[PATCH 01/11] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Peter Ujfalusi
peter.ujfalusi at ti.com
Wed Aug 8 05:11:31 EDT 2012
Move the McBSP CLKS re-parenting code to ASoC driver from
arch/arm/mach-omap2.
The call fort the re-parenting has been already limited to OMAP2+ SoC in
the ASoC driver. There is no longer need to have callback function for it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
arch/arm/mach-omap2/mcbsp.c | 40 -------------------------------
arch/arm/plat-omap/include/plat/mcbsp.h | 1 -
sound/soc/omap/mcbsp.c | 31 ++++++++++++++++++++----
3 files changed, 26 insertions(+), 46 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 577cb77..ebc801e 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -101,45 +101,6 @@ static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
return 0;
}
-/* McBSP CLKS source switching function */
-static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
- const char *src)
-{
- struct clk *fck_src;
- char *fck_src_name;
- int r;
-
- if (!strcmp(src, "clks_ext"))
- fck_src_name = "pad_fck";
- else if (!strcmp(src, "clks_fclk"))
- fck_src_name = "prcm_fck";
- else
- return -EINVAL;
-
- fck_src = clk_get(dev, fck_src_name);
- if (IS_ERR_OR_NULL(fck_src)) {
- pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
- fck_src_name);
- return -EINVAL;
- }
-
- pm_runtime_put_sync(dev);
-
- r = clk_set_parent(clk, fck_src);
- if (IS_ERR_VALUE(r)) {
- pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
- "clks", fck_src_name);
- clk_put(fck_src);
- return -EINVAL;
- }
-
- pm_runtime_get_sync(dev);
-
- clk_put(fck_src);
-
- return 0;
-}
-
static int omap3_enable_st_clock(unsigned int id, bool enable)
{
unsigned int w;
@@ -181,7 +142,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->reg_size = 4;
pdata->has_ccr = true;
}
- pdata->set_clk_src = omap2_mcbsp_set_clk_src;
/* On OMAP2/3 the McBSP1 port has 6 pin configuration */
if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 1881412..0a7d5ca 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -47,7 +47,6 @@ struct omap_mcbsp_platform_data {
bool has_wakeup; /* Wakeup capability */
bool has_ccr; /* Transceiver has configuration control registers */
int (*enable_st_clock)(unsigned int, bool);
- int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index d33c48b..d901fc0 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include <plat/mcbsp.h>
@@ -726,19 +727,39 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx)
int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id)
{
+ struct clk *fck_src;
const char *src;
+ int r;
if (fck_src_id == MCBSP_CLKS_PAD_SRC)
- src = "clks_ext";
+ src = "pad_fck";
else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
- src = "clks_fclk";
+ src = "prcm_fck";
else
return -EINVAL;
- if (mcbsp->pdata->set_clk_src)
- return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
- else
+ fck_src = clk_get(mcbsp->dev, src);
+ if (IS_ERR_OR_NULL(fck_src)) {
+ dev_err(mcbsp->dev, "CLKS: could not clk_get() %s\n", src);
return -EINVAL;
+ }
+
+ pm_runtime_put_sync(mcbsp->dev);
+
+ r = clk_set_parent(mcbsp->fclk, fck_src);
+ if (r) {
+ dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n",
+ src);
+ clk_put(fck_src);
+ return r;
+ }
+
+ pm_runtime_get_sync(mcbsp->dev);
+
+ clk_put(fck_src);
+
+ return 0;
+
}
int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux)
--
1.7.8.6
More information about the linux-arm-kernel
mailing list