arm64: Miscellaneous library functions   Arnd Bergmann
• [PATCH v2 27/31] arm64: Loadable modules   Arnd Bergmann
• [PATCH v2 28/31] arm64: Generic timers support   Arnd Bergmann
• [PATCH v2 29/31] arm64: Miscellaneous header files   Arnd Bergmann
• [PATCH v2 31/31] arm64: MAINTAINERS update   Arnd Bergmann
• [PATCH v2 30/31] arm64: Build infrastructure   Arnd Bergmann
• [PATCH v2 13/31] arm64: Device specific operations   Arnd Bergmann
• [PATCH v2 14/31] arm64: DMA mapping API   Arnd Bergmann
• [PATCH v2 27/31] arm64: Loadable modules   Arnd Bergmann
• [GIT PULL V2] orion/kirkwood fixes for v3.6   Arnd Bergmann
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH V3 3/5] clk: mmp: add clock definition for pxa910   Arnd Bergmann
• [PATCH V3 1/5] clk: mmp: add mmp specific clocks   Arnd Bergmann
• [PATCH V3 3/5] clk: mmp: add clock definition for pxa910   Arnd Bergmann
• [GIT PULL][for 3.6] pull request from fixes branch in pxa git tree   Arnd Bergmann
• [PATCH] dma: amba-pl08x: Export pl08x_filter_id   Arnd Bergmann
• [GIT PULL][for 3.7] pull request from dt branch in pxa git tree   Arnd Bergmann
• [PATCH] dma: amba-pl08x: Export pl08x_filter_id   Arnd Bergmann
• [PATCH v2 03/31] arm64: Exception handling   Arnd Bergmann
• [PATCH v2 16/31] arm64: ELF definitions   Arnd Bergmann
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Arnd Bergmann
• [PATCH v2 23/31] arm64: Debugging support   Arnd Bergmann
• [PATCH v2 26/31] arm64: Miscellaneous library functions   Arnd Bergmann
• [PATCH 0/6] Integrator devicetree support   Arnd Bergmann
• [PATCH 1/6] ARM: integrator: call common init function from machine   Arnd Bergmann
• [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller   Arnd Bergmann
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Arnd Bergmann
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Arnd Bergmann
• [PATCH v2 23/31] arm64: Debugging support   Arnd Bergmann
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Arnd Bergmann
• [PATCH V4 1/5] clk: mmp: add mmp specific clocks   Arnd Bergmann
• [PATCH V4 5/5] arm: mmp: make all SOCs use common clock by default   Arnd Bergmann
• [PATCH V4 2/5] clk: mmp: add clock definition for pxa168   Arnd Bergmann
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Arnd Bergmann
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH V4 2/5] clk: mmp: add clock definition for pxa168   Arnd Bergmann
• [PATCH 01/11] ARM: defconfig: Remove CONFIG_MISC_DEVICES   Arnd Bergmann
• [PATCH 02/14] at91: regroup gpio and pinctrl under a simple-bus   Arnd Bergmann
• [PATCH 03/14] arm: at91: at91sam9x5: fix gpio number per bank   Arnd Bergmann
• [PATCH 0/6] Integrator devicetree support   Arnd Bergmann
• [v3] Add basic address decoding support for Marvell 370/XP   Arnd Bergmann
• [PATCH 0/3] New algorithm for ASID allocation and rollover   Arnd Bergmann
• [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Arnd Bergmann
• [GIT PULL][for 3.7] pull request for pxa/dt branch in arm-soc from arch-pxa git tree   Arnd Bergmann
• [GIT PULL] arm-soc: bug fixes for v3.6-rc3   Arnd Bergmann
• [PATCH RESEND 1/2] i2c: pnx: Fix bit definitions   Arnd Bergmann
• [PATCH] ARM: relax conditions required for enabling Contiguous Memory Allocator   Arnd Bergmann
• [PATCH 0/4] Per device coherent DMA map ops   Arnd Bergmann
• [PATCH v2 23/31] arm64: Debugging support   Arnd Bergmann
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Arnd Bergmann
• [PATCH v2 08/31] arm64: CPU support   Arnd Bergmann
• [PATCH 1/3] ARM: PRIMA2: use DT_MACHINE_START and convert to generic board   Arnd Bergmann
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Arnd Bergmann
• [PATCH 1/3] ARM: PRIMA2: use DT_MACHINE_START and convert to generic board   Arnd Bergmann
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Arnd Bergmann
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Arnd Bergmann
• [PATCH 1/3] ARM: PRIMA2: use DT_MACHINE_START and convert to generic board   Arnd Bergmann
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Arnd Bergmann
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Arnd Bergmann
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Arnd Bergmann
• [RFC 1/4] ARM: autogenerate mach-foo/* and plat-foo/* header redirects   Arnd Bergmann
• [RFC 3/4] ARM: treewide: scripted conversion to mach-*/*.h   Arnd Bergmann
• [RFC 4/4] ARM: treewide: manually change more mach-*/*.h includes   Arnd Bergmann
• [RFC 0/4] ARM: multiplatform: rename all mach headers   Arnd Bergmann
• [RFC 2/4] ARM: mass move of mach-*/plat-* header files   Arnd Bergmann
• [PATCH v2] ARM: io: avoid writeback addressing modes for __raw_ accessors   Arnd Bergmann
• [RFC 1/4] ARM: autogenerate mach-foo/* and plat-foo/* header redirects   Arnd Bergmann
• [RFC 4/4] ARM: treewide: manually change more mach-*/*.h includes   Arnd Bergmann
• [RFC 2/4] ARM: mass move of mach-*/plat-* header files   Arnd Bergmann
• [RFC 0/4] ARM: multiplatform: rename all mach headers   Arnd Bergmann
• [RFC 3/4] ARM: treewide: scripted conversion to mach-*/*.h   Arnd Bergmann
• [RFC 1/4] ARM: autogenerate mach-foo/* and plat-foo/* header redirects   Arnd Bergmann
• [PATCH 1/4] ARM: clps711x: Remove board support for CEIVA   Arnd Bergmann
• [PATCH v2 17/31] arm64: System calls handling   Arnd Bergmann
• [PATCH v2 16/31] arm64: ELF definitions   Arnd Bergmann
• FW: [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Arnd Bergmann
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for   Arnd Bergmann
• [PATCH v2 17/31] arm64: System calls handling   Arnd Bergmann
• [PATCH v2 17/31] arm64: System calls handling   Arnd Bergmann
• [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver   Arnd Bergmann
• [PATCH 0/4] [RFC] ARM: multiplatform: rename all mach headers   Arnd Bergmann
• [PATCH 1/4] [RFC] ARM: autogenerate mach-foo/* and plat-foo/* header redirects   Arnd Bergmann
• [PATCH 2/4] [RFC] ARM: mass move of mach-*/plat-* header files   Arnd Bergmann
• [PATCH 3/4] [RFC] ARM: multiplatform: rename all mach headers   Arnd Bergmann
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Arnd Bergmann
• [PATCH 0/4] ARM: patches for randconfig build errors   Arnd Bergmann
• [PATCH 1/4] ARM: export read_current_timer   Arnd Bergmann
• [PATCH 2/4] ARM: allow PID_IN_CONTEXTIDR only for ARMv7   Arnd Bergmann
• [PATCH 3/4] ARM: export set_irq_flags/irq_set_chip_and_handler   Arnd Bergmann
• [PATCH 4/4] ARM: kprobes: make more tests conditional   Arnd Bergmann
• [PATCH 2/4] ARM: allow PID_IN_CONTEXTIDR only for ARMv7   Arnd Bergmann
• [PATCH 0/6] ARM: randconfig bugs   Arnd Bergmann
• [PATCH 1/6] ARM: ux500: don't select LEDS_GPIO for snowball   Arnd Bergmann
• [PATCH 2/6] ARM: omap: allow building omap44xx without SMP   Arnd Bergmann
• [PATCH 3/6] ARM: imx: build pm-imx5 code only when PM is enabled   Arnd Bergmann
• [PATCH 4/6] ARM: imx: fix ksz9021rn_phy_fixup   Arnd Bergmann
• [PATCH 5/6] ARM: imx: select CPU_FREQ_TABLE when needed   Arnd Bergmann
• [PATCH 6/6] ARM: imx: select ARM_CPU_SUSPEND when necessary   Arnd Bergmann
• [PATCH 4/4] ARM: kprobes: make more tests conditional   Arnd Bergmann
• [PATCH 0/4] [RFC] ARM: multiplatform: rename all mach headers   Arnd Bergmann
• [PATCH 2/4] [RFC] ARM: mass move of mach-*/plat-* header files   Arnd Bergmann
• [PATCH 2/6] ARM: omap: allow building omap44xx without SMP   Arnd Bergmann
• [PATCHv3 4/4] ARM: kprobes: make more tests conditional   Arnd Bergmann
• [PATCH 0/4] [RFC] ARM: multiplatform: rename all mach headers   Arnd Bergmann
• PER_LINUX32, Was: [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Arnd Bergmann
• [PATCH v2 0/3] ARM: PRIMA2: some patches prepared to support new SiRF SoCs   Arnd Bergmann
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Arnd Bergmann
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Arnd Bergmann
• [PATCHv4 4/4] ARM: kprobes: make more tests conditional   Arnd Bergmann
• [PATCH 2/6] ARM: omap: allow building omap44xx without SMP   Arnd Bergmann
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Arnd Bergmann
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Arnd Bergmann
• [PATCH] atmel-ssc: include linux/io.h for raw io   Arnd Bergmann
• [PATCH 2/6] ARM: omap: allow building omap44xx without SMP   Arnd Bergmann
• [PATCH 6/6] ARM: imx: select ARM_CPU_SUSPEND when necessary   Arnd Bergmann
• [PATCH 1/6] ARM: ux500: don't select LEDS_GPIO for snowball   Arnd Bergmann
• [GIT PULL] Samsung fixes for v3.6   Arnd Bergmann
• [GIT PULL] imx fixes for 3.6 (take 2)   Arnd Bergmann
• [GIT PULL] ux500 fixes   Arnd Bergmann
• [GIT PULL] arm-soc fixes for v3.6-rc3   Arnd Bergmann
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Arnd Bergmann
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Arnd Bergmann
• [GIT PULL] ARM: mach-pnx4008: Remove architecture   Arnd Bergmann
• [PATCH 1/4] clk: ux500: Adapt PRCMU and PRCC clocks for common clk   Arnd Bergmann
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Arnd Bergmann
• [PATCH] video: Remove pnx4008 driver   Arnd Bergmann
• Boot v3.5 kernel on QEMU for vexpress-a15 architecture with cpu as cortex-a15   Naresh Bhat
• Boot v3.5 kernel on QEMU for vexpress-a15 architecture with cpu as cortex-a15   Naresh Bhat
• [PATCH] arm:gemini: fix irq.c   Andreas Bießmann
• [PATCH v2] mtd: gpmi: add NAND write verify support   Artem Bityutskiy
• [PATCH v2] mtd: gpmi: add NAND write verify support   Artem Bityutskiy
• [PATCH 6/6] ARM: imx: gpmi-nand depends on mxs-dma   Artem Bityutskiy
• [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes   Artem Bityutskiy
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Artem Bityutskiy
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Artem Bityutskiy
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Artem Bityutskiy
• [PATCH 1/1 v2] MTD: atmel nand: fix gpio missing request   Artem Bityutskiy
• [PATCH v2 1/3] mtd: nand: Include IMX6 in the list of supported SoCs   Artem Bityutskiy
• [PATCH 2/8] UBI: separate bad_peb_limit in a function   Artem Bityutskiy
• [PATCH 1/8] arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit   Artem Bityutskiy
• [PATCH 1/8] arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit   Artem Bityutskiy
• [PATCH 3/8] UBI: introduce MTD_PARAM_MAX_COUNT   Artem Bityutskiy
• [PATCH 3/8] UBI: introduce MTD_PARAM_MAX_COUNT   Artem Bityutskiy
• [PATCH 5/8] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev   Artem Bityutskiy
• [PATCH 5/8] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev   Artem Bityutskiy
• JFFS2 issue with v3.5.x and later on Atmel chips at least (was: Kernel oops since v3.5.x on Atmel chips)   Artem Bityutskiy
• JFFS2 issue with v3.5.x and later on Atmel chips at least (was: Kernel oops since v3.5.x on Atmel chips)   Artem Bityutskiy
• JFFS2 issue with v3.5.x and later on Atmel chips at least   Artem Bityutskiy
• [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Artem Bityutskiy
• [PATCH v3] mtd: gpmi: fix the compiler warnings   Artem Bityutskiy
• [PATCH] mtd: use %*ph[CN] to dump small buffers   Artem Bityutskiy
• [PATCH 14/14] MTD: atmel_nand: add pinctrl consumer support   Artem Bityutskiy
• [PATCH v2] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Artem Bityutskiy
• [PATCH] mtd: kill MTD_NAND_VERIFY_WRITE   Artem Bityutskiy
• [PATCH] kconfig: remove CONFIG_MTD_NAND_VERIFY_WRITE   Artem Bityutskiy
• [PATCH v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property   Artem Bityutskiy
• [PATCH RESEND] mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driver   Artem Bityutskiy
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Artem Bityutskiy
• [PATCH] mtd: orion_nand: remove <mach/hardware.h> include   Artem Bityutskiy
• [PATCH resend] i.MX53 Nand support   Artem Bityutskiy
• [PATCH] ARM: Fix XIP build due to PHYS_OFFSET definition moving   Stephen Boyd
• [PATCH] ARM: Don't enable GENERIC_LOCKBREAK with ticket spinlocks   Stephen Boyd
• [PATCH/TRIVIAL] ARM: Drop duplicate select for GENERIC_IRQ_PROBE   Stephen Boyd
• [PATCH 01/11] ARM: topology: mark init_cpu_topology as __init   Stephen Boyd
• [PATCH] ARM: Fix XIP build due to PHYS_OFFSET definition moving   Stephen Boyd
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Stephen Boyd
• [RFC/PATCH] ARM: smp: Fix cpu_up() racing with sys_reboot   Stephen Boyd
• [PATCH 1/4] ARM: export read_current_timer   Stephen Boyd
• [PATCH 1/4] ARM: export read_current_timer   Stephen Boyd
• [PATCHv2] ARM: Sort exception table at compile time   Stephen Boyd
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Stephen Boyd
• [PATCH] ARM: Fix XIP build due to PHYS_OFFSET definition moving   Stephen Boyd
• [PATCH 0/3] Miscellaneous MSM fixes   Stephen Boyd
• [PATCH 1/3] ARM: MSM: Remove msm_hw_reset_hook   Stephen Boyd
• [PATCH 2/3] ARM: MSM: clock-pcom: Mark functions static   Stephen Boyd
• [PATCH 3/3] ARM: MSM: Remove unused idle.c   Stephen Boyd
• [PATCH 0/2] 8660 DT fixlets   Stephen Boyd
• [PATCH 1/2] ARM: MSM: Add handle_irq handler for 8660 DT machine   Stephen Boyd
• [PATCH 2/2] ARM: MSM: Add msm8660-surf.dts to Makefile.boot   Stephen Boyd
• [PATCH] ARM: MSM: Implement read_current_timer for msm timers   Stephen Boyd
• [PATCH] ARM: MSM: Fix early debug uart mapping on some memory configs   Stephen Boyd
• [PATCH] ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs'   Stephen Boyd
• [PATCH] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Stephen Boyd
• [PATCH] ARM: Build dtb files in all target   Stephen Boyd
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Stephen Boyd
• [RFC/PATCH] ARM: smp: Fix cpu_up() racing with sys_reboot   Stephen Boyd
• [RFC/PATCH] ARM: smp: Fix cpu_up() racing with sys_reboot   Stephen Boyd
• [PATCH v3 1/2] ARM: arch_timers: enable the use of the virtual timer   Stephen Boyd
• [PATCH v2 1/2] ARM: delay: set loops_per_jiffy when moving to timer-based loop   Stephen Boyd
• [PATCH v2 2/2] ARM: delay: add registration mechanism for delay timer sources   Stephen Boyd
• [PATCHv2] ARM: msm: Implement read_current_timer for msm timers   Stephen Boyd
• [PATCH v2] hvc_dcc : add support to armv4 and armv5 core   Stephen Boyd
• [RFC][PATCH] Disintegrate sharpsl_param.c   Stanislav Brabec
• How to debug hard lockup issue   Jassi Brar
• How to debug hard lockup issue   Jassi Brar
• [PATCH 2/2] msm: io: Change the default static iomappings to be shared   David Brown
• Preliminary topic proposals for the ARM mini-summit   David Brown
• [GIT PULL] msm fixes for v3.6   David Brown
• [PATCH] ARM: Make sure dtc is built before running it   David Brown
• [RFC PATCH 1/1] ASoC: soc-dapm: warn if no avaiable path found for widget kcontrol   Mark Brown
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Mark Brown
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Mark Brown
• [alsa-devel] [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Mark Brown
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Mark Brown
• [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver   Mark Brown
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Mark Brown
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Mark Brown
• [alsa-devel] [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Mark Brown
• [alsa-devel] [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Mark Brown
• [PATCH 2/2] SPI: Refactor spi-orion to use SPI framework queue.   Mark Brown
• [PATCH] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Mark Brown
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Mark Brown
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Mark Brown
• [PATCH 4/6] mfd: Use interrupt-parent as IRQ controller if specified in DT   Mark Brown
• [PATCH 6/6] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Mark Brown
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Mark Brown
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Mark Brown
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Mark Brown
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Mark Brown
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Mark Brown
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Mark Brown
• [PATCH 1/4] arm/dts: max77686: Add DTS file for max77686 PMIC   Mark Brown
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Mark Brown
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Mark Brown
• [PATCH 00/11] ARM/ASoC: OMAP McBSP device tree support   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Mark Brown
• [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030   Mark Brown
• ȸ��: [PATCH 1/4] arm/dts: max77686: Add DTS file for max77686 PMIC   Mark Brown
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 09/11] regulator/twl: remove fixed resource handling   Mark Brown
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Mark Brown
• How to get the irq flags from the dts file   Mark Brown
• [PATCH] ASoC: Davinci: McASP: remove unused header include   Mark Brown
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Mark Brown
• The curse of EPROBE_DEFER   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Mark Brown
• [PATCH 2/2] ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore   Mark Brown
• [PATCH 00/22] mop500 related Audio reorganisation and fixups   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Mark Brown
• Lockups reading from i.MX51 SSI registers   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Mark Brown
• [PATCH 00/10 V3] MXS SPI driver   Mark Brown
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Mark Brown
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   Mark Brown
• [PATCH 03/22] ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements   Mark Brown
• [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030   Mark Brown
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   Mark Brown
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   Mark Brown
• [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support   Mark Brown
• [PATCH 00/10 V3] MXS SPI driver   Mark Brown
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Mark Brown
• [PATCH 3/5] ASoC: Davinci: pcm: Add device tree bindings   Mark Brown
• [PATCH 1/5] ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific   Mark Brown
• [PATCH 2/5] ASoC: Davinci: McASP: add device tree support for McASP   Mark Brown
• [PATCH 4/5] ASoC: Davinci: machine: Add device tree binding   Mark Brown
• [PATCH 5/5] ASoC: tlv320aic3x: Add device tree bindings   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Mark Brown
• [PATCH 1/1] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [PATCH 1/1] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH 1/1] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH v3 0/4] Add AM33XX regulators device tree data   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [2/3][PATCH][v2] TDM Framework   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Mark Brown
• [PATCH v3 1/4] arm/dts: regulator: Add tps65910 device tree data   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [PATCH v3 1/4] arm/dts: regulator: Add tps65910 device tree data   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [PATCH 14/14] drivers/spi/spi-s3c24xx.c: fix error return code   Mark Brown
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Mark Brown
• [PATCH 3/5] ASoC: Davinci: pcm: Add device tree bindings   Mark Brown
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Mark Brown
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Mark Brown
• [PATCH 14/14] drivers/spi/spi-s3c24xx.c: fix error return code   Mark Brown
• [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Mark Brown
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Mark Brown
• [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Mark Brown
• [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Mark Brown
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Mark Brown
• [PATCH v3 6/9] ASoC: omap-mcbsp: Remove unused defines   Mark Brown
• [PATCH v3 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Mark Brown
• [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Mark Brown
• [PATCH v3 9/9] ASoC: omap-mcbsp: Add device tree bindings   Mark Brown
• [PATCH] ASoC: omap-mcbsp: Device tree binding documentation update   Mark Brown
• [PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration   Mark Brown
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Mark Brown
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Mark Brown
• [PATCH] ARM: OMAP2+: twl-common: Fix compile time error when omap-twl4030 audio is not enabled   Mark Brown
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [PATCH] ARM: OMAP2+: twl-common: Fix compile time error when omap-twl4030 audio is not enabled   Mark Brown
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Mark Brown
• [PATCH] atmel-ssc: include linux/io.h for raw io   Mark Brown
• [PATCH] ASoC: atmel-ssc: include linux/io.h for raw io   Mark Brown
• [PATCH] ASoC: atmel-ssc: include linux/io.h for raw io   Mark Brown
• FW: [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Mark Brown
• [PATCH] mxs/spi: Restart the block after unsuccessful transfer   Mark Brown
• [PATCH V3] mxs/spi: Fix misuse of init_completion   Mark Brown
• [PATCH] mxs/spi: Add SPI slave mode operation DT prop   Mark Brown
• [PATCH v3 1/4] arm/dts: regulator: Add tps65910 device tree data   Mark Brown
• ASoC: SAMSUNG: Change Kconfig to support all EXYNOSs   Mark Brown
• [PATCH] spi/s3c64xx: Drop extra calls to spi_master_get in suspend/remove functions   Mark Brown
• [PATCH V2 6/6] ASoC: tlv320aic3x: Add device tree bindings   Mark Brown
• [PATCH V2 4/6] ASoC: Davinci: McASP: add device tree support for McASP   Mark Brown
• ASoC: SAMSUNG: Change Kconfig to support all EXYNOSs   Mark Brown
• [PATCH V2 1/6] ASoC: davinci: davinci-pcm does not need to be a plaform_driver   Mark Brown
• [PATCH V2 2/6] ARM: Davinci: Remove references to davinci pcm   Mark Brown
• [PATCH V2 3/6] ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific   Mark Brown
• [PATCH V2 4/6] ASoC: Davinci: McASP: add device tree support for McASP   Mark Brown
• [PATCH V2 5/6] ASoC: Davinci: machine: Add device tree binding   Mark Brown
• [PATCH] ASoC: SAMSUNG: Add SND_SOC_DAIFMT_CONT option for snd_soc_set_fmt()   Mark Brown
• [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Mark Brown
• [PATCH] MFD : MC13783 : add regulators sw1x and sw2x   Mark Brown
• [PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration   Mark Brown
• [RESUBMIT PATCH] ASoC: SAMSUNG: Change Kconfig to support all SAMSUNG ASoC   Mark Brown
• [PATCH RESEND 1/4] ARM: OMAP2+: AM33XX: Add tps65910 device tree data   Mark Brown
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH RESEND 1/4] ARM: OMAP2+: AM33XX: Add tps65910 device tree data   Mark Brown
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
• [PATCH] ASoC: SAMSUNG: Add SND_SOC_DAIFMT_CONT option for snd_soc_set_fmt()   Mark Brown
• [PATCH V3] ASoC: Davinci: machine: Add device tree binding   Mark Brown
• [PATCH] ASoC: samsung dma - Don't indicate support for pause/resume.   Mark Brown
• [PATCH 2/4] ARM: OMAP: Split plat/hardware.h, introduce local hardware.h and soc.h for omap2+   Mark Brown
• [PATCH 1/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Mark Brown
• [PATCH 3/3] ASoC: Davinci: evm: Fix typo in cpu dai name   Mark Brown
• [PATCH] ARM: ep93xx: clockevent support   Yan Burman
• [PATCH] ARM: ep93xx: Use HW MAC filter in ethernet driver   Yan Burman
• [PATCH] ARM: ep93xx: clockevent support   Yan Burman
• [PATCH v2] ARM: ep93xx: Use HW MAC filter in ethernet driver   Yan Burman
• [PATCH v2] ARM: ep93xx: clockevent support   Yan Burman
• [PATCH v3] ARM: ep93xx: Use HW MAC filter in ethernet driver   Yan Burman
• PATCH Add support for the Iomega IX2-200 Device Tree   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• Issues with all kernels after 3.3.7   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega_IX2_200 DT support Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega_IX2_200 DT support Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega ix2-200 DT support Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Alan M Butler
• [PATCH] usb: tegra: moving phy driver into drivers directory   Venu Byravarasu
• [PATCH] usb: tegra: moving phy driver into drivers directory   Venu Byravarasu
• [PATCH] usb: tegra: moving phy driver into drivers directory   Venu Byravarasu
• [PATCH] usb: tegra: moving phy driver into drivers directory   Venu Byravarasu
• [PATCH v2] usb: move phy driver from mach-tegra to drivers/usb   Venu Byravarasu
• [PATCH] dma: imx-dma: Fix kernel crash due to missing clock conversion   Eric Bénard
• mxc_nand.c on mach-imx/imx53   Eric Bénard
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Matthieu CASTET
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Matthieu CASTET
• [PATCH v2] hvc_dcc : add support to armv4 and armv5 core   Matthieu CASTET
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Matthieu CASTET
• [PATCH 1/4] arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option   Gregory CLEMENT
• [PATCH 2/4] arm: plat-orion: make bridge_virt_base non-const to support DT use case   Gregory CLEMENT
• [PATCH 3/4] arm: mvebu: add basic address decoding support to Armada 370/XP   Gregory CLEMENT
• [PATCH 4/4] arm: mvebu: add address decoding controller to the DT   Gregory CLEMENT
• [RFC] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [RFC 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [RFC 2/6] arm: cache-l2x0: add an optional register to save/restore   Gregory CLEMENT
• [RFC 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [RFC 4/6] arm: mvebu: add L2 cache support   Gregory CLEMENT
• [RFC 6/6] arm: l2x0: add aurora related properties to OF binding   Gregory CLEMENT
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [RFC] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• LPAE for outer caches functiopns (was Re: [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl)   Gregory CLEMENT
• [RFC 2 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• LPAE for outer caches functiopns (was Re: [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl)   Gregory CLEMENT
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Gregory CLEMENT
• [RFC] Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• Add support for Aurora L2 Cache Controller   Gregory CLEMENT
• [PATCH 1/6] arm: cache-l2x0: make outer_cache_fns a field of l2x0_of_data   Gregory CLEMENT
• [PATCH 2/6] arm: cache-l2x0: add an optional register to save/restore   Gregory CLEMENT
• [PATCH 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH 4/6] arm: mvebu: add L2 cache support   Gregory CLEMENT
• [PATCH 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [PATCH 6/6] arm: l2x0: add aurora related properties to OF binding   Gregory CLEMENT
• [PATCH 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [PATCH 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Gregory CLEMENT
• [PATCH 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Gregory CLEMENT
• [PATCH 0/1] clk: add DT fixed-factor-clock binding support   Gregory CLEMENT
• [PATCH] clk: add DT fixed-factor-clock binding support   Gregory CLEMENT
• [PATCH 01/24] arm: initial Xen support   Ian Campbell
• dreamplug spi partitions   Ian Campbell
• dreamplug spi partitions   Ian Campbell
• dreamplug spi partitions   Ian Campbell
• [PATCH 1/1] ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pin   Javier Martinez Canillas
• ARM hugetlb support?   Steve Capper
• ARM hugetlb support?   Steve Capper
• [PATCH 1/1] mx27_3ds: Add sound support   Gaëtan Carlier
• [PATCH 1/1] mx27_3ds: Add sound support   Gaëtan Carlier
• Custom platform for commercial device   Gaëtan Carlier
• Custom platform for commercial device   Gaëtan Carlier
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Gaëtan Carlier
• [PATCH 1/2] ARM: mx27pdk: Add audio support   Gaëtan Carlier
• [PATCH 1/2] ARM: mx27pdk: Add audio support   Gaëtan Carlier
• [PATCH v2] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Gaëtan Carlier
• i.MX27 SLCDC driver   Gaëtan Carlier
• mx27_3ds : Sound doesn't work anymore on linux-next   Gaëtan Carlier
• mx27_3ds : Sound doesn't work anymore on linux-next   Gaëtan Carlier
• i.MX27 SLCDC driver   Gaëtan Carlier
• mx27_3ds : Sound doesn't work anymore on linux-next   Gaëtan Carlier
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Gaëtan Carlier
• [PATCH 1/1] mxc_nand : allow swapping the Bad block Indicator for NFC v1.   Gaëtan Carlier
• [PATCH] MFD : MC13783 : add regulators sw1x and sw2x   Gaëtan Carlier
• SLAVE Side SPI kernel driver development   Bastelli Carlo
• SLAVE Side SPI kernel driver development   Bastelli Carlo
• [PATCH 0/4] Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH v4 1/4] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH v4 2/4] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM   AnilKumar Ch
• [PATCH v3 4/4] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH v3 0/4] Add AM33XX regulators device tree data   AnilKumar Ch
• [PATCH v3 1/4] arm/dts: regulator: Add tps65910 device tree data   AnilKumar Ch
• [PATCH v3 2/4] arm/dts: regulator: Add tps65217 device tree data   AnilKumar Ch
• [PATCH v3 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts   AnilKumar Ch
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   AnilKumar Ch
• [PATCH] ARM: OMAP2+: select PINCTRL in Kconfig   AnilKumar Ch
• [PATCH v4 0/3] Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH v4 3/3] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH v5 0/5] Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH v5 1/5] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH v5 2/5] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH v5 3/5] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH 4/5] leds: leds-gpio: adopt pinctrl support   AnilKumar Ch
• [PATCH 5/5] of: Modify c_can binding documentation   AnilKumar Ch
• [PATCH 0/2] ARM: OMAP2: AM33XX: Add cpufreq support   AnilKumar Ch
• [PATCH 1/2] ARM: OMAP2+: AM33XX: Add clock entries to omap_clk data   AnilKumar Ch
• [PATCH 2/2] arm/dts: AM33XX: Add device tree OPP table   AnilKumar Ch
• doubts about switch_mm   Gilles Chanteperdrix
• doubts about switch_mm   Gilles Chanteperdrix
• doubts about switch_mm   Gilles Chanteperdrix
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Alexey Charkov
• Vacations.   Mauro Carvalho Chehab
• [RFC 20/22] ARM: keystone: introducing TI Keystone platform   Cyril Chemparathy
• [PATCH 06/22] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Cyril Chemparathy
• [PATCH 01/22] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH 02/22] ARM: use late patch framework for phys-virt patching   Cyril Chemparathy
• [PATCH 03/22] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Cyril Chemparathy
• [PATCH 04/22] ARM: LPAE: support 64-bit virt/phys patching   Cyril Chemparathy
• [PATCH 08/22] ARM: LPAE: use phys_addr_t for initrd location and size   Cyril Chemparathy
• [PATCH 09/22] ARM: LPAE: use 64-bit pgd physical address in switch_mm()   Cyril Chemparathy
• [PATCH 00/22] Introducing the TI Keystone platform   Cyril Chemparathy
• [PATCH 01/22] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH 03/22] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Cyril Chemparathy
• [PATCH 01/22] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH 01/22] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH 01/22] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH 03/22] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Cyril Chemparathy
• [PATCH v2 00/22] Introducing the TI Keystone platform   Cyril Chemparathy
• [PATCH v2 01/22] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH v2 02/22] ARM: add self test for runtime patch mechanism   Cyril Chemparathy
• [PATCH v2 03/22] ARM: use late patch framework for phys-virt patching   Cyril Chemparathy
• [PATCH v2 04/22] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Cyril Chemparathy
• [PATCH v2 05/22] ARM: LPAE: support 64-bit virt_to_phys patching   Cyril Chemparathy
• [PATCH v2 06/22] ARM: LPAE: use signed arithmetic for mask definitions   Cyril Chemparathy
• [PATCH v2 07/22] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Cyril Chemparathy
• [PATCH v2 08/22] ARM: LPAE: use phys_addr_t in free_memmap()   Cyril Chemparathy
• [PATCH v2 09/22] ARM: LPAE: use phys_addr_t for initrd location and size   Cyril Chemparathy
• [PATCH v2 10/22] ARM: LPAE: use phys_addr_t in switch_mm()   Cyril Chemparathy
• [PATCH v2 11/22] ARM: LPAE: use 64-bit accessors for TTBR registers   Cyril Chemparathy
• [PATCH v2 12/22] ARM: LPAE: define ARCH_LOW_ADDRESS_LIMIT for bootmem   Cyril Chemparathy
• [PATCH v2 13/22] ARM: LPAE: factor out T1SZ and TTBR1 computations   Cyril Chemparathy
• [PATCH v2 14/22] ARM: LPAE: accomodate >32-bit addresses for page table base   Cyril Chemparathy
• [PATCH v2 15/22] ARM: mm: use physical addresses in highmem sanity checks   Cyril Chemparathy
• [PATCH v2 16/22] ARM: mm: cleanup checks for membank overlap with vmalloc area   Cyril Chemparathy
• [PATCH v2 17/22] ARM: mm: clean up membank size limit checks   Cyril Chemparathy
• [PATCH v2 18/22] ARM: add virt_to_idmap for interconnect aliasing   Cyril Chemparathy
• [PATCH v2 19/22] ARM: recreate kernel mappings in early_paging_init()   Cyril Chemparathy
• [RFC v2 21/22] ARM: keystone: enable SMP on Keystone machines   Cyril Chemparathy
• [RFC v2 22/22] ARM: keystone: add switch over to high physical address range   Cyril Chemparathy
• [RFC v2 20/22] ARM: keystone: introducing TI Keystone platform   Cyril Chemparathy
• [PATCH 2/2] ARM: local timers: add timer support using IO mapped register   Cyril Chemparathy
• [PATCH v2 1/2] ARM: arch_timers: enable the use of the virtual timer   Cyril Chemparathy
• [PATCH v2 1/2] ARM: arch_timers: enable the use of the virtual timer   Cyril Chemparathy
• [PATCH v2 02/22] ARM: add self test for runtime patch mechanism   Cyril Chemparathy
• [PATCH v2 03/22] ARM: use late patch framework for phys-virt patching   Cyril Chemparathy
• [PATCH v2 01/22] ARM: add mechanism for late code patching   Cyril Chemparathy
• [PATCH v2 05/22] ARM: LPAE: support 64-bit virt_to_phys patching   Cyril Chemparathy
• [PATCH v3 1/2] ARM: arch_timers: enable the use of the virtual timer   Cyril Chemparathy
• [PATCH] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"   Zumeng Chen
• [PATCH] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"   Zumeng Chen
• [PATCH] clk: add Loongson1B clock support   Kelvin Cheung
• [PATCH] clk: add Loongson1B clock support   Kelvin Cheung
• [PATCH v2] clk: add Loongson1B clock support   Kelvin Cheung
• [PATCH v3] clk: add Loongson1B clock support   Kelvin Cheung
• [PATCH v3] clk: add Loongson1B clock support   Kelvin Cheung
• [PATCH v3] clk: add Loongson1B clock support   Kelvin Cheung
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   KyongHo Cho
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   KyongHo Cho
• [PATCH 2/3 V2] IIO: Add basic MXS LRADC driver   Lars-Peter Clausen
• [PATCH 2/3 V2] IIO: Add basic MXS LRADC driver   Lars-Peter Clausen
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Lars-Peter Clausen
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Lars-Peter Clausen
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Lars-Peter Clausen
• Potential Regression in 3.6-rc1 - Kirkwood SATA   Josh Coombs
• Potential Regression in 3.6-rc1 - Kirkwood SATA   Josh Coombs
• PATCH Add support for the Iomega IX2-200 Device Tree   Josh Coombs
• [PATCH 0/3] ARM: Kirkwood: update defconfig and fix ts219 dtb   Jason Cooper
• [PATCH 1/3] ARM: Kirkwood: update defconfig   Jason Cooper
• [PATCH 2/3] ARM: Kirkwood: ts219: fix Makefile.boot after dts was split in two   Jason Cooper
• [PATCH 3/3] ARM: Kirkwood: add DT boards to defconfig   Jason Cooper
• [PATCH 2/3] ARM: Kirkwood: ts219: fix Makefile.boot after dts was split in two   Jason Cooper
• [PATCH 3/3] ARM: Kirkwood: add DT boards to defconfig   Jason Cooper
• [PATCH V2 0/3] ARM: Kirkwood: update defconfig, add dt boards   Jason Cooper
• [PATCH 1/2] ARM: Kirkwood: update defconfig   Jason Cooper
• [PATCH V2 2/2] ARM: Kirkwood: add DT boards to defconfig   Jason Cooper
• [PATCH 3/3] ARM: Kirkwood: add DT boards to defconfig   Jason Cooper
• [patch v2 1/1] ARM: Orion: Set eth packet size csum offload limit   Jason Cooper
• [PATCH] arm: add documentation describing Marvell families of SoC   Jason Cooper
• [PATCH 2/2] ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar   Jason Cooper
• [patch] ARM: Kirkwood: Fix iconnect leds   Jason Cooper
• [patch] ARM: Kirkwood: fix Makefile.boot   Jason Cooper
• [patch 1/2] ARM: Kirkwood: Describe iconnect keys in DT.   Jason Cooper
• [patch 2/2] ARM: Kirkwood: Describe iconnect nand in DT.   Jason Cooper
• [PATCH v2 1/2] ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar   Jason Cooper
• [GIT PULL] orion/kirkwood fixes for v3.6   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• [PATCH] ARM: Dove: allow PCI to be disabled   Jason Cooper
• [GIT PULL] orion/kirkwood fixes for v3.6   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• [GIT PULL V2] orion/kirkwood fixes for v3.6   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• PATCH Add support for the Iomega IX2-200 Device Tree   Jason Cooper
• [v3] Add basic address decoding support for Marvell 370/XP   Jason Cooper
• [PATCH v2 1/2] ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar   Jason Cooper
• [PATCH v2 1/2] ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar   Jason Cooper
• dreamplug spi partitions   Jason Cooper
• [v3] Add basic address decoding support for Marvell 370/XP   Jason Cooper
• [v3] Add basic address decoding support for Marvell 370/XP   Jason Cooper
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Jason Cooper
• dreamplug spi partitions   Jason Cooper
• [RFC PATCH] ARM: initial DTS support for km_kirkwood   Jason Cooper
• [PATCH] ARM: Kirkwood: Iomega ix2-200 DT support   Jason Cooper
• [PATCH] mtd: orion_nand: remove <mach/hardware.h> include   Jason Cooper
• [PATCH 3/3] ARM: Kirkwood: increase atomic coherent pool size   Jason Cooper
• [PATCH 3/3] ARM: Kirkwood: increase atomic coherent pool size   Jason Cooper
• arm: move plat-orion platform_data headers to the right place   Jason Cooper
• arm: move plat-orion platform_data headers to the right place   Jason Cooper
• arm: move plat-orion platform_data headers to the right place   Jason Cooper
• [GIT PULL] Kirkwood: board changes for v3.7   Jason Cooper
• [RFC PATCH] ARM: initial DTS support for km_kirkwood   Jason Cooper
• [PATCH v2] ARM: Build dtb files in all target   Jason Cooper
• [PATCH] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c   Jason Cooper
• [GIT PULL] kirkwood fix for v3.6   Jason Cooper
• [PATCH v2] ARM: Build dtb files in all target   Jason Cooper
• [PATCH] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c   Jason Cooper
• [PATCH v2] ARM: Build dtb files in all target   Jason Cooper
• [PATCH] ARM: Make sure dtc is built before running it   Jason Cooper
• [PATCH] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c   Jason Cooper
• [GIT PULL] kirkwood fix for v3.6   Jason Cooper
• [GIT PULL V2] kirkwood fix for v3.6   Jason Cooper
• omap_device: query on "fck" clk alias created   Benoit Cousson
• [PATCH] hwmon: tmp102: Add device tree support   Benoit Cousson
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Benoit Cousson
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Benoit Cousson
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Benoit Cousson
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Benoit Cousson
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Benoit Cousson
• [PATCHv2 0/4] Add device tree data for omap5   Benoit Cousson
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Benoit Cousson
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Benoit Cousson
• [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence   Benoit Cousson
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Benoit Cousson
• [PATCHv3 0/4] Add device tree data for omap5   Benoit Cousson
• [PATCHv3 0/4] Add device tree data for omap5   Benoit Cousson
• [PATCH 1/3] ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled   Benoit Cousson
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Benoit Cousson
• [PATCH 1/2] i2c-omap: Fix incorrect adapter id when booting from a device tree   Benoit Cousson
• [PATCHv3 0/4] Add device tree data for omap5   Benoit Cousson
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Benoit Cousson
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Benoit Cousson
• [36/36] AArch64: MAINTAINERS update   Christopher Covington
• [PATCH v2 28/31] arm64: Generic timers support   Christopher Covington
• [RFC/PATCH 02/13] serial: omap: always return IRQ_HANDLED   Alan Cox
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Alan Cox
• [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Alan Cox
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Alan Cox
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Alan Cox
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Alan Cox
• [RFC v2] ARM: sched_clock: update epoch_cyc on resume   Colin Cross
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Colin Cross
• [PATCH 1/4] ARM: clps711x: Remove board support for CEIVA   Colin Cross
• [PATCH 0/2] ARM: enable dumping stacks for CONFIG_SMP   Colin Cross
• [PATCH 1/2] ARM: stacktrace: enable dumping stacks for SMP && FRAME_POINTER   Colin Cross
• [PATCH 2/2] ARM: unwind: enable dumping stacks for SMP && ARM_UNWIND   Colin Cross
• [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Marcos Silva Cunha
• [PATCHv6 00/24] I2C big cleanup   Shubhrajyoti D
• [PATCHv6 01/24] i2c: omap: switch to devm_* API   Shubhrajyoti D
• [PATCHv6 02/24] i2c: omap: simplify num_bytes handling   Shubhrajyoti D
• [PATCHv6 03/24] i2c: omap: decrease indentation level on data handling   Shubhrajyoti D
• [PATCHv6 04/24] i2c: omap: add blank lines   Shubhrajyoti D
• [PATCHv6 05/24] i2c: omap: simplify omap_i2c_ack_stat()   Shubhrajyoti D
• [PATCHv6 06/24] i2c: omap: split out [XR]DR and [XR]RDY   Shubhrajyoti D
• [PATCHv6 07/24] i2c: omap: improve i462 errata handling   Shubhrajyoti D
• [PATCHv6 08/24] i2c: omap: re-factor receive/transmit data loop   Shubhrajyoti D
• [PATCHv6 09/24] i2c: omap: switch over to do {} while loop   Shubhrajyoti D
• [PATCHv6 10/24] i2c: omap: ack IRQ in parts   Shubhrajyoti D
• [PATCHv6 11/24] i2c: omap: switch to platform_get_irq()   Shubhrajyoti D
• [PATCHv6 12/24] i2c: omap: bus: add a receiver flag   Shubhrajyoti D
• [PATCHv6 13/24] i2c: omap: simplify errata check   Shubhrajyoti D
• [PATCHv6 14/24] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv6 15/24] i2c: omap: simplify IRQ exit path   Shubhrajyoti D
• [PATCHv6 16/24] i2c: omap: resize fifos before each message   Shubhrajyoti D
• [PATCHv6 17/24] i2c: omap: get rid of the "complete" label   Shubhrajyoti D
• [PATCHv6 18/24] i2c: omap: remove redundant status read   Shubhrajyoti D
• [PATCHv6 19/24] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv6 20/24] i2c: omap: switch to threaded IRQ support   Shubhrajyoti D
• [PATCHv6 21/24] i2c: omap: remove unnecessary pm_runtime_suspended check   Shubhrajyoti D
• [PATCHv6 22/24] i2c: omap: switch over to autosuspend API   Shubhrajyoti D
• [PATCHv6 23/24] i2c: omap: sanitize exit path   Shubhrajyoti D
• [PATCHv6 24/24] i2c: omap: Prevent NULL pointer dereference in remove   Shubhrajyoti D
• [PATCHv7 00/24] I2C big cleanup   Shubhrajyoti D
• [PATCHv7 01/24] i2c: omap: switch to devm_* API   Shubhrajyoti D
• [PATCHv7 02/24] i2c: omap: simplify num_bytes handling   Shubhrajyoti D
• [PATCHv7 03/24] i2c: omap: decrease indentation level on data handling   Shubhrajyoti D
• [PATCHv7 04/24] i2c: omap: add blank lines   Shubhrajyoti D
• [PATCHv7 05/24] i2c: omap: simplify omap_i2c_ack_stat()   Shubhrajyoti D
• [PATCHv7 06/24] i2c: omap: split out [XR]DR and [XR]RDY   Shubhrajyoti D
• [PATCHv7 07/24] i2c: omap: improve i462 errata handling   Shubhrajyoti D
• [PATCHv7 08/24] i2c: omap: re-factor receive/transmit data loop   Shubhrajyoti D
• [PATCHv7 09/24] i2c: omap: switch over to do {} while loop   Shubhrajyoti D
• [PATCHv7 10/24] i2c: omap: ack IRQ in parts   Shubhrajyoti D
• [PATCHv7 11/24] i2c: omap: switch to platform_get_irq()   Shubhrajyoti D
• [PATCHv7 12/24] i2c: omap: bus: add a receiver flag   Shubhrajyoti D
• [PATCHv7 13/24] i2c: omap: simplify errata check   Shubhrajyoti D
• [PATCHv7 14/24] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv7 15/24] i2c: omap: simplify IRQ exit path   Shubhrajyoti D
• [PATCHv7 16/24] i2c: omap: resize fifos before each message   Shubhrajyoti D
• [PATCHv7 17/24] i2c: omap: get rid of the "complete" label   Shubhrajyoti D
• [PATCHv7 18/24] i2c: omap: remove redundant status read   Shubhrajyoti D
• [PATCHv7 19/24] i2c: omap: always return IRQ_HANDLED   Shubhrajyoti D
• [PATCHv7 20/24] i2c: omap: switch to threaded IRQ support   Shubhrajyoti D
• [PATCHv7 21/24] i2c: omap: remove unnecessary pm_runtime_suspended check   Shubhrajyoti D
• [PATCHv7 22/24] i2c: omap: switch over to autosuspend API   Shubhrajyoti D
• [PATCHv7 23/24] i2c: omap: sanitize exit path   Shubhrajyoti D
• [PATCHv7 24/24] i2c: omap: Prevent NULL pointer dereference in remove   Shubhrajyoti D
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Magnus Damm
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Magnus Damm
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shubhrajyoti Datta
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Will Deacon
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Will Deacon
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Will Deacon
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Will Deacon
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Will Deacon
• [PATCH v5 0/3] Updated Cortex-M3 series   Will Deacon
• kernel entry for thumb2-only cpus   Will Deacon
• kernel entry for thumb2-only cpus   Will Deacon
• [PATCH] ARM: Don't enable GENERIC_LOCKBREAK with ticket spinlocks   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• [PATCH 1/2] ARM: hw_breakpoint: don't rely on dfsr to show watchpoint access type   Will Deacon
• [PATCH 2/2] ARM: hw_breakpoints: allow single-byte watchpoints on all addresses   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• Status of patch 7375/1   Will Deacon
• [PATCH 00/22] Introducing the TI Keystone platform   Will Deacon
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• [PATCH] mutex: place lock in contended state after fastpath_lock failure   Will Deacon
• LPAE for outer caches functiopns (was Re: [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl)   Will Deacon
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• Preliminary topic proposals for the ARM mini-summit   Will Deacon
• [PATCH 0/9] ARM perf updates for 3.7   Will Deacon
• [PATCH 1/9] ARM: PMU: Add runtime PM Support   Will Deacon
• [PATCH 2/9] ARM: perf: add devicetree bindings for 11MPcore, A5, A7 and A15 PMUs   Will Deacon
• [PATCH 3/9] ARM: pmu: remove unused reservation mechanism   Will Deacon
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Will Deacon
• [PATCH 5/9] ARM: perf: remove mysterious compiler barrier   Will Deacon
• [PATCH 6/9] ARM: perf: probe devicetree in preference to current CPU   Will Deacon
• [PATCH 7/9] ARM: perf: prepare for moving CPU PMU code into separate file   Will Deacon
• [PATCH 8/9] ARM: perf: move CPU-specific PMU handling code into separate file   Will Deacon
• [PATCH 9/9] ARM: perf: move irq registration into pmu implementation   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• [PATCH 0/9] ARM perf updates for 3.7   Will Deacon
• [PATCH 1/9] ARM: PMU: Add runtime PM Support   Will Deacon
• LPAE for outer caches functiopns (was Re: [RFC 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl)   Will Deacon
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Will Deacon
• [PATCH] ARM: mutex: use generic atomic_dec-based implementation for ARMv6+   Will Deacon
• [GIT PULL] io.h clean-up for PCI   Will Deacon
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Will Deacon
• [PATCH] ARM: support syscall tracing   Will Deacon
• [PATCH v2] ARM: support syscall tracing   Will Deacon
• [PATCH 0/3] New algorithm for ASID allocation and rollover   Will Deacon
• [PATCH 1/3] ARM: mm: remove IPI broadcasting on ASID rollover   Will Deacon
• [PATCH 2/3] ARM: mm: avoid taking ASID spinlock on fastpath   Will Deacon
• [PATCH 3/3] ARM: mm: use bitmap operations when allocating new ASIDs   Will Deacon
• [PATCH v2] ARM: support syscall tracing   Will Deacon
• [PATCH v2] ARM: support syscall tracing   Will Deacon
• [PATCH v2 03/31] arm64: Exception handling   Will Deacon
• [PATCH v2 16/31] arm64: ELF definitions   Will Deacon
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Will Deacon
• [PATCH v2 23/31] arm64: Debugging support   Will Deacon
• [PATCH v2 25/31] arm64: Performance counters support   Will Deacon
• [PATCH v2 26/31] arm64: Miscellaneous library functions   Will Deacon
• [PATCH] ARM: mm: only flush both pmd entries for classic MMU   Will Deacon
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Will Deacon
• [PATCH v2 23/31] arm64: Debugging support   Will Deacon
• [PATCH v2 23/31] arm64: Debugging support   Will Deacon
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Will Deacon
• [PATCH 0/3] New algorithm for ASID allocation and rollover   Will Deacon
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Will Deacon
• [PATCH] ARM: perf: update event period in response to PERF_EVENT_IOC_PERIOD   Will Deacon
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Will Deacon
• [PATCH v3] ARM: support syscall tracing   Will Deacon
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Will Deacon
• [PATCH v3] ARM: support syscall tracing   Will Deacon
• [PATCH v2 23/31] arm64: Debugging support   Will Deacon
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Will Deacon
• [PATCH v2] ARM: io: avoid writeback addressing modes for __raw_ accessors   Will Deacon
• [PATCH v2] serial: pl011: honour serial aliases in device tree   Will Deacon
• [PATCH 2/4] ARM: allow PID_IN_CONTEXTIDR only for ARMv7   Will Deacon
• [PATCH 1/4] ARM: export read_current_timer   Will Deacon
• [PATCH 1/4] ARM: export read_current_timer   Will Deacon
• [PATCH] ARM: contextidr: avoid using bfi instruction during notifier   Will Deacon
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Will Deacon
• [PATCHv3 4/4] ARM: kprobes: make more tests conditional   Will Deacon
• [PATCH] ARM: decompressor: reset ttbcr for VMSA ARMv7 cores   Will Deacon
• Cortex A9 with ACP needing mixed coherency model   Will Deacon
• [PATCH 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• Preliminary topic proposals for the ARM mini-summit   Will Deacon
• [PATCH] ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+   Will Deacon
• [PATCH 1/2] ARM: delay: set loops_per_jiffy when moving to timer-based loop   Will Deacon
• [PATCH 2/2] ARM: delay: add registration mechanism for delay timer sources   Will Deacon
• Preliminary topic proposals for the ARM mini-summit   Will Deacon
• [PATCH 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Will Deacon
• [PATCH] ARM: MSM: Implement read_current_timer for msm timers   Will Deacon
• [GIT PULL] ARM perf updates for 3.7   Will Deacon
• [PATCH v2 1/2] ARM: delay: set loops_per_jiffy when moving to timer-based loop   Will Deacon
• [PATCH v2 2/2] ARM: delay: add registration mechanism for delay timer sources   Will Deacon
• [PATCH v3 3/4] ARM: EXYNOS: Enable PMUs for exynos4   Will Deacon
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   Tarun Kanti DebBarma
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   DebBarma, Tarun Kanti
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   DebBarma, Tarun Kanti
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   DebBarma, Tarun Kanti
• MMAP_MIN_ADDR problem/question   Wolfgang Denk
• [PATCH] ARM: dt: tegra: paz00: add regulators   Laxman Dewangan
• [PATCH V3] ARM: dt: tegra: ventana: add regulators   Laxman Dewangan
• [PATCH] ARM: tegra: use IO_ADDRESS for getting virtual address   Laxman Dewangan
• [PATCH 1/2] ARM: tegra: remove dead code   Laxman Dewangan
• [PATCH 2/2] ARM: dt: tegra: harmony: add regulators   Laxman Dewangan
• [PATCH] ARM: tegra_defconfig: enable APB DMA support   Laxman Dewangan
• [PATCH 2/3] ARM: tegra: remove board (but not DT) support for Paz00   Marc Dietrich
• Preliminary topic proposals for the ARM mini-summit   Ben Dooks
• [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver   Ben Dooks
• [PATCHv6 2/2] ARM: dma-mapping: remove custom consistent dma region   Hiroshi Doyu
• [PATCHv6 2/2] ARM: dma-mapping: remove custom consistent dma region   Hiroshi Doyu
• [PATCHv6 2/2] ARM: dma-mapping: remove custom consistent dma region   Hiroshi Doyu
• [Linaro-mm-sig] [PATCH 2/3] ARM: DMA-Mapping: print warning when atomic coherent allocation fails   Hiroshi Doyu
• [PATCHv6 2/2] ARM: dma-mapping: remove custom consistent dma region   Hiroshi Doyu
• [RFC 0/4] ARM: dma-mapping: IOMMU atomic allocation   Hiroshi Doyu
• [RFC 1/4] ARM: dma-mapping: Refactor out to introduce __alloc_fill_pages   Hiroshi Doyu
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Hiroshi Doyu
• [RFC 3/4] ARM: dma-mapping: Return cpu addr when dma_alloc(GFP_ATOMIC)   Hiroshi Doyu
• [RFC 4/4] ARM: dma-mapping: dma_{alloc, free}_coherent with empty attrs   Hiroshi Doyu
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Hiroshi Doyu
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Hiroshi Doyu
• [RFC 0/4] ARM: dma-mapping: IOMMU atomic allocation   Hiroshi Doyu
• [v2 0/4] ARM: dma-mapping: IOMMU atomic allocation   Hiroshi Doyu
• [v2 1/4] ARM: dma-mapping: Refactor out to introduce __in_atomic_pool   Hiroshi Doyu
• [v2 2/4] ARM: dma-mapping: Use kzalloc() with GFP_ATOMIC   Hiroshi Doyu
• [v2 3/4] ARM: dma-mapping: Refactor out to introduce __alloc_fill_pages   Hiroshi Doyu
• [v2 4/4] ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC   Hiroshi Doyu
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Hiroshi Doyu
• [v3 0/4] ARM: dma-mapping: IOMMU atomic allocation   Hiroshi Doyu
• [v3 1/4] ARM: dma-mapping: atomic_pool with struct page **pages   Hiroshi Doyu
• [v3 2/4] ARM: dma-mapping: Refactor out to introduce __in_atomic_pool   Hiroshi Doyu
• [v3 3/4] ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()   Hiroshi Doyu
• [v3 4/4] ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC   Hiroshi Doyu
• [v3 2/4] ARM: dma-mapping: Refactor out to introduce __in_atomic_pool   Hiroshi Doyu
• [v3 1/4] ARM: dma-mapping: atomic_pool with struct page **pages   Hiroshi Doyu
• [v4 0/4] ARM: dma-mapping: IOMMU atomic allocation   Hiroshi Doyu
• [v4 1/4] ARM: dma-mapping: atomic_pool with struct page **pages   Hiroshi Doyu
• [v4 2/4] ARM: dma-mapping: Refactor out to introduce __in_atomic_pool   Hiroshi Doyu
• [v4 3/4] ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()   Hiroshi Doyu
• [v4 4/4] ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC   Hiroshi Doyu
• [PATCH 1/4] ARM: dma-mapping: Small logical clean up   Hiroshi Doyu
• [PATCH 2/4] ARM: dma-mapping: Remove unsed var at arm_coherent_iommu_unmap_page   Hiroshi Doyu
• [PATCH 3/4] ARM: dma-mapping: Refrain noisy console message   Hiroshi Doyu
• [PATCH 4/4] ARM: dma-mapping: Skip cache maint for invalid page   Hiroshi Doyu
• [PATCH 4/4] ARM: dma-mapping: Skip cache maint for invalid page   Hiroshi Doyu
• [RFC 0/5] ARM: dma-mapping: New dma_map_ops to control IOVA more precisely   Hiroshi Doyu
• [RFC 1/5] ARM: dma-mapping: New dma_map_ops->iova_get_free_{total, max} functions   Hiroshi Doyu
• [RFC 2/5] ARM: dma-mapping: New dma_map_ops->iova_{alloc, free}() functions   Hiroshi Doyu
• [RFC 3/5] ARM: dma-mapping: New dma_map_ops->iova_alloc*_at* function   Hiroshi Doyu
• [RFC 4/5] ARM: dma-mapping: New dma_map_ops->map_page*_at* function   Hiroshi Doyu
• [RFC 5/5] ARM: dma-mapping: Introduce dma_map_linear_attrs() for IOVA linear map   Hiroshi Doyu
• [PATCH v3 0/4] Use dma_mmap_coherent to support IOMMU mapper   Hideki EIRAKU
• [PATCH v3 1/4] ARM: dma-mapping: define ARCH_HAS_DMA_MMAP_COHERENT   Hideki EIRAKU
• [PATCH v3 2/4] ALSA: pcm - Don't define ARCH_HAS_DMA_MMAP_COHERENT privately for ARM   Hideki EIRAKU
• [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available   Hideki EIRAKU
• [PATCH v3 4/4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent if available   Hideki EIRAKU
• [PATCH v2 0/2] Renesas IPMMU driver for sh7372   Hideki EIRAKU
• [PATCH v2 1/2] iommu/shmobile: Add iommu driver for Renesas IPMMU modules   Hideki EIRAKU
• [PATCH v2 2/2] ARM: mach-shmobile: sh7372: Add IPMMU device   Hideki EIRAKU
• [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available   Hideki EIRAKU
• AT91 RM9200 hangs on delay loop calibration   Joachim Eastwood
• [PATCH] ARM: at91: fix drivers broken because of sparse irq support   Joachim Eastwood
• [PATCH] atmel-ssc: include linux/io.h for raw io   Joachim Eastwood
• [PATCH] clk: Make the generic clock API available by default   Hans-Christian Egtvedt
• [RFC] ARM: imx6q-sabrelite: Add CLKO IOMUX   Fabio Estevam
• [RFC] ARM: imx6q-sabrelite: Add CLKO IOMUX   Fabio Estevam
• [PATCH] ARM: imx6q-sabrelite: Setup CLKO IOMUX   Fabio Estevam
• [RFC] ARM: imx6q-sabrelite: Add CLKO IOMUX   Fabio Estevam
• [PATCH] ARM: imx6q-sabrelite: Setup CLKO IOMUX   Fabio Estevam
• [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver   Fabio Estevam
• [PATCH] ARM: dts: imx: fix gpio interrupts property   Fabio Estevam
• [PATCH] ARM: dts: imx: fix gpio interrupts property   Fabio Estevam
• Several crashes on imx_v6_v7_defconfig   Fabio Estevam
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Fabio Estevam
• [PATCH v2 1/2] hw_random: mxc-rnga: Adapt clocks to new i.mx clock framework   Fabio Estevam
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Fabio Estevam
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Fabio Estevam
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR   Fabio Estevam
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Enable USB host   Fabio Estevam
• [PATCH] clk: mxs: Register USB clocks for mx23   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Enable USB host   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Enable USB host   Fabio Estevam
• [PATCH v2] ARM: mxs_defconfig: Enable USB host   Fabio Estevam
• [PATCH 1/1] mx27_3ds: Add sound support   Fabio Estevam
• [PATCH 1/1] mx27_3ds: Add sound support   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support   Fabio Estevam
• [PATCH 1/1] mx27_3ds: Add sound support   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Add framebuffer support   Fabio Estevam
• [PATCH 6/6] ARM: imx: gpmi-nand depends on mxs-dma   Fabio Estevam
• [PATCH] ARM: plat-mxc: Remove unused imx_ioremap   Fabio Estevam
• [PATCH 6/6] ARM: imx: gpmi-nand depends on mxs-dma   Fabio Estevam
• [PATCH] ARM: dts: imx: Move SDMA firmware to SoC dtsi file   Fabio Estevam
• [PATCH 1/2] ARM: mx27pdk: Add audio support   Fabio Estevam
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Fabio Estevam
• USB host on mx23-olinuxino   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support   Fabio Estevam
• [PATCH v2] ARM: mxs_defconfig: Add framebuffer support   Fabio Estevam
• [PATCH] mtd: gpmi: add NAND write verify support   Fabio Estevam
• [PATCH v2 2/2] ARM: imx/pcm043: add oftree support   Fabio Estevam
• [PATCH v2 2/2] ARM: imx/pcm043: add oftree support   Fabio Estevam
• [PATCH] mtd: gpmi: add NAND write verify support   Fabio Estevam
• [PATCH] clk: mxs: Register USB clocks for mx23   Fabio Estevam
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Fabio Estevam
• [PATCH v2 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Fabio Estevam
• [PATCH v2 2/2] ARM: mach-mxs: Remove board entries in dt_board_compat   Fabio Estevam
• [PATCH v3 2/2] ARM: mach-mxs: Remove board entries in dt_board_compat   Fabio Estevam
• PATCH Add support for the Iomega IX2-200 Device Tree   Fabio Estevam
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Fabio Estevam
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Fabio Estevam
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Fabio Estevam
• [PATCH 01/11] ARM: defconfig: Remove CONFIG_MISC_DEVICES   Fabio Estevam
• [PATCH 1/2] ARM: clk-imx35: Fix SSI clock registration   Fabio Estevam
• [PATCH 2/2] ARM: clk-imx25: Fix SSI clock registration   Fabio Estevam
• [PATCH v2 2/2] ARM: clk-imx25: Fix SSI clock registration   Fabio Estevam
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Fabio Estevam
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Fabio Estevam
• [PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration   Fabio Estevam
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Fabio Estevam
• [PATCH] ARM: Kirkwood: Iomega IX2-200 Device Tree Support Patch v2 Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Fabio Estevam
• [PATCH] ARM: olinuxino: Add gpio-led support   Fabio Estevam
• [PATCH 1/3] ARM: mxs: Rename 'hog-gpios'   Fabio Estevam
• [PATCH 2/3] ARM: mxs: Let mmc0 pin detect be generic   Fabio Estevam
• [PATCH 3/3] ARM: olinuxino: Add gpio-led support   Fabio Estevam
• [PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration   Fabio Estevam
• [PATCH v2] ARM: imx: add imx5x usb controller clock lookups   Fabio Estevam
• [PATCH v2] ARM: imx: add imx5x usb controller clock lookups   Fabio Estevam
• SLAVE Side SPI kernel driver development   Fabio Estevam
• [PATCH] ARM: imx6q-sabrelite: Rename 'pinctrl_gpio_hog'   Fabio Estevam
• [PATCH 1/3] ARM: mx28evk: Add SPI flash support   Fabio Estevam
• [PATCH 2/3] ARM: mx28evk: Add LRADC support   Fabio Estevam
• [PATCH 3/3] ARM: mxs_defconfig: Add SPI and LRADC support   Fabio Estevam
• [PATCH] dma: imx-dma: Fix kernel crash due to missing clock conversion   Fabio Estevam
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Fabio Estevam
• [PATCH] ARM: mx28evk: Add I2C EEPROM support   Fabio Estevam
• [PATCH 1/3] ARM: mx28evk: Add SPI flash support   Fabio Estevam
• [PATCH 1/2] ARM: clk-imx35: Fix SSI clock registration   Fabio Estevam
• [PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration   Fabio Estevam
• [PATCH] ARM: imx27-phytec-phycore: Fix I2C EEPROM address   Fabio Estevam
• [PATCH] clk: mxs: Register USB clocks for mx23   Fabio Estevam
• Status of patch 7375/1   Wade Farnsworth
• Status of patch 7375/1   Wade Farnsworth
• [PATCH] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v2] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v2] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v2] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v2] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v2] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v3] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v4] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v3] ARM: support syscall tracing   Wade Farnsworth
• [PATCH v3] ARM: support syscall tracing   Wade Farnsworth
• [PATCH 1/4] ARM: at91: gpio: implement request   Nicolas Ferre
• [PATCH 2/4] ARM: at91: gpio: implement gpio_free   Nicolas Ferre
• [PATCH 3/4] at91: regroup gpio and pinctrl under a simple-bus   Nicolas Ferre
• [PATCH 4/4] arm: at91: at91sam9x5: fix gpio number per bank   Nicolas Ferre
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Nicolas Ferre
• [GIT PULL] at91: soc update (for 3.6)   Nicolas Ferre
• [GIT PULL] at91: platform data for atmel-mci (for 3.5)   Nicolas Ferre
• [PATCH 13/23] AT91 DMA OF support   Nicolas Ferre
• [PATCH 00/23] work in progress: SPI controller w/DMA SAM9X5   Nicolas Ferre
• [PATCH 00/23] work in progress: SPI controller w/DMA SAM9X5   Nicolas Ferre
• [PATCH 1/5] i2c: at91: add new fixes for some TWI ip versions   Nicolas Ferre
• [PATCH 2/5] i2c: at91: add dt support to i2c-at91   Nicolas Ferre
• [PATCH 3/5] ARM: at91: add clocks for i2c DT entries   Nicolas Ferre
• [PATCH 4/5] ARM: dts: add twi nodes for atmel SOCs   Nicolas Ferre
• [PATCH 5/5] ARM: dts: add twi nodes for atmel boards   Nicolas Ferre
• [PATCH v2 1/2] ARM: at91: fix system timer irq issue due to sparse irq support   Nicolas Ferre
• [PATCH v2 2/2] ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support   Nicolas Ferre
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Nicolas Ferre
• [PATCH] arm: dts: remove partial parameter in at91sam9g25ek.dts   Nicolas Ferre
• [PATCH] atmel-ssc: include linux/io.h for raw io   Nicolas Ferre
• [PATCH] atmel-ssc: include linux/io.h for raw io   Nicolas Ferre
• [PATCH] ARM: at91/feature-removal-schedule: delay at91_mci removal   Nicolas Ferre
• [PATCH] ASoC: atmel-ssc: include linux/io.h for raw io   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.6 (take 1)   Nicolas Ferre
• [PATCH] ASoC: atmel-ssc: include linux/io.h for raw io   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.6 (take 1)   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.6 (take 1 bis)   Nicolas Ferre
• [PATCH] USB: ohci-at91: fix PIO handling in relation with number of ports   Nicolas Ferre
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Nicolas Ferre
• [PATCH 7/8] ARM: dts: add twi nodes for atmel SOCs   Nicolas Ferre
• [PATCH 8/8] ARM: dts: add twi nodes for atmel boards   Nicolas Ferre
• Issues with all kernels after 3.3.7   Tomasz Figa
• Issues with all kernels after 3.3.7   Tomasz Figa
• [PATCH v5 1/2] ARM: Make a compile firmware conditionally   Tomasz Figa
• [PATCH v5 2/2] ARM: EXYNOS: SMC instruction (aka firmware) support   Tomasz Figa
• [PATCH 0/3] ARM: EXYNOS: Add support for GPIO on Exynos4x12   Tomasz Figa
• [PATCH 1/3] ARM: EXYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Tomasz Figa
• [PATCH 2/3] gpio: samsung: Add support for Exynos4x12 SoCs   Tomasz Figa
• [PATCH 3/3] ARM: EXYNOS: Add support for FIMC cam port B GPIO setup on Exynos4x12   Tomasz Figa
• [PATCH] ARM: EXYNOS: Use non-secure MDMA1   Tomasz Figa
• [PATCH] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Tomasz Figa
• [PATCH 2/3] gpio: samsung: Add support for Exynos4x12 SoCs   Tomasz Figa
• [PATCH] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Tomasz Figa
• [PATCH 1/3] ARM: EXYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Tomasz Figa
• [PATCH v2] ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412   Tomasz Figa
• [PATCH RESEND 0/6] ARM: EXYNOS: Add support for Trats board using device tree   Tomasz Figa
• [PATCH 1/6] ARM: dts: Move parts common to Exynos4 from Exynos4210.dtsi to Exynos4.dtsi   Tomasz Figa
• [PATCH 2/6] ARM: EXYNOS: exynos4-dt: Use exynos4 prefix instead of exynos4210   Tomasz Figa
• [PATCH 3/6] ARM: Exynos4: dts: Specify address and size cells for i2c controllers   Tomasz Figa
• [PATCH 4/6] ARM: Exynos4: Add OF compatibility lookups for Exynos4 i2c adapters   Tomasz Figa
• [PATCH 5/6] ARM: EXYNOS: Increase maximum possible memory bank size to 512MiB   Tomasz Figa
• [PATCH 6/6] ARM: Exynos: Add basic dts file for Samsung Trats board   Tomasz Figa
• SLAVE Side SPI kernel driver development   Ned Forrester
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Christoph Fritz
• [PATCH v2 16/31] arm64: ELF definitions   Mike Frysinger
• [PATCH v4 0/6] Port Tegra to generic clk framework   Prashant Gaikwad
• [PATCH v4 1/6] ARM: tegra30: Separate out clk ops and clk data   Prashant Gaikwad
• [PATCH v4 2/6] ARM: tegra20: Separate out clk ops and clk data   Prashant Gaikwad
• [PATCH v4 3/6] ARM: tegra: Rename tegra20 clock file   Prashant Gaikwad
• [PATCH v4 4/6] ARM: tegra: Add clk_tegra structure and helper functions   Prashant Gaikwad
• [PATCH v4 6/6] ARM: tegra: Remove duplicate code   Prashant Gaikwad
• [PATCH v4 5/6] ARM: tegra: Port tegra to generic clock framework   Prashant Gaikwad
• [PATCH v2 0/4] dmaengine: add support mmp-pdma   Zhangfei Gao
• [PATCH v2 1/4] dmaengine: mmp-pdma support   Zhangfei Gao
• [PATCH v2 2/4] dmaengine: mmp_tdma: add dt support   Zhangfei Gao
• [PATCH v2 3/4] dmatest: add dmaengine_slave_config for DMA_MEMCPY   Zhangfei Gao
• [PATCH v2 4/4] mtd: pxa3xx-nand: replace pxa_request_dma with dmaengine   Zhangfei Gao
• [PATCH v3 0/4] dmaengine: add support mmp-pdma   Zhangfei Gao
• [PATCH v3 1/4] dmaengine: mmp-pdma support   Zhangfei Gao
• [PATCH v3 2/4] dmaengine: mmp_tdma: add dt support   Zhangfei Gao
• [PATCH v3 3/4] dmatest: add dmaengine_slave_config for DMA_MEMCPY   Zhangfei Gao
• [PATCH v3 4/4] mtd: pxa3xx-nand: replace pxa_request_dma with dmaengine   Zhangfei Gao
• [PATCH v4 0/2] dmaengine: add support mmp-pdma   Zhangfei Gao
• [PATCH v4 1/2] dmaengine: mmp-pdma support   Zhangfei Gao
• [PATCH v4 2/2] dmaengine: mmp_tdma: add dt support   Zhangfei Gao
• [GIT PULL] Update LZO compression   Jeff Garzik
• [GIT PULL] Update LZO compression   Jeff Garzik
• [PATCH 05/14] ARM: at91: add pinctrl support   Richard Genoud
• [PATCH 05/14] ARM: at91: add pinctrl support   Richard Genoud
• [PATCH 00/23] work in progress: SPI controller w/DMA SAM9X5   Richard Genoud
• [PATCH 01/23] of: add dma-mask binding   Richard Genoud
• [PATCH 02/23] of_spi: add generic binding support to specify cs gpio   Richard Genoud
• [PATCH 03/23] spi/atmel_spi: trivial: change some comments   Richard Genoud
• [PATCH 04/23] spi/atmel_spi: add physical base address   Richard Genoud
• [PATCH 05/23] spi/atmel_spi: call unmapping on transfers buffers   Richard Genoud
• [PATCH 06/23] spi/atmel_spi: status information passed through controller data   Richard Genoud
• [PATCH 07/23] spi/atmel_spi: add flag to controller data for lock operations   Richard Genoud
• [PATCH 08/23] spi/atmel: add DT support   Richard Genoud
• [PATCH 09/23] spi/atmel_spi: add dmaengine support   Richard Genoud
• [PATCH 10/23] spi-atmel: update with dmaengine interface   Richard Genoud
• [PATCH 11/23] spi-atmel: fix __init/__devinit sections mismatch   Richard Genoud
• [PATCH 12/23] spi-atmel: Fix spi-atmel driver to adapt to slave_config changes   Richard Genoud
• [PATCH 13/23] AT91 DMA OF support   Richard Genoud
• [PATCH 14/23] add at91sam9x5 Kconfig ARCH/SOC link   Richard Genoud
• [PATCH 15/23] spi-atmel: add DMA OF support   Richard Genoud
• [PATCH 16/23] [BUG] SPI: array out of bound => no CS   Richard Genoud
• [PATCH 17/23] [BUG] atmel-spi && DMA: OOPS if buffer > 4400 bytes   Richard Genoud
• [PATCH 18/23] sam9x5: declare SPI clocks   Richard Genoud
• [PATCH 19/23] spi-atmel: add sam9x5 SPI in device tree   Richard Genoud
• [PATCH 20/23] spi-atmel: add dma support in sam9x5 device tree   Richard Genoud
• [PATCH 21/23] spi-atmel OF: complete documentation   Richard Genoud
• [PATCH 22/23] spi-atmel: complete DMA slave OF documentation   Richard Genoud
• [PATCH 23/23] sam9x5ek DTS: enable SPI dataflash   Richard Genoud
• [PATCH 00/23] work in progress: SPI controller w/DMA SAM9X5   Richard Genoud
• [PATCH 00/23] work in progress: SPI controller w/DMA SAM9X5   Richard Genoud
• [PATCH 13/14] arm: at91: dt: at91sam9 add nand pinctrl support   Richard Genoud
• [PATCH 13/14] arm: at91: dt: at91sam9 add nand pinctrl support   Richard Genoud
• [PATCH] BUG: clk_find() misses some clocks   Richard Genoud
• [PATCH] BUG: clk_find() misses some clocks   Richard Genoud
• [PATCH 0/8] UBI: add max_beb_per1024 parameter / ioctl   Richard Genoud
• [PATCH 1/8] arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit   Richard Genoud
• [PATCH 2/8] UBI: separate bad_peb_limit in a function   Richard Genoud
• [PATCH 3/8] UBI: introduce MTD_PARAM_MAX_COUNT   Richard Genoud
• [PATCH 4/8] UBI: prepare for max_beb_per1024 module parameter addition   Richard Genoud
• [PATCH 5/8] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev   Richard Genoud
• [PATCH 6/8] UBI: replace MTD_UBI_BEB_LIMIT with module parameter   Richard Genoud
• [PATCH 7/8] UBI: add ioctl for max_beb_per1024   Richard Genoud
• [PATCH 8/8] UBI: drop CONFIG_MTD_UBI_BEB_LIMIT   Richard Genoud
• [PATCH 06/14] arm: at91: dt: at91sam9 add pinctrl support   Richard Genoud
• [PATCH 5/8] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev   Richard Genoud
• [PATCH 6/8] UBI: replace MTD_UBI_BEB_LIMIT with module parameter   Richard Genoud
• [PATCH 6/8] UBI: replace MTD_UBI_BEB_LIMIT with module parameter   Richard Genoud
• [PATCH 06/14] arm: at91: dt: at91sam9 add pinctrl support   Richard Genoud
• [PATCH 06/14] arm: at91: dt: at91sam9 add pinctrl support   Richard Genoud
• [PATCH 05/14] ARM: at91: add pinctrl support   Richard Genoud
• [PATCH 05/14] ARM: at91: add pinctrl support   Richard Genoud
• [PATCH v2 03/31] arm64: Exception handling   Thomas Gleixner
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Daniel De Graaf
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Daniel De Graaf
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Daniel De Graaf
• [PATCH 1/2] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Igor Grinberg
• [PATCH 1/2] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Igor Grinberg
• [PATCH] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"   Igor Grinberg
• [PATCH] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"   Igor Grinberg
• [PATCH] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"   Igor Grinberg
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH v2 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH v6 01/10] ARM: OMAP2+: nand: unify init functions   Igor Grinberg
• [PATCH] ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH 0/9] ARM: OMAP: cleanup plat/board.h file   Igor Grinberg
• [PATCH 1/9] ARM: OMAP: cleanup struct omap_board_config_kernel   Igor Grinberg
• [PATCH 2/9] ARM: OMAP: omap3evm: cleanup revision bits   Igor Grinberg
• [PATCH 3/9] ARM: OMAP: remove the sti console workaround   Igor Grinberg
• [PATCH 4/9] ARM: OMAP1: remove the crystal type tag parsing   Igor Grinberg
• [PATCH 5/9] ARM: OMAP: remove the omap custom tags   Igor Grinberg
• [PATCH 6/9] ARM: OMAP1: move omap1_bl pdata out of arch/arm/*   Igor Grinberg
• [PATCH 7/9] ARM: OMAP1: move lcd pdata out of arch/arm/*   Igor Grinberg
• [PATCH 8/9] ARM: OMAP: move debug_card_init() function   Igor Grinberg
• [PATCH 9/9] ARM: OMAP: remove plat/board.h file   Igor Grinberg
• [PATCH 6/9] ARM: OMAP1: move omap1_bl pdata out of arch/arm/*   Igor Grinberg
• [PATCH] ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER   Igor Grinberg
• [PATCH] ARM: dts: imx: add imx5x usb entries   Michael Grzeschik
• [PATCH] ARM: imx: add imx5x usb controller clock lookups   Michael Grzeschik
• [PATCH v2] ARM: imx: add imx5x usb controller clock lookups   Michael Grzeschik
• [PATCH v2] ARM: imx: add imx5x usb controller clock lookups   Michael Grzeschik
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Michael Grzeschik
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller   Shawn Guo
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller   Shawn Guo
• [PATCH] ARM: imx6q-sabrelite: Setup CLKO IOMUX   Shawn Guo
• [PATCH] ARM: imx6q-sabrelite: Setup CLKO IOMUX   Shawn Guo
• [PATCH] ARM: dts: imx: fix gpio interrupts property   Shawn Guo
• [PATCH 1/2] ARM: imx: enable emi_slow_gate clock for imx5   Shawn Guo
• [PATCH 2/2] ARM: dts: imx53-ard: add regulators for lan9220   Shawn Guo
• [PATCH v2 1/1] ARM: mx28evk: add missed clkmux select for saif   Shawn Guo
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Shawn Guo
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Shawn Guo
• [PATCH 1/2] ARM: i.MX35: Add kernel oftree support   Shawn Guo
• [PATCH 2/2] ARM: imx/pcm043: add oftree support   Shawn Guo
• [PATCH 1/2] ARM: imx: enable emi_slow_gate clock for imx5   Shawn Guo
• [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree   Shawn Guo
• [PATCH V2] MXS: Remove MMAP_MIN_ADDR setting from mxs_defconfig   Shawn Guo
• [GIT PULL] mxs fixes for 3.6   Shawn Guo
• [GIT PULL] imx fixes for 3.6   Shawn Guo
• [GIT PULL] mxs fixes for 3.6   Shawn Guo
• [PATCH 1/4] gpio/mxc: remove redundant shadow variables initialization   Shawn Guo
• [PATCH 2/4] gpio/mxc: specify gpio base for device tree probe   Shawn Guo
• [PATCH 3/4] gpio/mxs: specify gpio base for device tree probe   Shawn Guo
• [PATCH 4/4] ARM: dts: imx: add alias for gpio   Shawn Guo
• [PATCH v2 0/4] Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH v2 1/4] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Shawn Guo
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Shawn Guo
• [PATCH v2 4/4] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH 0/4] Remove Genesi Efika MX support   Shawn Guo
• [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi   Shawn Guo
• [PATCH 2/3 V2] IIO: Add basic MXS LRADC driver   Shawn Guo
• [PATCH 3/3] IIO: arm: Add LRADC to i.MX28 dts   Shawn Guo
• [PATCH] ARM: mxs_defconfig: Enable USB host   Shawn Guo
• [PATCH] clk: mxs: Register USB clocks for mx23   Shawn Guo
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH v2] ARM: mxs_defconfig: Enable USB host   Shawn Guo
• [PATCH 3/4] gpio/mxs: specify gpio base for device tree probe   Shawn Guo
• [PATCH 0/6] ARM: mxs: remove board files   Shawn Guo
• [PATCH 1/6] ARM: mxs: tx28: reset fec phy for device tree boot   Shawn Guo
• [PATCH 2/6] ARM: mxs: use auxdata to pass flexcan_switch function hook   Shawn Guo
• [PATCH 3/6] ARM: mxs: remove board files   Shawn Guo
• [PATCH 4/6] ARM: mxs: remove non-DT core functions   Shawn Guo
• [PATCH 5/6] ARM: mxs: remove platform device codes   Shawn Guo
• [PATCH 6/6] ARM: mxs: remove iomux driver   Shawn Guo
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Shawn Guo
• [PATCH 1/2] ARM: i.MX35: Add kernel oftree support   Shawn Guo
• [PATCH 1/6] ARM: mxs: tx28: reset fec phy for device tree boot   Shawn Guo
• [PATCH] ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support   Shawn Guo
• imx6q restart is broken   Shawn Guo
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Shawn Guo
• [PATCH 1/6] ARM: mxs: tx28: reset fec phy for device tree boot   Shawn Guo
• [PATCH 1/2] ARM: i.MX35: Add kernel oftree support   Shawn Guo
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Shawn Guo
• imx6q restart is broken   Shawn Guo
• imx6q restart is broken   Shawn Guo
• [PATCH] ARM: dts: imx: Move SDMA firmware to SoC dtsi file   Shawn Guo
• imx6q restart is broken   Shawn Guo
• imx6q restart is broken   Shawn Guo
• imx6q restart is broken   Shawn Guo
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Shawn Guo
• [PATCH] ARM: imx/imx31-dt: drop selecting USE_OF   Shawn Guo
• [PATCH] ARM: imx/iomux-v3: allow pad_list to be const   Shawn Guo
• [PATCH v2] ARM: mxs_defconfig: Add framebuffer support   Shawn Guo
• [PATCH] ARM: imx/iomux-v3: allow pad_list to be const   Shawn Guo
• [PATCH v3 0/3] Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Shawn Guo
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Shawn Guo
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Shawn Guo
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Shawn Guo
• [PATCH v2 1/2] ARM: i.MX35: Add kernel oftree support   Shawn Guo
• [PATCH 00/17] ARM: imx: add pinctrl settings for DT boot   Shawn Guo
• [PATCH 01/17] ARM: dts: imx6q: improve indentation for fsl,pins   Shawn Guo
• [PATCH 02/17] ARM: dts: imx6q: name iomuxc sub-nodes following pin function   Shawn Guo
• [PATCH 03/17] ARM: dts: imx6q: sort iomuxc sub-nodes in name   Shawn Guo
• [PATCH 04/17] ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet   Shawn Guo
• [PATCH 05/17] ARM: dts: imx6q-arm2: add pinctrl for uart and enet   Shawn Guo
• [PATCH 06/17] ARM: dts: imx6q-sabresd: add pinctrl settings   Shawn Guo
• [PATCH 07/17] ARM: imx6q: remove dummy pinctrl state   Shawn Guo
• [PATCH 08/17] ARM: dts: imx53-qsb: add pinctrl settings   Shawn Guo
• [PATCH 09/17] ARM: dts: imx53-ard: add pinctrl settings   Shawn Guo
• [PATCH 10/17] ARM: dts: imx53-evk: add pinctrl settings   Shawn Guo
• [PATCH 11/17] ARM: dts: imx53-smd: add pinctrl settings   Shawn Guo
• [PATCH 12/17] ARM: imx53: build in pinctrl support   Shawn Guo
• [PATCH 13/17] ARM: imx53: decouple device tree boot from board files   Shawn Guo
• [PATCH 14/17] ARM: imx53: support device tree boot only   Shawn Guo
• [PATCH 16/17] ARM: dts: imx51-babbage: add pinctrl settings   Shawn Guo
• [PATCH 17/17] ARM: imx51: build in pinctrl support   Shawn Guo
• [PATCH 15/17] ARM: imx53: remove unneeded files and functions   Shawn Guo
• [PATCH 18/18] ARM: imx51: decouple device tree boot from board files   Shawn Guo
• [PATCH 00/10 V3] MXS SPI driver   Shawn Guo
• [PATCH] pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI   Shawn Guo
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• [PATCH v2 2/2] ARM: imx/pcm043: add oftree support   Shawn Guo
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Shawn Guo
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Shawn Guo
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Shawn Guo
• [PATCH v2 1/2] ARM: i.MX35: Add kernel oftree support   Shawn Guo
• How to define gpio irq with device tree   Shawn Guo
• How to define gpio irq with device tree   Shawn Guo
• [PATCH] ARM: imx6q: register fixed clocks in the common way   Shawn Guo
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• [PATCH v3 2/3] Input: add devicetree binding note for egalax_ts   Shawn Guo
• [PATCH v3 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Shawn Guo
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• [rtc-linux] [PATCH v3] rtc: snvs: add Freescale rtc-snvs driver   Shawn Guo
• [PATCH v2 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Shawn Guo
• [PATCH v3 2/2] ARM: mach-mxs: Remove board entries in dt_board_compat   Shawn Guo
• [PATCH] ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path   Shawn Guo
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• imx6q restart is broken   Shawn Guo
• [PATCH] rtc: snvs: change timeout to use a fixed number of loop   Shawn Guo
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• [PATCH 0/2] Move imx6q clock lookup over to device tree   Shawn Guo
• [PATCH 1/2] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v4 1/3] Input: egalax_ts: get gpio from devicetree node   Shawn Guo
• [PATCH v4 2/3] Input: add devicetree binding note for egalax_ts   Shawn Guo
• [PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Shawn Guo
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• imx6q restart is broken   Shawn Guo
• [PATCH] ARM: imx6q: remove imx_src_prepare_restart() call   Shawn Guo
• [rtc-linux] [PATCH v3] rtc: snvs: add Freescale rtc-snvs driver   Shawn Guo
• [rtc-linux] [PATCH v3] rtc: snvs: add Freescale rtc-snvs driver   Shawn Guo
• [PATCH] ARM: imx6: spin the cpu until hardware takes it down   Shawn Guo
• [PATCH] rtc: snvs: improve timeout handling in snvs_rtc_enable()   Shawn Guo
• [PATCH 3/4] clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH 4/4] clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup   Shawn Guo
• imx6q restart is broken   Shawn Guo
• [PATCH 0/6] Enable SPARSE_IRQ for mach-mxs   Shawn Guo
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Shawn Guo
• [PATCH 2/6] ARM: mxs: retrieve timer irq from device tree   Shawn Guo
• [PATCH 3/6] ARM: mxs: select MULTI_IRQ_HANDLER   Shawn Guo
• [PATCH 4/6] ARM: mxs: adopt irq_domain support for icoll driver   Shawn Guo
• [PATCH 5/6] ARM: mxs: select SPARSE_IRQ   Shawn Guo
• [PATCH 6/6] ARM: mxs: remove mach/irqs.h   Shawn Guo
• [PATCH 5/6] ARM: mxs: select SPARSE_IRQ   Shawn Guo
• [PATCH 1/2] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Shawn Guo
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH] ARM: olinuxino: Add gpio-led support   Shawn Guo
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v2 0/4] Move imx6q/28/23 clock lookup over to device tree   Shawn Guo
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH v2 2/4] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v2 3/4] clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v2 4/4] clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH] ARM: dts: imx51-babbage: fix esdhc cd/wp properties   Shawn Guo
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Shawn Guo
• [PATCH] ARM: dts: imx51-babbage: fix esdhc cd/wp properties   Shawn Guo
• Can one set GPIO direction in pinmux definition?   Shawn Guo
• [PATCH 1/3] ARM: mxs: Rename 'hog-gpios'   Shawn Guo
• [PATCH 3/6] ARM: imx: build pm-imx5 code only when PM is enabled   Shawn Guo
• [PATCH 4/6] ARM: imx: fix ksz9021rn_phy_fixup   Shawn Guo
• [PATCH 5/6] ARM: imx: select CPU_FREQ_TABLE when needed   Shawn Guo
• [PATCH 6/6] ARM: imx: select ARM_CPU_SUSPEND when necessary   Shawn Guo
• [GIT PULL] imx fixes for 3.6 (take 2)   Shawn Guo
• [GIT PULL] imx fixes for 3.6 (take 2)   Shawn Guo
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Shawn Guo
• [PATCH] ARM: dts: imx: add imx5x usb entries   Shawn Guo
• [PATCH] ARM: imx: add imx5x usb controller clock lookups   Shawn Guo
• [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28   Shawn Guo
• [PATCH 3/4] ARM: dts: mxs: Add pwm4 muxing options for imx28   Shawn Guo
• [PATCH 4/4] ARM: dts: mxs: add oled support for the cfa-10036   Shawn Guo
• [PATCH 6/6] ARM: imx: select ARM_CPU_SUSPEND when necessary   Shawn Guo
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Shawn Guo
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Shawn Guo
• [PATCH] ARM: imx: fix imx51 babbage SD2 CD/WP   Shawn Guo
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Shawn Guo
• [PATCH 1/2] imx6q: Configure the pwm node for pinmux support   Shawn Guo
• [PATCH 2/2] imx6q: Set pwm control register during enable and config call   Shawn Guo
• [PATCH 1/2] ARM: mx28: Add SPI pinmux into imx28.dtsi   Shawn Guo
• [PATCH 2/2] ARM: mxs: Update DENX M28 machine and dts file   Shawn Guo
• [PATCH 0/4] [RFC] ARM: multiplatform: rename all mach headers   Shawn Guo
• [PATCH 0/5] Add device tree support for on-chip SRAM   Shawn Guo
• [PATCH] ARM: imx6q-sabrelite: Rename 'pinctrl_gpio_hog'   Shawn Guo
• Shutdown problem in SMP system happened on Tegra20   Shawn Guo
• [PATCH 1/4 V2] ARM: mx28: Add SPI 2 pinmux into imx28.dtsi   Shawn Guo
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Shawn Guo
• [PATCH 3/4 V2] ARM: mxs: Update DENX M28 machine and dts file   Shawn Guo
• [PATCH 4/4] ARM: mxs: Add SchulerControl SPS1 DTS file   Shawn Guo
• Shutdown problem in SMP system happened on Tegra20   Shawn Guo
• [PATCH 4/4] ARM: mxs: Add SchulerControl SPS1 DTS file   Shawn Guo
• [PATCH] ARM: mxs: remove duplicated include from mach-mxs.c   Shawn Guo
• [PATCH V3] ARM: mxs: Update DENX M28 machine and dts file   Shawn Guo
• [PATCH v2 1/7] mfd: add syscon driver based on regmap   Shawn Guo
• [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Shawn Guo
• [PATCH 0/2] tty: serial: imx: fix lockup and garbage on SMP   Shawn Guo
• [PATCH 1/2] tty: serial: imx: console write routing is unsafe on SMP   Shawn Guo
• [PATCH v2 1/2] imx6q: pwm: Add device tree support   Shawn Guo
• [PATCH v2 2/2] Enable Stop_enable mode during configuration of pwm.   Shawn Guo
• [PATCH 0/2] tty: serial: imx: fix lockup and garbage on SMP   Shawn Guo
• [PATCH 4/4] ARM: mxs: Add SchulerControl SPS1 DTS file   Shawn Guo
• [PATCH 1/3] ARM: mx28evk: Add SPI flash support   Shawn Guo
• [PATCH] clk: mxs: Register USB clocks for mx23   Shawn Guo
• [PATCH 0/2] mmc: mxs-mmc: fix deadlocks   Shawn Guo
• [PATCH] ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board   Shawn Guo
• i.MX pwm patches   Shawn Guo
• [PATCH 5/9] pwm i.MX: add devicetree support   Shawn Guo
• [PATCH 9/9] pwm i.MX: add devicetree support   Shawn Guo
• [PATCH 8/9] ARM i.MX53: Add pwms to dtsi   Shawn Guo
• [PATCH 8/9] ARM i.MX53: Add pwms to dtsi   Shawn Guo
• [PATCH v4 1/7] mfd: add syscon driver based on regmap   Shawn Guo
• [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver   Shawn Guo
• [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Shawn Guo
• [PATCH v2 2/2] tty: serial: imx: don't reinit clock in imx_setup_ufcr()   Shawn Guo
• [PATCH] spi/imx: set the inactive state of the clock according to the clock polarity   Shawn Guo
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH v3 0/3] Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH] omap: remoteproc: set bootaddr support   Juan Gutierrez
• For physical memory management, why take holes page as free pages?   Li Haifeng
• For physical memory management, why take holes page as free pages?   Li Haifeng
• For physical memory management, why take holes page as free pages?   Li Haifeng
• For buddy system initialization, the holes between banks adjacent will be released to buddy allocator?   Li Haifeng
• For buddy system initialization, the holes between banks adjacent will be released to buddy allocator?   Li Haifeng
• For buddy system initialization, the holes between banks adjacent will be released to buddy allocator?   Li Haifeng
• [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller   Jingoo Han
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Jingoo Han
• [PATCH 0/4] clk: Convert ARM ux500 to common clock   Ulf Hansson
• [PATCH 1/4] clk: ux500: Adapt PRCMU and PRCC clocks for common clk   Ulf Hansson
• [PATCH 2/4] clk: ux500: First version of clock definitions for ux500   Ulf Hansson
• [PATCH 3/4] clk: ux500: Clock definitions for u8500   Ulf Hansson
• [PATCH 4/4] ARM: ux500: Switch to use common clock framework   Ulf Hansson
• [PATCH 1/4] clk: ux500: Adapt PRCMU and PRCC clocks for common clk   Ulf Hansson
• [PATCH V2 0/4] clk: Convert ARM ux500 to common clock   Ulf Hansson
• [PATCH V2 1/4] clk: ux500: Adapt PRCMU and PRCC clocks for common clk   Ulf Hansson
• [PATCH V2 2/4] clk: ux500: First version of clock definitions for ux500   Ulf Hansson
• [PATCH V2 3/4] clk: ux500: Clock definitions for u8500   Ulf Hansson
• [PATCH V2 4/4] ARM: ux500: Switch to use common clock framework   Ulf Hansson
• [PATCH 0/4] clk: Support for smp_twd clock for ux500   Ulf Hansson
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Ulf Hansson
• [PATCH 2/4] clk: ux500: Support for prmcu_rate clock   Ulf Hansson
• [PATCH 3/4] mfd: dbx500: Provide a more accurate smp_twd clock   Ulf Hansson
• [PATCH 4/4] clk: ux500: Define smp_twd clock for u8500   Ulf Hansson
• [GIT PULL] Update LZO compression   Mitch Harder
• [PATCH v6 0/3] Updated Cortex-M3 series   Shiraz Hashim
• [PATCH v4 1/3] USB: chipidea: add imx usbmisc support   Sascha Hauer
• [PATCH v2 2/3] mtd: nand: Let MTD_NAND_GPMI_NAND depend on MXS_DMA   Sascha Hauer
• [PATCH v5 0/3] imx: add usbmisc support   Sascha Hauer
• [PATCH 1/2] ARM: i.MX35: Add kernel oftree support   Sascha Hauer
• [PATCH 2/2] ARM: imx/pcm043: add oftree support   Sascha Hauer
• [PATCH 1/2] ARM: mx27pdk: Add audio support   Sascha Hauer
• [PATCH v2] Visstrim SM10: Use mo_version to decide board video mode.   Sascha Hauer
• [PATCH 1/2] ARM: imx: enable emi_slow_gate clock for imx5   Sascha Hauer
• [PATCH 2/2 v2] i.MX27: Visstrim_M10: Add support for deinterlacing driver.   Sascha Hauer
• [PATCH] arm imx31: add a few pinmux settings the tt01 needs   Sascha Hauer
• [PATCH] ARM: dts: imx27-3ds.dts: Fix serial console node   Sascha Hauer
• [PATCH] ARM: imx35: don't disable the uart clock when DEBUG_LL is in use   Sascha Hauer
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Sascha Hauer
• [GIT PULL] i.MX fixes for 3.6-rc   Sascha Hauer
• Vacations.   Sascha Hauer
• [PATCH 2/2] ARM: only build ssi-fiq.S et al if CONFIG_SND_IMX_SOC_PCM_FIQ is selected   Sascha Hauer
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Sascha Hauer
• [PATCH 3/9] [media] mx1_camera: Don't use {en,dis}able_fiq() calls   Sascha Hauer
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Sascha Hauer
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Sascha Hauer
• imx6q restart is broken   Sascha Hauer
• [PATCH] ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support   Sascha Hauer
• [PATCH] ARM: dts: imx: Move SDMA firmware to SoC dtsi file   Sascha Hauer
• [PATCH] ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support   Sascha Hauer
• [PATCH] ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR   Sascha Hauer
• [PATCH] ARM: plat-mxc: Remove unused imx_ioremap   Sascha Hauer
• Lockups reading from i.MX51 SSI registers   Sascha Hauer
• Lockups reading from i.MX51 SSI registers   Sascha Hauer
• [PATCH] Allow memblock steal operations to remove memory from anywhere   Sascha Hauer
• [GIT PULL 0/3] arm-soc updates   Sascha Hauer
• [PATCH 1/2] ARM: mx27pdk: Add audio support   Sascha Hauer
• [PATCH] ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible   Sascha Hauer
• [PATCH] ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible   Sascha Hauer
• [PATCH] ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible   Sascha Hauer
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Sascha Hauer
• [PATCH v2 0/2] imx6q: pwm: Activate stop_mode and configure pinmux   Sascha Hauer
• [PATCH] ARM i.MX: remove duplicated include from clk-imx21.c   Sascha Hauer
• [PATCH] imx21ads : avoid overlapping static i/o mappings   Sascha Hauer
• [PATCH] pwm-imx: Fix config / enable / disable   Sascha Hauer
• [PATCH 1/2] ARM: clk-imx35: Fix SSI clock registration   Sascha Hauer
• [PATCH v2 2/2] ARM: clk-imx25: Fix SSI clock registration   Sascha Hauer
• [PATCH v3] Visstrim SM10: Use mo_version to decide board video mode.   Sascha Hauer
• [PATCH v2 1/2] ARM: clk-imx35: Fix SSI clock registration   Sascha Hauer
• [PATCH] ARM: imx: fix imx51 babbage SD2 CD/WP   Sascha Hauer
• [PATCH] media: mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.   Sascha Hauer
• i.MX pwm patches   Sascha Hauer
• [PATCH 1/9] pwm i.MX: factor out SoC specific functions   Sascha Hauer
• [PATCH 2/9] pwm i.MX: remove unnecessary if in pwm_[en|dis]able   Sascha Hauer
• [PATCH 3/9] pwm i.MX: add functions to enable/disable pwm.   Sascha Hauer
• [PATCH 4/9] pwm i.MX: Use module_platform_driver   Sascha Hauer
• [PATCH 5/9] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 6/9] pwm i.MX: use per clock unconditionally   Sascha Hauer
• [PATCH 7/9] pwm i.MX: fix clock lookup   Sascha Hauer
• [PATCH 8/9] ARM i.MX53: Add pwms to dtsi   Sascha Hauer
• [PATCH 9/9] pwm i.MX: add devicetree support   Sascha Hauer
• [PATCH 1/2] ARM: clk-imx35: Fix SSI clock registration   Sascha Hauer
• [PATCH] ARM: imx27-phytec-phycore: Fix I2C EEPROM address   Sascha Hauer
• [PATCH resend] i.MX53 Nand support   Sascha Hauer
• [PATCH 1/4] mtd nand mxc_nand: Use managed resources   Sascha Hauer
• [PATCH 2/4] mtd nand mxc_nand: swap iomem resource order   Sascha Hauer
• [PATCH 3/4] mtd nand mxc_nand: add i.MX53 support   Sascha Hauer
• [PATCH 4/4] ARM i.MX5: Add nand oftree support   Sascha Hauer
• mxc_nand.c on mach-imx/imx53   Sascha Hauer
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Sascha Hauer
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Sascha Hauer
• [PATCH resend] i.MX53 Nand support   Sascha Hauer
• i.MX pwm patches   Sascha Hauer
• [PATCH 8/9] ARM i.MX53: Add pwms to dtsi   Sascha Hauer
• [PATCH] ASoC: Davinci: McASP: remove unused header include   Hebbar, Gururaja
• [PATCH] ASoC: Davinci: McASP: Flush the FIFO before enabling   Hebbar, Gururaja
• [PATCH] ASoC: McASP: Convert driver to use Runtime PM API   Hebbar, Gururaja
• [PATCH 0/5] ARM/ASoC: Davinci: Add Device Tree Support   Hebbar, Gururaja
• [PATCH 1/5] ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific   Hebbar, Gururaja
• [PATCH 2/5] ASoC: Davinci: McASP: add device tree support for McASP   Hebbar, Gururaja
• [PATCH 3/5] ASoC: Davinci: pcm: Add device tree bindings   Hebbar, Gururaja
• [PATCH 4/5] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH 5/5] ASoC: tlv320aic3x: Add device tree bindings   Hebbar, Gururaja
• [PATCHv6 14/24] i2c: omap: always return IRQ_HANDLED   Hebbar, Gururaja
• [PATCH 1/5] ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific   Hebbar, Gururaja
• [PATCH 5/5] ASoC: tlv320aic3x: Add device tree bindings   Hebbar, Gururaja
• [PATCH 4/5] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH v2 1/3] dmaengine: add TI EDMA DMA engine driver   Hebbar, Gururaja
• [PATCH 1/5] ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific   Hebbar, Gururaja
• [PATCH 3/5] ASoC: Davinci: pcm: Add device tree bindings   Hebbar, Gururaja
• [PATCH 3/5] ASoC: Davinci: pcm: Add device tree bindings   Hebbar, Gururaja
• [PATCH 2/5] ASoC: Davinci: McASP: add device tree support for McASP   Hebbar, Gururaja
• [alsa-devel] [PATCH 14/17] ARM: ux500: Rename MSP board file to something more meaningful   Hebbar, Gururaja
• [alsa-devel] [PATCH 14/17] ARM: ux500: Rename MSP board file to something more meaningful   Hebbar, Gururaja
• [PATCH V2 0/6] ARM/ASoC: Davinci: Add Device Tree Support   Hebbar, Gururaja
• [PATCH V2 1/6] ASoC: davinci: davinci-pcm does not need to be a plaform_driver   Hebbar, Gururaja
• [PATCH V2 2/6] ARM: Davinci: Remove references to davinci pcm   Hebbar, Gururaja
• [PATCH V2 3/6] ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific   Hebbar, Gururaja
• [PATCH V2 4/6] ASoC: Davinci: McASP: add device tree support for McASP   Hebbar, Gururaja
• [PATCH V2 5/6] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH V2 6/6] ASoC: tlv320aic3x: Add device tree bindings   Hebbar, Gururaja
• [PATCH V3] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH V2 5/6] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [alsa-devel] [PATCH V2 1/6] ASoC: davinci: davinci-pcm does not need to be a plaform_driver   Hebbar, Gururaja
• [PATCH V3] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH V3] ASoC: Davinci: machine: Add device tree binding   Hebbar, Gururaja
• [PATCH 0/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [PATCH 1/3] ASoC: Davinci: McASP: add support new McASP IP Variant   Hebbar, Gururaja
• [PATCH 2/3] ASoC: Davinci: pcm: add support for sram-support-less platforms   Hebbar, Gururaja
• [PATCH 3/3] ASoC: Davinci: evm: Fix typo in cpu dai name   Hebbar, Gururaja
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [PATCH v3 05/10] resource: add PCI configuration space support   Bjorn Helgaas
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v3 05/10] resource: add PCI configuration space support   Bjorn Helgaas
• [PATCH v3 05/10] resource: add PCI configuration space support   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH 01/24] arm: initial Xen support   Rob Herring
• [PATCH v2 0/5] Use more asm-generic headers   Rob Herring
• [PATCH v2 1/5] ARM: use generic version of identical asm headers   Rob Herring
• [PATCH v2 2/5] ARM: add strstr declaration for decompressors   Rob Herring
• [PATCH v2 3/5] ARM: use generic unaligned.h   Rob Herring
• [PATCH v2 4/5] ARM: use generic termios.h   Rob Herring
• [PATCH v2 5/5] ARM: convert asm/irqflags.h to use asm-generic/irqflags.h   Rob Herring
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Rob Herring
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Rob Herring
• [PATCH] ARM: AM33XX: board-generic: Add of_dev_auxdata to fix dev_id for CAN module   Rob Herring
• [PATCH] ARM: AM33XX: board-generic: Add of_dev_auxdata to fix dev_id for CAN module   Rob Herring
• Platform data from devicetree   Rob Herring
• [RFC PATCH] ARM: add coherent dma ops   Rob Herring
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Rob Herring
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Rob Herring
• [PATCH 2/9] ARM: perf: add devicetree bindings for 11MPcore, A5, A7 and A15 PMUs   Rob Herring
• [PATCH 2/2] ARM: local timers: add timer support using IO mapped register   Rob Herring
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Rob Herring
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Rob Herring
• [RFC PATCH] ARM: add coherent dma ops   Rob Herring
• [PATCH 0/4] Per device coherent DMA map ops   Rob Herring
• [PATCH 1/4] ARM: add coherent dma ops   Rob Herring
• [PATCH 2/4] ARM: add coherent iommu dma ops   Rob Herring
• [PATCH 3/4] ARM: kill off arch_is_coherent   Rob Herring
• [PATCH 4/4] ARM: highbank: add coherent DMA setup   Rob Herring
• imx6q restart is broken   Rob Herring
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Rob Herring
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• [PATCH 0/4] Per device coherent DMA map ops   Rob Herring
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Rob Herring
• [PATCH] serial: pl011: honour serial aliases in device tree   Rob Herring
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Rob Herring
• Cortex A9 with ACP needing mixed coherency model   Rob Herring
• [PATCH 1/4] [RFC] ARM: autogenerate mach-foo/* and plat-foo/* header redirects   Rob Herring
• [PATCH 0/4] [RFC] ARM: multiplatform: rename all mach headers   Rob Herring
• [RFC PATCH] ARM: initial multiplatform support   Rob Herring
• [RFC PATCH] ARM: initial multiplatform support   Rob Herring
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Rob Herring
• [GIT PULL] io.h clean-up for PCI   Rob Herring
• [PATCH] ARM: highbank: add a defconfig   Rob Herring
• [PATCH 00/10] Make mach/gpio.h optional   Rob Herring
• [PATCH 01/10] usb: pxa27x_udc: remove IRQ_USB define   Rob Herring
• [PATCH 02/10] gpio: pxa: add explicit includes for cpu_is_X macros   Rob Herring
• [PATCH 03/10] serial: atmel: add explict mach/gpio.h include   Rob Herring
• [PATCH 04/10] net: pxaficp_ir: add explicit mach/gpio.h includes   Rob Herring
• [PATCH 05/10] ARM: at91: explicitly include mach/gpio.h   Rob Herring
• [PATCH 06/10] ARM: shmobile: explicitly include mach/gpio.h   Rob Herring
• [PATCH 07/10] ARM: orion: add explict mach/gpio.h includes   Rob Herring
• [PATCH 08/10] ARM: omap2: add explict mach/gpio.h includes   Rob Herring
• [PATCH 09/10] ARM: omap1: add explict mach/gpio.h includes   Rob Herring
• [PATCH 10/10] ARM: make mach/gpio.h headers optional   Rob Herring
• [PATCH 0/6] Initial multi-platform support   Rob Herring
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Rob Herring
• [PATCH 2/6] ARM: introduce Kconfig.mach   Rob Herring
• [PATCH 3/6] ARM: picoxcell: header fixes for multi-platform   Rob Herring
• [PATCH 4/6] ARM: vexpress: remove dependency on mach/* headers   Rob Herring
• [PATCH 5/6] ARM: initial multiplatform support   Rob Herring
• [PATCH 6/6] ARM: update defconfigs   Rob Herring
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Rob Herring
• [PATCH 00/10] Make mach/gpio.h optional   Rob Herring
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Rob Herring
• [PATCH 03/10] serial: atmel: add explict mach/gpio.h include   Rob Herring
• [PATCH 0/9] Clean up hardcoded IRQs for mach-omap2, enable SPARSE_IRQ, plaform_data/gpio-omap.h   Rob Herring
• [PATCH 2/8] irqdomain: Take interrupt-parent property into account if specified   Rob Herring
• [PATCH v2] ARM: initial multiplatform support   Rob Herring
• [PATCH 1/3] ARM: move debug macros to common location   Rob Herring
• [PATCH 2/3] ARM: highbank: move debug macros to include/debug   Rob Herring
• [PATCH 3/3] ARM: vexpress: move debug macros to include/debug   Rob Herring
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Rob Herring
• [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver   Sebastian Hesselbarh
• [PATCH 1/1] ARM: kirkwood: fix typo in Makefile.boot   Sebastian Hesselbarth
• [PATCH 1/2] ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar   Sebastian Hesselbarth
• [PATCH 2/2] ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar   Sebastian Hesselbarth
• [PATCH 0/6] ARM: dove: DT support for Marvell Dove   Sebastian Hesselbarth
• [PATCH 1/6] ARM: dove: unify clock setup   Sebastian Hesselbarth
• [PATCH 2/6] ARM: dove: add clock gating control   Sebastian Hesselbarth
• [PATCH 3/6] ARM: dove: add crypto engine   Sebastian Hesselbarth
• [PATCH 4/6] ARM: dove: add device tree based machine descriptor   Sebastian Hesselbarth
• [PATCH 5/6] ARM: dove: add device tree descriptors   Sebastian Hesselbarth
• [PATCH 6/6] ARM: dove: SolidRun CuBox DT   Sebastian Hesselbarth
• [PATCH 0/6] ARM: dove: DT support for Marvell Dove   Sebastian Hesselbarth
• [PATCH 0/6] ARM: dove: DT support for Marvell Dove   Sebastian Hesselbarth
• [PATCH 1/6] ARM: dove: unify clock setup   Sebastian Hesselbarth
• [PATCH v2 0/6] ARM: dove: DT support for Marvell Dove   Sebastian Hesselbarth
• [PATCH v2 1/6] ARM: dove: unify clock setup   Sebastian Hesselbarth
• [PATCH v2 2/6] ARM: dove: add clock gating control   Sebastian Hesselbarth
• [PATCH v2 3/6] ARM: dove: add crypto engine   Sebastian Hesselbarth
• [PATCH v2 4/6] ARM: dove: add device tree based machine descriptor   Sebastian Hesselbarth
• [PATCH v2 5/6] ARM: dove: add device tree descriptors   Sebastian Hesselbarth
• [PATCH v2 6/6] ARM: dove: SolidRun CuBox DT   Sebastian Hesselbarth
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Sebastian Hesselbarth
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver   Sebastian Hesselbarth
• [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver   Sebastian Hesselbarth
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Sebastian Hesselbarth
• [PATCH 05/11] pinctrl: mvebu: add pinctrl driver for Armada XP   Sebastian Hesselbarth
• [PATCH 06/11] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Sebastian Hesselbarth
• [PATCH 07/11] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Sebastian Hesselbarth
• [PATCH 08/11] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Sebastian Hesselbarth
• [PATCH 09/11] ARM: mvebu: adjust Armada XP evaluation board DTS   Sebastian Hesselbarth
• [PATCH 10/11] arm: mvebu: enable PINCTRL usage   Sebastian Hesselbarth
• [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig   Sebastian Hesselbarth
• [PATCH v2 1/2] ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar   Sebastian Hesselbarth
• [PATCH v2 2/2] ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar   Sebastian Hesselbarth
• [PATCH v3 0/6] ARM: dove: DT support for Marvell Dove   Sebastian Hesselbarth
• [PATCH v3 1/6] ARM: dove: unify clock setup   Sebastian Hesselbarth
• [PATCH v3 2/6] ARM: dove: add clock gating control   Sebastian Hesselbarth
• [PATCH v3 3/6] ARM: dove: add crypto engine   Sebastian Hesselbarth
• [PATCH v3 4/6] ARM: dove: add device tree based machine descriptor   Sebastian Hesselbarth
• [PATCH v3 5/6] ARM: dove: add device tree descriptors   Sebastian Hesselbarth
• [PATCH v3 6/6] ARM: dove: SolidRun CuBox DT   Sebastian Hesselbarth
• [PATCH v2 1/2] ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar   Sebastian Hesselbarth
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig   Sebastian Hesselbarth
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Sebastian Hesselbarth
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Sebastian Hesselbarth
• [v3] Add basic address decoding support for Marvell 370/XP   Sebastian Hesselbarth
• [v3] Add basic address decoding support for Marvell 370/XP   Sebastian Hesselbarth
• [PATCH v2 0/9] pinctrl: mvebu: pinctrl driver   Sebastian Hesselbarth
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH v2 2/9] pinctrl: mvebu: dove pinctrl driver   Sebastian Hesselbarth
• [PATCH v2 3/9] pinctrl: mvebu: kirkwood pinctrl driver   Sebastian Hesselbarth
• [PATCH v2 4/9] pinctrl: mvebu: add pinctrl driver for Armada 370   Sebastian Hesselbarth
• [PATCH v2 5/9] pinctrl: mvebu: add pinctrl driver for Armada XP   Sebastian Hesselbarth
• [PATCH v2 6/9] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Sebastian Hesselbarth
• [PATCH v2 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Sebastian Hesselbarth
• [PATCH v2 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Sebastian Hesselbarth
• [PATCH v2 9/9] ARM: mvebu: adjust Armada XP evaluation board DTS   Sebastian Hesselbarth
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH 1/1] clk: add DT support for clock gating control   Sebastian Hesselbarth
• [PATCH 3/6] arm: cache-l2x0: add support for Aurora L2 cache ctrl   Sebastian Hesselbarth
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Sebastian Hesselbarth
• [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver   Sebastian Hesselbarth
• [PATCH] mtd: orion_nand: remove <mach/hardware.h> include   Sebastian Hesselbarth
• [PATCH] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"   Kevin Hilman
• DSS and USBHOST powerdomains not entering low-power states on 37xx EVM   Kevin Hilman
• [PATCHv4 2/8] ARM: OMAP3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking   Kevin Hilman
• [PATCHv4 4/8] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting   Kevin Hilman
• [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error   Kevin Hilman
• [PATCH] ARM: OMAP2+: Fix dmtimer set source clock failure   Kevin Hilman
• [PATCH] Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain"   Kevin Hilman
• DSS and USBHOST powerdomains not entering low-power states on 37xx EVM   Kevin Hilman
• nfsroot problems with v3.6-rc1 on 37xx EVM and dynamic off-mode   Kevin Hilman
• [PATCH 1/3] ARM: OMAP: omap_device: keep track of driver bound status   Kevin Hilman
• [PATCH] Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain"   Kevin Hilman
• [PATCH v2] Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain"   Kevin Hilman
• [linux-pm] [PATCH 4/4] PM: cleanup: stop mandating that platforms export (pm_idle)()   Kevin Hilman
• [PATCH v2] Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain"   Kevin Hilman
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   Kevin Hilman
• [PATCH] ARM: OMAP4: sleep: Save the complete used register stack frame   Kevin Hilman
• [PATCH 2/2] ARM: OMAP4: Register the OPP table only for 4430 device   Kevin Hilman
• [PATCH 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Kevin Hilman
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Kevin Hilman
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   Kevin Hilman
• [PATCH v2 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Kevin Hilman
• [PATCH 2/2] ARM: OMAP4: Register the OPP table only for 4430 device   Kevin Hilman
• [PATCH v2 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Kevin Hilman
• [GIT PULL] ARM: OMAP: PM fixes for v3.6-rc   Kevin Hilman
• [PATCH v2 0/3] ARM: OMAP: omap_device: track driver bound status   Kevin Hilman
• [PATCH v2 1/3] ARM: OMAP: omap_device: keep track of driver bound status   Kevin Hilman
• [PATCH v2 2/3] ARM: OMAP: omap_device: don't attempt late suspend if no driver bound   Kevin Hilman
• [PATCH v2 3/3] ARM: OMAP: omap_device: idle devices with no driver bound   Kevin Hilman
• [PATCH 0/2] mmc: mxs-mmc: fix deadlocks   Lauri Hintsala
• omap_device: query on "fck" clk alias created   Vaibhav Hiremath
• omap_device: query on "fck" clk alias created   Hiremath, Vaibhav
• omap_device: query on "fck" clk alias created   Hiremath, Vaibhav
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Vaibhav Hiremath
• [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence   Vaibhav Hiremath
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Hiremath, Vaibhav
• omap_device: query on "fck" clk alias created   Hiremath, Vaibhav
• [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data   Vaibhav Hiremath
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Hiremath, Vaibhav
• [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data   Vaibhav Hiremath
• am33xx: default to status = "disabled"?   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Hiremath, Vaibhav
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Hiremath, Vaibhav
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   Vaibhav Hiremath
• [PATCH] arm: OMAP3+: am33xx: Add new clk node entry for d_can modules   Vaibhav Hiremath
• [PATCH] ARM: AM33XX: board-generic: Add of_dev_auxdata to fix dev_id for CAN module   Vaibhav Hiremath
• [PATCH-V3] ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2   Vaibhav Hiremath
• [PATCH] ARM: AM33XX: board-generic: Add of_dev_auxdata to fix dev_id for CAN module   Hiremath, Vaibhav
• [PATCH] ARM: AM33XX: board-generic: Add of_dev_auxdata to fix dev_id for CAN module   Hiremath, Vaibhav
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   Hiremath, Vaibhav
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Hiremath, Vaibhav
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Vaibhav Hiremath
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Vaibhav Hiremath
• [PATCH] ARM: AM33XX: board-generic: Add of_dev_auxdata to fix dev_id for CAN module   Vaibhav Hiremath
• [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state   Vaibhav Hiremath
• [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Hiremath, Vaibhav
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Hiremath, Vaibhav
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Hiremath, Vaibhav
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Hiremath, Vaibhav
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions   Vaibhav Hiremath
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention   Vaibhav Hiremath
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Vaibhav Hiremath
• [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes   Vaibhav Hiremath
• [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case   Vaibhav Hiremath
• [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes   Vaibhav Hiremath
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Hiremath, Vaibhav
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Hiremath, Vaibhav
• [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM   Vaibhav Hiremath
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Vaibhav Hiremath
• [PATCH v4 0/3] Prepare for OMAP2+ movement to Common Clk   Vaibhav Hiremath
• [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   Vaibhav Hiremath
• Without MACH_ option Early printk (DEBUG_LL)   Vaibhav Hiremath
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Hiremath, Vaibhav
• Without MACH_ option Early printk (DEBUG_LL)   Hiremath, Vaibhav
• Without MACH_ option Early printk (DEBUG_LL)   Hiremath, Vaibhav
• Without MACH_ option Early printk (DEBUG_LL)   Hiremath, Vaibhav
• Without MACH_ option Early printk (DEBUG_LL)   Hiremath, Vaibhav
• [PATCH] ARM: OMAP2+: Makefile.boot: Add am335x evm and bone targets   Vaibhav Hiremath
• [PATCH 0/2] Renesas IPMMU driver for sh7372   Damian Hobson-Garcia
• [PATCH 0/2] Renesas IPMMU driver for sh7372   Simon Horman
• No subject   Simon Horman
• [PATCH 1/2] ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions   Simon Horman
• [PATCH 2/2] ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: Armadillo800EVA for 3.7   Simon Horman
• New Renesas Tree   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: KZM-9A-GT for 3.7   Simon Horman
• [PATCH] ARM: shmobile: kzm9g: enable restarting   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: Core for 3.7   Simon Horman
• [PATCH] ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs'   Simon Horman
• [PATCH] ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs'   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC: Core for 3.7   Simon Horman
• [PATCH] ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs'   Simon Horman
• [GIT PULL] Renesas ARM-based SoC fix for v3.6   Simon Horman
• [PATCH] ARM: shmobile: marzen: fixup smsc911x id for regulator   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: KZM-9A-GT for 3.7   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: KZM-A9-GT for 3.7 #2   Simon Horman
• [PATCH] ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: r8a7740 SoC for 3.7   Simon Horman
• [PATCH] ARM: shmobile: r8a7740: add USB24 clock explain and sample code   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7   Simon Horman
• [PATCH 01/10] r8a7779: add SDHI clock support   Simon Horman
• [PATCH 02/10] marzen: add SDHI0 support   Simon Horman
• [PATCH 03/10] ARM: mach-shmobile: marzen: defconfig update   Simon Horman
• [PATCH 04/10] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx   Simon Horman
• [PATCH 05/10] ARM: shmobile: r8a7779: add USB common phy initializer   Simon Horman
• [PATCH 06/10] ARM: shmobile: r8a7779: add USB EHCI clock support   Simon Horman
• [PATCH 07/10] ARM: shmobile: r8a7779: add USB OHCI clock support   Simon Horman
• [PATCH 08/10] ARM: shmobile: marzen: add USB EHCI driver support   Simon Horman
• [PATCH 09/10] ARM: shmobile: marzen: fixup regulator id for smsc911x   Simon Horman
• [PATCH 10/10] ARM: shmobile: marzen: enable thermal sensor   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7   Simon Horman
• [PATCH 01/11] r8a7779: add SDHI clock support   Simon Horman
• [PATCH 02/11] marzen: add SDHI0 support   Simon Horman
• [PATCH 03/11] ARM: mach-shmobile: marzen: defconfig update   Simon Horman
• [PATCH 04/11] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx   Simon Horman
• [PATCH 05/11] ARM: shmobile: r8a7779: add USB common phy initializer   Simon Horman
• [PATCH 06/11] ARM: shmobile: r8a7779: add USB EHCI clock support   Simon Horman
• [PATCH 07/11] ARM: shmobile: r8a7779: add USB OHCI clock support   Simon Horman
• [PATCH 08/11] ARM: shmobile: marzen: add USB EHCI driver support   Simon Horman
• [PATCH 09/11] ARM: shmobile: marzen: fixup regulator id for smsc911x   Simon Horman
• [PATCH 10/11] ARM: shmobile: marzen: enable thermal sensor   Simon Horman
• [PATCH 11/11] ARM: shmobile: marzen: add USB OHCI driver support   Simon Horman
• [PATCH] ARM: mach-shmobile: remove duplicated include from board-ag5evm.c   Simon Horman
• [GIT PULL v2] Renesas ARM-based SoC: Marzen and r8a7779 for 3.7   Simon Horman
• [GIT PULL] Renesas ARM-based SoC: AG5EVM for 3.7   Simon Horman
• [PATCH] ARM: mach-shmobile: remove duplicated include from board-ag5evm.c   Simon Horman
• [RFC][PATCH] Disintegrate sharpsl_param.c   Cyril Hrubis
• Shutdown problem in SMP system happened on Tegra20   Bill Huang
• Shutdown problem in SMP system happened on Tegra20   Bill Huang
• Shutdown problem in SMP system happened on Tegra20   Bill Huang
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Jon Hunter
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Jon Hunter
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH V2 01/10] ARM: PMU: Add runtime PM Support   Jon Hunter
• [PATCH 1/9] ARM: PMU: Add runtime PM Support   Jon Hunter
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Jon Hunter
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Jon Hunter
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Jon Hunter
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Jon Hunter
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Jon Hunter
• gpmc generic retime function (subject was RE: [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration)   Jon Hunter
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Jon Hunter
• [PATCH v6 05/10] ARM: OMAP2+: gpmc: find features by ip rev check   Jon Hunter
• [PATCH v6 06/10] ARM: OMAP2+: gpmc: remove cs# in sync clk div calc   Jon Hunter
• [PATCH v6 07/10] ARM: OMAP2+: gpmc: generic timing calculation   Jon Hunter
• [PATCH v6 07/10] ARM: OMAP2+: gpmc: generic timing calculation   Jon Hunter
• [PATCH v2] ARM: Build dtb files in all target   Ben Hutchings
• [PATCH v3 0/2] omap: add ocp2scp as a bus driver   Kishon Vijay Abraham I
• [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp   Kishon Vijay Abraham I
• [PATCH v3 2/2] arm/dts: omap4: Add ocp2scp data   Kishon Vijay Abraham I
• [PATCH v7 0/7] omap: musb: Add device tree support   Kishon Vijay Abraham I
• [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy   Kishon Vijay Abraham I
• [PATCH v7 2/7] arm: omap: hwmod: add a new addr space in otg for writing to control module   Kishon Vijay Abraham I
• [PATCH v7 3/7] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Kishon Vijay Abraham I
• [PATCH v7 4/7] drivers: usb: twl6030: Add dt support for twl6030 usb   Kishon Vijay Abraham I
• [PATCH v7 5/7] drivers: usb: twl4030: Add device tree support for twl4030 usb   Kishon Vijay Abraham I
• [PATCH v7 6/7] drivers: usb: musb: Add device tree support for omap musb glue   Kishon Vijay Abraham I
• [PATCH v7 7/7] arm: omap: phy: remove unused functions from omap-phy-internal.c   Kishon Vijay Abraham I
• [PATCH 0/4] arm/dts: omap: add dt data for MUSB   Kishon Vijay Abraham I
• [PATCH 1/4] arm/dts: omap: Add omap-usb2 dt data   Kishon Vijay Abraham I
• [PATCH 2/4] arm/dts: Add twl6030-usb data   Kishon Vijay Abraham I
• [PATCH 3/4] arm/dts: Add twl4030-usb data   Kishon Vijay Abraham I
• [PATCH 4/4] arm/dts: omap: Add usb_otg and glue data   Kishon Vijay Abraham I
• [PATCH v4 0/2] omap: add ocp2scp as a bus driver   Kishon Vijay Abraham I
• [PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp   Kishon Vijay Abraham I
• [PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data   Kishon Vijay Abraham I
• [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver   Kishon Vijay Abraham I
• [RESEND PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp   Kishon Vijay Abraham I
• [RESEND PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data   Kishon Vijay Abraham I
• [PATCH v2] Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain"   Grazvydas Ignotas
• [PATCH 1/2] ARM: pgtable: add pgprot_writethrough() macro   Grazvydas Ignotas
• ARM hugetlb support?   Grazvydas Ignotas
• ARM hugetlb support?   Grazvydas Ignotas
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Takashi Iwai
• [alsa-devel] [PATCH 03/22] ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements   Takashi Iwai
• [alsa-devel] [PATCH 08/22] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Takashi Iwai
• [PATCH 5/13] arch/arm: use clk_prepare_enable and clk_disable_unprepare   Pankaj Jangra
• [PATCH v2 1/4] [RFC] clk: new locking scheme for reentrancy   Pankaj Jangra
• [PATCH 1/3] rtc: avoid cpuid checking in pxa-rtc   Jett.Zhou
• [PATCH 2/3] rtc: use __devinit instead on pxa-rtc   Jett.Zhou
• [PATCH 3/3] rtc: pxa: convert to use module_platform_driver()   Jett.Zhou
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Olof Johansson
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Olof Johansson
• [GIT PULL][for 3.6] pull request from board branch in pxa git tree   Olof Johansson
• [PATCH] ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes   Olof Johansson
• [GIT PULL] [for 3.6] pull request from dt-pxa branch in pxa git tree   Olof Johansson
• [PATCH] arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs   Olof Johansson
• [GIT PULL][for 3.6] pull request from board branch in pxa git tree   Olof Johansson
• [GIT PULL 0/3] ARM: late-arrived arm-soc branches for 3.6   Olof Johansson
• [GIT PULL 1/3] ARM: SoC fixes   Olof Johansson
• [GIT PULL 2/3] ARM: arm-soc: cpuidle enablement for OMAP   Olof Johansson
• [GIT PULL 3/3] ARM: arm-soc Marvell Orion device-tree updates   Olof Johansson
• [GIT PULL][for 3.7] pull request from dt-mmp branch in pxa git tree   Olof Johansson
• Re: 회신: [PATCH] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Olof Johansson
• Kernels on Bad Firmware (was Re: kernel entry for thumb2-only cpus)   Olof Johansson
• [GIT PULL 0/3] arm-soc updates   Olof Johansson
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Olof Johansson
• [PATCH v2 03/31] arm64: Exception handling   Olof Johansson
• [PATCH v2 07/31] arm64: Process management   Olof Johansson
• [PATCH v2 08/31] arm64: CPU support   Olof Johansson
• [PATCH v2 12/31] arm64: Atomic operations   Olof Johansson
• [PATCH v2 13/31] arm64: Device specific operations   Olof Johansson
• [PATCH v2 14/31] arm64: DMA mapping API   Olof Johansson
• [PATCH v2 15/31] arm64: SMP support   Olof Johansson
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Olof Johansson
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Olof Johansson
• [PATCH] ARM: omap: add dtb targets   Olof Johansson
• [RFC PATCH] ARM: initial multiplatform support   Olof Johansson
• Preliminary topic proposals for the ARM mini-summit   Olof Johansson
• [PATCH 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Olof Johansson
• [PATCH v5 1/2] ARM: Make a compile firmware conditionally   Olof Johansson
• [PATCH v5 2/2] ARM: EXYNOS: SMC instruction (aka firmware) support   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC fix for v3.6   Olof Johansson
• [GIT PULL] at91: fixes for 3.6 (take 1 bis)   Olof Johansson
• [GIT PULL] Renesas ARM-based SoC: Armadillo800EVA for 3.7   Olof Johansson
• [PATCH RESEND 2/2] msm: io: Change the default static iomappings to be shared   Olof Johansson
• [GIT PULL] msm fixes for v3.6   Olof Johansson
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Lee Jones
• [PATCH 5/6] ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled   Lee Jones
• [PATCH 3/6] ARM: ux500: Fix merge error, so such struct 'snd_soc_u8500'   Lee Jones
• [PATCH 5/6] ARM: ux500: Enable HIGHMEM on all mop500 platforms   Lee Jones
• [PATCH 3/6] ARM: ux500: Fix merge error, so such struct 'snd_soc_u8500'   Lee Jones
• [PATCH 3/6 v2] ARM: ux500: Fix merge error, no matching driver name for, 'snd_soc_u8500'   Lee Jones
• [PATCH 5/6] ARM: ux500: Enable HIGHMEM on all mop500 platforms   Lee Jones
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Lee Jones
• [PATCH 5/6] ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled   Lee Jones
• [alsa-devel] [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Lee Jones
• [PATCH 17/19] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Lee Jones
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Lee Jones
• [PATCH 18/19] Documentation: Define the MSP Driver Device Tree bindings   Lee Jones
• [alsa-devel] [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Lee Jones
• [PATCH] ARM: ux500: resurrect I2C platform data   Lee Jones
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver   Lee Jones
• [PATCH 0/6] Device Tree IRQ related enablement patches   Lee Jones
• [PATCH 1/6] ARM: ux500: Identify the PRCMU as an interrupt controller   Lee Jones
• [PATCH 2/6] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 3/6] ARM: ux500: Force AB8500 to use the GIC as its interrupt controller   Lee Jones
• [PATCH 4/6] mfd: Use interrupt-parent as IRQ controller if specified in DT   Lee Jones
• [PATCH 5/6] ARM: ux500: Match-up compatible stings with associated MFD cell   Lee Jones
• [PATCH 6/6] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 6/6] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 4/6] mfd: Use interrupt-parent as IRQ controller if specified in DT   Lee Jones
• [PATCH 6/6] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Lee Jones
• [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 1/1 v4] i2c: Add default configuration into the Nomadik I2C driver.   Lee Jones
• [PATCH 04/11] ARM: ux500: really kill snowball_of_platform_devs   Lee Jones
• [PATCH 00/22] mop500 related Audio reorganisation and fixups   Lee Jones
• [PATCH 01/22] ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'   Lee Jones
• [PATCH 02/22] ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled   Lee Jones
• [PATCH 03/22] ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements   Lee Jones
• [PATCH 04/22] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Lee Jones
• [PATCH 05/22] ASoC: Ux500: Enable MOP500 driver for Device Tree   Lee Jones
• [PATCH 06/22] ASoC: Ux500: Enable ux500 MSP driver for Device Tree   Lee Jones
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 08/22] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Lee Jones
• [PATCH 09/22] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Lee Jones
• [PATCH 10/22] Documentation: Define the MSP Driver Device Tree bindings   Lee Jones
• [PATCH 11/22] ARM: ux500: Clean-up MSP platform code   Lee Jones
• [PATCH 12/22] ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree   Lee Jones
• [PATCH 13/22] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Lee Jones
• [PATCH 14/22] ARM: ux500: Pass MSP DMA platform data though AUXDATA   Lee Jones
• [PATCH 15/22] ARM: ux500: Stop registering the MOP500 Audio driver from platform code   Lee Jones
• [PATCH 16/22] ARM: ux500: Stop registering the PCM driver from platform code   Lee Jones
• [PATCH 17/22] ARM: ux500: Remove platform registration of MSP devices   Lee Jones
• [PATCH 18/22] ARM: ux500: Rename MSP board file to something more meaningful   Lee Jones
• [PATCH 19/22] ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the u9500, u8540 and u9540   Lee Jones
• [PATCH 20/22] ARM: ux500: Add nodes for the MSP into Device Tree   Lee Jones
• [PATCH 21/22] ARM: ux500: Add all encompassing sound node to the Snowball Device Tree   Lee Jones
• [PATCH 22/22] Documentation: Add the AB8500 CODEC device to the MFD AB8500 doc   Lee Jones
• [PATCH 0/8] Changes surrounding IRQs and IRQ domains   Lee Jones
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Lee Jones
• [PATCH 2/8] irqdomain: Take interrupt-parent property into account if specified   Lee Jones
• [PATCH 3/8] ARM: ux500: Identify the PRCMU as an interrupt controller   Lee Jones
• [PATCH 4/8] ARM: ux500: Force AB8500 to use the GIC as its interrupt controller   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 6/8] mfd: Use interrupt-parent as IRQ controller if specified in DT   Lee Jones
• [PATCH 7/8] mfd: Use the AB8500's IRQ domain to convert hwirq to virq   Lee Jones
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Lee Jones
• [PATCH 1/1] ARM: ux500: Match Power-On-Key MFD and DTS compatible strings   Lee Jones
• [PATCH 1/1] ARM: ux500: Remove unused snowball_of_platform_devs struct   Lee Jones
• [PATCH 1/1] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Lee Jones
• [PATCH 00/22] mop500 related Audio reorganisation and fixups   Lee Jones
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Lee Jones
• [PATCH 00/22] mop500 related Audio reorganisation and fixups   Lee Jones
• [PATCH 13/22] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Lee Jones
• [PATCH 04/22] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH] mfd: ab8500: Make ab8500_irq_get_virq() static   Lee Jones
• [PATCH 1/1] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Lee Jones
• [PATCH 04/22] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 1/1] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 1/1] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Lee Jones
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Lee Jones
• [PATCH 1/3] ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices   Lee Jones
• [PATCH 2/3] Documentation: Device Tree binding information for i2c-nomadik driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Lee Jones
• [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Lee Jones
• [PATCH 1/1 v2] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Lee Jones
• [PATCH 00/17] MOP500 Audio fix-ups and DT enablement   Lee Jones
• [PATCH 01/17] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Lee Jones
• [PATCH 02/17] ASoC: Ux500: Enable MOP500 driver for Device Tree   Lee Jones
• [PATCH 03/17] ASoC: Ux500: Enable ux500 MSP driver for Device Tree   Lee Jones
• [PATCH 04/17] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Lee Jones
• [PATCH 05/17] ASoC: Ux500: Minor coding layout changes   Lee Jones
• [PATCH 06/17] Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings   Lee Jones
• [PATCH 07/17] Documentation: Define the MSP Driver Device Tree bindings   Lee Jones
• [PATCH 08/17] ARM: ux500: Clean-up MSP platform code   Lee Jones
• [PATCH 09/17] ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree   Lee Jones
• [PATCH 10/17] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Lee Jones
• [PATCH 11/17] ARM: ux500: Pass MSP DMA platform data though AUXDATA   Lee Jones
• [PATCH 12/17] ARM: ux500: Stop registering the MOP500 Audio driver from platform code   Lee Jones
• [PATCH 13/17] ARM: ux500: Remove platform registration of MSP devices   Lee Jones
• [PATCH 14/17] ARM: ux500: Rename MSP board file to something more meaningful   Lee Jones
• [PATCH 15/17] ARM: ux500: Add nodes for the MSP into Device Tree   Lee Jones
• [PATCH 16/17] ARM: ux500: Add all encompassing sound node to the Snowball Device Tree   Lee Jones
• [PATCH 17/17] Documentation: Add the AB8500 CODEC device to the MFD AB8500 doc   Lee Jones
• [PATCH 1/1 v2] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Lee Jones
• [alsa-devel] [PATCH 14/17] ARM: ux500: Rename MSP board file to something more meaningful   Lee Jones
• [alsa-devel] [PATCH 14/17] ARM: ux500: Rename MSP board file to something more meaningful   Lee Jones
• [PATCH 13/22] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Lee Jones
• [PATCH RESEND 1/4] ARM: OMAP2+: AM33XX: Add tps65910 device tree data   Lee Jones
• [PATCH RESEND 1/4] ARM: OMAP2+: AM33XX: Add tps65910 device tree data   Lee Jones
• [PATCH 18/22] ARM: ux500: Rename MSP board file to something more meaningful   Lee Jones
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Lee Jones
• [PATCH 04/22] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Lee Jones
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Lee Jones
• [PATCH 2/8] irqdomain: Take interrupt-parent property into account if specified   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [rtc-linux] [PATCH 1/1] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Lee Jones
• [PATCH] arm/dts: omap5: Add mmc controller nodes and board data   Balaji T K
• [2/3][PATCH][v2] TDM Framework   Greg KH
• [PATCH v3] printk: add option to print cpu id   Greg KH
• [PATCH v3] printk: add option to print cpu id   Greg KH
• [PATCH v3] printk: add option to print cpu id   Greg KH
• [PATCH 08/14] tty: atmel_serial: add pinctrl support   Greg KH
• [PATCH v4 4/4] memory: emif: add device tree support to emif driver   Greg KH
• [PATCH v2] ARM: Build dtb files in all target   Greg KH
• [PATCH] ARM: EXYNOS: Add HDMIPHY I2C adaptor   Sachin Kamat
• [PATCH v2 2/5] usb: s3c-hsotg: Adding phy driver support   Sachin Kamat
• [PATCH 3/4] arm/dts: exynos4: Add DTS file for ODROID-X   Sachin Kamat
• [PATCH v2] arm/dts: exynos4: Add DTS file for ODROID-X   Sachin Kamat
• [PATCH v3 3/4] ARM: EXYNOS: Enable PMUs for exynos4   Sachin Kamat
• [linux-keystone] Re: [PATCH] arm:davinci: clk - migrate to new common clock API   Karicheri, Muralidharan
• [PATCH] arm:davinci: clk - migrate to new common clock API   Karicheri, Muralidharan
• [PATCH] arm:davinci: clk - migrate to new common clock API   Karicheri, Muralidharan
• [PATCH - 2/2] arm: disable caches based on config option   Karicheri, Muralidharan
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Sudeep KarkadaNagesha
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver   Srinidhi Kasagar
• [PATCH] ARM: Exynos4: Turn off clocks for NAND, OneNAND and TSI controllers   Chander Kashyap
• [RFC][PATCH] Disintegrate sharpsl_param.c   Marko Katić
• [RFC][PATCH] Disintegrate sharpsl_param.c   Marko Katić
• [RFC][PATCH] Disintegrate sharpsl_param.c   Marko Katić
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Vasily Khoruzhick
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Vasily Khoruzhick
• [PATCH] ARM: EXYNOS: Add HDMIPHY I2C adaptor   Dongjin Kim
• [PATCH] ARM: EXYNOS: Add USB HSIC device   Dongjin Kim
• [PATCH] ARM: EXYNOS: Enable multiple cores on Exynos4   Dongjin Kim
• [PATCH] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Dongjin Kim
• 회신: [PATCH] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Dongjin Kim
• 회신: 회신: [PATCH] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Dongjin Kim
• 회신: 회신: 회신: [PATCH] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Dongjin Kim
• [PATCH] ARM: EXYNOS: Add HDMIPHY I2C adaptor   Dongjin Kim
• [PATCH v2] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Dongjin Kim
• [PATCH 1/4] arm/dts: max77686: Add DTS file for max77686 PMIC   Dongjin Kim
• [PATCH 2/4] arm/dts: exynos4: Add DTS files derived from common Exynos4   Dongjin Kim
• [PATCH 3/4] arm/dts: exynos4: Add DTS file for ODROID-X   Dongjin Kim
• 회신: [PATCH 1/4] arm/dts: max77686: Add DTS file for max77686 PMIC   Dongjin Kim
• 회신: [PATCH 2/4] arm/dts: exynos4: Add DTS files derived from common Exynos4   Dongjin Kim
• 회신: [PATCH v2] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Dongjin Kim
• [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform   Kukjin Kim
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Kukjin Kim
• [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/   Kukjin Kim
• [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform   Kukjin Kim
• [PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Kukjin Kim
• [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Kukjin Kim
• [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11   Kukjin Kim
• [PATCH 0/2] ARM: S3C24XX: Fix compilation errors with 3.6-rc1   Kukjin Kim
• [PATCH] ARM: EXYNOS: cleanup unused code related to GPS   Kukjin Kim
• RE: 회신: [PATCH 2/4] arm/dts: exynos4: Add DTS files derived from common Exynos4   Kukjin Kim
• [PATCH v2] ODROID-X: hkdk4412: Add new hardware based on Exynos4412   Kukjin Kim
• [PATCH] ARM: EXYNOS: Add HDMIPHY I2C adaptor   Kukjin Kim
• [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/   Kukjin Kim
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Kukjin Kim
• [PATCH 2/9] ARM: plat-s3c24xx: Don't use FIQ_START   Kukjin Kim
• [PATCH 4/6] ARM: s3c24xx: use new PWM driver   Kukjin Kim
• [PATCH 4/6] ARM: s3c24xx: use new PWM driver   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Kukjin Kim
• [PATCH 08/10] ARM: s3c24xx: enable CONFIG_BUG for tct_hammer   Kukjin Kim
• [PATCH 10/11] spi/s3c64xx: improve error handling   Kukjin Kim
• [PATCH 05/11] ARM: exynos: exynos_pm_add_dev_to_genpd may be unused   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Kukjin Kim
• [PATCH 14/14] drivers/spi/spi-s3c24xx.c: fix error return code   Kukjin Kim
• [PATCH] ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent   Kukjin Kim
• [PATCH] spi/s3c64xx: Drop extra calls to spi_master_get in suspend/remove functions   Kukjin Kim
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Kukjin Kim
• [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/   Kukjin Kim
• [GIT PULL] Samsung fixes for v3.6   Kukjin Kim
• ASoC: SAMSUNG: Change Kconfig to support all EXYNOSs   Kukjin Kim
• [PATCH v3 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Kukjin Kim
• [PATCH] ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock   Kukjin Kim
• ASoC: SAMSUNG: Change Kconfig to support all EXYNOSs   Kukjin Kim
• [PATCH v3 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers   Kukjin Kim
• [PATCH v3 1/3] ARM: Samsung: Add support for MSHC controller clocks   Kukjin Kim
• [PATCH 0/3] Removal of obsolete s3c2410_* GPIO API   Kukjin Kim
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Kukjin Kim
• [PATCH] ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock   Kukjin Kim
• [PATCH 0/3] Removal of obsolete s3c2410_* GPIO API   Kukjin Kim
• [PATCH] ARM: Exynos4: Turn off clocks for NAND, OneNAND and TSI controllers   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore   Kukjin Kim
• [PATCH 1/3] ARM: EXYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Kukjin Kim
• [PATCH] ARM: EXYNOS: Use non-secure MDMA1   Kukjin Kim
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Minchan Kim
• [v2 0/4] ARM: dma-mapping: IOMMU atomic allocation   Minchan Kim
• [alsa-devel] [PATCH 1/2] ASOC: SAMSUNG: Add DT support for i2s   Sangbeom Kim
• [alsa-devel] [PATCH] ASoC: samsung dma - prepare dma in start/resume trigger path   Sangbeom Kim
• [alsa-devel] [PATCH] ASoC: samsung dma - prepare dma in start/resume trigger path   Sangbeom Kim
• [alsa-devel] [RESUBMIT PATCH] ASoC: SAMSUNG: Change Kconfig to support all SAMSUNG ASoC   Sangbeom Kim
• [RFC] ARM: imx6q-sabrelite: Add CLKO IOMUX   Troy Kisky
• [PATCH] pinctrl: imx5: start numbering pad from 0   Troy Kisky
• [PATCH] pinctrl: imx5: start numbering pad from 0   Troy Kisky
• [PATCH 2/2] tty: serial: imx: don't reinit clock with enabled console   Troy Kisky
• [PATCH 2/2] tty: serial: imx: don't reinit clock with enabled console   Troy Kisky
• [PATCH 2/2] tty: serial: imx: don't reinit clock with enabled console   Troy Kisky
• [PATCH v2 07/31] arm64: Process management   Tobias Klauser
• [PATCH v3] printk: add option to print cpu id   Andi Kleen
• [GIT PULL] Update LZO compression   Andi Kleen
• [GIT PULL] Update LZO compression   Andi Kleen
• [GIT PULL] Update LZO compression   Andi Kleen
• [RFC PATCH] gpio: Add a generic GPIO handling driver   Marc Kleine-Budde
• [PATCH] ARM: imx: add imx5x usb controller clock lookups   Marc Kleine-Budde
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Marc Kleine-Budde
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Marc Kleine-Budde
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Marc Kleine-Budde
• How to debug hard lockup issue   Uwe Kleine-König
• How to debug hard lockup issue   Uwe Kleine-König
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Uwe Kleine-König
• [PATCH 1/2] ARM: i.MX35: Add kernel oftree support   Uwe Kleine-König
• [PATCH 2/2] ARM: imx/pcm043: add oftree support   Uwe Kleine-König
• [PATCH v5 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• kernel entry for thumb2-only cpus   Uwe Kleine-König
• [PATCH v5 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH v6 1/3] ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15   Uwe Kleine-König
• [PATCH v6 2/3] Cortex-M3: Add base support for Cortex-M3   Uwe Kleine-König
• [PATCH v6 3/3] Cortex-M3: Add support for exception handling   Uwe Kleine-König
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• [PATCH] mtd: mxc_nand: Fix compiler warnings   Uwe Kleine-König
• [PATCH v2 00/25] make *struct of_device_id.data const   Uwe Kleine-König
• kernel entry for thumb2-only cpus   Uwe Kleine-König
• [PATCH 2/4] gpio/mxc: specify gpio base for device tree probe   Uwe Kleine-König
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Uwe Kleine-König
• [PATCH] ARM: imx35: don't disable the uart clock when DEBUG_LL is in use   Uwe Kleine-König
• [PATCH 1/2] ARM: i.MX35: Add kernel oftree support   Uwe Kleine-König
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Uwe Kleine-König
• [PATCH 1/2] ARM: i.MX35: Add kernel oftree support   Uwe Kleine-König
• [PATCH] ARM: imx/imx31-dt: drop selecting USE_OF   Uwe Kleine-König
• [PATCH] ARM: imx/iomux-v3: allow pad_list to be const   Uwe Kleine-König
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Uwe Kleine-König
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Uwe Kleine-König
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Uwe Kleine-König
• [PATCH] ARM: imx/iomux-v3: allow pad_list to be const   Uwe Kleine-König
• [PATCH v2 1/2] ARM: i.MX35: Add kernel oftree support   Uwe Kleine-König
• [PATCH v2 2/2] ARM: imx/pcm043: add oftree support   Uwe Kleine-König
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Uwe Kleine-König
• [PATCH v2 2/2] ARM: imx/pcm043: add oftree support   Uwe Kleine-König
• Lockups reading from i.MX51 SSI registers   Uwe Kleine-König
• [PATCH v2 1/2] ARM: i.MX35: Add kernel oftree support   Uwe Kleine-König
• [PATCH] pinctrl: imx5: start numbering pad from 0   Uwe Kleine-König
• [PATCH] pinctrl: imx5: start numbering pad from 0   Uwe Kleine-König
• [PATCH v6 0/3] Updated Cortex-M3 series   Uwe Kleine-König
• Issues with all kernels after 3.3.7   Uwe Kleine-König
• Issues with all kernels after 3.3.7   Uwe Kleine-König
• [alsa-devel] Lockups reading from i.MX51 SSI registers   Uwe Kleine-König
• [PATCH] mtd: mxc_nand: Fix compiler warnings   Uwe Kleine-König
• [PATCH RFC] ARM: busy loop at the end of machine_power_off   Uwe Kleine-König
• restart callback not supposed to sleep?   Uwe Kleine-König
• restart callback not supposed to sleep?   Uwe Kleine-König
• restart callback not supposed to sleep?   Uwe Kleine-König
• [PATCH] ARM: tegra_defconfig: enable APB DMA support   Uwe Kleine-König
• [PATCH] MAINTAINERS: add defconfig file to IMX section   Uwe Kleine-König
• [PATCH] ARM: tegra_defconfig: enable APB DMA support   Uwe Kleine-König
• [PATCH] ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs'   Tetsuyuki Kobayashi
• [GIT PULL] Renesas ARM-based SoC: KZM-9A-GT for 3.7   Tetsuyuki Kobayashi
• Current state of AM33xx patches   Koen Kooi
• Current state of AM33xx patches   Koen Kooi
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Koen Kooi
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Koen Kooi
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Koen Kooi
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Koen Kooi
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Koen Kooi
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Koen Kooi
• [PATCH] ARM: AM33XX: board-generic: Add of_dev_auxdata to fix dev_id for CAN module   Koen Kooi
• [PATCH v2 2/3] mmc: davinci_mmc: convert to DMA engine API   Koen Kooi
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Koen Kooi
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Koen Kooi
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Koen Kooi
• [PATCH v3 4/4] arm/dts: Add tps65217 regulator DT data to am335x-bone.dts   Koen Kooi
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   Koen Kooi
• PER_LINUX32, Was: [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Jiri Kosina
• [PATCH v3] printk: add option to print cpu id   Aaro Koskinen
• [PATCH] ARM: dma-mapping: fix incorrect freeing of atomic allocations   Aaro Koskinen
• [PATCH] ARM: dma-mapping: fix atomic allocation alignment   Aaro Koskinen
• [PATCH v2 11/31] arm64: IRQ handling   Aaro Koskinen
• Potential Regression in 3.6-rc1 - Kirkwood SATA   Aaro Koskinen
• [PATCH 2/3] ARM: DMA-Mapping: print warning when atomic coherent allocation fails   Aaro Koskinen
• [PATCH 3/3] ARM: Kirkwood: increase atomic coherent pool size   Aaro Koskinen
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Aaro Koskinen
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Aaro Koskinen
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Aaro Koskinen
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Aaro Koskinen
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Aaro Koskinen
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Aaro Koskinen
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Vinod Koul
• [PATCH/RFC 1/4] dma: add a function to request a DMA channel for a specific client   Vinod Koul
• [PATCH v2 1/3] dmaengine: add TI EDMA DMA engine driver   Vinod Koul
• [PATCH v2 3/3] spi: spi-davinci: convert to DMA engine API   Vinod Koul
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Vinod Koul
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Vinod Koul
• [PATCH v2 3/3] spi: spi-davinci: convert to DMA engine API   Vinod Koul
• [PATCH v4 0/2] dmaengine: add support mmp-pdma   Vinod Koul
• [PATCH 0/2] ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE   Vinod Koul
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Vinod Koul
• [PATCH v4 0/2] dmaengine: add support mmp-pdma   Vinod Koul
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Vinod Koul
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Vinod Koul
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Vinod Koul
• [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Tero Kristo
• [PATCH v2 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Tero Kristo
• [PATCH 03/11] usb/ohci-omap: remove unused variable   Greg Kroah-Hartman
• [PATCH] dma: imx-dma: Fix kernel crash due to missing clock conversion   Greg Kroah-Hartman
• [PATCH] dma: imx-dma: Fix kernel crash due to missing clock conversion   Greg Kroah-Hartman
• [PATCH 0/2] tty: serial: imx: fix lockup and garbage on SMP   Greg Kroah-Hartman
• [Memory leak]: memory leak in sys_oabi_semtimedo   Akhilesh Kumar
• [PATCH 1/4] ARM: export read_current_timer   Shinya Kuribayashi
• [PATCH 1/4] ARM: export read_current_timer   Shinya Kuribayashi
• [PATCH 1/1 v2] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Philippe LANGLAIS
• [PATCH 1/1 v2] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT   Philippe LANGLAIS
• [PATCH 0/2] Replace the obsolete preset API by timings API   Prabhakar Lad
• [PATCH 1/2] dm644x: replace the obsolete preset API by the timings API.   Prabhakar Lad
• [PATCH 2/2] ths7303: enable THS7303 for HD modes   Prabhakar Lad
• [PATCH v4 0/2] ARM: davinci: add support for dm365 vpbe display   Prabhakar Lad
• [PATCH v4 1/2] ARM: davinci: dm365: add support for v4l2 video display   Prabhakar Lad
• [PATCH v4 2/2] ARM: davinci: dm365 EVM: add support for VPBE display   Prabhakar Lad
• [PATCH v3 0/2] ARM: davinci: add support for dm355 vpbe display   Prabhakar Lad
• [PATCH v3 1/2] ARM: davinci: dm355: add support for v4l2 video display   Prabhakar Lad
• [PATCH v3 2/2] ARM: davinci: dm355 EVM: add support for VPBE display   Prabhakar Lad
• [PATCH 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Prabhakar Lad
• [PATCH 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Prabhakar Lad
• [PATCH 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Prabhakar Lad
• [PATCH] ARM: relax conditions required for enabling Contiguous Memory Allocator   Prabhakar Lad
• [PATCH v2 0/2] ARM: davinci: da850/omap-l138: add support for VPIF driver   Prabhakar Lad
• [PATCH v2 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Prabhakar Lad
• [PATCH v2 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Prabhakar Lad
• [alsa-devel] [PATCH] ASoC: samsung dma - prepare dma in start/resume trigger path   Clemens Ladisch
• [PATCH 2/8] UBI: separate bad_peb_limit in a function   Shmulik Ladkani
• [PATCH 4/8] UBI: prepare for max_beb_per1024 module parameter addition   Shmulik Ladkani
• [PATCH 5/8] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev   Shmulik Ladkani
• [PATCH 6/8] UBI: replace MTD_UBI_BEB_LIMIT with module parameter   Shmulik Ladkani
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for   Rob Landley
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Julia Lawall
• [PATCH 14/14] drivers/spi/spi-s3c24xx.c: fix error return code   Julia Lawall
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Julia Lawall
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Julia Lawall
• [PATCH 14/14] drivers/spi/spi-s3c24xx.c: fix error return code   Julia Lawall
• [PATCH 4/13] i2c: sirf: use clk_prepare_enable and clk_disable_unprepare   Julia Lawall
• [PATCH 5/13] arch/arm: use clk_prepare_enable and clk_disable_unprepare   Julia Lawall
• [PATCH 11/13] arch/arm/mach-at91/gpio.c: use clk_prepare_enable and clk_disable_unprepare   Julia Lawall
• [PATCH 13/13] drivers/rtc/rtc-coh901331.c: use clk_prepare_enable and clk_disable_unprepare   Julia Lawall
• [PATCH] serial: pl011: honour serial aliases in device tree   Matthew Leach
• [PATCH v2] serial: pl011: honour serial aliases in device tree   Matthew Leach
• [PATCH v3] serial: pl011: honour serial aliases in device tree   Matthew Leach
• [PATCH v3] serial: pl011: honour serial aliases in device tree   Matthew Leach
• [PATCH 1/1] remoteproc: extend customized fw loader to cover request and release   Tzu-Jung Lee
• [PATCH 1/9] ARM: PMU: Add runtime PM Support   Ming Lei
• [PATCH 4/4] media: mx2_camera: Fix clock handling for i.MX27.   Guennadi Liakhovetski
• [PATCH/RFC 1/4] dma: add a function to request a DMA channel for a specific client   Guennadi Liakhovetski
• [PATCH/RFC 1/4] dma: add a function to request a DMA channel for a specific client   Guennadi Liakhovetski
• Vacations.   Guennadi Liakhovetski
• Preliminary topic proposals for the ARM mini-summit   Guennadi Liakhovetski
• [PATCH] [media] atmel_isi: allocate memory to store the isi platform data.   Guennadi Liakhovetski
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Ola Lilja
• FW: [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Ola Lilja
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Franky Lin
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Franky Lin
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Franky Lin
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Tony Lindgren
• [PATCH 1/1] ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pin   Tony Lindgren
• [GIT PULL 1/5] omap device tree changes for v3.6 merge window   Tony Lindgren
• [PATCH v2] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Tony Lindgren
• [PATCH] OMAP2+: Fix random config build break with !ARM_CPU_SUSPEND   Tony Lindgren
• [RFC 1/6] ARM: OMAP3: PRM: move prcm interrupt handlers to PRM driver code   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix dmtimer set source clock failure   Tony Lindgren
• [PATCH] OMAP: remove unused parameter arch_id from uncompress.h   Tony Lindgren
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   Tony Lindgren
• [PATCH 1/2] ARM: OMAP: clean up some smatch warnings, fix some printk(KERN_ERR ...   Tony Lindgren
• [PATCH 1/2] arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on   Tony Lindgren
• [PATCH] Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix dmtimer set source clock failure   Tony Lindgren
• [PATCH v3 2/7] mfd: omap: control: core system control driver   Tony Lindgren
• [PATCH v3 3/7] OMAP2+: use control module mfd driver in omap_type   Tony Lindgren
• [PATCH v3 5/7] ARM: OMAP4+: thermal: introduce bandgap temperature sensor   Tony Lindgren
• [PATCH v4 2/4] mfd: omap: control: core system control driver   Tony Lindgren
• [linux-pm] [PATCH v4 2/4] mfd: omap: control: core system control driver   Tony Lindgren
• [PATCH] omap: Fix multi.h when only ARCH_OMAP3 and SOC_AM33XX are selected   Tony Lindgren
• [PATCH-V3] ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2   Tony Lindgren
• [linux-pm] [PATCH v4 2/4] mfd: omap: control: core system control driver   Tony Lindgren
• [linux-pm] [PATCH v4 2/4] mfd: omap: control: core system control driver   Tony Lindgren
• [PATCH 07/11] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver   Tony Lindgren
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Tony Lindgren
• [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030   Tony Lindgren
• [linux-pm] [PATCH v4 2/4] mfd: omap: control: core system control driver   Tony Lindgren
• [GIT PULL] ARM: OMAP: PM fixes for v3.6-rc   Tony Lindgren
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Tony Lindgren
• [GIT PULL] omap fixes for v3.6-rc1   Tony Lindgren
• [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Tony Lindgren
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Tony Lindgren
• [PATCH v2 3/3] ARM: OMAP: omap_device: idle devices with no driver bound   Tony Lindgren
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Tony Lindgren
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Tony Lindgren
• [PATCH v2 04/31] arm64: MMU definitions   Tony Lindgren
• [PATCH v2 13/31] arm64: Device specific operations   Tony Lindgren
• [PATCH v2 15/31] arm64: SMP support   Tony Lindgren
• [PATCH v2 28/31] arm64: Generic timers support   Tony Lindgren
• [PATCH v2 30/31] arm64: Build infrastructure   Tony Lindgren
• [PATCH v2 00/31] AArch64 Linux kernel port   Tony Lindgren
• [PATCH v2 04/31] arm64: MMU definitions   Tony Lindgren
• [PATCH v2 15/31] arm64: SMP support   Tony Lindgren
• [PATCH-V3] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data   Tony Lindgren
• [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Tony Lindgren
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Tony Lindgren
• [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Tony Lindgren
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Tony Lindgren
• [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Tony Lindgren
• [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support   Tony Lindgren
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Tony Lindgren
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• [PATCH] MMC: OMAP MSDI: fix broken PIO mode   Tony Lindgren
• [PATCH v3 01/23] serial: omap: define and use to_uart_omap_port()   Tony Lindgren
• [PATCH v3 03/23] serial: omap: don't access the platform_device   Tony Lindgren
• [PATCH v3 20/23] serial: omap: fix software flow control   Tony Lindgren
• [PATCH v3 22/23] serial: omap: move uart_omap_port definition to C file   Tony Lindgren
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Tony Lindgren
• [PATCH v6 07/10] ARM: OMAP2+: gpmc: generic timing calculation   Tony Lindgren
• [PATCH] arm/dts: omap5: Add mmc controller nodes and board data   Tony Lindgren
• [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state   Tony Lindgren
• [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM   Tony Lindgren
• [PATCH v3 1/4] arm/dts: regulator: Add tps65910 device tree data   Tony Lindgren
• [PATCH] ARM: omap: add dtb targets   Tony Lindgren
• [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..   Tony Lindgren
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Tony Lindgren
• TI SoC Linux BoF @ Linux Plumbers Conference: tomorrow   Tony Lindgren
• [PATCH 0/9] ARM: OMAP: cleanup plat/board.h file   Tony Lindgren
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Tony Lindgren
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Tony Lindgren
• [PATCH] ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER   Tony Lindgren
• [PATCH 0/5] hwrng/ARM: OMAP: convert to use runtime PM   Tony Lindgren
• [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   Tony Lindgren
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   Tony Lindgren
• [PATCH v4 3/3] arm/dts: AM33XX: Add D_CAN device tree data   Tony Lindgren
• [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..   Tony Lindgren
• [PATCH v3 0/4] Add AM33XX regulators device tree data   Tony Lindgren
• [PATCH 0/9] Clean up hardcoded IRQs for mach-omap2, enable SPARSE_IRQ, plaform_data/gpio-omap.h   Tony Lindgren
• [PATCH 1/9] ARM: OMAP1: Move define of OMAP_LCD_DMA to dma.h   Tony Lindgren
• [PATCH 2/9] ARM: OMAP1: Define OMAP1_INT_I2C locally   Tony Lindgren
• [PATCH 3/9] ARM: OMAP2+: Make INTCPS_NR_IRQS local for mach-omap2/irq.c   Tony Lindgren
• [PATCH 4/9] ARM: OMAP2+: Remove unused nand_irq for GPMC   Tony Lindgren
• [PATCH 5/9] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end   Tony Lindgren
• [PATCH 6/9] ARM: OMAP: Move gpio.h to include/linux/platform_data   Tony Lindgren
• [PATCH 7/9] ARM: OMAP2+: Prepare for irqs.h removal   Tony Lindgren
• [PATCH 8/9] ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ   Tony Lindgren
• [PATCH 9/9] ARM: OMAP1: Move plat/irqs.h to mach/irqs.h   Tony Lindgren
• [PATCH 0/9] Clean up hardcoded IRQs for mach-omap2, enable SPARSE_IRQ, plaform_data/gpio-omap.h   Tony Lindgren
• [PATCH 08/10] ARM: omap2: add explict mach/gpio.h includes   Tony Lindgren
• Without MACH_ option Early printk (DEBUG_LL)   Tony Lindgren
• [PATCH 4/5] leds: leds-gpio: adopt pinctrl support   Tony Lindgren
• Without MACH_ option Early printk (DEBUG_LL)   Tony Lindgren
• Without MACH_ option Early printk (DEBUG_LL)   Tony Lindgren
• [PATCH 5/9] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end   Tony Lindgren
• [PATCH 0/4] Series short description   Tony Lindgren
• [PATCH 1/4] ARM: OMAP: Remove unused old gpio-switch.h   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: Split plat/hardware.h, introduce local hardware.h and soc.h for omap2+   Tony Lindgren
• [PATCH 3/4] ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2   Tony Lindgren
• [PATCH 4/4] ARM: OMAP1: Move SoC specific headers from plat to mach for omap1   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: Split plat/hardware.h, introduce local hardware.h and soc.h for omap2+   Tony Lindgren
• changing clock source frequency input for ARM kernel   John Linn
• Cortex A9 with ACP needing mixed coherency model   John Linn
• [PATCH 5/6] ARM: ux500: Enable HIGHMEM on all mop500 platforms   Russell King - ARM Linux
• omap_device: query on "fck" clk alias created   Russell King - ARM Linux
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Russell King - ARM Linux
• omap_device: query on "fck" clk alias created   Russell King - ARM Linux
• omap_device: query on "fck" clk alias created   Russell King - ARM Linux
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Russell King - ARM Linux
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Russell King - ARM Linux
• [PATCH] ARM: makefile: work around toolchain bug in recent versions of binutils   Russell King - ARM Linux
• doubts about switch_mm   Russell King - ARM Linux
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Russell King - ARM Linux
• MMAP_MIN_ADDR problem/question   Russell King - ARM Linux
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Russell King - ARM Linux
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Russell King - ARM Linux
• [PATCH 00/22] Introducing the TI Keystone platform   Russell King - ARM Linux
• [PATCH 1/1] ARM: Fix mapping in alloc_init_section for unaligned addresses.   Russell King - ARM Linux
• [PATCH v3] printk: add option to print cpu id   Russell King - ARM Linux
• [PATCH 01/22] ARM: add mechanism for late code patching   Russell King - ARM Linux
• [PATCH 03/22] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Russell King - ARM Linux
• [PATCH 01/22] ARM: add mechanism for late code patching   Russell King - ARM Linux
• kernel entry for thumb2-only cpus   Russell King - ARM Linux
• kernel entry for thumb2-only cpus   Russell King - ARM Linux
• [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/   Russell King - ARM Linux
• [PATCH] ARM: ep93xx: clockevent support   Russell King - ARM Linux
• Custom platform for commercial device   Russell King - ARM Linux
• [PATCH 0/6] ARM: dove: DT support for Marvell Dove   Russell King - ARM Linux
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Russell King - ARM Linux
• [PATCH 2/2] ARM i.MX5: Hard reset the IPU during startup   Russell King - ARM Linux
• kernel entry for thumb2-only cpus   Russell King - ARM Linux
• Status of patch 7375/1   Russell King - ARM Linux
• kernel entry for thumb2-only cpus   Russell King - ARM Linux
• [PATCH 3/6] ARM: sa1100: include asm/io.h in hackkit leds code   Russell King - ARM Linux
• [PATCH 01/22] ARM: add mechanism for late code patching   Russell King - ARM Linux
• [PATCH 09/10] ARM: rpc: Fix building RiscPC   Russell King - ARM Linux
• imx6q restart is broken   Russell King - ARM Linux
• imx6q restart is broken   Russell King - ARM Linux
• imx6q restart is broken   Russell King - ARM Linux
• The curse of EPROBE_DEFER   Russell King - ARM Linux
• imx6q restart is broken   Russell King - ARM Linux
• [PATCH 04/10] ARM: pass -marm to gcc by default   Russell King - ARM Linux
• imx6q restart is broken   Russell King - ARM Linux
• Why the region area don't decrease 1 in function sanity_check_meminfo?   Russell King - ARM Linux
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Russell King - ARM Linux
• [PATCH] Allow memblock steal operations to remove memory from anywhere   Russell King - ARM Linux
• [PATCH 09/10] ARM: rpc: Fix building RiscPC   Russell King - ARM Linux
• [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Russell King - ARM Linux
• Discontiguous memory and cacheflush   Russell King - ARM Linux
• [PATCH v3 3/4] dmatest: add dmaengine_slave_config for DMA_MEMCPY   Russell King - ARM Linux
• [PATCH v3 1/4] dmaengine: mmp-pdma support   Russell King - ARM Linux
• [PATCH v3 1/4] dmaengine: mmp-pdma support   Russell King - ARM Linux
• [PATCH] ARM: Dove: allow PCI to be disabled   Russell King - ARM Linux
• [PATCH] ARM: Dove: allow PCI to be disabled   Russell King - ARM Linux
• imx6q restart is broken   Russell King - ARM Linux
• [PATCH] dma: amba-pl08x: Export pl08x_filter_id   Russell King - ARM Linux
• Discontiguous memory and cacheflush   Russell King - ARM Linux
• [PATCH 1/3] dmaengine: add TI EDMA DMA engine driver   Russell King - ARM Linux
• imx6q restart is broken   Russell King - ARM Linux
• [PATCH] BUG: clk_find() misses some clocks   Russell King - ARM Linux
• [PATCH] BUG: clk_find() misses some clocks   Russell King - ARM Linux
• Discontiguous memory and cacheflush   Russell King - ARM Linux
• [BUG] Deferred probing in driver model is racy, resulting in lost probes   Russell King - ARM Linux
• restart callback not supposed to sleep?   Russell King - ARM Linux
• restart callback not supposed to sleep?   Russell King - ARM Linux
• restart callback not supposed to sleep?   Russell King - ARM Linux
• [PATCH] ARM: relax conditions required for enabling Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Russell King - ARM Linux
• [PATCHv6 2/2] ARM: dma-mapping: remove custom consistent dma region   Russell King - ARM Linux
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Russell King - ARM Linux
• ioremap() fail on physical address 0x0 in 3.4 kernel   Russell King - ARM Linux
• ioremap() fail on physical address 0x0 in 3.4 kernel   Russell King - ARM Linux
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Russell King - ARM Linux
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Russell King - ARM Linux
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Russell King - ARM Linux
• Shutdown problem in SMP system happened on Tegra20   Russell King - ARM Linux
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Russell King - ARM Linux
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Russell King - ARM Linux
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Russell King - ARM Linux
• Shutdown problem in SMP system happened on Tegra20   Russell King - ARM Linux
• Shutdown problem in SMP system happened on Tegra20   Russell King - ARM Linux
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Russell King - ARM Linux
• For physical memory management, why take holes page as free pages?   Russell King - ARM Linux
• For buddy system initialization, the holes between banks adjacent will be released to buddy allocator?   Russell King - ARM Linux
• [GIT PULL] io.h clean-up for PCI   Russell King - ARM Linux
• Question about ION carveout heap support partial cache flush   Russell King - ARM Linux
• For buddy system initialization, the holes between banks adjacent will be released to buddy allocator?   Russell King - ARM Linux
• Question about ION carveout heap support partial cache flush   Russell King - ARM Linux
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Russell King - ARM Linux
• [PATCH 03/10] serial: atmel: add explict mach/gpio.h include   Russell King - ARM Linux
• [PATCH 06/10] ARM: shmobile: explicitly include mach/gpio.h   Russell King - ARM Linux
• [PATCH 00/10] Make mach/gpio.h optional   Russell King - ARM Linux
• [RFC/PATCH] ARM: smp: Fix cpu_up() racing with sys_reboot   Russell King - ARM Linux
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Russell King - ARM Linux
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Russell King - ARM Linux
• [PATCH 00/10] Make mach/gpio.h optional   Russell King - ARM Linux
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH 05/10] ARM: at91: explicitly include mach/gpio.h   Russell King - ARM Linux
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Russell King - ARM Linux
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Russell King - ARM Linux
• [PATCH] hvc_dcc : add support to armv4 and armv5 core   Russell King - ARM Linux
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   Russell King - ARM Linux
• Without MACH_ option Early printk (DEBUG_LL)   Russell King - ARM Linux
• [PATCH v2] ARM: Build dtb files in all target   Russell King - ARM Linux
• [PATCH v3 12/32] PCI/ARM: use PCIe capabilities access functions to simplify implementation   Jiang Liu
• [PATCH] ARM: mmp: fix potential NULL dereference   Yuanhan Liu
• [PATCH 0/5] ARM: tegra: add CPU hotplug support   Joseph Lo
• [PATCH 1/5] ARM: tegra: introduce tegra_cpu_car_ops structures   Joseph Lo
• [PATCH 2/5] ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops   Joseph Lo
• [PATCH 3/5] ARM: tegra: clean up the common assembly macros into sleep.h   Joseph Lo
• [PATCH 4/5] ARM: tegra30: add CPU hotplug support   Joseph Lo
• [PATCH 5/5] ARM: tegra20: add CPU hotplug support   Joseph Lo
• [PATCH 0/5] ARM: tegra: add CPU hotplug support   Joseph Lo
• [PATCH V2 0/6] ARM: tegra: add CPU hotplug support   Joseph Lo
• [PATCH V2 1/6] ARM: tegra: introduce tegra_cpu_car_ops structures   Joseph Lo
• [PATCH V2 2/6] ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops   Joseph Lo
• [PATCH V2 3/6] ARM: tegra: clean up the common assembly macros into sleep.h   Joseph Lo
• [PATCH V2 4/6] ARM: tegra30: add CPU hotplug support   Joseph Lo
• [PATCH V2 5/6] ARM: tegra20: add CPU hotplug support   Joseph Lo
• [PATCH V2 6/6] ARM: tegra: defconfig: enable HOTPLUG_CPU   Joseph Lo
• [PATCH V2 0/6] ARM: tegra: add CPU hotplug support   Joseph Lo
• [PATCH V3 0/6] ARM: tegra: add CPU hotplug support   Joseph Lo
• [PATCH V3 1/6] ARM: tegra: introduce tegra_cpu_car_ops structures   Joseph Lo
• [PATCH V3 2/6] ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops   Joseph Lo
• [PATCH V3 3/6] ARM: tegra: clean up the common assembly macros into sleep.h   Joseph Lo
• [PATCH V3 4/6] ARM: tegra30: add CPU hotplug support   Joseph Lo
• [PATCH V3 5/6] ARM: tegra20: add CPU hotplug support   Joseph Lo
• [PATCH V3 6/6] ARM: tegra: defconfig: enable HOTPLUG_CPU   Joseph Lo
• [PATCH] ARM: tegra: clocks: separate tegra_clk_32k_ops from Tegra20 and Tegra30   Joseph Lo
• [PATCH] ARM: tegra30: clocks: fix the wrong tegra_audio_sync_clk_ops name   Joseph Lo
• [PATCH] mmc: tegra: convert to device tree support only   Joseph Lo
• [PATCH] mmc: tegra: convert to device tree support only   Joseph Lo
• TI SoC Linux BoF @ Linux Plumbers Conference: tomorrow   Locke, Matthew
• [RFC PATCH] ARM: initial DTS support for km_kirkwood   Valentin Longchamp
• [RFC PATCH] ARM: initial DTS support for km_kirkwood   Valentin Longchamp
• [RFC PATCH] ARM: initial DTS support for km_kirkwood   Valentin Longchamp
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Warner Losh
• [PATCH 05/14] ARM: at91: add pinctrl support   Warner Losh
• [PATCH] omap: Fix multi.h when only ARCH_OMAP3 and SOC_AM33XX are selected   Jan Luebbe
• [PATCH 0/3] remoteproc: introduce rproc recovery   Fernando Guzman Lugo
• [PATCH 1/3] remoteproc: add rproc_report_crash function to notify rproc crashes   Fernando Guzman Lugo
• [PATCH 2/3] remoteproc: recover a remoteproc when it has crashed   Fernando Guzman Lugo
• [PATCH 3/3] remoteproc: create debugfs entry to disable/enable recovery dynamically   Fernando Guzman Lugo
• [PATCH] rpmsg: use right device paramter when calling dma_free_coherent function   Fernando Guzman Lugo
• [PATCHv2 0/3] remoteproc: introduce rproc recovery   Fernando Guzman Lugo
• [PATCHv2 1/3] remoteproc: add rproc_report_crash function to notify rproc crashes   Fernando Guzman Lugo
• [PATCHv2 2/3] remoteproc: recover a remoteproc when it has crashed   Fernando Guzman Lugo
• [PATCHv2 3/3] remoteproc: create debugfs entry to disable/enable recovery dynamically   Fernando Guzman Lugo
• [PATCH 3/3] ARM: OMAP: omap_device: expose hwmod assert/deassert to omap devices   Omar Ramirez Luna
• [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence   Omar Ramirez Luna
• [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence   Omar Ramirez Luna
• [PATCH 1/3] ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled   Omar Ramirez Luna
• [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence   Omar Ramirez Luna
• [PATCH 1/3] ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled   Omar Ramirez Luna
• [PATCH 0/2] OMAP: hwmod: fix hardreset handling   Omar Ramirez Luna
• [PATCH 1/2] ARM: OMAP: hwmod: partially un-reset hwmods might not be properly enabled   Omar Ramirez Luna
• [PATCH 2/2] ARM: OMAP: hwmod: revise deassert sequence   Omar Ramirez Luna
• [PATCH 1/1] arm: KGDB support for PXA   Denis V. Lunev
• [PATCH 2/3] ARM: Kirkwood: ts219: fix Makefile.boot after dts was split in two   Andrew Lunn
• [PATCH 3/3] ARM: Kirkwood: add DT boards to defconfig   Andrew Lunn
• [PATCH 2/3] ARM: Kirkwood: ts219: fix Makefile.boot after dts was split in two   Andrew Lunn
• [PATCH 1/6] ARM: dove: unify clock setup   Andrew Lunn
• [PATCH 3/3] ARM: Kirkwood: add DT boards to defconfig   Andrew Lunn
• [PATCH v2 2/6] ARM: dove: add clock gating control   Andrew Lunn
• [patch] ARM: Kirkwood: Fix iconnect leds   Andrew Lunn
• [patch] ARM: Kirkwood: fix Makefile.boot   Andrew Lunn
• [PATCH 03/10] ARM: mv78xx0: fix win_cfg_base prototype   Andrew Lunn
• PATCH Add support for the Iomega IX2-200 Device Tree   Andrew Lunn
• PATCH Add support for the Iomega IX2-200 Device Tree   Andrew Lunn
• [PATCH] ARM: Kirkwood: Iomega_IX2_200 DT support Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Andrew Lunn
• [PATCH] ARM: Kirkwood: Iomega_IX2_200 DT support Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Andrew Lunn
• [PATCH] ARM: Kirkwood: Iomega ix2-200 DT support Signed-off-by: Alan M Butler <alanbutty12 at gmail.com>   Andrew Lunn
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Andrew Lunn
• [3.6-rc3 regression] sata_mv cannot get optional clkdev breaking boot on QNAP TS-119P+   Andrew Lunn
• [PATCH] mtd: orion_nand: remove <mach/hardware.h> include   Andrew Lunn
• [RFC PATCH] ARM: initial DTS support for km_kirkwood   Andrew Lunn
• arm: move plat-orion platform_data headers to the right place   Andrew Lunn
• [PATCH] ARM: Build dtb files in all target   Andrew Lunn
• [PATCH] ARM: Build dtb files in all target   Andrew Lunn
• [PATCH v2] ARM: Build dtb files in all target   Andrew Lunn
• [PATCH] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c   Andrew Lunn
• [PATCH] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c   Andrew Lunn
• [PATCH] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c   Andrew Lunn
• [PATCH] ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c   Andrew Lunn
• [PATCH v2 6/9] misc: Generic on-chip SRAM allocation driver   Jan Lübbe
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Pavel Machek
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Pavel Machek
• [RFC][PATCH] Disintegrate sharpsl_param.c   Pavel Machek
• Current state of AM33xx patches   Daniel Mack
• Current state of AM33xx patches   Daniel Mack
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• [PATCH 2/2] net: davinci_mdio: add DT bindings   Daniel Mack
• [PATCH RFC] ARM: omap2/am33xx: add hwmod for davinci_mdio   Daniel Mack
• Current state of AM33xx patches   Daniel Mack
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• [alsa-devel] DT support for Davinci ASoC platform   Daniel Mack
• am33xx: default to status = "disabled"?   Daniel Mack
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Daniel Mack
• [PATCH 1/2] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Daniel Mack
• [PATCH v3 4/9] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Daniel Mack
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Daniel Mack
• [PATCH 2/6] ARM: pxa remove irq_to_gpio from eeti_ts driver   Daniel Mack
• [alsa-devel] DT support for Davinci ASoC platform   Daniel Mack
• [PATCH 2/6] ARM: pxa remove irq_to_gpio from eeti_ts driver   Daniel Mack
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Daniel Mack
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Daniel Mack
• [PATCH v6 00/10] OMAP-GPMC: generic time calc, prepare for driver   Daniel Mack
• [PATCH v6 00/10] OMAP-GPMC: generic time calc, prepare for driver   Daniel Mack
• [PATCH v3 0/3] DaVinci DMA engine conversion   Daniel Mack
• [PATCH 5/6] ARM: OMAP: Disable venc for OMAP4   Chandrabhanu Mahapatra
• [PATCH V6 0/6] OMAPDSS: Cleanup cpu_is checks   Chandrabhanu Mahapatra
• [PATCH V6 4/6] ARM: OMAP: Disable venc for OMAP4   Chandrabhanu Mahapatra
• [PATCH] ARM: ep93xx: Use HW MAC filter in ethernet driver   Ryan Mallon
• [PATCH] ARM: ep93xx: clockevent support   Ryan Mallon
• [PATCH] ARM: ep93xx: clockevent support   Ryan Mallon
• [PATCH v2] ARM: ep93xx: Use HW MAC filter in ethernet driver   Ryan Mallon
• [PATCH v3] ARM: ep93xx: Use HW MAC filter in ethernet driver   Ryan Mallon
• [GIT PULL] Update LZO compression   Roman Mamedov
• [PATCH] clk: add Loongson1B clock support   Belisko Marek
• [RFC] Add support for Aurora L2 Cache Controller   Catalin Marinas
• [PATCH 00/22] Introducing the TI Keystone platform   Catalin Marinas
• imx6q restart is broken   Catalin Marinas
• [PATCH] ARM: S5PV310: Set bit 22 in the PL310 (cache controller) AuxCtlr register   Catalin Marinas
• [PATCH v2 00/31] AArch64 Linux kernel port   Catalin Marinas
• [PATCH v2 01/31] arm64: Assembly macros and definitions   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v2 03/31] arm64: Exception handling   Catalin Marinas
• [PATCH v2 04/31] arm64: MMU definitions   Catalin Marinas
• [PATCH v2 05/31] arm64: MMU initialisation   Catalin Marinas
• [PATCH v2 06/31] arm64: MMU fault handling and page table management   Catalin Marinas
• [PATCH v2 07/31] arm64: Process management   Catalin Marinas
• [PATCH v2 08/31] arm64: CPU support   Catalin Marinas
• [PATCH v2 09/31] arm64: Cache maintenance routines   Catalin Marinas
• [PATCH v2 10/31] arm64: TLB maintenance functionality   Catalin Marinas
• [PATCH v2 11/31] arm64: IRQ handling   Catalin Marinas
• [PATCH v2 12/31] arm64: Atomic operations   Catalin Marinas
• [PATCH v2 13/31] arm64: Device specific operations   Catalin Marinas
• [PATCH v2 14/31] arm64: DMA mapping API   Catalin Marinas
• [PATCH v2 15/31] arm64: SMP support   Catalin Marinas
• [PATCH v2 16/31] arm64: ELF definitions   Catalin Marinas
• [PATCH v2 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v2 18/31] arm64: VDSO support   Catalin Marinas
• [PATCH v2 19/31] arm64: Signal handling support   Catalin Marinas
• [PATCH v2 20/31] arm64: User access library functions   Catalin Marinas
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Catalin Marinas
• [PATCH v2 22/31] arm64: Floating point and SIMD   Catalin Marinas
• [PATCH v2 23/31] arm64: Debugging support   Catalin Marinas
• [PATCH v2 24/31] arm64: Add support for /proc/sys/debug/exception-trace   Catalin Marinas
• [PATCH v2 25/31] arm64: Performance counters support   Catalin Marinas
• [PATCH v2 26/31] arm64: Miscellaneous library functions   Catalin Marinas
• [PATCH v2 27/31] arm64: Loadable modules   Catalin Marinas
• [PATCH v2 28/31] arm64: Generic timers support   Catalin Marinas
• [PATCH v2 29/31] arm64: Miscellaneous header files   Catalin Marinas
• [PATCH v2 30/31] arm64: Build infrastructure   Catalin Marinas
• [PATCH v2 31/31] arm64: MAINTAINERS update   Catalin Marinas
• [PATCH v2 04/31] arm64: MMU definitions   Catalin Marinas
• [PATCH v2 27/31] arm64: Loadable modules   Catalin Marinas
• [PATCH v2 04/31] arm64: MMU definitions   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• imx6q restart is broken   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v2 26/31] arm64: Miscellaneous library functions   Catalin Marinas
• [PATCH v2 04/31] arm64: MMU definitions   Catalin Marinas
• [PATCH v2 15/31] arm64: SMP support   Catalin Marinas
• [PATCH v2 30/31] arm64: Build infrastructure   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v2 09/31] arm64: Cache maintenance routines   Catalin Marinas
• [PATCH v2 05/31] arm64: MMU initialisation   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v2 06/31] arm64: MMU fault handling and page table management   Catalin Marinas
• [PATCH v2 07/31] arm64: Process management   Catalin Marinas
• [PATCH v2 08/31] arm64: CPU support   Catalin Marinas
• [PATCH v2 08/31] arm64: CPU support   Catalin Marinas
• [PATCH v2 08/31] arm64: CPU support   Catalin Marinas
• [PATCH v2 14/31] arm64: DMA mapping API   Catalin Marinas
• [PATCH v2 14/31] arm64: DMA mapping API   Catalin Marinas
• [PATCH v2 16/31] arm64: ELF definitions   Catalin Marinas
• [PATCH v2 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v2 16/31] arm64: ELF definitions   Catalin Marinas
• [PATCH v2 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v2 17/31] arm64: System calls handling   Catalin Marinas
• [PATCH v2 17/31] arm64: System calls handling   Catalin Marinas
• PER_LINUX32, Was: [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Catalin Marinas
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Catalin Marinas
• [PATCH v2 21/31] arm64: 32-bit (compat) applications support   Catalin Marinas
• Vacations.   javier Martin
• [PATCH] media: mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.   javier Martin
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Dave Martin
• kernel entry for thumb2-only cpus   Dave Martin
• [PATCH v2 REPOST 0/4] ARM: opcodes: Facilitate custom opcode injection   Dave Martin
• [PATCH v2 REPOST 1/4] ARM: opcodes: Don't define the thumb32 byteswapping macros for BE32   Dave Martin
• [PATCH v2 REPOST 2/4] ARM: opcodes: Make opcode byteswapping macros assembly-compatible   Dave Martin
• [PATCH v2 REPOST 3/4] ARM: opcodes: Add helpers for emitting custom opcodes   Dave Martin
• [PATCH v2 REPOST 4/4] ARM: opcodes: Opcode definitions for the Virtualization Extensions   Dave Martin
• [PATCH v2 02/23] xen/arm: hypercalls   Dave Martin
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Dave Martin
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Dave Martin
• [PATCH v2 02/23] xen/arm: hypercalls   Dave Martin
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Dave Martin
• [PATCH 04/10] ARM: pass -marm to gcc by default   Dave Martin
• [PATCH] ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible   Dave Martin
• Discontiguous memory and cacheflush   Dave Martin
• Discontiguous memory and cacheflush   Dave Martin
• [PATCH] Visstrim SM10: Use mo_version to decide board video mode.   Javier Martin
• [PATCH v2] Visstrim SM10: Use mo_version to decide board video mode.   Javier Martin
• [PATCH v3] Visstrim SM10: Use mo_version to decide board video mode.   Javier Martin
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Peter Meerwald
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Peter Meerwald
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Peter Meerwald
• [PATCH 0/2] Add device tree support for davinci_mdio driver and fix cpsw DT binding documentation   David Miller
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   David Miller
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   David Miller
• [PATCH 07/11] net/stmmac: mark probe function as __devinit   David Miller
• [PATCH v2] cs89x0 : packet reception not working   David Miller
• How to debug hard lockup issue   Lin Ming
• How to debug hard lockup issue   Lin Ming
• How to debug hard lockup issue   Lin Ming
• How to debug hard lockup issue   Lin Ming
• gpmc generic retime function (subject was RE: [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration)   Mohammed, Afzal
• [GIT PULL 1/5] omap device tree changes for v3.6 merge window   Mohammed, Afzal
• [PATCH v6 00/10] OMAP-GPMC: generic time calc, prepare for driver   Afzal Mohammed
• [PATCH v6 01/10] ARM: OMAP2+: nand: unify init functions   Afzal Mohammed
• [PATCH v6 02/10] ARM: OMAP2+: gpmc: handle additional timings   Afzal Mohammed
• [PATCH v6 03/10] ARM: OMAP2+: onenand: refactor for clarity   Afzal Mohammed
• [PATCH v6 04/10] ARM: OMAP2+: GPMC: Remove unused OneNAND get_freq() platform function   Afzal Mohammed
• [PATCH v6 05/10] ARM: OMAP2+: gpmc: find features by ip rev check   Afzal Mohammed
• [PATCH v6 06/10] ARM: OMAP2+: gpmc: remove cs# in sync clk div calc   Afzal Mohammed
• [PATCH v6 07/10] ARM: OMAP2+: gpmc: generic timing calculation   Afzal Mohammed
• [PATCH v6 08/10] ARM: OMAP2+: onenand: generic timing calculation   Afzal Mohammed
• [PATCH v6 09/10] ARM: OMAP2+: smc91x: generic timing calculation   Afzal Mohammed
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Afzal Mohammed
• gpmc generic retime function (subject was RE: [PATCH v5 3/3] ARM: OMAP2+: onenand: prepare for gpmc driver migration)   Mohammed, Afzal
• [PATCH v3 0/6] omap-am33xx rtc dt support   Mohammed, Afzal
• [PATCH v6 10/10] ARM: OMAP2+: tusb6010: generic timing calculation   Mohammed, Afzal
• [PATCH v6 07/10] ARM: OMAP2+: gpmc: generic timing calculation   Mohammed, Afzal
• [PATCH v6 07/10] ARM: OMAP2+: gpmc: generic timing calculation   Mohammed, Afzal
• [PATCH v6 00/10] OMAP-GPMC: generic time calc, prepare for driver   Mohammed, Afzal
• [PATCH v6 00/10] OMAP-GPMC: generic time calc, prepare for driver   Mohammed, Afzal
• [PATCH v6 07/10] ARM: OMAP2+: gpmc: generic timing calculation   Mohammed, Afzal
• [PATCH] clk: convert ARM RealView to common clk   Pawel Moll
• [PATCH] clk: convert ARM RealView to common clk   Pawel Moll
• [PATCH] clk: convert ARM RealView to common clk   Pawel Moll
• [PATCH] clk: convert ARM RealView to common clk   Pawel Moll
• [PATCH v2 3/6] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 1/7] Initial csb1724 board support (FDT)   Ian Molton
• [PATCH v3 2/7] mv643xx.c: Remove magic numbers.   Ian Molton
• [PATCH v3 3/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 4/7] kirkwood: Add fixups for DT based mv643xx ethernet.   Ian Molton
• [PATCH v3 5/7] csb1724: Enable device tree based mv643xx ethernet support.   Ian Molton
• [PATCH v3 6/7] DT: Convert all kirkwood boards with mv643xx that use DT   Ian Molton
• [PATCH v3 7/7] NET: mv643xx: remove device name macro.   Ian Molton
• [PATCH v3 3/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
• [PATCH 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Ian Molton
• [PATCH 5/6] arm: mvebu: add Aurora L2 Cache Controller to the DT   Ian Molton
• [rtc-linux] [PATCH v3] rtc: snvs: add Freescale rtc-snvs driver   Andrew Morton
• [rtc-linux] [PATCH v3] rtc: snvs: add Freescale rtc-snvs driver   Andrew Morton
• Current state of AM33xx patches   N, Mugunthan V
• Current state of AM33xx patches   N, Mugunthan V
• [PATCH 0/2] Add device tree support for davinci_mdio driver and fix cpsw DT binding documentation   Mugunthan V N
• [PATCH 1/2] drivers: net: ethernet: davince_mdio: device tree implementation   Mugunthan V N
• [PATCH 2/2] documentation: dt: bindings: cpsw: fixing the examples for directly using it in dts file   Mugunthan V N
• ioremap() fail on physical address 0x0 in 3.4 kernel   Murali Nalajala
• ioremap() fail on physical address 0x0 in 3.4 kernel   Murali Nalajala
• ioremap() fail on physical address 0x0 in 3.4 kernel   Murali Nalajala
• [PATCH V2 5/5] arm: samsung: delete frame buffer header files from platform   Sylwester Nawrocki
• [PATCH V4 0/2] arm: samsung: Move FIMD headers to include/video/   Sylwester Nawrocki
• [PATCH 0/3] Removal of obsolete s3c2410_* GPIO API   Sylwester Nawrocki
• [PATCH 1/3] ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API   Sylwester Nawrocki
• [PATCH 2/3] ARM: S3C24XX: Remove obsolete GPIO API declarations   Sylwester Nawrocki
• [PATCH 3/3] gpio-samsung: Remove now unused s3c2410_gpio* API   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock   Sylwester Nawrocki
• [PATCH 0/3] Removal of obsolete s3c2410_* GPIO API   Sylwester Nawrocki
• [PATCH] ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock   Sylwester Nawrocki
• [PATCH] [media] atmel_isi: allocate memory to store the isi platform data.   Sylwester Nawrocki
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Sylwester Nawrocki
• [PATCH 0/2] OMAP cpufreq fixes   Rajendra Nayak
• [PATCH 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Rajendra Nayak
• [PATCH 2/2] ARM: OMAP4: Register the OPP table only for 4430 device   Rajendra Nayak
• [PATCH v2 0/2] OMAP cpufreq fixes   Rajendra Nayak
• [PATCH v2 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Rajendra Nayak
• [PATCH v2 2/2] ARM: OMAP4: Register the OPP table only for 4430 device   Rajendra Nayak
• [PATCH 2/2] ARM: OMAP4: Register the OPP table only for 4430 device   Rajendra Nayak
• [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..   Rajendra Nayak
• [PATCH v4 0/3] Prepare for OMAP2+ movement to Common Clk   Rajendra Nayak
• [PATCH v4 1/3] ARM: omap: clk: add clk_prepare and clk_unprepare   Rajendra Nayak
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [PATCH v4 3/3] ARM: OMAP2+: clock: Remove all direct dereferencing of struct clk   Rajendra Nayak
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Rajendra Nayak
• [PATCH 2/2] dma-buf: add helpers for attacher dma-parms   Michal Nazarewicz
• [alsa-devel] [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode   Ricardo Neri
• [alsa-devel] [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode   Ricardo Neri
• How to get the irq flags from the dts file   Wei Ni
• How to get the irq flags from the dts file   Wei Ni
• How to get the irq flags from the dts file   Wei Ni
• [PATCH 0/6] ARM: tegra: enable wlan for t20 and t30   Wei Ni
• [PATCH 1/6] ARM: tegra: set up wlan clocks for tegra dt   Wei Ni
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Wei Ni
• [PATCH 3/6] ARM: dt: t20 seaboard: turn on the power for wlan   Wei Ni
• [PATCH 4/6] ARM: dt: t20 ventana: set pinmux and power for wlan   Wei Ni
• [PATCH 5/6] ARM: dt: t30 cardhu: set pinmux and power for wlan   Wei Ni
• [PATCH 6/6] ARM: tegra: enable wireless in defconfig   Wei Ni
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Wei Ni
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Wei Ni
• Can one set GPIO direction in pinmux definition?   Subodh Nijsure
• Can one set GPIO direction in pinmux definition?   Subodh Nijsure
• [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Jarkko Nikula
• [alsa-devel] [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Jarkko Nikula
• [PATCH 00/11] ARM/ASoC: OMAP McBSP device tree support   Jarkko Nikula
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Jarkko Nikula
• [alsa-devel] DT support for Davinci ASoC platform   Sekhar Nori
• [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Sekhar Nori
• [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Sekhar Nori
• [PATCH v2 06/10] ARM: davinci: don't use broken ntosd2_init_i2c   Sekhar Nori
• [PATCH v3 0/6] omap-am33xx rtc dt support   Sekhar Nori
• [PATCH] arm:davinci: clk - migrate to new common clock API   Sekhar Nori
• [PATCH 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Sekhar Nori
• [PATCH 2/2] ARM: da850/omap-l138: Add EVM specific code for VPIF to work   Sekhar Nori
• [PATCH 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Sekhar Nori
• [PATCH 1/5] ASoC/ARM: Davinci: McASP: split asp header into platform and audio specific   Sekhar Nori
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Sekhar Nori
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Sekhar Nori
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Sekhar Nori
• [GIT PULL] Update LZO compression   Markus F.X.J. Oberhumer
• [GIT PULL] Update LZO compression   Markus F.X.J. Oberhumer
• PATCH Add support for the Iomega IX2-200 Device Tree   Ownerx35
• [PATCH 00/14] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/14] ARM: at91: gpio: implement request and free   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/14] at91: regroup gpio and pinctrl under a simple-bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] arm: at91: at91sam9x5: fix gpio number per bank   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/14] ARM: at91: add dummies pinctrl for non dt platform   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/14] arm: at91: dt: at91sam9 add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] arm: at91: dt: at91sam9 add serial pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] tty: atmel_serial: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] arm: at91: dt: sam9m10g45ek: use rts/cts pinctrl group for uart1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/14] arm: at91: dt: sam9263ek: use rts/cts pinctrl group for uart0   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/14] arm: at91: dt: sam9g20ek: use rts/cts/dtr/dsr/dcd/ri pinctrl group for uart0   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/14] MTD: atmel nand: fix gpio missing request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/14] arm: at91: dt: at91sam9 add nand pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/14] MTD: atmel_nand: add pinctrl consumer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: fix drivers broken because of sparse irq support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/23] work in progress: SPI controller w/DMA SAM9X5   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/14] arm: at91: dt: at91sam9 add nand pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] arm: sam9_l9260_defconfig: adjust UBI bad eraseblocks limit   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/14] arm: at91: dt: at91sam9 add nand pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] arm: at91: at91sam9x5: fix gpio number per bank   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: at91: automatically select DT support for sam9x5 and sam9n12   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/14] arm: at91: dt: at91sam9 add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: select DT support by default   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: select DT support by default   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] i2c: at91: add new fixes for some TWI ip versions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ASoC: atmel-ssc: include linux/io.h for raw io   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/10] ARM: at91: explicitly include mach/gpio.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/10] serial: atmel: add explict mach/gpio.h include   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] ARM: dts: add twi nodes for atmel SOCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] ARM: dts: add twi nodes for atmel boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/10] serial: atmel: add explict mach/gpio.h include   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] printk: add option to print cpu id   Pandita, Vikram
• [PATCH v3] printk: add option to print cpu id   Vikram Pandita
• [PATCH v3] printk: add option to print cpu id   Pandita, Vikram
• [PATCH v3] printk: add option to print cpu id   Pandita, Vikram
• [PATCH v3] printk: add option to print cpu id   Pandita, Vikram
• [PATCH v3] printk: add option to print cpu id   Pandita, Vikram
• [PATCH v3] printk: add option to print cpu id   Pandita, Vikram
• [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH 3/5] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH 4/5] ARM: S3C64XX: Enabling sec_usbphy driver   Praveen Paneri
• [PATCH 5/5] ARM: Exynos4210: Enabling sec_usbphy driver   Praveen Paneri
• [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v2 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v2 3/5] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v2 4/5] ARM: S3C64XX: Enabling samsung_usbphy driver   Praveen Paneri
• [PATCH v2 5/5] ARM: Exynos4210: Enabling samsung_usbphy driver   Praveen Paneri
• [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v2 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v3 3/5] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v3 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v3 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v4 2/5] usb: s3c-hsotg: Adding phy driver support   Praveen Paneri
• [PATCH v4 3/5] ARM: S3C64XX: Removing old phy setup code   Praveen Paneri
• [PATCH v4 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v4 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Praveen Paneri
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Praveen Paneri
• [PATCH v3 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver   Praveen Paneri
• [PATCH v3 0/4] Add support to enable ARM PMU for EXYNOS   Chanho Park
• [PATCH v3 1/4] ARM: EXYNOS: Add set_irq_affinity function for combiner_irq   Chanho Park
• [PATCH v3 2/4] ARM: EXYNOS: Correct combined IRQs for exynos4412   Chanho Park
• [PATCH v3 3/4] ARM: EXYNOS: Enable PMUs for exynos4   Chanho Park
• [PATCH v3 4/4] ARM: EXYNOS: Add arm-pmu DT binding for exynos5250   Chanho Park
• [PATCH v3 3/4] ARM: EXYNOS: Enable PMUs for exynos4   Chanho Park
• [PATCH v3 3/4] ARM: EXYNOS: Enable PMUs for exynos4   Chanho Park
• [PATCH v3 2/4] ARM: EXYNOS: Correct combined IRQs for exynos4412   Chanho Park
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Kyungmin Park
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Kyungmin Park
• [PATCH] ARM: EXYNOS: Add USB HSIC device   Kyungmin Park
• [PATCH v4 1/2] ARM: Make a compile firmware conditionally   Kyungmin Park
• [PATCH v4 2/2] ARM: EXYNOS: SMC instruction (aka firmware) support   Kyungmin Park
• [PATCH v5 1/2] ARM: Make a compile firmware conditionally   Kyungmin Park
• [PATCH v5 2/2] ARM: EXYNOS: SMC instruction (aka firmware) support   Kyungmin Park
• [PATCH v5 2/2] ARM: EXYNOS: SMC instruction (aka firmware) support   Kyungmin Park
• [PATCH 1/3] ARM: EXYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Kyungmin Park
• [PATCH] ARM: EXYNOS: Use non-secure MDMA1   Kyungmin Park
• [PATCH 0/6] ARM: EXYNOS: Add support for Trats board using device tree   Kyungmin Park
• [PATCH 1/2] ARM: exynos: delete redundant HAVE_SCHED_CLOCK option in Kconfig   Kyungmin Park
• [PATCH 1/2] ARM: exynos: delete redundant HAVE_SCHED_CLOCK option in Kconfig   Kyungmin Park
• [RESUBMIT PATCH] ASoC: SAMSUNG: Change Kconfig to support all SAMSUNG ASoC   Sangsu Park
• [PATCH] ASoC: SAMSUNG: Add SND_SOC_DAIFMT_CONT option for snd_soc_set_fmt()   Sangsu Park
• problems with external initramfs passed to device tree kernel   Ben Peddell
• [PATCH] initramfs: handle trailing junk after valid image   Ben Peddell
• [PATCH 1/1] initramfs: handle trailing junk after valid image (try 2)   Ben Peddell
• Problem: CONFIG_KALLSYMS is not set + kernel/module.c   Veli-Pekka Peltola
• [PATCH] cs89x0 : packet reception not working   Joe Perches
• [PATCH] arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs   Thomas Petazzoni
• arm: mvebu: Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH 1/4] arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option   Thomas Petazzoni
• [PATCH 2/4] arm: plat-orion: make bridge_virt_base non-const to support DT use case   Thomas Petazzoni
• [PATCH 3/4] arm: mvebu: add basic address decoding support to Armada 370/XP   Thomas Petazzoni
• [PATCH 4/4] arm: mvebu: add address decoding controller to the DT   Thomas Petazzoni
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Thomas Petazzoni
• [PATCH 2/4] arm: plat-orion: make bridge_virt_base non-const to support DT use case   Thomas Petazzoni
• [v2] arm: mvebu: Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH 1/5] arm: plat-orion: use 'void __iomem *' in addr-map code   Thomas Petazzoni
• [PATCH 2/5] arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option   Thomas Petazzoni
• [PATCH 3/5] arm: plat-orion: make bridge_virt_base non-const to support DT use case   Thomas Petazzoni
• [PATCH 4/5] arm: mvebu: add basic address decoding support to Armada 370/XP   Thomas Petazzoni
• [PATCH 5/5] arm: mvebu: add address decoding controller to the DT   Thomas Petazzoni
• arm: mvebu: Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH] [RFC] arm: add documentation describing Marvell families of SoC   Thomas Petazzoni
• [PATCH] [RFC] arm: add documentation describing Marvell families of SoC   Thomas Petazzoni
• [PATCH] arm: add documentation describing Marvell families of SoC   Thomas Petazzoni
• [PATCH v2 0/5] Use more asm-generic headers   Thomas Petazzoni
• [PATCH] arm: add documentation describing Marvell families of SoC   Thomas Petazzoni
• [v3] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH 1/5] arm: plat-orion: use 'void __iomem *' in addr-map code   Thomas Petazzoni
• [PATCH 2/5] arm: plat-orion: introduce PLAT_ORION_LEGACY hidden config option   Thomas Petazzoni
• [PATCH 3/5] arm: plat-orion: make bridge_virt_base non-const to support DT use case   Thomas Petazzoni
• [PATCH 4/5] arm: mvebu: add basic address decoding support to Armada 370/XP   Thomas Petazzoni
• [PATCH 5/5] arm: mvebu: add address decoding controller to the DT   Thomas Petazzoni
• [GIT PULL] arm: documentation   Thomas Petazzoni
• gpio: mvebu: new gpio driver for mvebu platforms   Thomas Petazzoni
• [PATCH 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Thomas Petazzoni
• [PATCH 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Thomas Petazzoni
• [PATCH 3/5] arm: mvebu: use GPIO support now that a driver is available   Thomas Petazzoni
• [PATCH 4/5] arm: mvebu: add DT information for GPIO banks on Armada 370 and XP   Thomas Petazzoni
• [PATCH 5/5] arm: mvebu: add gpio support in defconfig   Thomas Petazzoni
• [v2] gpio: mvebu: new gpio driver for mvebu platforms   Thomas Petazzoni
• [PATCH 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Thomas Petazzoni
• [PATCH 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Thomas Petazzoni
• [PATCH 3/5] arm: mvebu: use GPIO support now that a driver is available   Thomas Petazzoni
• [PATCH 4/5] arm: mvebu: add DT information for GPIO banks on Armada 370 and XP   Thomas Petazzoni
• [PATCH 5/5] arm: mvebu: add gpio support in defconfig   Thomas Petazzoni
• [PATCH 1/5] gpio: introduce gpio-mvebu driver for Marvell SoCs   Thomas Petazzoni
• [v3] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Thomas Petazzoni
• [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver   Thomas Petazzoni
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Thomas Petazzoni
• [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig   Thomas Petazzoni
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Thomas Petazzoni
• [v3] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• [v3] Add basic address decoding support for Marvell 370/XP   Thomas Petazzoni
• Preliminary topic proposals for the ARM mini-summit   Thomas Petazzoni
• Preliminary topic proposals for the ARM mini-summit   Thomas Petazzoni
• Fix orion_nand build on ARCH_MVEBU   Thomas Petazzoni
• [PATCH] mtd: orion_nand: remove <mach/hardware.h> include   Thomas Petazzoni
• [PATCH] mtd: orion_nand: remove <mach/hardware.h> include   Thomas Petazzoni
• arm: move plat-orion platform_data headers to the right place   Thomas Petazzoni
• [PATCH 1/8] sound: kirkwood: remove useless <plat/audio.h> include   Thomas Petazzoni
• [PATCH 2/8] sound: kirkwood: move <plat/audio.h> to <linux/platform_data/kirkwood-audio.h>   Thomas Petazzoni
• [PATCH 3/8] usb: ehci-orion: move <plat/ehci-orion.h> to <linux/platform_data/ehci-orion.h>   Thomas Petazzoni
• [PATCH 4/8] mmc: mvsdio: move <plat/mvsdio.h> to <linux/platform_data/mvsdio.h>   Thomas Petazzoni
• [PATCH 5/8] dma: mv_xor: move <plat/mv_xor.h> to <linux/platform_data/mv_xor.h>   Thomas Petazzoni
• [PATCH 6/8] mtd: orion_nand: move <plat/orion_nand.h> to <linux/platform_data/orion_nand.h>   Thomas Petazzoni
• [PATCH 7/8] i2c: mv643xx: move <linux/mv643xx_i2c.h> to <linux/platform_data/mv643xx_i2c.h>   Thomas Petazzoni
• [PATCH 8/8] net: mv643xx_eth: move <linux/mv643xx_eth.h> to <linux/platform_data/mv643xx_eth.h>   Thomas Petazzoni
• arm: move plat-orion platform_data headers to the right place   Thomas Petazzoni
• MX28 & finding out boot mode   Chen Peter-B29397
• MX28 & finding out boot mode   Chen Peter-B29397
• [PATCH v2] printk: add option to print cpu id   Borislav Petkov
• [3.6-rc3 regression] sata_mv cannot get optional clkdev breaking boot on QNAP TS-119P+   Mikael Pettersson
• [3.6-rc3 regression] sata_mv cannot get optional clkdev breaking boot on QNAP TS-119P+   Mikael Pettersson
• [PATCHv4 4/8] ARM: OMAP3: add manual control for mpu / core pwrdm usecounting   Jean Pihet
• [PATCHv7 06/12] ARM: OMAP4: suspend: Program all domains to retention   Jean Pihet
• [PATCH v5 0/8] ARM: OMAP2+: PM: introduce the power domains functional states   Jean Pihet
• [PATCH 1/8] ARM: OMAP2+: PM: introduce power domains functional states   Jean Pihet
• [PATCH 2/8] ARM: OMAP2+: PM: introduce power domains achievable functional states   Jean Pihet
• [PATCH 3/8] ARM: OMAP2+: PM: add a lock to protect the powerdomains next state   Jean Pihet
• [PATCH 4/8] ARM: OMAP2+: PM: use the functional power states API   Jean Pihet
• [PATCH 5/8] ARM: OMAP2+: PM: use power domain functional state in stats counters   Jean Pihet
• [PATCH 6/8] ARM: OMAP2+: PM debug: trace the functional power domains states   Jean Pihet
• [PATCH 7/8] ARM: OMAP2+: powerdomain: add error logs   Jean Pihet
• [PATCH 8/8] ARM: OMAP2+: PM: reorganize the powerdomain API in public and private parts   Jean Pihet
• TI SoC Linux BoF @ Linux Plumbers Conference: tomorrow   Pihet-XID, Jean
• [PATCH v3 4/4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent if available   Laurent Pinchart
• [PATCH v3 4/4] fbdev: sh_mobile_lcdc: use dma_mmap_coherent if available   Laurent Pinchart
• [PATCH 01/22] ARM: add mechanism for late code patching   Nicolas Pitre
• [PATCH 02/22] ARM: use late patch framework for phys-virt patching   Nicolas Pitre
• [PATCH 03/22] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Nicolas Pitre
• [PATCH 04/22] ARM: LPAE: support 64-bit virt/phys patching   Nicolas Pitre
• [PATCH 06/22] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Nicolas Pitre
• [PATCH 07/22] ARM: LPAE: use phys_addr_t in free_memmap()   Nicolas Pitre
• [PATCH 08/22] ARM: LPAE: use phys_addr_t for initrd location and size   Nicolas Pitre
• [PATCH 09/22] ARM: LPAE: use 64-bit pgd physical address in switch_mm()   Nicolas Pitre
• [PATCH 02/22] ARM: use late patch framework for phys-virt patching   Nicolas Pitre
• [PATCH 04/22] ARM: LPAE: support 64-bit virt/phys patching   Nicolas Pitre
• [PATCH 09/22] ARM: LPAE: use 64-bit pgd physical address in switch_mm()   Nicolas Pitre
• kernel entry for thumb2-only cpus   Nicolas Pitre
• [PATCH 01/22] ARM: add mechanism for late code patching   Nicolas Pitre
• kernel entry for thumb2-only cpus   Nicolas Pitre
• kernel entry for thumb2-only cpus   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• kernel entry for thumb2-only cpus   Nicolas Pitre
• [PATCH 01/22] ARM: add mechanism for late code patching   Nicolas Pitre
• [PATCH 01/22] ARM: add mechanism for late code patching   Nicolas Pitre
• [PATCH 01/22] ARM: add mechanism for late code patching   Nicolas Pitre
• kernel entry for thumb2-only cpus   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• [PATCH 04/10] ARM: pass -marm to gcc by default   Nicolas Pitre
• [PATCH 04/10] ARM: pass -marm to gcc by default   Nicolas Pitre
• [PATCH] mutex: place lock in contended state after fastpath_lock failure   Nicolas Pitre
• [PATCH v2 01/22] ARM: add mechanism for late code patching   Nicolas Pitre
• [PATCH v2 02/22] ARM: add self test for runtime patch mechanism   Nicolas Pitre
• [PATCH v2 03/22] ARM: use late patch framework for phys-virt patching   Nicolas Pitre
• [PATCH v2 04/22] ARM: LPAE: use phys_addr_t on virt <--> phys conversion   Nicolas Pitre
• [PATCH v2 05/22] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• [PATCH v2 06/22] ARM: LPAE: use signed arithmetic for mask definitions   Nicolas Pitre
• [PATCH v2 09/22] ARM: LPAE: use phys_addr_t for initrd location and size   Nicolas Pitre
• [PATCH v2 10/22] ARM: LPAE: use phys_addr_t in switch_mm()   Nicolas Pitre
• [PATCH v2 11/22] ARM: LPAE: use 64-bit accessors for TTBR registers   Nicolas Pitre
• [PATCH v2 13/22] ARM: LPAE: factor out T1SZ and TTBR1 computations   Nicolas Pitre
• [PATCH v2 15/22] ARM: mm: use physical addresses in highmem sanity checks   Nicolas Pitre
• [PATCH v2 16/22] ARM: mm: cleanup checks for membank overlap with vmalloc area   Nicolas Pitre
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Nicolas Pitre
• [PATCH v2 02/22] ARM: add self test for runtime patch mechanism   Nicolas Pitre
• [PATCH v2 03/22] ARM: use late patch framework for phys-virt patching   Nicolas Pitre
• [PATCH v2 05/22] ARM: LPAE: support 64-bit virt_to_phys patching   Nicolas Pitre
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Nicolas Pitre
• [PATCH] ARM: mutex: use generic atomic_dec-based implementation for ARMv6+   Nicolas Pitre
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Nicolas Pitre
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Nicolas Pitre
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Nicolas Pitre
• [PATCH] arm: mm: Fix vmalloc overlap check for !HIGHMEM   Nicolas Pitre
• [PATCH 0/6] Integrator devicetree support   Nicolas Pitre
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Nicolas Pitre
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Nicolas Pitre
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Nicolas Pitre
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Nicolas Pitre
• [PATCH] ARM: io: avoid writeback addressing modes for __raw_ accessors   Nicolas Pitre
• ioremap() fail on physical address 0x0 in 3.4 kernel   Nicolas Pitre
• [PATCH 4/4] ARM: kprobes: make more tests conditional   Nicolas Pitre
• [PATCH 0/4] [RFC] ARM: multiplatform: rename all mach headers   Nicolas Pitre
• [PATCH 1/4] [RFC] ARM: autogenerate mach-foo/* and plat-foo/* header redirects   Nicolas Pitre
• [PATCH 2/4] [RFC] ARM: mass move of mach-*/plat-* header files   Nicolas Pitre
• [PATCH 3/4] [RFC] ARM: multiplatform: rename all mach headers   Nicolas Pitre
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Nicolas Pitre
• [PATCH 4/4] ARM: kprobes: make more tests conditional   Nicolas Pitre
• [PATCHv3 4/4] ARM: kprobes: make more tests conditional   Nicolas Pitre
• [PATCH] ARM: decompressor: reset ttbcr for VMSA ARMv7 cores   Nicolas Pitre
• [PATCHv4 4/4] ARM: kprobes: make more tests conditional   Nicolas Pitre
• [PATCH - 2/2] arm: disable caches based on config option   Nicolas Pitre
• [PATCH 0/6] Integrator devicetree support   Nicolas Pitre
• [PATCH 1/2] ARM: split out ATAGS parsing   Nicolas Pitre
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Nicolas Pitre
• Without MACH_ option Early printk (DEBUG_LL)   Nicolas Pitre
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Nicolas Pitre
• [PATCH] hwmon: tmp102: Add device tree support   Sourav Poddar
• [PATCH 0/4] Add device tree data for omap5   Sourav Poddar
• [PATCH 1/4] arm/dts: omap5-evm: Add I2C support   Sourav Poddar
• [PATCH 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Sourav Poddar
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Sourav Poddar
• [PATCH 4/4] arm/dts: omap5-evm: Add bmp085 sensor support   Sourav Poddar
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Poddar, Sourav
• [PATCH] hwmon: tmp102: Add device tree support   Poddar, Sourav
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Sourav Poddar
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Poddar, Sourav
• [PATCHv2 0/4] Add device tree data for omap5   Sourav Poddar
• [PATCHv2 1/4] arm/dts: omap5-evm: Add I2C support   Sourav Poddar
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Sourav Poddar
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Sourav Poddar
• [PATCH 4/4] arm/dts: omap5-evm: Add bmp085 sensor support   Sourav Poddar
• [PATCHv2 3/4] arm/dts: omap5-evm: Add keypad data   Sourav Poddar
• [PATCHv2 4/4] arm/dts: omap5-evm: Add bmp085 sensor support   Sourav Poddar
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Poddar, Sourav
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Poddar, Sourav
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Poddar, Sourav
• [PATCHv2 0/4] Add device tree data for omap5   Poddar, Sourav
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Sourav Poddar
• [PATCH] Documentation: dt: hwmon: Update for tmp102   Sourav Poddar
• [PATCHv3 0/4] Add device tree data for omap5   Sourav Poddar
• [PATCHv3 1/4] arm/dts: omap5-evm: Add I2C support   Sourav Poddar
• [PATCHv3 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Sourav Poddar
• [PATCHv3 3/4] arm/dts: omap5-evm: Add keypad data   Sourav Poddar
• [PATCHv3 4/4] arm/dts: omap5-evm: Add bmp085 sensor support   Sourav Poddar
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Poddar, Sourav
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Poddar, Sourav
• [PATCHv3 0/4] Add device tree data for omap5   Poddar, Sourav
• [PATCHv3 0/4] Add device tree data for omap5   Poddar, Sourav
• [PATCH 0/4] Add mfd driver for smsc-ece1099 chip   Sourav Poddar
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Sourav Poddar
• [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver   Sourav Poddar
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad support   Sourav Poddar
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Sourav Poddar
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad support   Poddar, Sourav
• [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver   Poddar, Sourav
• [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver   Poddar, Sourav
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Poddar, Sourav
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Poddar, Sourav
• [PATCHv3 0/4] Add device tree data for omap5   Poddar, Sourav
• [alsa-devel] DT support for Davinci ASoC platform   Porter, Matt
• [PATCH 0/3] DaVinci DMA engine conversion   Matt Porter
• [PATCH 1/3] dmaengine: add TI EDMA DMA engine driver   Matt Porter
• [PATCH 2/3] mmc: davinci_mmc: convert to DMA engine API   Matt Porter
• [PATCH 3/3] spi: spi-davinci: convert to DMA engine API   Matt Porter
• [PATCH 1/3] dmaengine: add TI EDMA DMA engine driver   Matt Porter
• [PATCH 1/3] dmaengine: add TI EDMA DMA engine driver   Matt Porter
• [PATCH v2 0/3] DaVinci DMA engine conversion   Matt Porter
• [PATCH v2 1/3] dmaengine: add TI EDMA DMA engine driver   Matt Porter
• [PATCH v2 2/3] mmc: davinci_mmc: convert to DMA engine API   Matt Porter
• [PATCH v2 3/3] spi: spi-davinci: convert to DMA engine API   Matt Porter
• [PATCH v2 3/3] spi: spi-davinci: convert to DMA engine API   Matt Porter
• [PATCH v2 1/3] dmaengine: add TI EDMA DMA engine driver   Matt Porter
• [PATCH v2 1/3] dmaengine: add TI EDMA DMA engine driver   Matt Porter
• [PATCH v3 0/3] DaVinci DMA engine conversion   Matt Porter
• [PATCH v3 1/3] dmaengine: add TI EDMA DMA engine driver   Matt Porter
• [PATCH v3 2/3] mmc: davinci_mmc: convert to DMA engine API   Matt Porter
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Matt Porter
• [PATCH v3 3/3] spi: spi-davinci: convert to DMA engine API   Matt Porter
• [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCH 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCH 3/8] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCH 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCH 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• Platform data from devicetree   Tony Prisk
• Platform data from devicetree   Tony Prisk
• [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv2 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCHv2 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCHv2 3/8] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCHv2 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCHv2 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCHv2 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCHv2 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCHv2 8/8] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv3 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv3 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCHv3 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCHv3 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCHv3 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCHv3 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCHv3 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for   Tony Prisk
• [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH 1/1] clk: add DT support for clock gating control   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [RFC][PATCH] Disintegrate sharpsl_param.c   Richard Purdie
• [PATCH] perf: Use pre-empt safe cpu_get/put insted of smp_processor_id   Roger Quadros
• [PATCH 1/1] ARM: Fix mapping in alloc_init_section for unaligned addresses.   R, Sricharan
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   R, Sricharan
• [RFC PATCH] ARM: LPAE: Fix alloc_init_section to flush all the pmd entries.   R, Sricharan
• [PATCH 20/24] xen: update xen_add_to_physmap interface   Mukesh Rathor
• [PATCH v2 30/31] arm64: Build infrastructure   Sam Ravnborg
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 09/10] of: Add of_pci_parse_ranges()   Thierry Reding
• [PATCH v3 12/32] PCI/ARM: use PCIe capabilities access functions to simplify implementation   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Thierry Reding
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Thierry Reding
• [PATCH] ASoC: samsung dma - prepare dma in start/resume trigger path   Dylan Reid
• [PATCH] ASoC: samsung dma - prepare dma in start/resume trigger path   Dylan Reid
• [alsa-devel] [PATCH] ASoC: samsung dma - prepare dma in start/resume trigger path   Dylan Reid
• [alsa-devel] [PATCH] ASoC: samsung dma - prepare dma in start/resume trigger path   Dylan Reid
• [PATCH] ASoC: samsung dma - Don't indicate support for pause/resume.   Dylan Reid
• [PATCH v3 0/3] DaVinci DMA engine conversion   Tom Rini
• [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28   Maxime Ripard
• [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree   Maxime Ripard
• [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree   Maxime Ripard
• [PATCHv3 0/4]   Maxime Ripard
• [PATCH 1/4] video: Add support for the Solomon SSD1307 OLED Controller   Maxime Ripard
• [PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28   Maxime Ripard
• [PATCH 3/4] ARM: dts: mxs: Add pwm4 muxing options for imx28   Maxime Ripard
• [PATCH 4/4] ARM: dts: mxs: add oled support for the cfa-10036   Maxime Ripard
• [PATCH] ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board   Maxime Ripard
• [PATCH 4/4] ARM: dts: mxs: add oled support for the cfa-10036   Maxime Ripard
• [PATCHv2] Introduce the CFA-10049 expansion board   Maxime Ripard
• [PATCH 1/2] ARM: dts: mxs: Add alternative I2C muxing options for imx28   Maxime Ripard
• [PATCH 2/2] ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board   Maxime Ripard
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Guenter Roeck
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Guenter Roeck
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Guenter Roeck
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Guenter Roeck
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Guenter Roeck
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Guenter Roeck
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Guenter Roeck
• [PATCH] Documentation: dt: hwmon: Update for tmp102   Guenter Roeck
• [PATCH] spi/s3c64xx: Drop extra calls to spi_master_get in suspend/remove functions   Guenter Roeck
• [PATCH] spi/s3c64xx: Drop extra calls to spi_master_get in suspend/remove functions   Guenter Roeck
• [PATCH] spi/s3c64xx: Drop extra calls to spi_master_get in suspend/remove functions   Guenter Roeck
• [PATCH 07/11] net/stmmac: mark probe function as __devinit   Stefan Roese
• [PATCH v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property   Stefan Roese
• Discontiguous memory and cacheflush   Martin Rosenberg
• Discontiguous memory and cacheflush   Martin Rosenberg
• [PATCH v3] printk: add option to print cpu id   Steven Rostedt
• [PATCH 1/6] ARM: mxs: tx28: reset fec phy for device tree boot   Otavio Salvador
• [PATCH v2 0/2] imx6q: pwm: Activate stop_mode and configure pinmux   HACHIMI Samir
• [PATCH v2 1/2] imx6q: pwm: Add device tree support   HACHIMI Samir
• [PATCH v2 2/2] Enable Stop_enable mode during configuration of pwm.   HACHIMI Samir
• [2/3][PATCH][v2] TDM Framework   Singh Sandeep-B37400
• [PATCHv7 00/24] I2C big cleanup   Wolfram Sang
• [PATCH 1/1 v4] i2c: Add default configuration into the Nomadik I2C driver.   Wolfram Sang
• [PATCH 1/1 v4] i2c: Add default configuration into the Nomadik I2C driver.   Wolfram Sang
• [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error   Wolfram Sang
• [PATCH v7] ARM: davinci: i2c: add OF support   Wolfram Sang
• MX28 & finding out boot mode   Wolfram Sang
• MX28 & finding out boot mode   Wolfram Sang
• MX28 & finding out boot mode   Wolfram Sang
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Wolfram Sang
• [PATCH V2 0/5] arm: samsung: Move FIMD headers to include/video/   Florian Tobias Schandinat
• [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Heiko Schocher
• [PATCH v7] ARM: davinci: i2c: add OF support   Heiko Schocher
• [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Robert Schwebel
• [PATCH] media: mx2_camera: Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags.   Robert Schwebel
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Robert Schwebel
• [PATCH 0/4] Remove Genesi Efika MX support   Matt Sealey
• [PATCH 1/4] efikamx: remove support for Genesi Efika MX from the build   Matt Sealey
• [PATCH 2/4] efikamx: remove Genesi Efika MX from the i.MX v6/v7 defconfig   Matt Sealey
• [PATCH 3/4] efikamx: remove Genesi Efika MX platform files from the tree   Matt Sealey
• [PATCH 4/4] efikamx: remove Efika MX-specific CHRGVBUS hack from the USB driver   Matt Sealey
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Matt Sealey
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Matt Sealey
• kernel entry for thumb2-only cpus   Matt Sealey
• kernel entry for thumb2-only cpus   Matt Sealey
• kernel entry for thumb2-only cpus   Matt Sealey
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Matt Sealey
• [PATCH 2/2] ARM i.MX5: Hard reset the IPU during startup   Matt Sealey
• kernel entry for thumb2-only cpus   Matt Sealey
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Matt Sealey
• [PATCH] ARM: print an early warning if the ATAG_CORE/OF_DT_MAGIC vet did not pass   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• kernel entry for thumb2-only cpus   Matt Sealey
• [PATCH 0/2] ARM: imx: change building of SSI FIQ support for i.MX processors   Matt Sealey
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Matt Sealey
• [PATCH 2/2] ARM: only build ssi-fiq.S et al if CONFIG_SND_IMX_SOC_PCM_FIQ is selected   Matt Sealey
• [PATCH 2/2] ARM i.MX5: Hard reset the IPU during startup   Matt Sealey
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Matt Sealey
• Kernels on Bad Firmware (was Re: kernel entry for thumb2-only cpus)   Matt Sealey
• kernel entry for thumb2-only cpus   Matt Sealey
• Kernels on Bad Firmware (was Re: kernel entry for thumb2-only cpus)   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Matt Sealey
• [PATCH 1/2] ARM: build ssi-fiq.S in ARM mode to prevent CONFIG_THUMB2_KERNEL build breakage   Matt Sealey
• imx6q restart is broken   Matt Sealey
• imx6q restart is broken   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Matt Sealey
• [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree   Matt Sealey
• [PATCH] ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible   Matt Sealey
• [PATCH] ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible   Matt Sealey
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• imx6q restart is broken   Matt Sealey
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• [PATCH 1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC   Matt Sealey
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• i.MX27 SLCDC driver   Matt Sealey
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• Can one set GPIO direction in pinmux definition?   Matt Sealey
• [PATCH 1/2] imx6q: Configure the pwm node for pinmux support   Matt Sealey
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Matt Sealey
• [PATCH 2/2] dma-buf: add helpers for attacher dma-parms   Semwal, Sumit
• [PATCH] arm: dts: remove partial parameter in at91sam9g25ek.dts   Bo Shen
• [PATCH] mtd: use %*ph[CN] to dump small buffers   Andy Shevchenko
• [PATCH v2 3/3] ARM: imx_v6_v7_defconfig: Select MXS_DMA   Huang Shijie
• [PATCH V2] serial: mxs-auart: fix the wrong RTS hardware flow control   Huang Shijie
• [PATCH] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v2] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v3] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v3] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v4] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v2] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v3] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v4] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v4] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v4] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH v2] mtd: gpmi: add NAND write verify support   Huang Shijie
• [PATCH] mtd: kill MTD_NAND_VERIFY_WRITE   Huang Shijie
• [PATCH] kconfig: remove CONFIG_MTD_NAND_VERIFY_WRITE   Huang Shijie
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Shilimkar, Santosh
• [PATCH 1/3] ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus   Shilimkar, Santosh
• [PATCH] ARM: formalize an IPI for CPU wake-ups   Shilimkar, Santosh
• [PATCH 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Shilimkar, Santosh
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   Shilimkar, Santosh
• [PATCH 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Shilimkar, Santosh
• [PATCH] ARM: OMAP4: sleep: Save the complete used register stack frame   Shilimkar, Santosh
• [PATCH v2 2/2] ARM: OMAP4: Register the OPP table only for 4430 device   Shilimkar, Santosh
• [PATCH v2] gpio/omap: add *remove* callback in platform_driver   Shilimkar, Santosh
• [PATCH] Allow memblock steal operations to remove memory from anywhere   Shilimkar, Santosh
• [PATCH v4 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCHv2 0/4] Add device tree data for omap5   Shilimkar, Santosh
• [PATCH v5 0/8] ARM: OMAP2+: PM: introduce the power domains functional states   Shilimkar, Santosh
• [PATCH v5 0/8] ARM: OMAP2+: PM: introduce the power domains functional states   Shilimkar, Santosh
• [PATCH v4 4/4] memory: emif: add device tree support to emif driver   Shilimkar, Santosh
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Santosh Shilimkar
• [PATCH v2 09/31] arm64: Cache maintenance routines   Santosh Shilimkar
• [PATCH v2 05/31] arm64: MMU initialisation   Santosh Shilimkar
• [PATCH v2 02/31] arm64: Kernel booting and initialisation   Shilimkar, Santosh
• [PATCH v2 09/31] arm64: Cache maintenance routines   Shilimkar, Santosh
• [PATCH v2 28/31] arm64: Generic timers support   Santosh Shilimkar
• [PATCH v2 05/31] arm64: MMU initialisation   Shilimkar, Santosh
• [RFC/PATCH 05/13] serial: omap: drop DMA support   Shilimkar, Santosh
• [RFC/PATCH 05/13] serial: omap: drop DMA support   Shilimkar, Santosh
• [RFC/PATCH 10/13] serial: omap: stick to put_autosuspend   Shilimkar, Santosh
• [RFC/PATCH 00/13] OMAP UART patches   Shilimkar, Santosh
• [RFC/PATCH 10/13] serial: omap: stick to put_autosuspend   Shilimkar, Santosh
• [PATCH 2/6] ARM: omap: allow building omap44xx without SMP   Shilimkar, Santosh
• [PATCH 2/6] ARM: omap: allow building omap44xx without SMP   Shilimkar, Santosh
• [PATCH 2/6] ARM: omap: allow building omap44xx without SMP   Shilimkar, Santosh
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Shilimkar, Santosh
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Shilimkar, Santosh
• [PATCH 1/1] mmc: host: enable OMAP DMA engine support for omap hosts by default   Shilimkar, Santosh
• [PATCH] ARM: ux500: set proper GIC flags   Shilimkar, Santosh
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Shilimkar, Santosh
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Shilimkar, Santosh
• [PATCH] ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER   Shilimkar, Santosh
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Shilimkar, Santosh
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Shilimkar, Santosh
• [PATCH] arm: omap: ratelimit omap_l3_smx error log spam   Shilimkar, Santosh
• [PATCH - 2/2] arm: disable caches based on config option   Shilimkar, Santosh
• [PATCH v2 6/9] misc: Generic on-chip SRAM allocation driver   Shilimkar, Santosh
• [PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx   Joonyoung Shim
• [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Joonyoung Shim
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path   Alexander Shishkin
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Alexander Shishkin
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Alexander Shishkin
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path   Alexander Shishkin
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Alexander Shishkin
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path   Alexander Shishkin
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Alexander Shishkin
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Alexander Shishkin
• [PATCH 1/4] ARM: clps711x: Remove board support for CEIVA   Alexander Shiyan
• [PATCH 2/4] ARM: clps711x: Fix register definitions   Alexander Shiyan
• [PATCH 3/4] ARM: clps711x: Fix lowlevel debug-macro   Alexander Shiyan
• [PATCH 4/4] ARM: clps711x: Added simple clock framework   Alexander Shiyan
• [PATCH] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH] GPIO: Add support for GPIO on CLPS711X-target platform   Alexander Shiyan
• [PATCH] ARM: clps711x: convert to clocksource/clockevents   Alexander Shiyan
• [PATCH] ARM: clps711x: convert to clocksource/clockevents   Alexander Shiyan
• [PATCH 06/22] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Sergei Shtylyov
• [PATCH 1/4] arm/dts: omap5-evm: Add I2C support   Sergei Shtylyov
• [PATCH] initramfs: handle trailing junk after valid image   Sergei Shtylyov
• [PATCH 0/4] i2c: omap: few more patches   Shubhrajyoti
• [PATCH 4/4] i2c: omap: switch over to autosuspend API   Shubhrajyoti
• [PATCH] Visstrim SM10: Use mo_version to decide board video mode.   Baruch Siach
• [PATCH v2] Visstrim SM10: Use mo_version to decide board video mode.   Baruch Siach
• [PATCH] drivers/watchdog: Adding PRCMU based WD for ux500 processors   Baruch Siach
• [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301   Sebastian Andrzej Siewior
• [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301   Sebastian Andrzej Siewior
• [PATCH v3 1/2] ARM: PRIMA2: convert to common clk and finish full clk tree   Barry Song
• [PATCH v3 2/2] clk: prima2: move from arch/arm/mach to drivers/clk   Barry Song
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Barry Song
• [PATCH v4 1/2] ARM: PRIMA2: convert to common clk and finish full clk tree   Barry Song
• [PATCH v4 2/2] clk: prima2: move from arch/arm/mach to drivers/clk   Barry Song
• [PATCH 0/3] ARM: PRIMA2: some patches prepared to support new SiRF SoCs   Barry Song
• [PATCH 1/3] ARM: PRIMA2: use DT_MACHINE_START and convert to generic board   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [PATCH 3/3] ARM: SIRF: make sirf irqchip driver selectable since new SoCs will have GIC   Barry Song
• [PATCH 1/3] ARM: PRIMA2: use DT_MACHINE_START and convert to generic board   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [PATCH 1/3] ARM: PRIMA2: use DT_MACHINE_START and convert to generic board   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [PATCH v4 1/2] ARM: PRIMA2: convert to common clk and finish full clk tree   Barry Song
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Barry Song
• [PATCH] drivers/dma/sirf-dma.c: fix usage of devm functions   Barry Song
• [PATCH 0/3] pinctrl: sirf: add DT binding pinmux mapping support   Barry Song
• [PATCH 1/3] ARM: PRIMA2: add missing interrupts property for pinctrl node   Barry Song
• [PATCH 2/3] ARM: PRIMA2: rename prima2-cb.dts to prima2.dtsi as it only has SoC features   Barry Song
• [PATCH 3/3] pinctrl: sirf: add DT-binding pinmux mapping support   Barry Song
• [PATCH RESEND 3/3] pinctrl: sirf: add DT-binding pinmux mapping support   Barry Song
• [PATCH 3/3] pinctrl: sirf: add DT-binding pinmux mapping support   Barry Song
• [PATCH v2 0/3] ARM: PRIMA2: some patches prepared to support new SiRF SoCs   Barry Song
• [PATCH v2 1/3] ARM: PRIMA2: use DT_MACHINE_START and convert to generic board   Barry Song
• [PATCH v2 2/3] ARM: PRIMA2: adjust Kconfig to support select SoC features   Barry Song
• [PATCH v2 3/3] ARM: SIRF: make sirf irqchip driver optional since new SoCs will have GIC   Barry Song
• [PATCH] ARM: PRIMA2: rstc: use of_property_read_u32 to replace of_get_property and be32_to_cpup   Barry Song
• [PATCH v2 0/3] ARM: PRIMA2: some patches prepared to support new SiRF SoCs   Barry Song
• [PATCH 4/13] i2c: sirf: use clk_prepare_enable and clk_disable_unprepare   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [GIT PULL] CSR SiRFmarco preparing patches   Barry Song
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Barry Song
• [PATCH 1/2] ARM: exynos: delete redundant HAVE_SCHED_CLOCK option in Kconfig   Barry Song
• [PATCH 2/2] ARM: timer_sp804: delete redundant HAVE_SCHED_CLOCK option in Kconfig   Barry Song
• [PATCH 1/2] ARM: exynos: delete redundant HAVE_SCHED_CLOCK option in Kconfig   Barry Song
• [RFC/PATCH] ARM: PRIMA2: initial support for SiRFmarco dual-core SoC   Barry Song
• ioremap() fail on physical address 0x0 in 3.4 kernel   Trilok Soni
• How to get the irq flags from the dts file   Arend van Spriel
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Arend van Spriel
• [PATCH 1/1] ARM: Fix mapping in alloc_init_section for unaligned addresses.   R Sricharan
• [PATCH v2 1/1] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses.   R Sricharan
• [RFC PATCH] ARM: LPAE: Fix alloc_init_section to flush all the pmd entries.   R Sricharan
• [PATCH 07/24] xen/arm: Xen detection and shared_info page mapping   Stefano Stabellini
• [PATCH 05/24] xen/arm: empty implementation of grant_table arch specific functions   Stefano Stabellini
• [PATCH 08/24] xen/arm: Introduce xen_pfn_t for pfn and mfn types   Stefano Stabellini
• [PATCH 23/24] hvc_xen: allow dom0_write_console for HVM guests   Stefano Stabellini
• [PATCH 21/24] arm/v2m: initialize arch_timers even if v2m_timer is not present   Stefano Stabellini
• [Xen-devel] [PATCH 04/24] xen/arm: sync_bitops   Stefano Stabellini
• [PATCH 20/24] xen: update xen_add_to_physmap interface   Stefano Stabellini
• [PATCH 18/24] xen/arm: compile blkfront and blkback   Stefano Stabellini
• [PATCH 13/24] xen/arm: get privilege status   Stefano Stabellini
• [PATCH 14/24] xen/arm: initialize grant_table on ARM   Stefano Stabellini
• [PATCH 15/24] xen/arm: receive Xen events on ARM   Stefano Stabellini
• [Xen-devel] [PATCH 01/24] arm: initial Xen support   Stefano Stabellini
• [Xen-devel] [PATCH 01/24] arm: initial Xen support   Stefano Stabellini
• [PATCH 09/24] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v2 00/23] Introduce Xen support on ARM   Stefano Stabellini
• [PATCH v2 01/23] arm: initial Xen support   Stefano Stabellini
• [PATCH v2 02/23] xen/arm: hypercalls   Stefano Stabellini
• [PATCH v2 03/23] xen/arm: page.h definitions   Stefano Stabellini
• [PATCH v2 04/23] xen/arm: sync_bitops   Stefano Stabellini
• [PATCH v2 05/23] xen/arm: empty implementation of grant_table arch specific functions   Stefano Stabellini
• [PATCH v2 06/23] xen: missing includes   Stefano Stabellini
• [PATCH v2 07/23] xen/arm: Xen detection and shared_info page mapping   Stefano Stabellini
• [PATCH v2 08/23] xen/arm: Introduce xen_pfn_t for pfn and mfn types   Stefano Stabellini
• [PATCH v2 09/23] xen/arm: Introduce xen_ulong_t for unsigned long   Stefano Stabellini
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v2 11/23] xen: do not compile manage, balloon, pci, acpi and cpu_hotplug on ARM   Stefano Stabellini
• [PATCH v2 12/23] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v2 13/23] xen/arm: get privilege status   Stefano Stabellini
• [PATCH v2 14/23] xen/arm: initialize grant_table on ARM   Stefano Stabellini
• [PATCH v2 15/23] xen/arm: receive Xen events on ARM   Stefano Stabellini
• [PATCH v2 16/23] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Stefano Stabellini
• [PATCH v2 17/23] xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree   Stefano Stabellini
• [PATCH v2 18/23] xen: allow privcmd for HVM guests   Stefano Stabellini
• [PATCH v2 19/23] xen/arm: compile blkfront and blkback   Stefano Stabellini
• [PATCH v2 20/23] xen/arm: compile netback   Stefano Stabellini
• [PATCH v2 21/23] xen: update xen_add_to_physmap interface   Stefano Stabellini
• [PATCH v2 22/23] arm/v2m: initialize arch_timers even if v2m_timer is not present   Stefano Stabellini
• [PATCH v2 23/23] [HACK] xen/arm: implement xen_remap_domain_mfn_range   Stefano Stabellini
• [Xen-devel] [PATCH v2 07/23] xen/arm: Xen detection and shared_info page mapping   Stefano Stabellini
• [PATCH v2 01/23] arm: initial Xen support   Stefano Stabellini
• [PATCH v2 03/23] xen/arm: page.h definitions   Stefano Stabellini
• [PATCH v2 06/23] xen: missing includes   Stefano Stabellini
• [PATCH v2 09/23] xen/arm: Introduce xen_ulong_t for unsigned long   Stefano Stabellini
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v2 21/23] xen: update xen_add_to_physmap interface   Stefano Stabellini
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v2 15/23] xen/arm: receive Xen events on ARM   Stefano Stabellini
• [PATCH v2 02/23] xen/arm: hypercalls   Stefano Stabellini
• [PATCH v3 00/23] Introduce Xen support on ARM   Stefano Stabellini
• [PATCH v3 01/25] arm: initial Xen support   Stefano Stabellini
• [PATCH v3 02/25] xen/arm: hypercalls   Stefano Stabellini
• [PATCH v3 03/25] xen/arm: page.h definitions   Stefano Stabellini
• [PATCH v3 04/25] xen/arm: sync_bitops   Stefano Stabellini
• [PATCH v3 05/25] xen/arm: empty implementation of grant_table arch specific functions   Stefano Stabellini
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH v3 07/25] xen/arm: Xen detection and shared_info page mapping   Stefano Stabellini
• [PATCH v3 08/25] xen/arm: Introduce xen_pfn_t for pfn and mfn types   Stefano Stabellini
• [PATCH v3 09/25] xen/arm: Introduce xen_ulong_t for unsigned long   Stefano Stabellini
• [PATCH v3 10/25] xen/arm: compile and run xenbus   Stefano Stabellini
• [PATCH v3 11/25] xen: do not compile manage, balloon, pci, acpi and cpu_hotplug on ARM   Stefano Stabellini
• [PATCH v3 12/25] xen/arm: introduce CONFIG_XEN on ARM   Stefano Stabellini
• [PATCH v3 13/25] xen/arm: get privilege status   Stefano Stabellini
• [PATCH v3 14/25] xen/arm: initialize grant_table on ARM   Stefano Stabellini
• [PATCH v3 15/25] xen/arm: receive Xen events on ARM   Stefano Stabellini
• [PATCH v3 16/25] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Stefano Stabellini
• [PATCH v3 17/25] xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree   Stefano Stabellini
• [PATCH v3 18/25] xen: allow privcmd for HVM guests   Stefano Stabellini
• [PATCH v3 19/25] xen/arm: compile blkfront and blkback   Stefano Stabellini
• [PATCH v3 20/25] xen/arm: compile netback   Stefano Stabellini
• [PATCH v3 21/25] arm/v2m: initialize arch_timers even if v2m_timer is not present   Stefano Stabellini
• [PATCH v3 22/25] xen/arm: use the __HVC macro   Stefano Stabellini
• [PATCH v3 23/25] xen: missing includes   Stefano Stabellini
• [PATCH v3 24/25] xen: update xen_add_to_physmap interface   Stefano Stabellini
• [PATCH v3 25/25] [HACK] xen/arm: implement xen_remap_domain_mfn_range   Stefano Stabellini
• [PATCH 2/2] dma-buf: add helpers for attacher dma-parms   Tomasz Stanislawski
• [PATCH 2/2] dma-buf: add helpers for attacher dma-parms   Tomasz Stanislawski
• [PATCH 03/11] usb/ohci-omap: remove unused variable   Alan Stern
• [GIT PULL] Update LZO compression   Johannes Stezenbach
• [GIT PULL] Update LZO compression   Johannes Stezenbach
• [GIT PULL] Update LZO compression   Johannes Stezenbach
• [GIT PULL] Update LZO compression   Johannes Stezenbach
• [GIT PULL v2] Update LZO compression   Johannes Stezenbach
• [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes   Roland Stigge
• [PATCH] dma: amba-pl08x: Export pl08x_filter_id   Roland Stigge
• [PATCH] dma: amba-pl08x: Export pl08x_filter_id   Roland Stigge
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Roland Stigge
• [PATCH] mtd: lpc32xx_slc: Make driver independent of AMBA DMA engine driver   Roland Stigge
• [PATCH] mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driver   Roland Stigge
• [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes   Roland Stigge
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Roland Stigge
• [PATCH] ARM: LPC32xx: Provide DMA filter callbacks via platform data   Roland Stigge
• [PATCH] USB: isp1301: Remove unused static array and define   Roland Stigge
• [PATCH RESEND 1/2] i2c: pnx: Fix bit definitions   Roland Stigge
• [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301   Roland Stigge
• [PATCH RESEND] mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driver   Roland Stigge
• [PATCH RESEND] mtd: lpc32xx_slc: Make driver independent of AMBA DMA engine driver   Roland Stigge
• [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301   Roland Stigge
• [PATCH 1/2] usb: change the dependency chain for LPC32XX and ISP1301   Roland Stigge
• mxc_nand.c on mach-imx/imx53   Roland Stigge
• [PATCH] ARM: mach-pnx4008: Remove architecture   Roland Stigge
• [PATCH 1/2] mtd: lpc32xx_slc: Cleanup after DT-only conversion   Roland Stigge
• [PATCH 2/2] mtd: lpc32xx_mlc: Cleanup after DT-only conversion   Roland Stigge
• [GIT PULL] ARM: mach-pnx4008: Remove architecture   Roland Stigge
• [PATCH v2] ARM: mach-pnx4008: Remove architecture   Roland Stigge
• [PATCH] video: Remove pnx4008 driver   Roland Stigge
• [PATCH RESEND] mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driver   Roland Stigge
• [GIT PULL] ARM: mach-pnx4008: Remove architecture   Roland Stigge
• mxc_nand.c on mach-imx/imx53   Roland Stigge
• mxc_nand.c on mach-imx/imx53   Roland Stigge
• mxc_nand.c on mach-imx/imx53   Roland Stigge
• [PATCH 0/2] ARM: S3C24XX: Fix compilation errors with 3.6-rc1   Heiko Stübner
• [PATCH 1/2] ARM: S3C24XX: Add missing DMACH_DT_PROP   Heiko Stübner
• [PATCH 2/2] ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters   Heiko Stübner
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Heiko Stübner
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Heiko Stübner
• [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Heiko Stübner
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• Vector Modified   Luffy Sun
• Crashme test cause arm data abort vector modified   Luffy Sun
• [PATCH] ARM: ep93xx: clockevent support   H Hartley Sweeten
• [PATCH 1/6] ARM: move ARCH config definitions into mach dirs   H Hartley Sweeten
• [PATCH 2/6] ARM: introduce Kconfig.mach   H Hartley Sweeten
• [PATCH v4 0/12] KGDB/KDB FIQ (NMI) debugger   Brian Swetland
• [PATCH] ARM: dma-mapping: fix incorrect freeing of atomic allocations   Marek Szyprowski
• [PATCH] ARM: dma-mapping: fix atomic allocation alignment   Marek Szyprowski
• [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available   Marek Szyprowski
• [PATCH v3 1/4] ARM: dma-mapping: define ARCH_HAS_DMA_MMAP_COHERENT   Marek Szyprowski
• [GIT PULL] DMA-mapping fixups for v3.6-rc2   Marek Szyprowski
• [RFC PATCH] ARM: add coherent dma ops   Marek Szyprowski
• [PATCH v3 3/4] media: videobuf2-dma-contig: use dma_mmap_coherent if available   Marek Szyprowski
• Potential Regression in 3.6-rc1 - Kirkwood SATA   Marek Szyprowski
• [PATCH 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Marek Szyprowski
• [PATCH] ARM: relax conditions required for enabling Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 1/2] ARM: da850/omap-l138: Add SoC related definitions for VPIF   Marek Szyprowski
• [PATCH 0/3] Add code for setting coherent pool size   Marek Szyprowski
• [PATCH 1/3] ARM: DMA-Mapping: add function for setting coherent pool size from platform code   Marek Szyprowski
• [PATCH 2/3] ARM: DMA-Mapping: print warning when atomic coherent allocation fails   Marek Szyprowski
• [PATCH 3/3] ARM: Kirkwood: increase atomic coherent pool size   Marek Szyprowski
• [PATCH 0/4] Per device coherent DMA map ops   Marek Szyprowski
• [PATCH 3/3] ARM: Kirkwood: increase atomic coherent pool size   Marek Szyprowski
• [PATCH 2/3] ARM: DMA-Mapping: print warning when atomic coherent allocation fails   Marek Szyprowski
• [PATCH] ARM: relax conditions required for enabling Contiguous Memory Allocator   Marek Szyprowski
• [PATCH] ARM: relax conditions required for enabling Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 0/4] Per device coherent DMA map ops   Marek Szyprowski
• [PATCHv6 2/2] ARM: dma-mapping: remove custom consistent dma region   Marek Szyprowski
• [RFC 0/4] ARM: dma-mapping: IOMMU atomic allocation   Marek Szyprowski
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Marek Szyprowski
• [PATCH v2] ARM: DMA-Mapping: print warning when atomic coherent allocation fails   Marek Szyprowski
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Marek Szyprowski
• [v2 4/4] ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC   Marek Szyprowski
• [RFC 2/4] ARM: dma-mapping: IOMMU allocates pages from pool with GFP_ATOMIC   Marek Szyprowski
• [v3 1/4] ARM: dma-mapping: atomic_pool with struct page **pages   Marek Szyprowski
• [v4 0/4] ARM: dma-mapping: IOMMU atomic allocation   Marek Szyprowski
• [PATCH 3/3] ARM: Kirkwood: increase atomic coherent pool size   Marek Szyprowski
• [PATCH 4/4] ARM: dma-mapping: Skip cache maint for invalid page   Marek Szyprowski
• [PATCH] [media] atmel_isi: allocate memory to store the isi platform data.   Nicolas THERY
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Archit Taneja
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Archit Taneja
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Archit Taneja
• [BUG] leds-pwm: First setting of brightness does nothing   Benoît Thébaudeau
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Benoît Thébaudeau
• [PATCH] pwm: Call pwm_enable() before pwm_config()   Benoît Thébaudeau
• [PATCH] pwm-imx: Fix config / enable / disable   Benoît Thébaudeau
• [PATCH 4/5] DRM: add i.MX IPUv3 base driver   Benoît Thébaudeau
• [PATCH 1/2] mmc: atmel-mci: DMA can be used with other controller   Hein Tibosch
• [PATCH 2/2] mmc: atmel-mci: AP700x PDC is not connected to MCI   Hein Tibosch
• [PATCH 0/2] mmc: atmel-mci: repair driver for use with AVR32 (AP7000)   Hein Tibosch
• [PATCH v2 2/2] mmc: atmel-mci: AP700x PDC is not connected to MCI   Hein Tibosch
• [PATCH v2 1/2] mmc: atmel-mci: DMA can be used with other controller   Hein Tibosch
• [PATCH v2 0/2] mmc: atmel-mci: repair driver for use with AVR32 (AP7000)   Hein Tibosch
• [PATCH v3 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver   Anton Tikhomirov
• [PATCH] ARM: mxs_defconfig: Enable USB host   Tabi Timur-B04825
• [PATCH] ARM: mxs_defconfig: Enable USB host   Tabi Timur-B04825
• [PATCH 01/22] ARM: add mechanism for late code patching   Tixy
• [PATCHv3 4/4] ARM: kprobes: make more tests conditional   Tixy
• [PATCHv4 4/4] ARM: kprobes: make more tests conditional   Tixy
• [PATCH 1/1] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Dmitry Torokhov
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Dmitry Torokhov
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Dmitry Torokhov
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Dmitry Torokhov
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Dmitry Torokhov
• [PATCH] ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path   Steffen Trumtrar
• [PATCH] arm:davinci: clk - migrate to new common clock API   Mike Turquette
• [PATCH] arm:davinci: clk - migrate to new common clock API   Mike Turquette
• [linux-keystone] Re: [PATCH] arm:davinci: clk - migrate to new common clock API   Turquette, Mike
• [PATCH v2 0/4] [RFC] reentrancy in the common clk framework   Mike Turquette
• [PATCH v2 1/4] [RFC] clk: new locking scheme for reentrancy   Mike Turquette
• [PATCH v2 2/4] [RFC] clk: notifier handler for dynamic voltage scaling   Mike Turquette
• [PATCH v2 3/4] [RFC] cpufreq: omap: scale regulator from clk notifier   Mike Turquette
• [PATCH v2 4/4] [RFC] omap3+: clk: dpll: call clk_prepare directly   Mike Turquette
• [PATCH 1/1] clk: add DT support for clock gating control   Mike Turquette
• [PATCH v4 1/2] ARM: PRIMA2: convert to common clk and finish full clk tree   Mike Turquette
• [PATCH] clk: convert ARM RealView to common clk   Mike Turquette
• [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Mike Turquette
• [PATCH 1/5] arm: mmp: make private clock definition exclude from common clock   Mike Turquette
• [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Mike Turquette
• [PATCH v2 1/4] [RFC] clk: new locking scheme for reentrancy   Mike Turquette
• [PATCH v4 1/3] ARM: omap: clk: add clk_prepare and clk_unprepare   Turquette, Mike
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Turquette, Mike
• [PATCH v3] clk: add Loongson1B clock support   Mike Turquette
• [PATCH 1/4] clk: Provide option for clk_get_rate to issue hw for new rate   Mike Turquette
• [PATCH v2] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Peter Ujfalusi
• [PATCH v2 resend] ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus   Peter Ujfalusi
• [PATCH 00/11] ARM/ASoC: OMAP McBSP device tree support   Peter Ujfalusi
• [PATCH 01/11] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH 02/11] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Peter Ujfalusi
• [PATCH 03/11] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [PATCH 04/11] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Peter Ujfalusi
• [PATCH 05/11] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Peter Ujfalusi
• [PATCH 06/11] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode   Peter Ujfalusi
• [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Peter Ujfalusi
• [PATCH 09/11] ASoC: omap-mcbsp: Remove unused defines   Peter Ujfalusi
• [PATCH 10/11] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Peter Ujfalusi
• [PATCH 11/11] ASoC: omap-mcbsp: Add device tree bindings   Peter Ujfalusi
• [PATCH 00/11] MFD/ASoC/Input: twl4030-audio submodule DT support   Peter Ujfalusi
• [PATCH 01/11] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part   Peter Ujfalusi
• [PATCH 02/11] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH 03/11] MFD: twl4030-audio: Rearange and clean-up the probe function   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 05/11] Input: twl4030-vibra: Support for DT booted kernel   Peter Ujfalusi
• [PATCH 06/11] ASoC: twl4030: Move hs_extmute GPIO handling to driver   Peter Ujfalusi
• [PATCH 07/11] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Peter Ujfalusi
• [PATCH 08/11] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data   Peter Ujfalusi
• [PATCH 09/11] ASoC: twl4030: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH 10/11] ASoC: twl4030: Add pointer to pdata within the private data   Peter Ujfalusi
• [PATCH 11/11] ASoC: twl4030: Support for DT booted kernel   Peter Ujfalusi
• [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030   Peter Ujfalusi
• [PATCH 1/4] ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec   Peter Ujfalusi
• [PATCH 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver   Peter Ujfalusi
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH 4/4] ASoC: Remove obsolete OMAP3 machine drivers   Peter Ujfalusi
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   Peter Ujfalusi
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [alsa-devel] [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [alsa-devel] [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [alsa-devel] [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Peter Ujfalusi
• [PATCH v2 0/9] ARM/ASoC: OMAP McBSP device tree support   Peter Ujfalusi
• [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH v2 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [PATCH v2 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Peter Ujfalusi
• [PATCH v2 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Peter Ujfalusi
• [PATCH v2 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH v2 6/9] ASoC: omap-mcbsp: Remove unused defines   Peter Ujfalusi
• [PATCH v2 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Peter Ujfalusi
• [PATCH v2 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Peter Ujfalusi
• [PATCH v2 9/9] ASoC: omap-mcbsp: Add device tree bindings   Peter Ujfalusi
• [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030   Peter Ujfalusi
• [PATCH v2 1/4] ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec   Peter Ujfalusi
• [PATCH v2 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver   Peter Ujfalusi
• [PATCH v2 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH v2 4/4] ASoC: Remove obsolete OMAP3 machine drivers   Peter Ujfalusi
• [PATCH v2 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Peter Ujfalusi
• [PATCH v2 01/14] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part   Peter Ujfalusi
• [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v2 03/14] MFD: twl4030-audio: Rearange and clean-up the probe function   Peter Ujfalusi
• [PATCH v2 04/14] MFD: twl-core: Add API to query the HFCLK rate   Peter Ujfalusi
• [PATCH v2 05/14] MFD: twl4030-audio: Get audio MCLK via twl-core API instead of pdata   Peter Ujfalusi
• [PATCH v2 06/14] dt: Add empty of_find_node_by_name() function   Peter Ujfalusi
• [PATCH v2 07/14] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH v2 08/14] Input: twl4030-vibra: Support for DT booted kernel   Peter Ujfalusi
• [PATCH v2 09/14] ASoC: twl4030: Move hs_extmute GPIO handling to driver   Peter Ujfalusi
• [PATCH v2 10/14] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Peter Ujfalusi
• [PATCH v2 11/14] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data   Peter Ujfalusi
• [PATCH v2 12/14] ASoC: twl4030: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v2 13/14] ASoC: twl4030: Add pointer to pdata within the private data   Peter Ujfalusi
• [PATCH v2 14/14] ASoC: twl4030: Support for DT booted kernel   Peter Ujfalusi
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Peter Ujfalusi
• [PATCH v2 1/3] mfd: twl6040: Fix GPO mask   Peter Ujfalusi
• [PATCH v2 2/3] mfd: twl6040: Add twl6040-gpio child   Peter Ujfalusi
• [PATCH v2 3/3] gpio: Add basic support for TWL6040 GPOs   Peter Ujfalusi
• [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support   Peter Ujfalusi
• [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Peter Ujfalusi
• [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Peter Ujfalusi
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH v3 6/9] ASoC: omap-mcbsp: Remove unused defines   Peter Ujfalusi
• [PATCH v3 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Peter Ujfalusi
• [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Peter Ujfalusi
• [PATCH v3 9/9] ASoC: omap-mcbsp: Add device tree bindings   Peter Ujfalusi
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Ujfalusi, Peter
• [PATCH] ASoC: omap-mcbsp: Device tree binding documentation update   Peter Ujfalusi
• [PATCH] ARM: OMAP2+: twl-common: Fix compile time error when omap-twl4030 audio is not enabled   Peter Ujfalusi
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH 0/6] ARM/dts: omap McBSP and audio support for BeagleBoard   Peter Ujfalusi
• [PATCH 1/6] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [PATCH 2/6] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2   Peter Ujfalusi
• [PATCH 3/6] ARM/dts: OMAP3: Add McBSP entries   Peter Ujfalusi
• [PATCH 4/6] ARM/dts: OMAP4: Add McBSP entries   Peter Ujfalusi
• [PATCH 5/6] ARM/dts: OMAP5: Add McBSP entries   Peter Ujfalusi
• [PATCH 6/6] ARM/dts: omap3-beagle: Enable audio support   Peter Ujfalusi
• [PATCH] ARM: OMAP2+: twl-common: Fix compile time error when omap-twl4030 audio is not enabled   Peter Ujfalusi
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Peter Ujfalusi
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Peter Ujfalusi
• [PATCH v2 0/8] ARM/dts: OMAP audio related updates for OMAP2/3/4/5   Peter Ujfalusi
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [PATCH v2 2/8] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2   Peter Ujfalusi
• [PATCH v2 3/8] ARM/dts: OMAP3: Add McBSP entries   Peter Ujfalusi
• [PATCH v2 4/8] ARM/dts: OMAP4: Add McBSP entries   Peter Ujfalusi
• [PATCH v2 5/8] ARM/dts: OMAP5: Add McBSP entries   Peter Ujfalusi
• [PATCH v2 6/8] ARM/dts: omap3-beagle: Enable audio support   Peter Ujfalusi
• [PATCH v2 7/8] ARM/dts: omap4: Add reg-names for McPDM and DMIC   Peter Ujfalusi
• [PATCH v2 8/8] ARM/dts: omap5: Add McPDM and DMIC section to the dtsi file   Peter Ujfalusi
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Peter Ujfalusi
• [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Greg Ungerer
• [PATCH 1/4] ARM: ks-8695: merge the timer header into the timer driver   Greg Ungerer
• [PATCH 3/4] ARM: ks8695: delete resume hook from timer   Greg Ungerer
• [PATCH v2 04/31] arm64: MMU definitions   Geert Uytterhoeven
• [GIT PULL] Update LZO compression   Geert Uytterhoeven
• [PATCH v2 16/31] arm64: ELF definitions   Geert Uytterhoeven
• TI SoC Linux BoF @ Linux Plumbers Conference: tomorrow   Valentin, Eduardo
• [PATCH 0/3] ARM: OMAP2/3: DSS HWMOD fixes   Tomi Valkeinen
• [PATCH V6 0/6] OMAPDSS: Cleanup cpu_is checks   Tomi Valkeinen
• [PATCH 6/9] ARM: OMAP1: move omap1_bl pdata out of arch/arm/*   Tomi Valkeinen
• [PATCH 7/9] ARM: OMAP1: move lcd pdata out of arch/arm/*   Tomi Valkeinen
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Tomi Valkeinen
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Tomi Valkeinen
• [PATCH v4 2/3] ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage   Tomi Valkeinen
• [PATCH 0/3] ARM: OMAP2/3: DSS HWMOD fixes   Tomi Valkeinen
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 08/10 V2] spi: Add DMA support into SPI driver   Marek Vasut
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• MMAP_MIN_ADDR problem/question   Marek Vasut
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver   Marek Vasut
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 00/10 V3] MXS SPI driver   Marek Vasut
• [PATCH 01/10] mmc: spi: Move SSP register definitions into separate file   Marek Vasut
• [PATCH 02/10] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP   Marek Vasut
• [PATCH 03/10] mmc: spi: Add necessary bits into mxs-spi.h   Marek Vasut
• [PATCH 04/10] mmc: spi: Pull out parts shared between MMC and SPI   Marek Vasut
• [PATCH 05/10] mmc: spi: Pull out the SSP clock configuration function   Marek Vasut
• [PATCH 06/10 V3] spi: Add SPI driver for mx233/mx28   Marek Vasut
• [PATCH 07/10] mmc: spi: Pull out common DMA parts from MXS MMC   Marek Vasut
• [PATCH 08/10 V2] spi: Add DMA support into SPI driver   Marek Vasut
• [PATCH 09/10 V2] spi: Add SSP/SPI device tree documentation   Marek Vasut
• [PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi   Marek Vasut
• [PATCH 0/3] i.MX28 LRADC driver   Marek Vasut
• [PATCH 1/3] IIO: Add 4-byte unsigned reads into generic-buffer example   Marek Vasut
• [PATCH 2/3 V2] IIO: Add basic MXS LRADC driver   Marek Vasut
• [PATCH 3/3] IIO: arm: Add LRADC to i.MX28 dts   Marek Vasut
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Marek Vasut
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Marek Vasut
• [PATCH V2] MXS: Remove MMAP_MIN_ADDR setting from mxs_defconfig   Marek Vasut
• [PATCH] MXS: Fix mxs_defconfig MMAP_MIN_ADDR   Marek Vasut
• [PATCH 2/3 V2] IIO: Add basic MXS LRADC driver   Marek Vasut
• [PATCH] ARM: mxs_defconfig: Enable USB host   Marek Vasut
• [Openpxa-users] pxa3x0 smart panel interface   Marek Vasut
• [PATCH] mtd: gpmi: add NAND write verify support   Marek Vasut
• [PATCH] mtd: gpmi: add NAND write verify support   Marek Vasut
• [PATCH] mtd: gpmi: add NAND write verify support   Marek Vasut
• [PATCH v3] mtd: gpmi: add NAND write verify support   Marek Vasut
• [PATCH v3] mtd: gpmi: add NAND write verify support   Marek Vasut
• [PATCH v4] mtd: gpmi: add NAND write verify support   Marek Vasut
• [PATCH 2/3 V2] IIO: Add basic MXS LRADC driver   Marek Vasut
• [PATCH 0/3] i.MX28 LRADC driver   Marek Vasut
• [PATCH v4] mtd: gpmi: add NAND write verify support   Marek Vasut
• [PATCH 1/2] ARM: mach-imx: Remove board entries in dt_board_compat   Marek Vasut
• [PATCH] spi/mxs: Make the SPI block clock speed configurable via DT   Marek Vasut
• [PATCH] mxs/spi: Fix misuse of init_completion   Marek Vasut
• [PATCH] mxs/spi: Fix misuse of init_completion   Marek Vasut
• [PATCH V2] mxs/spi: Fix misuse of init_completion   Marek Vasut
• [PATCH] mxs/spi: Restart the block after unsuccessful transfer   Marek Vasut
• [PATCH] mxs/spi: Add SPI slave mode operation DT prop   Marek Vasut
• [PATCH V2] mxs/spi: Fix misuse of init_completion   Marek Vasut
• [PATCH V3] mxs/spi: Fix misuse of init_completion   Marek Vasut
• [PATCH 1/2] ARM: mx28: Add SPI pinmux into imx28.dtsi   Marek Vasut
• [PATCH 2/2] ARM: mxs: Update DENX M28 machine and dts file   Marek Vasut
• [PATCH V4] MXS: Implement DMA support into mxs-i2c   Marek Vasut
• SLAVE Side SPI kernel driver development   Marek Vasut
• [PATCH 1/4 V2] ARM: mx28: Add SPI 2 pinmux into imx28.dtsi   Marek Vasut
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Marek Vasut
• [PATCH 3/4 V2] ARM: mxs: Update DENX M28 machine and dts file   Marek Vasut
• [PATCH 4/4] ARM: mxs: Add SchulerControl SPS1 DTS file   Marek Vasut
• SLAVE Side SPI kernel driver development   Marek Vasut
• [PATCH 4/4] ARM: mxs: Add SchulerControl SPS1 DTS file   Marek Vasut
• [PATCH 3/4 V2] ARM: mxs: Update DENX M28 machine and dts file   Marek Vasut
• [PATCH V3] ARM: mxs: Update DENX M28 machine and dts file   Marek Vasut
• [PATCH 1/3] ARM: mx28evk: Add SPI flash support   Marek Vasut
• [PATCH 2/3] ARM: mx28evk: Add LRADC support   Marek Vasut
• [PATCH 4/4] ARM: mxs: Add SchulerControl SPS1 DTS file   Marek Vasut
• [PATCH RESEND 1/2] msm: io: Remove 7x30 iomap region from 7x00   Rohit Vaswani
• [PATCH RESEND 2/2] msm: io: Change the default static iomappings to be shared   Rohit Vaswani
• [PATCH 1/2] ARM: local timers: Unmask interrupt before new TVAL is set   Rohit Vaswani
• [PATCH 2/2] ARM: local timers: add timer support using IO mapped register   Rohit Vaswani
• [PATCH 2/2] ARM: local timers: add timer support using IO mapped register   Rohit Vaswani
• [PATCH 1/2] ARM: local timers: Unmask interrupt before new TVAL is set   Rohit Vaswani
• [PATCH 2/2] ARM: local timers: add timer support using IO mapped register   Rohit Vaswani
• [PATCH 2/2] ARM: local timers: add timer support using IO mapped register   Rohit Vaswani
• [PATCH 0/2] dts for i2c-omap: fix incorrect adapter id   Florian Vaussard
• [PATCH 1/2] i2c-omap: Fix incorrect adapter id when booting from a device tree   Florian Vaussard
• [PATCH 2/2] arm/dts: Add i2c aliases for OMAP3 and OMAP4/AM33xx   Florian Vaussard
• [PATCH 1/2] i2c-omap: Fix incorrect adapter id when booting from a device tree   Florian Vaussard
• [PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion   Florian Vaussard
• [PATCH 1/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion board   Florian Vaussard
• [PATCH 2/2] ARM: omap/dts: update the documentation   Florian Vaussard
• [PATCH] ARM: EXYNOS: Add clocks for EXYNOS Audio Subsystem.   Padma Venkat
• [alsa-devel] [PATCH 1/2] ASOC: SAMSUNG: Add DT support for i2s   Padma Venkat
• [PATCH] ARM: EXYNOS: Add static mapping for EXYNOS Audio Subsystem   Padma Venkat
• [PATCH] ARM: EXYNOS: Add I2S SFR base addresses   Padma Venkat
• [PATCH] ASoC: Samsung: Update Kconfig for Exynos5250 and Exynos4412   Padma Venkat
• For physical memory management, why take holes page as free pages?   Rabin Vincent
• Kernel relocate on beaglebone   Sandro Viti
• [alsa-devel] [PATCH V2 1/6] ASoC: davinci: davinci-pcm does not need to be a plaform_driver   Sergey Vlasov
• [PATCH 07/11] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 11/11] ARM: Get rid of .LCcralign local label usage in alignment_trap macro   Anton Vorontsov
• [PATCH 03/11] kdb: Implement disable_nmi command   Anton Vorontsov
• [PATCH 0/9] Get rid of FIQ_START/enable/disable_fiq() + some FIQ cleanups   Anton Vorontsov
• [PATCH 1/9] ARM: mach-rpc: Don't register FIQs with genirq   Anton Vorontsov
• [PATCH 2/9] ARM: plat-s3c24xx: Don't use FIQ_START   Anton Vorontsov
• [PATCH 3/9] [media] mx1_camera: Don't use {en,dis}able_fiq() calls   Anton Vorontsov
• [PATCH 4/9] ASoC: imx: Don't use {en,dis}able_fiq() calls   Anton Vorontsov
• [PATCH 5/9] ARM: FIQ: Remove enable_fiq() and disable_fiq() calls   Anton Vorontsov
• [PATCH 6/9] ARM: FIQ: Remove FIQ_START   Anton Vorontsov
• [PATCH 7/9] ARM: FIQ: Should include asm/mach/irq.h   Anton Vorontsov
• [PATCH 8/9] ARM: FIQ: Implement !CONFIG_FIQ stubs   Anton Vorontsov
• [PATCH 9/9] ARM: FIQ: Make show_fiq_list() return void   Anton Vorontsov
• [PATCH 2/9] ARM: plat-s3c24xx: Don't use FIQ_START   Anton Vorontsov
• [PATCH v4 0/12] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [PATCH 01/12] kernel/debug: Mask KGDB NMI upon entry   Anton Vorontsov
• [PATCH 02/12] kdb: Implement disable_nmi command   Anton Vorontsov
• [PATCH 03/12] kdb: Turn KGDB_KDB=n stubs into static inlines   Anton Vorontsov
• [PATCH 04/12] tty/serial/core: Introduce poll_init callback   Anton Vorontsov
• [PATCH 05/12] tty/serial/amba-pl011: Implement poll_init callback   Anton Vorontsov
• [PATCH 06/12] tty/serial/kgdboc: Add and wire up clear_irqs callback   Anton Vorontsov
• [PATCH 07/12] tty/serial/amba-pl011: Implement clear_irqs callback   Anton Vorontsov
• [PATCH 08/12] tty/serial: Add kgdb_nmi driver   Anton Vorontsov
• [PATCH 09/12] ARM: Move some macros from entry-armv to entry-header   Anton Vorontsov
• [PATCH 10/12] ARM: Add KGDB/KDB FIQ debugger generic code   Anton Vorontsov
• [PATCH 11/12] ARM: VIC: Add a couple of low-level FIQ management helpers   Anton Vorontsov
• [PATCH 12/12] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH v4 0/12] KGDB/KDB FIQ (NMI) debugger   Anton Vorontsov
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Anton Vorontsov
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Anton Vorontsov
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   Anton Vorontsov
• [PATCH 0/9] Get rid of FIQ_START/enable/disable_fiq() + some FIQ cleanups   Anton Vorontsov
• [PATCH 1/5] i2c: at91: add new fixes for some TWI ip versions   Voss, Nikolaus
• [PATCH v11 4/4] G45 TWI: remove open drain setting for twi function gpios   Voss, Nikolaus
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [Xen-devel] [PATCH v2 07/23] xen/arm: Xen detection and shared_info page mapping   David Vrabel
• [PATCH 2/2] GPIO: gpio-pxa: fix devicetree functions   Linus Walleij
• [PATCH 1/2] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Linus Walleij
• [PATCH v3 5/9] GPIO: gpio-pxa: fix devicetree functions   Linus Walleij
• Sharing resources between several drivers.   Linus Walleij
• [GIT PULL][for 3.7] pull request from dt-mmp branch in pxa git tree   Linus Walleij
• [PATCH 1/6] pinctrl: append new pins and groups in pxa910   Linus Walleij
• [PATCH 2/6] pinctrl: add pinconf support in pxa3xx   Linus Walleij
• [PATCH 3/6] pinctrl: support dt in pxa series   Linus Walleij
• [PATCH 4/6] pinctrl: append new groups of mmp2   Linus Walleij
• [PATCH 5/6] ARM: mmp: select pinctrl for boards with DT   Linus Walleij
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Linus Walleij
• [PATCH v3 4/9] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Linus Walleij
• [RFC v2] ARM: sched_clock: update epoch_cyc on resume   Linus Walleij
• [PATCH v3 4/9] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Linus Walleij
• [PATCH 2/2] GPIO: gpio-pxa: fix devicetree functions   Linus Walleij
• [PATCH 1/4] gpio/mxc: remove redundant shadow variables initialization   Linus Walleij
• [PATCH 2/4] gpio/mxc: specify gpio base for device tree probe   Linus Walleij
• [PATCH 3/4] gpio/mxs: specify gpio base for device tree probe   Linus Walleij
• [PATCH 4/4] ARM: dts: imx: add alias for gpio   Linus Walleij
• [RFC PATCH] gpio: Add a generic GPIO handling driver   Linus Walleij
• [PATCH V2 5/6] x86: add CONFIG_ARM_AMBA, selected by STA2X11   Linus Walleij
• [PATCH] ARM: integrator: use clk_prepare_enable() for timer   Linus Walleij
• [PATCH] ARM: integrator: use clk_prepare_enable() for timer   Linus Walleij
• [PATCH] MAINTAINERS: update my entries   Linus Walleij
• [PATCH] ARM: ux500: resurrect I2C platform data   Linus Walleij
• [PATCH 6/6] Input: ab8500-ponkey: Make the distinction between DT and non-DT boots   Linus Walleij
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver   Linus Walleij
• [PATCH] ARM: ux500: resurrect I2C platform data   Linus Walleij
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.   Linus Walleij
• [PATCH] ARM: integrator: use clk_prepare_enable() for timer   Linus Walleij
• [PATCH] clk: convert ARM RealView to common clk   Linus Walleij
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Linus Walleij
• [PATCH 3/4] gpio/mxs: specify gpio base for device tree probe   Linus Walleij
• [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.   Linus Walleij
• [PATCH] pinctrl/nomadik: fix hsi function group list   Linus Walleij
• [PATCH] pinctrl/nomadik: add ASIC DB8450 pinctrl driver   Linus Walleij
• [PATCH] pinctrl-sirf: remove devm_kfree at error path   Linus Walleij
• [PATCH 1/2] pinctrl: use ERR_CAST instead of ERR_PTR(PTR_ERR(...))   Linus Walleij
• [PATCH 2/2] MAINTAINERS: fix a few pinctrl related entries   Linus Walleij
• [PATCH] pinctrl/nomadik: add ASIC DB8450 pinctrl driver   Linus Walleij
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [PATCH] clk: convert ARM RealView to common clk   Linus Walleij
• [PATCH v2] pinctrl/nomadik: add ASIC DB8450 pinctrl driver   Linus Walleij
• [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.   Linus Walleij
• [PATCH 5/6] ARM: integrator: include <linux/export.h   Linus Walleij
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [PATCH 1/2] pinctrl/nomadik: add STn8815 ASIC support   Linus Walleij
• [PATCH 2/2] ARM: nomadik: configure Nomadik for pin control   Linus Walleij
• [PATCH 1/4] ARM: ux500: delete remnant U5500 macros   Linus Walleij
• [PATCH 2/4] ARM: ux500: add a U8520 detection macro   Linus Walleij
• [PATCH 3/4] ARM: ux500: reform Ux500 family names   Linus Walleij
• [PATCH 4/4] ARM: ux500: add detection for DB8500 ASIC v2.2   Linus Walleij
• [PATCH 00/22] mop500 related Audio reorganisation and fixups   Linus Walleij
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Linus Walleij
• [PATCH 06/11] gpio: em: do not discard em_gio_irq_domain_cleanup   Linus Walleij
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Linus Walleij
• [PATCH 1/6] ASoC: dapm: If one widget fails, do not force all subsequent widgets to fail too   Linus Walleij
• [GIT PULL] Ux500 ASIC ID patches   Linus Walleij
• [PATCH 0/7] U300 cleanup patch series   Linus Walleij
• [PATCH 1/7] ARM: u300: retire ancient platforms   Linus Walleij
• [PATCH 2/7] pinctrl/coh901: retire ancient GPIO block versions   Linus Walleij
• [PATCH 3/7] pinctrl/coh901: move header to platform data dir   Linus Walleij
• [PATCH 4/7] ARM: u300: merge u300.c into core.c and rid headers   Linus Walleij
• [PATCH 5/7] ARM: u300: delete remnant clkdev.h file   Linus Walleij
• [PATCH 6/7] ARM: u300: move DMA channel header into mach-u300   Linus Walleij
• [PATCH 7/7] ARM: u300: convert to sparse IRQs   Linus Walleij
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Linus Walleij
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Linus Walleij
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Linus Walleij
• [PATCH] pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI   Linus Walleij
• [PATCH] pinctrl: imx5: start numbering pad from 0   Linus Walleij
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Linus Walleij
• [PATCH 2/8] irqdomain: Take interrupt-parent property into account if specified   Linus Walleij
• [PATCH 3/8] ARM: ux500: Identify the PRCMU as an interrupt controller   Linus Walleij
• [PATCH 4/8] ARM: ux500: Force AB8500 to use the GIC as its interrupt controller   Linus Walleij
• [PATCH 6/8] mfd: Use interrupt-parent as IRQ controller if specified in DT   Linus Walleij
• [PATCH 7/8] mfd: Use the AB8500's IRQ domain to convert hwirq to virq   Linus Walleij
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Linus Walleij
• [PATCH 8/8] input: ab8500-ponkey: Rely on MFD core to convert IRQs to virtual   Linus Walleij
• [rtc-linux] [PATCH 1/1] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Linus Walleij
• [PATCH 1/1] ARM: ux500: Match Power-On-Key MFD and DTS compatible strings   Linus Walleij
• [PATCH 1/1] ARM: ux500: Remove unused snowball_of_platform_devs struct   Linus Walleij
• [PATCH 01/22] ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'   Linus Walleij
• [PATCH 02/22] ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled   Linus Walleij
• [PATCH 03/22] ASoC: ab8500: Inform SoC Core that we have our own I/O arrangements   Linus Walleij
• [PATCH 04/22] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Linus Walleij
• [PATCH 05/22] ASoC: Ux500: Enable MOP500 driver for Device Tree   Linus Walleij
• [PATCH 06/22] ASoC: Ux500: Enable ux500 MSP driver for Device Tree   Linus Walleij
• [PATCH] pinctrl/nomadik: add kp_b_2 keyboard function group list   Linus Walleij
• [PATCH] pinctrl: imx5: start numbering pad from 0   Linus Walleij
• [PATCH] pinctrl: imx5: start numbering pad from 0   Linus Walleij
• [PATCH 5/8] mfd: Provide the PRCMU with its own IRQ domain   Linus Walleij
• RFC: changing DMA slave configuration API   Linus Walleij
• [PATCH v3 2/2] DMAEngine: Add DMAEngine driver based on old MSM DMA APIs   Linus Walleij
• [PATCH 07/22] ASoC: Ux500: Initialise PCM from MSP probe rather than as a device   Linus Walleij
• [PATCH 08/22] ASoC: codecs: Enable AB8500 CODEC for Device Tree   Linus Walleij
• [PATCH 11/22] ARM: ux500: Clean-up MSP platform code   Linus Walleij
• [PATCH 13/22] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Linus Walleij
• [PATCH 14/22] ARM: ux500: Pass MSP DMA platform data though AUXDATA   Linus Walleij
• [PATCH 15/22] ARM: ux500: Stop registering the MOP500 Audio driver from platform code   Linus Walleij
• [PATCH 16/22] ARM: ux500: Stop registering the PCM driver from platform code   Linus Walleij
• [PATCH 17/22] ARM: ux500: Remove platform registration of MSP devices   Linus Walleij
• [PATCH 18/22] ARM: ux500: Rename MSP board file to something more meaningful   Linus Walleij
• [PATCH 19/22] ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the u9500, u8540 and u9540   Linus Walleij
• [PATCH 20/22] ARM: ux500: Add nodes for the MSP into Device Tree   Linus Walleij
• [PATCH 21/22] ARM: ux500: Add all encompassing sound node to the Snowball Device Tree   Linus Walleij
• [PATCH 22/22] Documentation: Add the AB8500 CODEC device to the MFD AB8500 doc   Linus Walleij
• [PATCH 00/22] mop500 related Audio reorganisation and fixups   Linus Walleij
• [GIT PULL] U300 cleanups and sparseirq   Linus Walleij
• [PATCH 01/14] ARM: at91: gpio: implement request and free   Linus Walleij
• [PATCH 02/14] at91: regroup gpio and pinctrl under a simple-bus   Linus Walleij
• [PATCH 03/14] arm: at91: at91sam9x5: fix gpio number per bank   Linus Walleij
• [PATCH 04/14] ARM: at91: add dummies pinctrl for non dt platform   Linus Walleij
• [PATCH 06/14] arm: at91: dt: at91sam9 add pinctrl support   Linus Walleij
• [PATCH 07/14] arm: at91: dt: at91sam9 add serial pinctrl support   Linus Walleij
• [PATCH 08/14] tty: atmel_serial: add pinctrl support   Linus Walleij
• [PATCH 09/14] arm: at91: dt: sam9m10g45ek: use rts/cts pinctrl group for uart1   Linus Walleij
• [PATCH 10/14] arm: at91: dt: sam9263ek: use rts/cts pinctrl group for uart0   Linus Walleij
• [PATCH 11/14] arm: at91: dt: sam9g20ek: use rts/cts/dtr/dsr/dcd/ri pinctrl group for uart0   Linus Walleij
• [PATCH 12/14] MTD: atmel nand: fix gpio missing request   Linus Walleij
• [PATCH 13/14] arm: at91: dt: at91sam9 add nand pinctrl support   Linus Walleij
• [PATCH 14/14] MTD: atmel_nand: add pinctrl consumer support   Linus Walleij
• [PATCH 05/14] ARM: at91: add pinctrl support   Linus Walleij
• [GIT PULL] Ux500 ASIC ID patches   Linus Walleij
• [PATCH 0/6] Integrator devicetree support   Linus Walleij
• [PATCH 1/6] ARM: integrator: call common init function from machine   Linus Walleij
• [PATCH 2/6] ARM: integrator: check PL010 device name rather than base address   Linus Walleij
• [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller   Linus Walleij
• [PATCH 4/6] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH 6/6] ARM: integrator: convert platform devices to Device Tree   Linus Walleij
• [PATCH v2 28/31] arm64: Generic timers support   Linus Walleij
• [PATCH] clk: convert ARM RealView to common clk   Linus Walleij
• [PATCH 1/1 v4] i2c: Add default configuration into the Nomadik I2C driver.   Linus Walleij
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH 0/6] Integrator devicetree support   Linus Walleij
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Linus Walleij
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver   Linus Walleij
• [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver   Linus Walleij
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Linus Walleij
• [PATCH 05/11] pinctrl: mvebu: add pinctrl driver for Armada XP   Linus Walleij
• [PATCH 06/11] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Linus Walleij
• [PATCH 07/11] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Linus Walleij
• [PATCH 08/11] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Linus Walleij
• [PATCH 09/11] ARM: mvebu: adjust Armada XP evaluation board DTS   Linus Walleij
• [PATCH 10/11] arm: mvebu: enable PINCTRL usage   Linus Walleij
• [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig   Linus Walleij
• [PATCH 2/5] Documentation: add description of DT binding for the gpio-mvebu driver   Linus Walleij
• [PATCH 12/22] ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree   Linus Walleij
• [GIT PULL] ux500 fixes   Linus Walleij
• [PATCH v2 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Linus Walleij
• [PATCH v2 2/4] pinctrl: add exynos4210 specific extensions for samsung pinctrl driver   Linus Walleij
• [PATCH v2 4/4] ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used   Linus Walleij
• [PATCH v2 3/4] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Linus Walleij
• [PATCH 2/2] ARM: EXYNOS: Enable PINCTRL config option for Exynos4 device tree enabled platform   Linus Walleij
• [PATCH] pinctrl: imx5: start numbering pad from 0   Linus Walleij
• [PATCH] pinctrl: imx5: start numbering pad from 0   Linus Walleij
• [PATCH 1/2] ARM: dts: Add pinctrl node entries for Samsung Exynos4210 SoC   Linus Walleij
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Linus Walleij
• [PATCH v2] serial: pl011: honour serial aliases in device tree   Linus Walleij
• [PATCH 0/7] Ux500 and MASK_ON_SUSPEND   Linus Walleij
• [PATCH 1/7] ux500: GIC: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 2/7] mfd/ab8500: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 3/7] gpio/ab8500: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 4/7] mfd/db8500-prcmu: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 5/7] pinctrl/nomdik: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 6/7] mfd/stmpe: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 7/7] mfd/tc3589x: MASK_ON_SUSPEND   Linus Walleij
• [PATCH] ARM: ux500: implement set_wake() callback for the GIC   Linus Walleij
• [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [PATCH] mfd: ab8500: Make ab8500_irq_get_virq() static   Linus Walleij
• [PATCH 0/7] Ux500 and MASK_ON_SUSPEND   Linus Walleij
• [PATCH 2/7] mfd/ab8500: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 3/7] gpio/ab8500: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 4/7] mfd/db8500-prcmu: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 6/7] mfd/stmpe: MASK_ON_SUSPEND   Linus Walleij
• [PATCH 7/7] mfd/tc3589x: MASK_ON_SUSPEND   Linus Walleij
• [PATCH] clk: convert ARM RealView to common clk   Linus Walleij
• [rtc-linux] [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [rtc-linux] RE: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Linus Walleij
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Linus Walleij
• [PATCH] GPIO: Add support for GPIO on CLPS711X-target platform   Linus Walleij
• [PATCH] ARM: ux500: set proper GIC flags   Linus Walleij
• [PATCH] ARM: ux500: set proper GIC flags   Linus Walleij
• [PATCH 13/22] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Linus Walleij
• [PATCH 04/22] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Linus Walleij
• [PATCH v2 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Linus Walleij
• [PATCH 1/6] ARM: ux500: don't select LEDS_GPIO for snowball   Linus Walleij
• [PATCH 3/3] i2c: nomadik: Add Device Tree support to the Nomadik I2C driver   Linus Walleij
• [PATCH 05/14] ARM: at91: add pinctrl support   Linus Walleij
• [PATCH V2 0/4] clk: Convert ARM ux500 to common clock   Linus Walleij
• [PATCH 0/3] Removal of obsolete s3c2410_* GPIO API   Linus Walleij
• [PATCH 0/3] Removal of obsolete s3c2410_* GPIO API   Linus Walleij
• [PATCH 13/13] drivers/rtc/rtc-coh901331.c: use clk_prepare_enable and clk_disable_unprepare   Linus Walleij
• [PATCH 1/4] ARM: ks-8695: merge the timer header into the timer driver   Linus Walleij
• [PATCH 2/4] ARM: ks8695: use [readl|writel]_relaxed()   Linus Walleij
• [PATCH 3/4] ARM: ks8695: delete resume hook from timer   Linus Walleij
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH] ARM: clps711x: convert to clocksource/clockevents   Linus Walleij
• [PATCH] ARM: clps711x: convert to clocksource/clockevents   Linus Walleij
• [PATCH] ARM: gemini: fix the gemini build   Linus Walleij
• [PATCH] clk: convert ARM RealView to common clk   Linus Walleij
• [PATCH] clk: versatile: make config option boolean   Linus Walleij
• [PATCH 02/10] gpio: pxa: add explicit includes for cpu_is_X macros   Linus Walleij
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH 01/17] ASoC: Ux500: Move MSP pinctrl setup into the MSP driver   Linus Walleij
• [PATCH 09/17] ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree   Linus Walleij
• [PATCH 13/22] ARM: ux500: Fork MSP platform registration for step-by-step DT enablement   Linus Walleij
• [PATCH 1/6] gpio/mxs: adopt irq_domain support for mxs gpio driver   Linus Walleij
• [PATCH] GPIO: Add support for GPIO on CLPS711X-target platform   Linus Walleij
• [PATCH 0/3] ARM: EXYNOS: Add support for GPIO on Exynos4x12   Linus Walleij
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Linus Walleij
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Linus Walleij
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Linus Walleij
• [PATCH 5/9] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end   Linus Walleij
• [PATCH 6/9] ARM: OMAP: Move gpio.h to include/linux/platform_data   Linus Walleij
• [rtc-linux] [PATCH 1/1] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Linus Walleij
• [rtc-linux] [PATCH 1/1] drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement   Linus Walleij
• [PATCH 0/4] clk: Support for smp_twd clock for ux500   Linus Walleij
• [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH v2] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH v2] ARM: ks8695: convert to generic time and clocksource   Linus Walleij
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Linus Walleij
• [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller   Linus Walleij
• [PATCH 1/6 v2] ARM: integrator: call common init function from machine   Linus Walleij
• [PATCH 2/6 v2] ARM: integrator: check PL010 device name rather than base address   Linus Walleij
• [PATCH 3/6 v2] ARM: plat-versatile: add DT support to FPGA IRQ controller   Linus Walleij
• [PATCH 4/6 v2] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 5/6 v2] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH 6/6 v2] ARM: integrator: convert platform devices to Device Tree   Linus Walleij
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Paul Walmsley
• [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use   Paul Walmsley
• [PATCH 3/3] ARM: OMAP: omap_device: expose hwmod assert/deassert to omap devices   Paul Walmsley
• [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence   Paul Walmsley
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Paul Walmsley
• DSS and USBHOST powerdomains not entering low-power states on 37xx EVM   Paul Walmsley
• nfsroot problems with v3.6-rc1 on 37xx EVM and dynamic off-mode   Paul Walmsley
• DSS and USBHOST powerdomains not entering low-power states on 37xx EVM   Paul Walmsley
• [PATCH 0/2] ARM: OMAP: smatch warning cleanup and string unwrapping   Paul Walmsley
• [PATCH 1/2] ARM: OMAP: clean up some smatch warnings, fix some printk(KERN_ERR ...   Paul Walmsley
• [PATCH 2/2] ARM: OMAP: unwrap strings   Paul Walmsley
• [PATCH 1/2] ARM: OMAP: clean up some smatch warnings, fix some printk(KERN_ERR ...   Paul Walmsley
• [PATCH 1/3] ARM: OMAP: omap_device: keep track of driver bound status   Paul Walmsley
• [PATCH 1/1] ARM: OMAP2+: hwmod: Print an error message if no match exists for a hwmod class   Paul Walmsley
• [PATCH 1/1] ARM: OMAP2+: hwmod: Print an error message if no match exists for a hwmod class   Paul Walmsley
• [PATCH 1/1] ARM: OMAP2+: hwmod: Print an error message if no match exists for a hwmod class   Paul Walmsley
• [PATCH v2 0/3] ARM: OMAP: omap_device: track driver bound status   Paul Walmsley
• [PATCH v2 3/3] ARM: OMAP: omap_device: idle devices with no driver bound   Paul Walmsley
• [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC   Paul Walmsley
• [PATCH v5 0/8] ARM: OMAP2+: PM: introduce the power domains functional states   Paul Walmsley
• [PATCH] MMC: OMAP MSDI: fix broken PIO mode   Paul Walmsley
• [PATCH] ARM: omap_hwmod: Fix up resource names when booted with devicetree   Paul Walmsley
• [PATCH] ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention   Paul Walmsley
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Paul Walmsley
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Paul Walmsley
• [PATCH 0/5] hwrng/ARM: OMAP: convert to use runtime PM   Paul Walmsley
• [PATCH 1/5] ARM: OMAP2/3: hwmod: add RNG integration data   Paul Walmsley
• [PATCH 2/5] hwrng: OMAP: store per-device data in per-device variables, not file statics   Paul Walmsley
• [PATCH 3/5] hwrng: OMAP: convert to use runtime PM   Paul Walmsley
• [PATCH 4/5] ARM: OMAP: split OMAP1, OMAP2+ RNG device registration   Paul Walmsley
• [PATCH 5/5] hwrng: OMAP: remove SoC restrictions from driver registration   Paul Walmsley
• TI SoC Linux BoF @ Linux Plumbers Conference: tomorrow   Paul Walmsley
• TI SoC Linux BoF @ Linux Plumbers Conference: tomorrow   Paul Walmsley
• [PATCH v4 0/3] Prepare for OMAP2+ movement to Common Clk   Paul Walmsley
• [PATCH 0/5] hwrng/ARM: OMAP: convert to use runtime PM   Paul Walmsley
• imx6q restart is broken   Hui Wang
• [PATCH 0/9] ARM perf updates for 3.7   Hui Wang
• [PATCH 0/9] ARM perf updates for 3.7   Hui Wang
• How to define gpio irq with device tree   Hui Wang
• How to define gpio irq with device tree   Hui Wang
• [PATCH v3 0/3] Input: egalax_ts: parse devicetree to get gpio   Hui Wang
• [PATCH v3 1/3] Input: egalax_ts: get gpio from devicetree node   Hui Wang
• [PATCH v3 2/3] Input: add devicetree binding note for egalax_ts   Hui Wang
• [PATCH v3 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Hui Wang
• [PATCH v3 2/3] Input: add devicetree binding note for egalax_ts   Hui Wang
• [PATCH v3 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Hui Wang
• [PATCH v4 0/3] Input: egalax_ts: parse devicetree to get gpio   Hui Wang
• [PATCH v4 1/3] Input: egalax_ts: get gpio from devicetree node   Hui Wang
• [PATCH v4 2/3] Input: add devicetree binding note for egalax_ts   Hui Wang
• [PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Hui Wang
• [PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Hui Wang
• imx6q restart is broken   Hui Wang
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Hui Wang
• [PATCH] ARM: fix cpu_relax() in case of doing dmb   Hui Wang
• [PATCH v3 09/10] of: Add of_pci_parse_ranges()   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v3 12/32] PCI/ARM: use PCIe capabilities access functions to simplify implementation   Stephen Warren
• [PATCH] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH] ARM: tegra: turn on UART A clock at boot   Stephen Warren
• [PATCH] ARM: tegra: fix U16 divider range check   Stephen Warren
• [PATCH v3 12/32] PCI/ARM: use PCIe capabilities access functions to simplify implementation   Stephen Warren
• [PATCH V3] ARM: dt: tegra: seaboard: add regulators   Stephen Warren
• [PATCH V3] ARM: dt: tegra: ventana: add regulators   Stephen Warren
• [PATCH] ARM: dt: tegra: whistler: add regulators   Stephen Warren
• [PATCH] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH] pinctrl: pinctrl-imx: add imx35 pinctrl driver   Stephen Warren
• [PATCH] ARM: tegra: more regulator fixes for Harmony   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v4 0/6] Port Tegra to generic clk framework   Stephen Warren
• [PATCH 1/3] ARM: tegra: remove board (but not DT) support for TrimSlice   Stephen Warren
• [PATCH 2/3] ARM: tegra: remove board (but not DT) support for Paz00   Stephen Warren
• [PATCH 3/3] ARM: tegra: remove board (but not DT) support for Harmony   Stephen Warren
• [PATCH] pinctrl/nomadik: add ASIC DB8450 pinctrl driver   Stephen Warren
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Stephen Warren
• Kernels on Bad Firmware (was Re: kernel entry for thumb2-only cpus)   Stephen Warren
• [PATCH v2] pinctrl/nomadik: add ASIC DB8450 pinctrl driver   Stephen Warren
• [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Stephen Warren
• [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Stephen Warren
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Stephen Warren
• [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Stephen Warren
• [PATCH] ARM: tegra: more regulator fixes for Harmony   Stephen Warren
• [PATCH V3] ARM: dt: tegra: ventana: add regulators   Stephen Warren
• [PATCH V3] ARM: dt: tegra: ventana: add regulators   Stephen Warren
• [PATCH] ARM: tegra: use IO_ADDRESS for getting virtual address   Stephen Warren
• [PATCH] ARM: dt: tegra: paz00: add regulators   Stephen Warren
• [PATCH V3] ARM: dt: tegra: seaboard: add regulators   Stephen Warren
• [PATCH V3] ARM: dt: tegra: ventana: add regulators   Stephen Warren
• [PATCH 1/2] pinctrl/nomadik: add STn8815 ASIC support   Stephen Warren
• [PATCH 2/2] ARM: nomadik: configure Nomadik for pin control   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH 0/5] ARM: tegra: add CPU hotplug support   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH] pinctrl: imx5: start numbering pad from 0   Stephen Warren
• [PATCH V2 0/6] ARM: tegra: add CPU hotplug support   Stephen Warren
• [PATCH] ARM: dt: tegra: whistler: add regulators   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Stephen Warren
• [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v3 05/10] resource: add PCI configuration space support   Stephen Warren
• [PATCH V3 0/6] ARM: tegra: add CPU hotplug support   Stephen Warren
• [PATCH] pinctrl: imx5: start numbering pad from 0   Stephen Warren
• [PATCH] mmc: tegra: convert to device tree support only   Stephen Warren
• [PATCH] ARM: tegra: clocks: separate tegra_clk_32k_ops from Tegra20 and Tegra30   Stephen Warren
• [PATCH] ARM: tegra30: clocks: fix the wrong tegra_audio_sync_clk_ops name   Stephen Warren
• [PATCH] ARM: tegra: remove duplicate select USE_OF   Stephen Warren
• [PATCH] ARM: tegra: remove duplicate select USE_OF   Stephen Warren
• [PATCH 3/3] ARM: tegra: remove board (but not DT) support for Harmony   Stephen Warren
• [PATCH v3 1/4] arm/dts: regulator: Add tps65910 device tree data   Stephen Warren
• [PATCH v3 1/4] arm/dts: regulator: Add tps65910 device tree data   Stephen Warren
• [PATCH v2 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Stephen Warren
• [PATCH 05/14] ARM: at91: add pinctrl support   Stephen Warren
• [PATCH 0/4] [RFC] ARM: multiplatform: rename all mach headers   Stephen Warren
• Can one set GPIO direction in pinmux definition?   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH v2 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Stephen Warren
• [PATCH v2 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Stephen Warren
• [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Stephen Warren
• Can one set GPIO direction in pinmux definition?   Stephen Warren
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Stephen Warren
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Stephen Warren
• [PATCH 05/14] ARM: at91: add pinctrl support   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• Shutdown problem in SMP system happened on Tegra20   Stephen Warren
• [RFC PATCH] ARM: initial multiplatform support   Stephen Warren
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver   Stephen Warren
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Stephen Warren
• [PATCH] ARM: tegra: remove tegra_timer from tegra_list_clks   Stephen Warren
• [PATCH 1/2] ARM: tegra: remove dead code   Stephen Warren
• [PATCH 2/2] ARM: dt: tegra: harmony: add regulators   Stephen Warren
• [PATCH] usb: tegra: moving phy driver into drivers directory   Stephen Warren
• [PATCH 2/3] ARM: PRIMA2: make mach-prima2 common for all SiRF series SoC   Stephen Warren
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Stephen Warren
• [PATCH v3 1/7] mfd: add syscon driver based on regmap   Stephen Warren
• [PATCH 2/6] brcmfmac: Handling the interrupt in ISR directly for non-OOB   Stephen Warren
• [PATCH 2/2] ARM: dt: tegra: harmony: add regulators   Stephen Warren
• [PATCH] usb: tegra: moving phy driver into drivers directory   Stephen Warren
• [PATCH] ARM: tegra_defconfig: enable APB DMA support   Stephen Warren
• [PATCH] clk: Make the generic clock API available by default   Stephen Warren
• [PATCH] clk: Make the generic clock API available by default   Stephen Warren
• [06/10,V2] spi: Add SPI driver for mx233/mx28   Lothar Waßmann
• [rtc-linux] [PATCH v3] rtc: snvs: add Freescale rtc-snvs driver   Lothar Waßmann
• [rtc-linux] [PATCH v3] rtc: snvs: add Freescale rtc-snvs driver   Lothar Waßmann
• [PATCH] rtc: snvs: improve timeout handling in snvs_rtc_enable()   Lothar Waßmann
• [PATCH] rtc: snvs: improve timeout handling in snvs_rtc_enable()   Lothar Waßmann
• restart callback not supposed to sleep?   Lothar Waßmann
• [Xen-devel] [PATCH 01/24] arm: initial Xen support   Konrad Rzeszutek Wilk
• [PATCH 05/24] xen/arm: empty implementation of grant_table arch specific functions   Konrad Rzeszutek Wilk
• [PATCH 07/24] xen/arm: Xen detection and shared_info page mapping   Konrad Rzeszutek Wilk
• [PATCH 08/24] xen/arm: Introduce xen_pfn_t for pfn and mfn types   Konrad Rzeszutek Wilk
• [PATCH 09/24] xen/arm: compile and run xenbus   Konrad Rzeszutek Wilk
• [Xen-devel] [PATCH 11/24] xen/arm: introduce CONFIG_XEN on ARM   Konrad Rzeszutek Wilk
• [Xen-devel] [PATCH 04/24] xen/arm: sync_bitops   Konrad Rzeszutek Wilk
• [PATCH 12/24] xen/arm: Introduce xen_guest_init   Konrad Rzeszutek Wilk
• [PATCH 13/24] xen/arm: get privilege status   Konrad Rzeszutek Wilk
• [PATCH 14/24] xen/arm: initialize grant_table on ARM   Konrad Rzeszutek Wilk
• [PATCH 15/24] xen/arm: receive Xen events on ARM   Konrad Rzeszutek Wilk
• [Xen-devel] [PATCH 17/24] xen: allow privcmd for HVM guests   Konrad Rzeszutek Wilk
• [PATCH 18/24] xen/arm: compile blkfront and blkback   Konrad Rzeszutek Wilk
• [PATCH 20/24] xen: update xen_add_to_physmap interface   Konrad Rzeszutek Wilk
• [PATCH 21/24] arm/v2m: initialize arch_timers even if v2m_timer is not present   Konrad Rzeszutek Wilk
• [PATCH 23/24] hvc_xen: allow dom0_write_console for HVM guests   Konrad Rzeszutek Wilk
• [PATCH 24/24] [HACK] xen/arm: implement xen_remap_domain_mfn_range   Konrad Rzeszutek Wilk
• [Xen-devel] [PATCH 01/24] arm: initial Xen support   Konrad Rzeszutek Wilk
• [PATCH v2 01/23] arm: initial Xen support   Konrad Rzeszutek Wilk
• [PATCH v2 03/23] xen/arm: page.h definitions   Konrad Rzeszutek Wilk
• [PATCH v2 04/23] xen/arm: sync_bitops   Konrad Rzeszutek Wilk
• [PATCH v2 05/23] xen/arm: empty implementation of grant_table arch specific functions   Konrad Rzeszutek Wilk
• [PATCH v2 06/23] xen: missing includes   Konrad Rzeszutek Wilk
• [PATCH v2 07/23] xen/arm: Xen detection and shared_info page mapping   Konrad Rzeszutek Wilk
• [PATCH v2 08/23] xen/arm: Introduce xen_pfn_t for pfn and mfn types   Konrad Rzeszutek Wilk
• [PATCH v2 09/23] xen/arm: Introduce xen_ulong_t for unsigned long   Konrad Rzeszutek Wilk
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Konrad Rzeszutek Wilk
• [PATCH v2 11/23] xen: do not compile manage, balloon, pci, acpi and cpu_hotplug on ARM   Konrad Rzeszutek Wilk
• [PATCH v2 12/23] xen/arm: introduce CONFIG_XEN on ARM   Konrad Rzeszutek Wilk
• [PATCH v2 13/23] xen/arm: get privilege status   Konrad Rzeszutek Wilk
• [PATCH v2 15/23] xen/arm: receive Xen events on ARM   Konrad Rzeszutek Wilk
• [PATCH v2 16/23] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST   Konrad Rzeszutek Wilk
• [PATCH v2 17/23] xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree   Konrad Rzeszutek Wilk
• [PATCH v2 18/23] xen: allow privcmd for HVM guests   Konrad Rzeszutek Wilk
• [PATCH v2 19/23] xen/arm: compile blkfront and blkback   Konrad Rzeszutek Wilk
• [PATCH v2 20/23] xen/arm: compile netback   Konrad Rzeszutek Wilk
• [PATCH v2 21/23] xen: update xen_add_to_physmap interface   Konrad Rzeszutek Wilk
• [PATCH v2 23/23] [HACK] xen/arm: implement xen_remap_domain_mfn_range   Konrad Rzeszutek Wilk
• [PATCH v2 10/23] xen/arm: compile and run xenbus   Konrad Rzeszutek Wilk
• [v3 1/4] ARM: dma-mapping: atomic_pool with struct page **pages   Konrad Rzeszutek Wilk
• [v3 2/4] ARM: dma-mapping: Refactor out to introduce __in_atomic_pool   Konrad Rzeszutek Wilk
• How to define gpio irq with device tree   Knut Wohlrab
• [PATCH] SPI: IMX5/6: Set inactive state of SPI clock (SCLK CTL) according to SPI clock polarity   Knut Wohlrab
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Bryan Wu
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Bryan Wu
• [PATCH 10/10] leds: renesas: fix error handling   Bryan Wu
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Bryan Wu
• [GIT PULL] LED CPU trigger driver and ARM LED code consolidation (v2)   Bryan Wu
• [PATCH v10 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM   Bryan Wu
• [PATCH 01/18] led-triggers: create a trigger for CPU activity   Bryan Wu
• [PATCH 02/18] ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
• [PATCH 03/18] ARM: mach-realview and mach-versatile: retire custom LED code   Bryan Wu
• [PATCH 04/18] ARM: mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
• [PATCH 05/18] ARM: mach-shark: retire custom LED code   Bryan Wu
• [PATCH 06/18] ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Bryan Wu
• [PATCH 07/18] ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions   Bryan Wu
• [PATCH 08/18] ARM: mach-integrator: retire custom LED code   Bryan Wu
• [PATCH 09/18] ARM: mach-clps711x: retire custom LED code of P720T machine   Bryan Wu
• [PATCH 10/18] ARM: mach-ebsa110: retire custom LED code   Bryan Wu
• [PATCH 11/18] ARM: mach-footbridge: retire custom LED code   Bryan Wu
• [PATCH 12/18] char: nwflash: remove old led event code   Bryan Wu
• [PATCH 13/18] ARM: mach-pxa: retire custom LED code   Bryan Wu
• [PATCH 14/18] ARM: plat-samsung: remove including old leds event API header file   Bryan Wu
• [PATCH 15/18] ARM: mach-pnx4008: remove including old leds event API header file   Bryan Wu
• [PATCH 16/18] ARM: mach-omap1: retire custom LED code   Bryan Wu
• [PATCH 17/18] ARM: mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• [PATCH] [media] atmel_isi: allocate memory to store the isi platform data.   Josh Wu
• [PATCH] [media] atmel_isi: allocate memory to store the isi platform data.   Josh Wu
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Rafael J. Wysocki
• [PATCH v2 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Rafael J. Wysocki
• [PATCH v2 1/2] cpufreq: OMAP: Handle missing frequency table on SMP systems   Rafael J. Wysocki
• [PATCH] cpuidle: Prevent null pointer dereference in cpuidle_coupled_cpu_notify   Rafael J. Wysocki
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Rafael J. Wysocki
• [GIT PULL] Renesas ARM-based SoC fix for v3.6   Rafael J. Wysocki
• [PATCH 2/5] clk: mmp: add clock definition for pxa168   Chao Xie
• [PATCH V3 0/5] clk: mmp: add clock framework for mmp   Chao Xie
• [PATCH V3 1/5] clk: mmp: add mmp specific clocks   Chao Xie
• [PATCH V3 2/5] clk: mmp: add clock definition for pxa168   Chao Xie
• [PATCH V3 3/5] clk: mmp: add clock definition for pxa910   Chao Xie
• [PATCH V3 4/5] clk: mmp: add clock definition for mmp2   Chao Xie
• [PATCH V3 5/5] arm: mmp: make all SOCs use common clock by default   Chao Xie
• [PATCH V3 3/5] clk: mmp: add clock definition for pxa910   Chao Xie
• [PATCH v4 0/5] clk: mmp: add clock framework for mmp   Chao Xie
• [PATCH V4 1/5] clk: mmp: add mmp specific clocks   Chao Xie
• [PATCH V4 2/5] clk: mmp: add clock definition for pxa168   Chao Xie
• [PATCH V4 3/5] clk: mmp: add clock definition for pxa910   Chao Xie
• [PATCH V4 4/5] clk: mmp: add clock definition for mmp2   Chao Xie
• [PATCH V4 5/5] arm: mmp: make all SOCs use common clock by default   Chao Xie
• [PATCH V4 2/5] clk: mmp: add clock definition for pxa168   Chao Xie
• [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Chao Xie
• [PATCH V5 1/5] clk: mmp: add mmp specific clocks   Chao Xie
• [PATCH V5 2/5] clk: mmp: add clock definition for pxa168   Chao Xie
• [PATCH V5 3/5] clk: mmp: add clock definition for pxa910   Chao Xie
• [PATCH V5 4/5] clk: mmp: add clock definition for mmp2   Chao Xie
• [PATCH V5 5/5] arm: mmp: make all SOCs use common clock by default   Chao Xie
• FW: [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Chao Xie
• FW: [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Chao Xie
• [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Chao Xie
• [PATCH 1/5] arm: mmp: make private clock definition exclude from common clock   Chao Xie
• [PATCH 2/5] arm: mmp: move pxa168 clock definition to separated file   Chao Xie
• [PATCH 3/5] arm: mmp: move pxa910 clock definition to separated file   Chao Xie
• [PATCH 4/5] arm: mmp: move mmp2 clock definition to separated file   Chao Xie
• [PATCH 5/5] arm: mmp: remove unused definition in regs-apbc and regs-apmu   Chao Xie
• [PATCH 1/5] arm: mmp: make private clock definition exclude from common clock   Chao Xie
• [PATCH 11/11] pm/drivers: fix use of SIMPLE_DEV_PM_OPS   Herbert Xu
• [PATCH 0/5] hwrng/ARM: OMAP: convert to use runtime PM   Herbert Xu
• [PATCH] ARM: mmp: add USB3.0 PHY support   Yu Xu
• [PATCH 1/1] media: mx3_camera: Improve data bus width check code for probe   Liu Ying
• [PATCH] usb: gadget: remove duplicated include from pxa25x_udc.c   Wei Yongjun
• [PATCH] ARM i.MX: remove duplicated include from clk-imx21.c   Wei Yongjun
• [PATCH] ARM: LPC32xx: remove duplicated include from phy3250.c   Wei Yongjun
• [PATCH] ARM: mxs: remove duplicated include from mach-mxs.c   Wei Yongjun
• [PATCH] ARM: mach-shmobile: remove duplicated include from board-ag5evm.c   Wei Yongjun
• [PATCH 0/5] Add device tree support for on-chip SRAM   Philipp Zabel
• [PATCH 1/5] ARM i.MX: Switch IRAM allocator to device tree initialization   Philipp Zabel
• [PATCH 2/5] ARM i.MX53, i.MX6q: Add IRAM to device tree   Philipp Zabel
• [PATCH 3/5] iram_alloc: store the virt and phys mem address in gen_pool chunks   Philipp Zabel
• [PATCH 4/5] genalloc: add a global pool list, allow to find pools by phys address   Philipp Zabel
• [PATCH 5/5] ARM i.MX: Remove iram_alloc/free, as they are unused in-tree   Philipp Zabel
• [PATCH v2 0/9] Add device tree support for on-chip SRAM   Philipp Zabel
• [PATCH v2 1/9] ARM i.MX: Switch IRAM allocator to device tree initialization   Philipp Zabel
• [PATCH v2 2/9] ARM i.MX53: Add OCRAM to device tree   Philipp Zabel
• [PATCH v2 3/9] ARM i.MX6: Add OCRAM to device tree   Philipp Zabel
• [PATCH v2 4/9] iram_alloc: store the virt and phys mem address in gen_pool chunks   Philipp Zabel
• [PATCH v2 5/9] genalloc: add a global pool list, allow to find pools by phys address   Philipp Zabel
• [PATCH v2 6/9] misc: Generic on-chip SRAM allocation driver   Philipp Zabel
• [PATCH v2 7/9] ARM: i.MX53: use generic on-chip SRAM allocator driver for OCRAM   Philipp Zabel
• [PATCH v2 8/9] ARM: i.MX6: use generic on-chip SRAM allocator driver for OCRAM   Philipp Zabel
• [PATCH v2 9/9] ARM i.MX: remove IRAM_ALLOC facility   Philipp Zabel
• [PATCH v4 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v5 0/3] imx: add usbmisc support   Richard Zhao
• [PATCH v5 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v5 2/3] ARM: imx6q: clk_register_clkdev usbmisc clock   Richard Zhao
• [PATCH v5 3/3] ARM: dts: imx6q-sabrelite: add usbmisc device   Richard Zhao
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Richard Zhao
• [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Richard Zhao
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Richard Zhao
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Richard Zhao
• [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Richard Zhao
• [PATCH v6 0/3] imx: add usbmisc support   Richard Zhao
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v6 2/3] ARM: imx6q: clk_register_clkdev usbmisc clock   Richard Zhao
• [PATCH v6 3/3] ARM: dts: imx6q-sabrelite: add usbmisc device   Richard Zhao
• [PATCH v2 00/11] chipidea/imx: add otg support and some bug fix   Richard Zhao
• [PATCH v2 01/11] USB: chipidea: imx: add pinctrl support   Richard Zhao
• [PATCH v2 02/11] USB: chipidea: delay 2ms before read ID status at probe time   Richard Zhao
• [PATCH v2 03/11] USB: chipidea: move OTGSC_IDIS clearing from ci_role_work to irq handler   Richard Zhao
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH v2 06/11] USB: mxs-phy: add basic otg support   Richard Zhao
• [PATCH v2 07/11] USB: chipidea: add vbus detect for udc   Richard Zhao
• [PATCH v2 08/11] USB: chipidea: convert to use devm_request_irq   Richard Zhao
• [PATCH v2 09/11] USB: chipidea: add -DDEBUG if CONFIG_USB_CHIPIDEA_DEBUG   Richard Zhao
• [PATCH v2 10/11] USB: chipidea: add set_vbus_power support   Richard Zhao
• [PATCH v2 11/11] USB: chipidea: re-order irq handling to avoid unhandled irq   Richard Zhao
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Richard Zhao
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails   Richard Zhao
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH v2 04/11] USB: chipidea: clear gadget struct at udc_start fail path   Richard Zhao
• [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed   Richard Zhao
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH] mtd: use %*ph[CN] to dump small buffers   Jiandong Zheng
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Jiandong Zheng
• [PATCH 4/9] ARM: pmu: remove arm_pmu_type enumeration   Jiandong Zheng
• [GIT PULL] [for 3.6] pull request from dt-pxa branch in pxa git tree   Haojian Zhuang
• [GIT PULL][for 3.7] pull request from dt-mmp branch in pxa git tree   Haojian Zhuang
• [GIT PULL][for 3.7] pull request from board branch in pxa git tree   Haojian Zhuang
• [PATCH v3 2/9] MMC: pxa-mci: add DT bindings   Haojian Zhuang
• [PATCH 6/7] arm: mmp&dove: modify tauros2_init call   Haojian Zhuang
• [PATCH 1/7] ARM: pxa: support CKENC in clk_enable   Haojian Zhuang
• [PATCH v3 4/9] GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip()   Haojian Zhuang
• [GIT PULL][for 3.7] pull request from dt-mmp branch in pxa git tree   Haojian Zhuang
• [PATCH v3 5/9] GPIO: gpio-pxa: fix devicetree functions   Haojian Zhuang
• [PATCH 2/2] GPIO: gpio-pxa: fix devicetree functions   Haojian Zhuang
• [GIT PULL][for 3.7 v2] pull request from dt_mmp branch in pxa git tree   Haojian Zhuang
• [PATCH 2/2] GPIO: gpio-pxa: fix devicetree functions   Haojian Zhuang
• [GIT PULL][for 3.7 v3] pull request from dt_mmp branch in pxa git tree   Haojian Zhuang
• [PATCH 6/6] ARM: dts: add pinctrl in PXA DT files   Haojian Zhuang
• [PATCH 2/6] ARM: pxa remove irq_to_gpio from eeti_ts driver   Haojian Zhuang
• [PATCH 1/6] ARM: pxa: remove irq_to_gpio from ezx-pcap driver   Haojian Zhuang
• [PATCH] ARM: mmp: add USB3.0 PHY support   Haojian Zhuang
• [Openpxa-users] pxa3x0 smart panel interface   Haojian Zhuang
• [PATCH] ARM: mmp: fix potential NULL dereference   Haojian Zhuang
• [PATCH] ARM: mmp: implement DEBUG_LL port choice   Haojian Zhuang
• [GIT PULL][for 3.6] pull request from fixes branch in pxa git tree   Haojian Zhuang
• [GIT PULL][for 3.7] pull request from dt branch in pxa git tree   Haojian Zhuang
• [PATCH 1/3] ARM: pxa: append the definition of CKENC   Haojian Zhuang
• [PATCH 2/3] mtd: nand: append missing parameter and value   Haojian Zhuang
• [PATCH 3/3] ARM: pxa: fix build issue while CONFIG_OF is disabled   Haojian Zhuang
• [GIT PULL][for 3.7] pull request for pxa/dt branch in arm-soc from arch-pxa git tree   Haojian Zhuang
• FW: [PATCH V5 0/5] clk: mmp: add clock framework for mmp   Haojian Zhuang
• Question about ION carveout heap support partial cache flush   Haojian Zhuang
• Question about ION carveout heap support partial cache flush   Haojian Zhuang
• [PATCH 4/4] [RFC] ARM: treewide: manually change more mach-*/*.h includes   Haojian Zhuang
• [PATCH 1/5] arm: mmp: make private clock definition exclude from common clock   Haojian Zhuang
• [PATCH 1/1] arm: KGDB support for PXA   Haojian Zhuang
• [PATCH 1/5] arm: mmp: make private clock definition exclude from common clock   Haojian Zhuang
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Peter Zijlstra
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Peter Zijlstra
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Peter Zijlstra
• RFC: mutex: hung tasks on SMP platforms with asm-generic/mutex-xchg.h   Peter Zijlstra
• [PATCH 2/2] ARM: local timers: add timer support using IO mapped register   Marc Zyngier
• [PATCH 1/2] ARM: local timers: Unmask interrupt before new TVAL is set   Marc Zyngier
• [PATCH v2 0/2] arch_timers patches to enable KVM support   Marc Zyngier
• [PATCH v2 1/2] ARM: arch_timers: enable the use of the virtual timer   Marc Zyngier
• [PATCH v2 2/2] ARM: arch_timers: register a time/cycle counter   Marc Zyngier
• [PATCH 0/7] Allow the kernel to be booted in HYP mode   Marc Zyngier
• [PATCH 1/7] ARM: opcodes: add __ERET/__MSR_ELR_HYP instruction encoding   Marc Zyngier
• [PATCH 2/7] ARM: virt: allow the kernel to be entered in HYP mode   Marc Zyngier
• [PATCH 3/7] ARM: zImage/virt: hyp mode entry support for the zImage loader   Marc Zyngier
• [PATCH 4/7] ARM: virt: Update documentation for hyp mode entry support   Marc Zyngier
• [PATCH 5/7] ARM: virt: Add boot-time diagnostics   Marc Zyngier
• [PATCH 6/7] ARM: virt: Add CONFIG_ARM_VIRT_EXT option   Marc Zyngier
• [PATCH 7/7] ARM: virt: arch_timers: enable access to physical timers   Marc Zyngier
• [PATCH v2 1/2] ARM: arch_timers: enable the use of the virtual timer   Marc Zyngier
• [PATCH 0/3] New algorithm for ASID allocation and rollover   Marc Zyngier
• [PATCH v3 0/2] arch_timers patches to enable KVM support   Marc Zyngier
• [PATCH v3 1/2] ARM: arch_timers: enable the use of the virtual timer   Marc Zyngier
• [PATCH v3 2/2] ARM: arch_timers: register a time/cycle counter   Marc Zyngier
• [PATCH 0/1] ARM: at91: fix drivers broken because of sparse irq support   ludovic.desroches at atmel.com
• [PATCH] ARM: at91: fix drivers broken because of sparse irq support   ludovic.desroches at atmel.com
• [PATCH v2 0/2] ARM: at91: fix drivers broken because of sparse irq support   ludovic.desroches at atmel.com
• [PATCH v2 1/2] ARM: at91: fix system timer irq issue due to sparse irq support   ludovic.desroches at atmel.com
• [PATCH v2 2/2] ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support   ludovic.desroches at atmel.com
• [PATCH] ARM: at91: automatically select DT support for sam9x5 and sam9n12   ludovic.desroches at atmel.com
• [PATCH v2] ARM: at91: select DT support by default   ludovic.desroches at atmel.com
• [RFC PATCH 0/5] fixes and DT support based on Nikolaus TWI driver   ludovic.desroches at atmel.com
• [PATCH 1/5] i2c: at91: add new fixes for some TWI ip versions   ludovic.desroches at atmel.com
• [PATCH 2/5] i2c: at91: add dt support to i2c-at91   ludovic.desroches at atmel.com
• [PATCH 3/5] ARM: at91: add clocks for i2c DT entries   ludovic.desroches at atmel.com
• [PATCH 4/5] ARM: dts: add twi nodes for atmel SOCs   ludovic.desroches at atmel.com
• [PATCH 4/5] ARM: dts: add twi nodes for atmel SOCs   ludovic.desroches at atmel.com
• [PATCH 5/5] ARM: dts: add twi nodes for atmel boards   ludovic.desroches at atmel.com
• [PATCH 0/8] i2c: at91: cleanup and dt support   ludovic.desroches at atmel.com
• [PATCH 1/8] i2c: at91: use managed resources   ludovic.desroches at atmel.com
• [PATCH 2/8] i2c: at91: add warning about transmission issues for some devices   ludovic.desroches at atmel.com
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   ludovic.desroches at atmel.com
• [PATCH 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain   ludovic.desroches at atmel.com
• [PATCH 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain   ludovic.desroches at atmel.com
• [PATCH 5/8] i2c: at91: add dt support to i2c-at91   ludovic.desroches at atmel.com
• [PATCH 6/8] ARM: at91: add clocks for I2C DT entries   ludovic.desroches at atmel.com
• [PATCH 7/8] ARM: dts: add twi nodes for atmel SOCs   ludovic.desroches at atmel.com
• [PATCH 8/8] ARM: dts: add twi nodes for atmel boards   ludovic.desroches at atmel.com
• ARM hugetlb support?   bill4carson
• [PATCH] ARM: mm: MMU mapping of CMA regions   chris_brand at broadcom.com
• DTS support for the Iomega ix2-200   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• PATCH Add support for the Iomega IX2-200 Device Tree   alan butler
• Issues with all kernels after 3.3.7   alan butler
• [PATCH 0/4] dmaengine: add support mmp-pdma   zhangfei gao
• [PATCH v2 1/4] dmaengine: mmp-pdma support   zhangfei gao
• [PATCH v3 3/4] dmatest: add dmaengine_slave_config for DMA_MEMCPY   zhangfei gao
• [PATCH v3 1/4] dmaengine: mmp-pdma support   zhangfei gao
• [PATCH v3 2/4] dmaengine: mmp_tdma: add dt support   zhangfei gao
• [PATCH v3 1/4] dmaengine: mmp-pdma support   zhangfei gao
• Question about ION carveout heap support partial cache flush   zhangfei gao
• Question about ION carveout heap support partial cache flush   zhangfei gao
• [PATCH v4 0/2] dmaengine: add support mmp-pdma   zhangfei gao
• [RFC][PATCH] Disintegrate sharpsl_param.c   dromede at gmail.com
• [PATCH] backlight: corgi_lcd: Fix WARN_ON() when calling corgi_bl_set_intensity.   dromede at gmail.com
• [RFC][PATCH] pxamci: defining CONFIG_REGULATOR_DUMMY may break PXA MMC controller driver.   dromede at gmail.com
• [PATCH 0/2] imx6q: pwm: Activate stop_mode and remove auto enable after configuration   hachimi.samir at gmail.com
• [PATCH 1/2] imx6q: Configure the pwm node for pinmux support   hachimi.samir at gmail.com
• [PATCH 2/2] imx6q: Set pwm control register during enable and config call   hachimi.samir at gmail.com
• [PATCH v2] arm/dts: exynos4: Add DTS files derived from common Exynos4   tobetter at gmail.com
• [PATCH v2] arm/dts: exynos4: Add DTS file for ODROID-X   tobetter at gmail.com
• [PATCH v3] arm/dts: exynos4: Add DTS file for ODROID-X   tobetter at gmail.com
• [PATCH] ARM: EXYNOS: Add audio I2S clock control   tobetter at gmail.com
• [PATCH] pxafb: fix BLW / ELW smart panel timing parameters   pieterg at gmx.com
• [PATCH] pxafb: allow zero for smart panel timings   pieterg at gmx.com
• [PATCH] ARM: S5PV310: Set bit 22 in the PL310 (cache controller) AuxCtlr register   shiraz hashim
• [PATCH] drivers/watchdog: Adding PRCMU based WD for ux500 processors   mathieu.poirier at linaro.org
• [PATCH v2] drivers/watchdog: Adding PRCMU based WD for ux500 processors   mathieu.poirier at linaro.org
• [PATCH] mmc: atmel-mci: not busy flag has also to be used for read operations   ludovic.desroches
• [PATCH RESEND v5 0/4] atmel-mci device tree support   ludovic.desroches
• AT91 RM9200 hangs on delay loop calibration   ludovic.desroches
• [PATCH v2] ARM: at91: select DT support by default   ludovic.desroches
• Kernel oops since v3.5.x on Atmel chips   ludovic.desroches
• JFFS2 issue with v3.5.x and later on Atmel chips at least (was: Kernel oops since v3.5.x on Atmel chips)   ludovic.desroches
• JFFS2 issue with v3.5.x and later on Atmel chips at least   ludovic.desroches
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   ludovic.desroches
• [PATCH v11 4/4] G45 TWI: remove open drain setting for twi function gpios   ludovic.desroches
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   ludovic.desroches
• [PATCH v11 4/4] G45 TWI: remove open drain setting for twi function gpios   ludovic.desroches
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   ludovic.desroches
• [PATCH 2/2] mmc: atmel-mci: AP700x PDC is not connected to MCI   ludovic.desroches
• [PATCH 1/2] mmc: atmel-mci: DMA can be used with other controller   ludovic.desroches
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   ludovic.desroches
• [PATCH v11 0/4] AT91: replace old i2c-at91.c TWI driver   ludovic.desroches
• [PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   ludovic.desroches
• [PATCH 7/8] ARM: dts: add twi nodes for atmel SOCs   ludovic.desroches
• [GIT PULL] Update LZO compression   james northrup
• [Openpxa-users] pxa3x0 smart panel interface   pieterg
• [PATCH] ARM: ixp4xx: move fixed mapping of internal devices into vmalloc region   gerg at snapgear.com
• 报价表(CIF或FOB)   zhenkun44
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   jett zhou
• [V4 3/4] power_supply: Enable battery-charger for 88pm860x   jett zhou
• Crashme test causes arm data abort vector modified   孙明志
• 各位老乡有要装修房子的找我   拓荒牛
• ASoC: SAMSUNG: Change Kconfig to support all EXYNOSs   박상수
• [PATCH] ASoC: SAMSUNG: Add SND_SOC_DAIFMT_CONT option for snd_soc_set_fmt()   박상수