[PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Praveen Paneri
p.paneri at samsung.com
Fri Aug 10 03:16:57 EDT 2012
On Fri, Aug 10, 2012 at 12:34 PM, Felipe Balbi <balbi at ti.com> wrote:
> Hi,
>
> On Fri, Aug 10, 2012 at 12:40:27PM +0530, Praveen Paneri wrote:
>> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
>> phy_init and phy_shutdown functions to enable/disable phy. Tested with
>> smdk6410 and smdkv310. More SoCs can be brought under later.
>>
>> Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
>> Acked-by: Heiko Stuebner <heiko at sntech.de>
>
> this looks good. Just 2 comments below.
>
>> ---
>> .../devicetree/bindings/usb/samsung-usbphy.txt | 9 +
>> drivers/usb/phy/Kconfig | 8 +
>> drivers/usb/phy/Makefile | 1 +
>> drivers/usb/phy/samsung-usbphy.c | 345 ++++++++++++++++++++
>> drivers/usb/phy/samsung-usbphy.h | 48 +++
>> include/linux/platform_data/samsung-usbphy.h | 27 ++
>> 6 files changed, 438 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> create mode 100644 drivers/usb/phy/samsung-usbphy.c
>> create mode 100644 drivers/usb/phy/samsung-usbphy.h
>> create mode 100644 include/linux/platform_data/samsung-usbphy.h
>>
>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> new file mode 100644
>> index 0000000..fefd9c8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> @@ -0,0 +1,9 @@
>> +* Samsung's usb phy transceiver
>> +
>> +The Samsung's phy transceiver is used for controlling usb otg phy for
>> +s3c-hsotg usb device controller.
>> +
>> +Required properties:
>> +- compatible : should be "samsung,exynos4210-usbphy"
>> +- reg : base physical address of the phy registers and length of memory mapped
>> + region.
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index e7cf84f..d916477 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -15,3 +15,11 @@ config USB_ISP1301
>>
>> To compile this driver as a module, choose M here: the
>> module will be called isp1301.
>> +
>> +config SAMSUNG_USBPHY
>> + bool "Samsung USB PHY controller Driver"
>> + depends on USB_S3C_HSOTG
>> + select USB_OTG_UTILS
>> + help
>> + Enable this to support Samsung USB phy controller for samsung
>> + SoCs.
>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>> index eca095b..dfca70d 100644
>> --- a/drivers/usb/phy/Makefile
>> +++ b/drivers/usb/phy/Makefile
>> @@ -5,3 +5,4 @@
>> ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>
>> obj-$(CONFIG_USB_ISP1301) += isp1301.o
>> +obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
>> diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
>> new file mode 100644
>> index 0000000..739b6c9
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.c
>> @@ -0,0 +1,345 @@
>> +/* linux/drivers/usb/phy/samsung-usbphy.c
>> + *
>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Author: Praveen Paneri <p.paneri at samsung.com>
>> + *
>> + * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> +*/
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/of.h>
>> +#include <linux/usb/otg.h>
>> +#include <linux/platform_data/samsung-usbphy.h>
>> +
>> +#include "samsung-usbphy.h"
>> +
>> +enum samsung_cpu_type {
>> + TYPE_S3C64XX,
>> + TYPE_EXYNOS4210,
>> +};
>> +
>> +/*
>> + * struct samsung_usbphy - transceiver driver state
>> + * @phy: transceiver structure
>> + * @plat: platform data
>> + * @dev: The parent device supplied to the probe function
>> + * @clk: usb phy clock
>> + * @regs: usb phy register memory base
>> + * @cpu_type: machine identifier
>> + */
>> +struct samsung_usbphy {
>> + struct usb_phy phy;
>> + struct samsung_usbphy_data *plat;
>> + struct device *dev;
>> + struct clk *clk;
>> + void __iomem *regs;
>> + int cpu_type;
>> +};
>> +
>> +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
>> +
>> +/*
>> + * Enables or disables the phy clock
>> + * returns 0 on success else the error
>> + */
>> +static int samsung_usbphy_clk_control(struct samsung_usbphy *sphy, bool on)
>> +{
>> + if (on) {
>> + if (!sphy->clk) {
>> + sphy->clk = clk_get(sphy->dev, "otg");
>> + if (IS_ERR(sphy->clk)) {
>> + dev_err(sphy->dev, "Failed to get otg clock\n");
>> + return PTR_ERR(sphy->clk);
>> + }
>> + }
>> + clk_enable(sphy->clk);
>> + } else {
>> + clk_disable(sphy->clk);
>> + clk_put(sphy->clk);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Returns reference clock frequency
>> + */
>> +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
>> +{
>> + struct clk *ref_clk;
>> + int refclk_freq = 0;
>> +
>> + ref_clk = clk_get(sphy->dev, "xusbxti");
>> + if (IS_ERR(ref_clk)) {
>> + dev_err(sphy->dev, "Failed to get reference clock\n");
>> + return PTR_ERR(ref_clk);
>> + }
>> +
>> + switch (clk_get_rate(ref_clk)) {
>> + case 12 * MHZ:
>> + refclk_freq |= S3C_PHYCLK_CLKSEL_12M;
>> + break;
>> + case 24 * MHZ:
>> + refclk_freq |= S3C_PHYCLK_CLKSEL_24M;
>> + break;
>> + default:
>> + case 48 * MHZ:
>> + /* default reference clock */
>> + refclk_freq |= S3C_PHYCLK_CLKSEL_48M;
>> + break;
>> + }
>> + clk_put(ref_clk);
>> +
>> + return refclk_freq;
>> +}
>> +
>> +static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
>> +{
>> + void __iomem *regs = sphy->regs;
>> + u32 phypwr;
>> + u32 phyclk;
>> + u32 rstcon;
>> +
>> + /* set clock frequency for PLL */
>> + phyclk = samsung_usbphy_get_refclk_freq(sphy);
>> + phypwr = readl(regs + S3C_PHYPWR);
>> + rstcon = readl(regs + S3C_RSTCON);
>> +
>> + switch (sphy->cpu_type) {
>> + case TYPE_S3C64XX:
>> + phyclk &= ~(S3C_PHYCLK_COMMON_ON_N);
>> + phypwr &= ~S3C_PHYPWR_NORMAL_MASK;
>> + rstcon |= S3C_RSTCON_PHY;
>> + break;
>> + case TYPE_EXYNOS4210:
>> + phypwr &= ~EXYNOS4_PHYPWR_NORMAL_MASK;
>> + rstcon |= S3C_RSTCON_PHY;
>> + default:
>> + break;
>> + }
>> +
>> + writel(phyclk, regs + S3C_PHYCLK);
>> + /* set to normal of PHY0 */
>> + writel(phypwr, regs + S3C_PHYPWR);
>> + /* reset all ports of PHY and Link */
>> + writel(rstcon, regs + S3C_RSTCON);
>> + udelay(10);
>> + rstcon &= ~S3C_RSTCON_PHY;
>> + writel(rstcon, regs + S3C_RSTCON);
>> +}
>> +
>> +static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
>> +{
>> + void __iomem *regs = sphy->regs;
>> + u32 phypwr;
>> +
>> + phypwr = readl(regs + S3C_PHYPWR);
>> +
>> + switch (sphy->cpu_type) {
>> + case TYPE_S3C64XX:
>> + phypwr |= S3C_PHYPWR_NORMAL_MASK;
>> + break;
>> + case TYPE_EXYNOS4210:
>> + phypwr |= EXYNOS4_PHYPWR_NORMAL_MASK;
>> + default:
>> + break;
>> + }
>> +
>> + /* unset to normal of PHY0 */
>> + writel(phypwr, regs + S3C_PHYPWR);
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy initialization
>> + */
>> +static int samsung_usbphy_init(struct usb_phy *phy)
>> +{
>> + struct samsung_usbphy *sphy;
>> + int ret = 0;
>> +
>> + sphy = phy_to_sphy(phy);
>> +
>> + /* Enable the phy clock */
>> + ret = samsung_usbphy_clk_control(sphy, true);
>> + if (ret) {
>> + dev_err(sphy->dev, "phy clock enable failed\n");
>> + return ret;
>> + }
>> +
>> + /* Disable phy isolation */
>> + if (sphy->plat && sphy->plat->pmu_isolation)
>> + sphy->plat->pmu_isolation(false);
>> +
>> + /* Initialize usb phy registers */
>> + samsung_usbphy_enable(sphy);
>> + return ret;
>> +}
>> +
>> +/*
>> + * The function passed to the usb driver for phy shutdown
>> + */
>> +static void samsung_usbphy_shutdown(struct usb_phy *phy)
>> +{
>> + struct samsung_usbphy *sphy;
>> +
>> + sphy = phy_to_sphy(phy);
>> +
>> + /* De-initialize usb phy registers */
>> + samsung_usbphy_disable(sphy);
>> +
>> + /* Enable phy isolation */
>> + if (sphy->plat && sphy->plat->pmu_isolation)
>> + sphy->plat->pmu_isolation(true);
>> +
>> + /* Disable the phy clock */
>> + samsung_usbphy_clk_control(sphy, false);
>> +}
>> +
>> +static const struct of_device_id samsung_usbphy_dt_match[];
>> +
>> +static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
>> +{
>> +#ifdef CONFIG_OF
>> + int data;
>> + if (pdev->dev.of_node) {
>> + const struct of_device_id *match;
>> + match = of_match_node(samsung_usbphy_dt_match,
>> + pdev->dev.of_node);
>> + data = (int) match->data;
>> + return data;
>> + }
>> +#endif
>> + return platform_get_device_id(pdev)->driver_data;
>> +}
>> +
>> +static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
>> +{
>> + struct samsung_usbphy *sphy;
>> + struct samsung_usbphy_data *pdata;
>> + struct device *dev = &pdev->dev;
>> + struct resource *phy_mem;
>> + void __iomem *phy_base;
>> + int ret;
>> +
>> + pdata = pdev->dev.platform_data;
>> + if (!pdata) {
>> + dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
>> + return -EINVAL;
>> + }
>> +
>> + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!phy_mem) {
>> + dev_err(dev, "%s: missing mem resource\n", __func__);
>> + return -ENODEV;
>> + }
>> +
>> + phy_base = devm_request_and_ioremap(dev, phy_mem);
>> + if (!phy_base) {
>> + dev_err(dev, "%s: register mapping failed\n", __func__);
>> + return -ENXIO;
>> + }
>> +
>> + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
>> + if (!sphy)
>> + return -ENOMEM;
>> +
>> + sphy->dev = &pdev->dev;
>> + sphy->plat = pdata;
>> + sphy->regs = phy_base;
>> + sphy->phy.dev = sphy->dev;
>> + sphy->phy.label = "samsung-usbphy";
>> + sphy->phy.init = samsung_usbphy_init;
>> + sphy->phy.shutdown = samsung_usbphy_shutdown;
>> + sphy->cpu_type = samsung_usbphy_get_driver_data(pdev);
>> +
>> + ret = usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
>> + if (ret)
>> + goto err;
>> +
>> + platform_set_drvdata(pdev, sphy);
>> +
>> + dev_info(&pdev->dev, "Initialized samsung USB OTG PHY module\n");
>
> please avoid dev_info() at the end of probe. It just makes booting
> noisier.
>
>> +err:
>> + return ret;
>> +}
>> +
>> +static int __exit samsung_usbphy_remove(struct platform_device *pdev)
>> +{
>> + struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
>> +
>> + usb_remove_phy(&sphy->phy);
>> +
>> + if (sphy->clk) {
>> + clk_put(sphy->clk);
>> + sphy->clk = NULL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id samsung_usbphy_dt_match[] = {
>> + {
>> + .compatible = "samsung,s3c64xx-usbphy",
>> + .data = (void *)TYPE_S3C64XX,
>> + }, {
>> + .compatible = "samsung,exynos4210-usbphy",
>> + .data = (void *)TYPE_EXYNOS4210,
>> + },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
>> +#else
>> +#define samsung_usbphy_dt_match NULL
>> +#endif
>> +
>> +static struct platform_device_id samsung_usbphy_driver_ids[] = {
>> + {
>> + .name = "s3c64xx-usbphy",
>> + .driver_data = TYPE_S3C64XX,
>> + }, {
>> + .name = "exynos4210-usbphy",
>> + .driver_data = TYPE_EXYNOS4210,
>> + },
>> + {},
>> +};
>> +
>> +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
>> +
>> +static struct platform_driver samsung_usbphy_driver = {
>> + .probe = samsung_usbphy_probe,
>> + .remove = __devexit_p(samsung_usbphy_remove),
>> + .id_table = samsung_usbphy_driver_ids,
>> + .driver = {
>> + .name = "samsung-usbphy",
>> + .owner = THIS_MODULE,
>> + .of_match_table = samsung_usbphy_dt_match,
>> + },
>> +};
>> +
>> +module_platform_driver(samsung_usbphy_driver);
>> +
>> +MODULE_DESCRIPTION("Samsung USB phy controller");
>> +MODULE_AUTHOR("Praveen Paneri <p.paneri at samsung.com>");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:samsung-usbphy");
>> diff --git a/drivers/usb/phy/samsung-usbphy.h b/drivers/usb/phy/samsung-usbphy.h
>> new file mode 100644
>> index 0000000..093b1dc
>> --- /dev/null
>> +++ b/drivers/usb/phy/samsung-usbphy.h
>> @@ -0,0 +1,48 @@
>> +/*
>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
>> + * Author: Yulgon Kim <yulgon.kim at samsung.com>
>> + * Author: Joonyoung Shim <jy0922.shim at samsung.com>
>> + * Author: Praveen Paneri <p.paneri at samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +#ifndef __SAMSUNG_USBPHY_H
>> +#define __SAMSUNG_USBPHY_H
>> +
>> +#define S3C_PHYPWR (0x00)
>> +
>> +#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0)
>> +#define S3C_PHYPWR_OTG_DISABLE (1 << 4)
>> +#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3)
>> +#define S3C_PHYPWR_FORCE_SUSPEND (1 << 1)
>> +/* For Exynos4 */
>> +#define EXYNOS4_PHYPWR_NORMAL_MASK (0x39 << 0)
>> +#define EXYNOS4_PHYPWR_SLEEP (1 << 5)
>> +
>> +#define S3C_PHYCLK (0x04)
>> +
>> +#define S3C_PHYCLK_MODE_SERIAL (1 << 6)
>> +#define S3C_PHYCLK_EXT_OSC (1 << 5)
>> +#define S3C_PHYCLK_COMMON_ON_N (1 << 4)
>> +#define S3C_PHYCLK_ID_PULL (1 << 2)
>> +#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
>> +#define S3C_PHYCLK_CLKSEL_SHIFT (0)
>> +#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
>> +#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
>> +#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
>> +
>> +#define S3C_RSTCON (0x08)
>> +
>> +#define S3C_RSTCON_PHYCLK (1 << 2)
>> +#define S3C_RSTCON_HCLK (1 << 1)
>> +#define S3C_RSTCON_PHY (1 << 0)
>> +
>> +#ifndef MHZ
>> +#define MHZ (1000*1000)
>> +#endif
>
> this header is so small that it doesn't make sense to have it. pleae
> move these macros to C source file itself ;-)
Thanks! I will do that.
Praveen
>
> --
> balbi
More information about the linux-arm-kernel
mailing list