[PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state

[Hiremath, Vaibhav]

On Tue, Aug 14, 2012 at 12:25:54, AnilKumar, Chimata wrote:
> Hi Vaibhav,
> 
> On Mon, Aug 06, 2012 at 16:59:04, Hiremath, Vaibhav wrote:
> > Ideally in common SoC dtsi file we should set all modules
> > to "disabled" state and it should get enabled in respective
> > EVM/Board dts file as per usage.
> > 
> > This patch sets default status of all modules to "disabled"
> > state in am33xx.dtsi file, and as per board requirement, enabled
> > in board dts file (like, bone, evm, etc...).
> > 
> > Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
> > Cc: Benoit Cousson <b-cousson at ti.com>
> > Cc: Grant Likely <grant.likely at secretlab.ca>
> > Cc: Arnd Bergmann <arnd at arndb.de>
> > CC: Tony Lindgren <tony at atomide.com>
> > ---
> > This patch is tested on BeagleBone platform.
> > 
> >  arch/arm/boot/dts/am335x-bone.dts |    6 ++++++
> >  arch/arm/boot/dts/am335x-evm.dts  |    6 ++++++
> >  arch/arm/boot/dts/am33xx.dtsi     |    9 +++++++++
> >  3 files changed, 21 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> > index a9af4db..df672b4 100644
> > --- a/arch/arm/boot/dts/am335x-bone.dts
> > +++ b/arch/arm/boot/dts/am335x-bone.dts
> > @@ -17,4 +17,10 @@
> >  		device_type = "memory";
> >  		reg = <0x80000000 0x10000000>; /* 256 MB */
> >  	};
> > +
> > +	ocp {
> > +		uart1: serial at 44E09000 {
> > +			       status = "okay";
> > +		       };
> 
> Minor change, correct indentation here.
> 

Thanks Anil for pointing me to this, my vi rules screwed up here,
I will correct it and send next version with Ack-by Arnd.

Thanks,
Vaibhav

> > +	};
> >  };
> > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> > index d6a97d9..00bbae8 100644
> > --- a/arch/arm/boot/dts/am335x-evm.dts
> > +++ b/arch/arm/boot/dts/am335x-evm.dts
> > @@ -17,4 +17,10 @@
> >  		device_type = "memory";
> >  		reg = <0x80000000 0x10000000>; /* 256 MB */
> >  	};
> > +
> > +	ocp {
> > +		uart1: serial at 44E09000 {
> > +			       status = "okay";
> > +		       };
> 
> ditto
> 
> Regards
> AnilKumar
>