[PATCH 4/4] arm: at91: at91sam9x5: fix gpio number per bank

[Nicolas Ferre]

On 07/15/2012 03:40 PM, Jean-Christophe PLAGNIOL-VILLARD :
> On the serie 5 bank b and d have 19 and 22 pins only.

No, it is not understandable.

> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> ---
>  .../devicetree/bindings/gpio/gpio_atmel.txt        |    5 +++
>  arch/arm/boot/dts/at91sam9x5.dtsi                  |    2 ++
>  arch/arm/mach-at91/gpio.c                          |   33 +++++++++++++-------
>  3 files changed, 29 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> index 66efc80..d8dd425 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> @@ -9,6 +9,10 @@ Required properties:
>    unused).
>  - gpio-controller: Marks the device node as a GPIO controller.
>  
> +optional properties:
> +- gpio-nb: Number of gpio if absent 32.

Cf. Olof's comments.

> +
> +
>  Example:
>  	pioA: gpio at fffff200 {
>  		compatible = "atmel,at91rm9200-gpio";
> @@ -16,5 +20,6 @@ Example:
>  		interrupts = <2 4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +                gpio-nb = <32>;

No need: 32 is the default.

>  	};
>  
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index e25c8d0..e4d785b 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -132,6 +132,7 @@
>  					interrupts = <2 4>;
>  					#gpio-cells = <2>;
>  					gpio-controller;
> +					gpio-nb = <19>;
>  					interrupt-controller;
>  				};
>  
> @@ -150,6 +151,7 @@
>  					interrupts = <3 4>;
>  					#gpio-cells = <2>;
>  					gpio-controller;
> +					gpio-nb = <22>;
>  					interrupt-controller;
>  				};
>  			};
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index 3833f82..1ab06e8 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -31,6 +31,8 @@
>  
>  #include "generic.h"
>  
> +#define MAX_NB_GPIO_PER_BANK	32
> +
>  struct at91_gpio_chip {
>  	struct gpio_chip	chip;
>  	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
> @@ -55,7 +57,7 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
>  					unsigned offset);
>  static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
>  
> -#define AT91_GPIO_CHIP(name, nr_gpio)					\
> +#define AT91_GPIO_CHIP(name)						\
>  	{								\
>  		.chip = {						\
>  			.label		  = name,			\
> @@ -67,16 +69,16 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
>  			.set		  = at91_gpiolib_set,		\
>  			.dbg_show	  = at91_gpiolib_dbg_show,	\
>  			.to_irq		  = at91_gpiolib_to_irq,	\
> -			.ngpio		  = nr_gpio,			\
> +			.ngpio		  = MAX_NB_GPIO_PER_BANK,	\
>  		},							\
>  	}
>  
>  static struct at91_gpio_chip gpio_chip[] = {
> -	AT91_GPIO_CHIP("pioA", 32),
> -	AT91_GPIO_CHIP("pioB", 32),
> -	AT91_GPIO_CHIP("pioC", 32),
> -	AT91_GPIO_CHIP("pioD", 32),
> -	AT91_GPIO_CHIP("pioE", 32),
> +	AT91_GPIO_CHIP("pioA"),
> +	AT91_GPIO_CHIP("pioB"),
> +	AT91_GPIO_CHIP("pioC"),
> +	AT91_GPIO_CHIP("pioD"),
> +	AT91_GPIO_CHIP("pioE"),
>  };
>  
>  static int gpio_banks;
> @@ -91,7 +93,7 @@ static unsigned long at91_gpio_caps;
>  
>  static inline void __iomem *pin_to_controller(unsigned pin)
>  {
> -	pin /= 32;
> +	pin /= MAX_NB_GPIO_PER_BANK;
>  	if (likely(pin < gpio_banks))
>  		return gpio_chip[pin].regbase;
>  
> @@ -100,7 +102,7 @@ static inline void __iomem *pin_to_controller(unsigned pin)
>  
>  static inline unsigned pin_to_mask(unsigned pin)
>  {
> -	return 1 << (pin % 32);
> +	return 1 << (pin % MAX_NB_GPIO_PER_BANK);
>  }
>  
>  
> @@ -998,6 +1000,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
>  {
>  	int alias_idx;
>  	struct at91_gpio_chip *at91_gpio;
> +	uint32_t ngpio;
>  
>  	if (!np)
>  		return;
> @@ -1010,7 +1013,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
>  	}
>  
>  	at91_gpio = &gpio_chip[alias_idx];
> -	at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio;
> +	at91_gpio->chip.base = alias_idx * MAX_NB_GPIO_PER_BANK;
>  
>  	at91_gpio->regbase = of_iomap(np, 0);
>  	if (!at91_gpio->regbase) {
> @@ -1030,6 +1033,14 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
>  	if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
>  		at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
>  
> +	if (!of_property_read_u32(np, "gpio-nb", &ngpio)) {
> +		if (ngpio >= MAX_NB_GPIO_PER_BANK)
> +			pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
> +			       alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
> +		else
> +			at91_gpio->chip.ngpio = ngpio;
> +	}
> +
>  	/* Setup clock */
>  	if (at91_gpio_setup_clk(alias_idx))
>  		goto ioremap_err;
> @@ -1067,7 +1078,7 @@ static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
>  {
>  	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
>  
> -	at91_gpio->chip.base = idx * at91_gpio->chip.ngpio;
> +	at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK;
>  	at91_gpio->pioc_hwirq = pioc_hwirq;
>  	at91_gpio->pioc_idx = idx;

Otherwise, I like it: so please resend it with corrections.

Bye,
-- 
Nicolas Ferre