[PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case
Vaibhav Hiremath
hvaibhav at ti.com
Mon Aug 27 08:31:53 EDT 2012
To make it consistent, convert all hex number presentation
to lower-case from all am33xx specific nodes.
Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
Cc: Tony Lindgren <tony at atomide.com>
---
arch/arm/boot/dts/am335x-bone.dts | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 2 +-
arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++----------
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a7906cb..c64f7fa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial at 44E09000 {
+ uart1: serial at 44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..8963f20 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial at 44E09000 {
+ uart1: serial at 44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index dde76f7..be43511 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -71,7 +71,7 @@
#interrupt-cells = <1>;
};
- gpio2: gpio at 4804C000 {
+ gpio2: gpio at 4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
@@ -80,7 +80,7 @@
#interrupt-cells = <1>;
};
- gpio3: gpio at 481AC000 {
+ gpio3: gpio at 481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
@@ -89,7 +89,7 @@
#interrupt-cells = <1>;
};
- gpio4: gpio at 481AE000 {
+ gpio4: gpio at 481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
@@ -98,7 +98,7 @@
#interrupt-cells = <1>;
};
- uart1: serial at 44E09000 {
+ uart1: serial at 44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
@@ -119,28 +119,28 @@
status = "disabled";
};
- uart4: serial at 481A6000 {
+ uart4: serial at 481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
};
- uart5: serial at 481A8000 {
+ uart5: serial at 481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
};
- uart6: serial at 481AA000 {
+ uart6: serial at 481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
};
- i2c1: i2c at 44E0B000 {
+ i2c1: i2c at 44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -148,7 +148,7 @@
status = "disabled";
};
- i2c2: i2c at 4802A000 {
+ i2c2: i2c at 4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,7 +156,7 @@
status = "disabled";
};
- i2c3: i2c at 4819C000 {
+ i2c3: i2c at 4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
1.7.0.4
More information about the linux-arm-kernel
mailing list