[PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Kyungmin Park
kyungmin.park at samsung.com
Tue Aug 7 00:33:27 EDT 2012
On 8/7/12, Praveen Paneri <p.paneri at samsung.com> wrote:
> Hi,
>
> On Mon, Aug 6, 2012 at 3:21 PM, Praveen Paneri <p.paneri at samsung.com>
> wrote:
>> Hi,
>>
>> On Mon, Aug 6, 2012 at 2:53 PM, Heiko Stübner <heiko at sntech.de> wrote:
>>> Am Montag, 6. August 2012, 10:23:52 schrieb Kyungmin Park:
>>>> Hi Praveen,
>>>>
>>>> On 8/6/12, Praveen Paneri <p.paneri at samsung.com> wrote:
>>>> > Hi Heiko,
>>>> >
>>>> > On Mon, Aug 6, 2012 at 3:24 AM, Heiko Stübner <heiko at sntech.de>
>>>> > wrote:
>>>> >> Hi Praveen,
>>>> >>
>>>> >> Am Mittwoch, 1. August 2012, 15:05:47 schrieb Praveen Paneri:
>>>> >>> This driver uses usb_phy interface to interact with s3c-hsotg.
>>>> >>> Supports
>>>> >>> phy_init and phy_shutdown functions to enable/disable phy. Tested
>>>> >>> with
>>>> >>> smdk6410 and smdkv310. More SoCs can be brought under later.
>>>> >>
>>>> >> Looks cool.
>>>> >
>>>> > Thanks
>>>> >
>>>> >> From what I've seen the phy controllers on newer Samsung SoCs are
>>>> >> still
>>>> >> somewhat similar to the one on my s3c2416/2450 machines. So hopefully
>>>> >> at
>>>> >> some
>>>> >> point after the driver has settled, I'll find the time to add
>>>> >> support
>>>> >> for these to the phy driver.
>>>> >
>>>> > Yes! that's great.
>>>> >
>>>> >> Out of curiosity, what does the "sec" in sec_usbphy for?
>>>> >
>>>> > Its Samsung Electronics Co. :)
>>>>
>>>> I'm also prefer to use 'samsung' or 'exynos'. Since I didn't see the
>>>> 'sec' prefix for samsung drivers.
>>>
>>> I'd second that. All new generic samsung drivers look like this (i.e.
>>> gpio-
>>> samsung, pwm-samsung).
> On the second thought I am thinking 'sec' is shorter and cooler. I
> know that it has not
I also think about it. but most of people think 'sec' is "Securities
and Exchange Commission" or security instead of "Samsung Electronics".
Ans TLA is avoid if possible.
Thank you,
Kyungmin Park
> been used anywhere else but there is always a first time :-P The
> shorter string helps in
> writing the code; especially when we have 80 character restriction. If
> you go through
> this driver itself you will realize this. Also there was a suggestion
> some time back to
> use 'sec' instead of 'samsung'.
> This is just my view about it. Please comment.
>
> Praveen
>
>>>
>>> Just checked the datasheets again. This general phy type is used in some
>>> form
>>> down to the S3C2443, so I'd prefer something with samsung in the name
>>> :-)
>> Yes! That makes sense. I will change the name to samsung_usbphy
>>
>> Praveen
>>>
>>>
>>> Heiko
>>>
>>>>
>>>> Thank you,
>>>> Kyungmin Park
>>>>
>>>> > Praveen
>>>> >
>>>> >>> Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
>>>> >>
>>>> >> Acked-by: Heiko Stuebner <heiko at sntech.de>
>>>> >>
>>>> >>
>>>> >> Heiko
>>>> >>
>>>> >>> ---
>>>> >>>
>>>> >>> .../devicetree/bindings/usb/samsung-usbphy.txt | 9 +
>>>> >>> drivers/usb/phy/Kconfig | 8 +
>>>> >>> drivers/usb/phy/Makefile | 1 +
>>>> >>> drivers/usb/phy/sec_usbphy.c | 354
>>>> >>>
>>>> >>> ++++++++++++++++++++ drivers/usb/phy/sec_usbphy.h
>>>> >>>
>>>> >>> 48 +++
>>>> >>> include/linux/platform_data/s3c-hsotg.h | 5 +
>>>> >>> 6 files changed, 425 insertions(+), 0 deletions(-)
>>>> >>> create mode 100644
>>>> >>>
>>>> >>> Documentation/devicetree/bindings/usb/samsung-usbphy.txt create
>>>> >>> mode
>>>> >>> 100644 drivers/usb/phy/sec_usbphy.c
>>>> >>>
>>>> >>> create mode 100644 drivers/usb/phy/sec_usbphy.h
>>>> >>>
>>>> >>> diff --git
>>>> >>> a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>>> >>> b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt new file
>>>> >>> mode 100644
>>>> >>> index 0000000..fefd9c8
>>>> >>> --- /dev/null
>>>> >>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>>> >>> @@ -0,0 +1,9 @@
>>>> >>> +* Samsung's usb phy transceiver
>>>> >>> +
>>>> >>> +The Samsung's phy transceiver is used for controlling usb otg phy
>>>> >>> for
>>>> >>> +s3c-hsotg usb device controller.
>>>> >>> +
>>>> >>> +Required properties:
>>>> >>> +- compatible : should be "samsung,exynos4210-usbphy"
>>>> >>> +- reg : base physical address of the phy registers and length of
>>>> >>> memory mapped + region.
>>>> >>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>>>> >>> index e7cf84f..abbebe2 100644
>>>> >>> --- a/drivers/usb/phy/Kconfig
>>>> >>> +++ b/drivers/usb/phy/Kconfig
>>>> >>> @@ -15,3 +15,11 @@ config USB_ISP1301
>>>> >>>
>>>> >>> To compile this driver as a module, choose M here: the
>>>> >>> module will be called isp1301.
>>>> >>>
>>>> >>> +
>>>> >>> +config SEC_USBPHY
>>>> >>> + bool "Samsung USB PHY controller Driver"
>>>> >>> + depends on USB_S3C_HSOTG
>>>> >>> + select USB_OTG_UTILS
>>>> >>> + help
>>>> >>> + Enable this to support Samsung USB phy controller for
>>>> >>> samsung
>>>> >>> + SoCs.
>>>> >>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>>>> >>> index eca095b..6bb66f0 100644
>>>> >>> --- a/drivers/usb/phy/Makefile
>>>> >>> +++ b/drivers/usb/phy/Makefile
>>>> >>> @@ -5,3 +5,4 @@
>>>> >>>
>>>> >>> ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>>> >>>
>>>> >>> obj-$(CONFIG_USB_ISP1301) += isp1301.o
>>>> >>>
>>>> >>> +obj-$(CONFIG_SEC_USBPHY) += sec_usbphy.o
>>>> >>> diff --git a/drivers/usb/phy/sec_usbphy.c
>>>> >>> b/drivers/usb/phy/sec_usbphy.c new file mode 100644
>>>> >>> index 0000000..33119eb
>>>> >>> --- /dev/null
>>>> >>> +++ b/drivers/usb/phy/sec_usbphy.c
>>>> >>> @@ -0,0 +1,354 @@
>>>> >>> +/* linux/drivers/usb/phy/sec_usbphy.c
>>>> >>> + *
>>>> >>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>>>> >>> + * http://www.samsung.com
>>>> >>> + *
>>>> >>> + * Author: Praveen Paneri <p.paneri at samsung.com>
>>>> >>> + *
>>>> >>> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG
>>>> >>> controller + *
>>>> >>> + * This program is free software; you can redistribute it and/or
>>>> >>> modify + * it under the terms of the GNU General Public License
>>>> >>> version 2 as + * published by the Free Software Foundation.
>>>> >>> + *
>>>> >>> + * This program is distributed in the hope that it will be useful,
>>>> >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>>> >>> + * GNU General Public License for more details.
>>>> >>> + *
>>>> >>> + * You should have received a copy of the GNU General Public
>>>> >>> License
>>>> >>> + * along with this program; if not, write to the Free Software
>>>> >>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>>> >>> +*/
>>>> >>> +
>>>> >>> +#include <linux/module.h>
>>>> >>> +#include <linux/platform_device.h>
>>>> >>> +#include <linux/clk.h>
>>>> >>> +#include <linux/delay.h>
>>>> >>> +#include <linux/err.h>
>>>> >>> +#include <linux/io.h>
>>>> >>> +#include <linux/of.h>
>>>> >>> +#include <linux/usb/otg.h>
>>>> >>> +#include <linux/platform_data/s3c-hsotg.h>
>>>> >>> +
>>>> >>> +#include "sec_usbphy.h"
>>>> >>> +
>>>> >>> +enum sec_cpu_type {
>>>> >>> + TYPE_S3C64XX,
>>>> >>> + TYPE_EXYNOS4210,
>>>> >>> +};
>>>> >>> +
>>>> >>> +/*
>>>> >>> + * struct sec_usbphy - transceiver driver state
>>>> >>> + * @phy: transceiver structure
>>>> >>> + * @plat: platform data
>>>> >>> + * @dev: The parent device supplied to the probe function
>>>> >>> + * @clk: usb phy clock
>>>> >>> + * @regs: usb phy register memory base
>>>> >>> + * @cpu_type: machine identifier
>>>> >>> + */
>>>> >>> +struct sec_usbphy {
>>>> >>> + struct usb_phy phy;
>>>> >>> + struct s3c_usbphy_plat *plat;
>>>> >>> + struct device *dev;
>>>> >>> + struct clk *clk;
>>>> >>> + void __iomem *regs;
>>>> >>> + int cpu_type;
>>>> >>> +};
>>>> >>> +
>>>> >>> +#define phy_to_sec(x) container_of((x), struct
>>>> >>> sec_usbphy, phy)
>>>> >>> +
>>>> >>> +/*
>>>> >>> + * Enables or disables the phy clock
>>>> >>> + * returns 0 on success else the error
>>>> >>> + */
>>>> >>> +static int sec_usbphy_clk_control(struct sec_usbphy *sec, bool on)
>>>> >>> +{
>>>> >>> + if (on) {
>>>> >>> + if (!sec->clk) {
>>>> >>> + sec->clk = clk_get(sec->dev, "otg");
>>>> >>> + if (IS_ERR(sec->clk)) {
>>>> >>> + dev_err(sec->dev, "Failed to get otg
>>>> >>> clock\n");
>>>> >>> + return PTR_ERR(sec->clk);
>>>> >>> + }
>>>> >>> + }
>>>> >>> + clk_enable(sec->clk);
>>>> >>> + } else {
>>>> >>> + clk_disable(sec->clk);
>>>> >>> + clk_put(sec->clk);
>>>> >>> + }
>>>> >>> +
>>>> >>> + return 0;
>>>> >>> +}
>>>> >>> +
>>>> >>> +/*
>>>> >>> + * Returns reference clock frequency
>>>> >>> + */
>>>> >>> +static int sec_usbphy_get_refclk_freq(struct sec_usbphy *sec)
>>>> >>> +{
>>>> >>> + struct clk *ref_clk;
>>>> >>> + int refclk_freq = 0;
>>>> >>> +
>>>> >>> + ref_clk = clk_get(sec->dev, "xusbxti");
>>>> >>> + if (IS_ERR(ref_clk)) {
>>>> >>> + dev_err(sec->dev, "Failed to get reference clock\n");
>>>> >>> + return PTR_ERR(ref_clk);
>>>> >>> + }
>>>> >>> +
>>>> >>> + switch (clk_get_rate(ref_clk)) {
>>>> >>> + case 12 * MHZ:
>>>> >>> + refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
>>>> >>> + break;
>>>> >>> + case 24 * MHZ:
>>>> >>> + refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
>>>> >>> + break;
>>>> >>> + default:
>>>> >>> + case 48 * MHZ:
>>>> >>> + /* default reference clock */
>>>> >>> + refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
>>>> >>> + break;
>>>> >>> + }
>>>> >>> + clk_put(ref_clk);
>>>> >>> +
>>>> >>> + return refclk_freq;
>>>> >>> +}
>>>> >>> +
>>>> >>> +static void sec_usbphy_enable(struct sec_usbphy *sec)
>>>> >>> +{
>>>> >>> + void __iomem *regs = sec->regs;
>>>> >>> + u32 phypwr;
>>>> >>> + u32 phyclk;
>>>> >>> + u32 rstcon;
>>>> >>> +
>>>> >>> + /* set clock frequency for PLL */
>>>> >>> + phyclk = sec_usbphy_get_refclk_freq(sec);
>>>> >>> + phypwr = readl(regs + S3C_PHYPWR);
>>>> >>> + rstcon = readl(regs + S3C_RSTCON);
>>>> >>> +
>>>> >>> + switch (sec->cpu_type) {
>>>> >>> + case TYPE_S3C64XX:
>>>> >>> + phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
>>>> >>> + phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
>>>> >>> + rstcon |= S3C_RSTCON_PHY;
>>>> >>> + break;
>>>> >>> + case TYPE_EXYNOS4210:
>>>> >>> + phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
>>>> >>> + rstcon |= S3C_RSTCON_PHY;
>>>> >>> + default:
>>>> >>> + break;
>>>> >>> + }
>>>> >>> +
>>>> >>> + writel(phyclk, regs + S3C_PHYCLK);
>>>> >>> + /* set to normal of PHY0 */
>>>> >>> + writel(phypwr, regs + S3C_PHYPWR);
>>>> >>> + /* reset all ports of PHY and Link */
>>>> >>> + writel(rstcon, regs + S3C_RSTCON);
>>>> >>> + udelay(10);
>>>> >>> + rstcon &= ~S3C_RSTCON_PHY;
>>>> >>> + writel(rstcon, regs + S3C_RSTCON);
>>>> >>> +}
>>>> >>> +
>>>> >>> +static void sec_usbphy_disable(struct sec_usbphy *sec)
>>>> >>> +{
>>>> >>> + void __iomem *regs = sec->regs;
>>>> >>> + u32 phypwr;
>>>> >>> +
>>>> >>> + phypwr = readl(regs + S3C_PHYPWR);
>>>> >>> +
>>>> >>> + switch (sec->cpu_type) {
>>>> >>> + case TYPE_S3C64XX:
>>>> >>> + phypwr |= S3C_PHYPWR_NORMAL_MASK;
>>>> >>> + break;
>>>> >>> + case TYPE_EXYNOS4210:
>>>> >>> + phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
>>>> >>> + default:
>>>> >>> + break;
>>>> >>> + }
>>>> >>> +
>>>> >>> + /* unset to normal of PHY0 */
>>>> >>> + writel(phypwr, regs + S3C_PHYPWR);
>>>> >>> +}
>>>> >>> +
>>>> >>> +/*
>>>> >>> + * The function passed to the usb driver for phy initialization
>>>> >>> + */
>>>> >>> +static int sec_usbphy_init(struct usb_phy *phy)
>>>> >>> +{
>>>> >>> + struct sec_usbphy *sec;
>>>> >>> + int ret = 0;
>>>> >>> +
>>>> >>> + sec = phy_to_sec(phy);
>>>> >>> +
>>>> >>> + /* Enable the phy clock */
>>>> >>> + ret = sec_usbphy_clk_control(sec, true);
>>>> >>> + if (ret) {
>>>> >>> + dev_err(sec->dev, "phy clock enable failed\n");
>>>> >>> + return ret;
>>>> >>> + }
>>>> >>> +
>>>> >>> + /* Disable phy isolation */
>>>> >>> + if (sec->plat && sec->plat->pmu_isolation)
>>>> >>> + sec->plat->pmu_isolation(false);
>>>> >>> +
>>>> >>> + /* Initialize usb phy registers */
>>>> >>> + sec_usbphy_enable(sec);
>>>> >>> + return ret;
>>>> >>> +}
>>>> >>> +
>>>> >>> +/*
>>>> >>> + * The function passed to the usb driver for phy shutdown
>>>> >>> + */
>>>> >>> +static void sec_usbphy_shutdown(struct usb_phy *phy)
>>>> >>> +{
>>>> >>> + struct sec_usbphy *sec;
>>>> >>> +
>>>> >>> + sec = phy_to_sec(phy);
>>>> >>> +
>>>> >>> + /* De-initialize usb phy registers */
>>>> >>> + sec_usbphy_disable(sec);
>>>> >>> +
>>>> >>> + /* Enable phy isolation */
>>>> >>> + if (sec->plat && sec->plat->pmu_isolation)
>>>> >>> + sec->plat->pmu_isolation(true);
>>>> >>> +
>>>> >>> + /* Disable the phy clock */
>>>> >>> + sec_usbphy_clk_control(sec, false);
>>>> >>> +}
>>>> >>> +
>>>> >>> +static const struct of_device_id sec_usbphy_dt_match[];
>>>> >>> +
>>>> >>> +static inline int sec_usbphy_get_driver_data(struct
>>>> >>> platform_device
>>>> >>> *pdev)
>>>> >>> +{
>>>> >>> +#ifdef CONFIG_OF
>>>> >>> + int data;
>>>> >>> + if (pdev->dev.of_node) {
>>>> >>> + const struct of_device_id *match;
>>>> >>> + match = of_match_node(sec_usbphy_dt_match,
>>>> >>> pdev->dev.of_node);
>>>> >>> + data = (int) match->data;
>>>> >>> + return data;
>>>> >>> + }
>>>> >>> +#endif
>>>> >>> + return platform_get_device_id(pdev)->driver_data;
>>>> >>> +}
>>>> >>> +
>>>> >>> +static int __devinit sec_usbphy_probe(struct platform_device
>>>> >>> *pdev)
>>>> >>> +{
>>>> >>> + struct sec_usbphy *sec;
>>>> >>> + struct s3c_usbphy_plat *pdata;
>>>> >>> + struct device *dev = &pdev->dev;
>>>> >>> + struct resource *phy_mem;
>>>> >>> + void __iomem *phy_base;
>>>> >>> + int ret;
>>>> >>> +
>>>> >>> + pdata = pdev->dev.platform_data;
>>>> >>> + if (!pdata) {
>>>> >>> + dev_err(&pdev->dev, "%s: no platform data defined\n",
>>>> >>> __func__);
>>>> >>> + return -EINVAL;
>>>> >>> + }
>>>> >>> +
>>>> >>> + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>> >>> + if (!phy_mem) {
>>>> >>> + dev_err(dev, "%s: missing mem resource\n", __func__);
>>>> >>> + return -ENODEV;
>>>> >>> + }
>>>> >>> +
>>>> >>> + phy_base = devm_request_and_ioremap(dev, phy_mem);
>>>> >>> + if (!phy_base) {
>>>> >>> + dev_err(dev, "%s: register mapping failed\n",
>>>> >>> __func__);
>>>> >>> + return -ENXIO;
>>>> >>> + }
>>>> >>> +
>>>> >>> + sec = devm_kzalloc(dev, sizeof(*sec), GFP_KERNEL);
>>>> >>> + if (!sec)
>>>> >>> + return -ENOMEM;
>>>> >>> +
>>>> >>> + sec->dev = &pdev->dev;
>>>> >>> + sec->plat = pdata;
>>>> >>> + sec->regs = phy_base;
>>>> >>> + sec->phy.dev = sec->dev;
>>>> >>> + sec->phy.label = "sec-usbphy";
>>>> >>> + sec->phy.init = sec_usbphy_init;
>>>> >>> + sec->phy.shutdown = sec_usbphy_shutdown;
>>>> >>> + sec->cpu_type = sec_usbphy_get_driver_data(pdev);
>>>> >>> +
>>>> >>> + ret = usb_add_phy(&sec->phy, USB_PHY_TYPE_USB2);
>>>> >>> + if (ret)
>>>> >>> + goto err;
>>>> >>> +
>>>> >>> + platform_set_drvdata(pdev, sec);
>>>> >>> +
>>>> >>> + dev_info(&pdev->dev, "Initialized samsung USB OTG PHY
>>>> >>> module\n");
>>>> >>> +err:
>>>> >>> + return ret;
>>>> >>> +}
>>>> >>> +
>>>> >>> +static int __exit sec_usbphy_remove(struct platform_device *pdev)
>>>> >>> +{
>>>> >>> + struct sec_usbphy *sec = platform_get_drvdata(pdev);
>>>> >>> +
>>>> >>> + usb_remove_phy(&sec->phy);
>>>> >>> +
>>>> >>> + if (sec->clk) {
>>>> >>> + clk_put(sec->clk);
>>>> >>> + sec->clk = NULL;
>>>> >>> + }
>>>> >>> +
>>>> >>> + return 0;
>>>> >>> +}
>>>> >>> +
>>>> >>> +#ifdef CONFIG_OF
>>>> >>> +static const struct of_device_id sec_usbphy_dt_match[] = {
>>>> >>> + {
>>>> >>> + .compatible = "samsung,s3c64xx-usbphy",
>>>> >>> + .data = (void *)TYPE_S3C64XX,
>>>> >>> + }, {
>>>> >>> + .compatible = "samsung,exynos4210-usbphy",
>>>> >>> + .data = (void *)TYPE_EXYNOS4210,
>>>> >>> + },
>>>> >>> + {},
>>>> >>> +};
>>>> >>> +MODULE_DEVICE_TABLE(of, sec_usbphy_dt_match);
>>>> >>> +#else
>>>> >>> +#define sec_usbphy_dt_match NULL
>>>> >>> +#endif
>>>> >>> +
>>>> >>> +static struct platform_device_id sec_usbphy_driver_ids[] = {
>>>> >>> + {
>>>> >>> + .name = "s3c64xx-usbphy",
>>>> >>> + .driver_data = TYPE_S3C64XX,
>>>> >>> + }, {
>>>> >>> + .name = "exynos4210-usbphy",
>>>> >>> + .driver_data = TYPE_EXYNOS4210,
>>>> >>> + },
>>>> >>> + {},
>>>> >>> +};
>>>> >>> +
>>>> >>> +MODULE_DEVICE_TABLE(platform, sec_usbphy_driver_ids);
>>>> >>> +
>>>> >>> +static struct platform_driver sec_usbphy_driver = {
>>>> >>> + .probe = sec_usbphy_probe,
>>>> >>> + .remove = __devexit_p(sec_usbphy_remove),
>>>> >>> + .id_table = sec_usbphy_driver_ids,
>>>> >>> + .driver = {
>>>> >>> + .name = "sec-usbphy",
>>>> >>> + .owner = THIS_MODULE,
>>>> >>> + .of_match_table = sec_usbphy_dt_match,
>>>> >>> + },
>>>> >>> +};
>>>> >>> +
>>>> >>> +static int __init sec_usbphy_driver_init(void)
>>>> >>> +{
>>>> >>> + return platform_driver_register(&sec_usbphy_driver);
>>>> >>> +}
>>>> >>> +subsys_initcall(sec_usbphy_driver_init);
>>>> >>> +
>>>> >>> +static void __exit sec_usbphy_driver_exit(void)
>>>> >>> +{
>>>> >>> + return platform_driver_unregister(&sec_usbphy_driver);
>>>> >>> +}
>>>> >>> +module_exit(sec_usbphy_driver_exit);
>>>> >>> +
>>>> >>> +MODULE_DESCRIPTION("Samsung USB phy controller");
>>>> >>> +MODULE_AUTHOR("Praveen Paneri <p.paneri at samsung.com>");
>>>> >>> +MODULE_LICENSE("GPL");
>>>> >>> +MODULE_ALIAS("platform:sec-usbphy");
>>>> >>> diff --git a/drivers/usb/phy/sec_usbphy.h
>>>> >>> b/drivers/usb/phy/sec_usbphy.h new file mode 100644
>>>> >>> index 0000000..06e81d4
>>>> >>> --- /dev/null
>>>> >>> +++ b/drivers/usb/phy/sec_usbphy.h
>>>> >>> @@ -0,0 +1,48 @@
>>>> >>> +/*
>>>> >>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
>>>> >>> + * Author: Yulgon Kim <yulgon.kim at samsung.com>
>>>> >>> + * Author: Joonyoung Shim <jy0922.shim at samsung.com>
>>>> >>> + * Author: Praveen Paneri <p.paneri at samsung.com>
>>>> >>> + *
>>>> >>> + * This program is free software; you can redistribute it and/or
>>>> >>> modify
>>>> >>> it + * under the terms of the GNU General Public License as
>>>> >>> published by the + * Free Software Foundation; either version 2 of
>>>> >>> the License, or
>>>> >>> (at your + * option) any later version.
>>>> >>> + */
>>>> >>> +
>>>> >>> +#ifndef __SEC_USBPHY_H
>>>> >>> +#define __SEC_USBPHY_H
>>>> >>> +
>>>> >>> +#define S3C_PHYPWR (0x00)
>>>> >>> +
>>>> >>> +#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0)
>>>> >>> +#define S3C_PHYPWR_OTG_DISABLE (1 << 4)
>>>> >>> +#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3)
>>>> >>> +#define S3C_PHYPWR_FORCE_SUSPEND (1 << 1)
>>>> >>> +/* For Exynos4 */
>>>> >>> +#define EXYNOS4_PHYPWR_NORMAL_MASK (0x39 << 0)
>>>> >>> +#define EXYNOS4_PHYPWR_SLEEP (1 << 5)
>>>> >>> +
>>>> >>> +#define S3C_PHYCLK (0x04)
>>>> >>> +
>>>> >>> +#define S3C_PHYCLK_MODE_SERIAL (1 << 6)
>>>> >>> +#define S3C_PHYCLK_EXT_OSC (1 << 5)
>>>> >>> +#define S3C_PHYCLK_COMMON_ON_N (1 << 4)
>>>> >>> +#define S3C_PHYCLK_ID_PULL (1 << 2)
>>>> >>> +#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
>>>> >>> +#define S3C_PHYCLK_CLKSEL_SHIFT (0)
>>>> >>> +#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
>>>> >>> +#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
>>>> >>> +#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
>>>> >>> +
>>>> >>> +#define S3C_RSTCON (0x08)
>>>> >>> +
>>>> >>> +#define S3C_RSTCON_PHYCLK (1 << 2)
>>>> >>> +#define S3C_RSTCON_HCLK (1 << 1)
>>>> >>> +#define S3C_RSTCON_PHY (1 << 0)
>>>> >>> +
>>>> >>> +#ifndef MHZ
>>>> >>> +#define MHZ (1000*1000)
>>>> >>> +#endif
>>>> >>> +
>>>> >>> +#endif /* __SEC_USBPHY_H */
>>>> >>> diff --git a/include/linux/platform_data/s3c-hsotg.h
>>>> >>> b/include/linux/platform_data/s3c-hsotg.h index 8b79e09..25ed31e
>>>> >>> 100644
>>>> >>> --- a/include/linux/platform_data/s3c-hsotg.h
>>>> >>> +++ b/include/linux/platform_data/s3c-hsotg.h
>>>> >>> @@ -35,6 +35,11 @@ struct s3c_hsotg_plat {
>>>> >>>
>>>> >>> int (*phy_exit)(struct platform_device *pdev, int type);
>>>> >>>
>>>> >>> };
>>>> >>>
>>>> >>> +struct s3c_usbphy_plat {
>>>> >>> + void (*pmu_isolation)(int on);
>>>> >>> +};
>>>> >>> +
>>>> >>>
>>>> >>> extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
>>>> >>>
>>>> >>> +extern void s3c_usbphy_set_platdata(struct s3c_usbphy_plat *pd);
>>>> >>>
>>>> >>> #endif /* __LINUX_USB_S3C_HSOTG_H */
>>>> >>
>>>> >> --
>>>> >> To unsubscribe from this list: send the line "unsubscribe linux-usb"
>>>> >> in
>>>> >> the body of a message to majordomo at vger.kernel.org
>>>> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>> >
>>>> > --
>>>> > To unsubscribe from this list: send the line "unsubscribe
>>>> > linux-samsung-soc" in
>>>> > the body of a message to majordomo at vger.kernel.org
>>>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>>> linux-samsung-soc" in
>>> the body of a message to majordomo at vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the linux-arm-kernel
mailing list