[PATCH 6/9] ARM: OMAP1: move omap1_bl pdata out of arch/arm/*
Tomi Valkeinen
tomi.valkeinen at ti.com
Wed Aug 29 11:04:24 EDT 2012
On Wed, 2012-08-29 at 02:18 +0300, Igor Grinberg wrote:
> omap1 backlight platform data resides inside plat/board.h while it
> should be inside include/linux/...
> Move the omap1 backlight platform data to
> include/linux/platform_data/.
>
> Cc: Richard Purdie <rpurdie at rpsys.net>
> Cc: Florian Tobias Schandinat <FlorianSchandinat at gmx.de>
> Cc: linux-fbdev at vger.kernel.org
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
> ---
> arch/arm/mach-omap1/board-osk.c | 1 +
> arch/arm/mach-omap1/board-palmte.c | 1 +
> arch/arm/mach-omap1/board-palmtt.c | 1 +
> arch/arm/mach-omap1/board-palmz71.c | 1 +
> arch/arm/plat-omap/include/plat/board.h | 7 -------
> drivers/video/backlight/omap1_bl.c | 2 +-
> include/linux/platform_data/omap1_bl.h | 11 +++++++++++
> 7 files changed, 16 insertions(+), 8 deletions(-)
> create mode 100644 include/linux/platform_data/omap1_bl.h
>
> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
> index 8784705..569b687 100644
> --- a/arch/arm/mach-omap1/board-osk.c
> +++ b/arch/arm/mach-omap1/board-osk.c
> @@ -39,6 +39,7 @@
> #include <linux/mtd/partitions.h>
> #include <linux/mtd/physmap.h>
> #include <linux/i2c/tps65010.h>
> +#include <linux/platform_data/omap1_bl.h>
>
> #include <asm/mach-types.h>
> #include <asm/mach/arch.h>
> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
> index 26bcb9d..7bf00ba 100644
> --- a/arch/arm/mach-omap1/board-palmte.c
> +++ b/arch/arm/mach-omap1/board-palmte.c
> @@ -28,6 +28,7 @@
> #include <linux/interrupt.h>
> #include <linux/apm-emulation.h>
> #include <linux/omapfb.h>
> +#include <linux/platform_data/omap1_bl.h>
>
> #include <asm/mach-types.h>
> #include <asm/mach/arch.h>
> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
> index 4d09944..2cce505 100644
> --- a/arch/arm/mach-omap1/board-palmtt.c
> +++ b/arch/arm/mach-omap1/board-palmtt.c
> @@ -27,6 +27,7 @@
> #include <linux/omapfb.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/ads7846.h>
> +#include <linux/platform_data/omap1_bl.h>
>
> #include <asm/mach-types.h>
> #include <asm/mach/arch.h>
> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
> index 3559803..45ab9f0 100644
> --- a/arch/arm/mach-omap1/board-palmz71.c
> +++ b/arch/arm/mach-omap1/board-palmz71.c
> @@ -30,6 +30,7 @@
> #include <linux/omapfb.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/ads7846.h>
> +#include <linux/platform_data/omap1_bl.h>
>
> #include <asm/mach-types.h>
> #include <asm/mach/arch.h>
> diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
> index 5938c72..d0bc46e 100644
> --- a/arch/arm/plat-omap/include/plat/board.h
> +++ b/arch/arm/plat-omap/include/plat/board.h
> @@ -19,13 +19,6 @@ struct omap_lcd_config {
> u8 data_lines;
> };
>
> -struct device;
> -struct fb_info;
> -struct omap_backlight_config {
> - int default_intensity;
> - int (*set_power)(struct device *dev, int state);
> -};
> -
> /* for TI reference platforms sharing the same debug card */
> extern int debug_card_init(u32 addr, unsigned gpio);
>
> diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
> index bfdc5fb..92257ef 100644
> --- a/drivers/video/backlight/omap1_bl.c
> +++ b/drivers/video/backlight/omap1_bl.c
> @@ -27,9 +27,9 @@
> #include <linux/fb.h>
> #include <linux/backlight.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/omap1_bl.h>
>
> #include <mach/hardware.h>
> -#include <plat/board.h>
> #include <plat/mux.h>
>
> #define OMAPBL_MAX_INTENSITY 0xff
> diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h
> new file mode 100644
> index 0000000..881a8e9
> --- /dev/null
> +++ b/include/linux/platform_data/omap1_bl.h
> @@ -0,0 +1,11 @@
> +#ifndef __OMAP1_BL_H__
> +#define __OMAP1_BL_H__
> +
> +#include <linux/device.h>
You could use struct device; here.
> +
> +struct omap_backlight_config {
> + int default_intensity;
> + int (*set_power)(struct device *dev, int state);
> +};
> +
> +#endif
Acked-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120829/ca68f5be/attachment.sig>
More information about the linux-arm-kernel
mailing list