[PATCH v11 3/4] drivers/i2c/busses/i2c-at91.c: add new driver

[ludovic.desroches]

Hi Adrian,

Le 08/27/2012 12:40 PM, Yanes Martinez Adrian a écrit :
> Hi Ludovic,
>
>> Tested on at91rm9200, at91sam9261, at91sam9g20 and at91sam9m10 with
>> eeprom, temperature sensor and rtc devices (and wolfson chip for
>> sam9g20).
>
> concerning the at91rm9200, what was the amount of bytes you transmitted?
>

I have only checked that I can communicate with i2c devices so the 
amount is very low (1-4 bytes).

> Some months ago I performed some testing[1] with the previous version of
> the patch and the main conclusion was that the absence of PDC in the
> AT91RM9200 made this driver unusable in such platform.
>

Does the new driver break something? Was it working with the old one?

There are some issues with which are not related to the driver but to 
the design of the IP. With old I2C versions, using GPIO I2C is recommended.

> Please double check this.
>
> Thanks in advance,
>
> Adrian.
>
> 1 - http://thread.gmane.org/gmane.linux.drivers.i2c/10367/focus=1287445
>

Regards

Ludovic