[PATCH 2/3] ARM: Kirkwood: ts219: fix Makefile.boot after dts was split in two

[Andrew Lunn]

On Sat, Aug 11, 2012 at 02:39:46AM +0000, Jason Cooper wrote:
> Signed-off-by: Jason Cooper <jason at lakedaemon.net>
> ---
>  arch/arm/mach-kirkwood/Makefile.boot |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
> index 2a576ab..2ad83e2 100644
> --- a/arch/arm/mach-kirkwood/Makefile.boot
> +++ b/arch/arm/mach-kirkwood/Makefile.boot
> @@ -7,7 +7,7 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
>  dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
>  dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
>  dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
> -dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
> +dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb kirkwood-ts219-6282.dtb

A fix for this has already been accepted into arm-soc for the next rc.

  Andrew

>  dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
>  dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
>  dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
> -- 
> 1.7.8.6
>