[PATCH 00/23] work in progress: SPI controller w/DMA SAM9X5

Nicolas Ferre nicolas.ferre at atmel.com
Tue Aug 14 11:29:48 EDT 2012


On 08/14/2012 03:49 PM, Richard Genoud :
> Nicolas,
> I said that I had some work done on sam9g35-ek, here is the spi part, based
> on your and Jean-Christophe work.
> You have to enable CONFIG_ARCH_AT91SAM9X5 to get it work.
> 
> The goal of this patchset is to share the work I've done, it's not ready
> for upstream, but it may save some time.
> 
> It's based on 3.6-rc1 + Jean-Christophe's pinctrl patchset.
> 
> Best Regards,

Richard,

Thanks a lot for updating this material: We really appreciate.

We will try to review this material together with Jean-Christophe and
colleagues @ Atmel. I hope that we will go forward with this collected
material in the near future.

Maybe DMA OF part will not be upstreamed as-is because of an ongoing
initiative to build a generic dmaengine OF support.

> Jean-Christophe PLAGNIOL-VILLARD (3):
>   of: add dma-mask binding
>   of_spi: add generic binding support to specify cs gpio

I know that Jean-Christophe has had difficulties to have feedback on
there parts...

>   spi/atmel: add DT support
> 
> Nicolas Ferre (6):
>   spi/atmel_spi: trivial: change some comments
>   spi/atmel_spi: add physical base address
>   spi/atmel_spi: call unmapping on transfers buffers
>   spi/atmel_spi: status information passed through controller data
>   spi/atmel_spi: add flag to controller data for lock operations
>   spi/atmel_spi: add dmaengine support
> 
> Richard Genoud (14):
>   spi-atmel: update with dmaengine interface

This will certainly be squashed in previous path.

>   spi-atmel: fix __init/__devinit sections mismatch

This one also: but it is good to have them separated at fist.

>   spi-atmel: Fix spi-atmel driver to adapt to slave_config changes
>   AT91 DMA OF support
>   add at91sam9x5 Kconfig ARCH/SOC link

Is it fixup for a bug? Jean-Christophe, a though about this one?

>   spi-atmel: add DMA OF support
>   [BUG] SPI: array out of bound => no CS
>   [BUG] atmel-spi && DMA: OOPS if buffer > 4400 bytes
>   sam9x5: declare SPI clocks
>   spi-atmel: add sam9x5 SPI in device tree
>   spi-atmel: add dma support in sam9x5 device tree
>   spi-atmel OF: complete documentation

Maybe documentation has to be folded in the patch that actually adds the
OF support.

>   spi-atmel: complete DMA slave OF documentation
>   sam9x5ek DTS: enable SPI dataflash
> 
>  Documentation/devicetree/bindings/spi/spi-bus.txt  |    6 +
>  .../devicetree/bindings/spi/spi_atmel.txt          |   46 ++
>  arch/arm/boot/dts/at91sam9x5.dtsi                  |   42 ++
>  arch/arm/boot/dts/at91sam9x5ek.dtsi                |   10 +
>  arch/arm/mach-at91/Kconfig                         |    4 +
>  arch/arm/mach-at91/at91sam9x5.c                    |    3 +
>  arch/arm/mach-at91/include/mach/at_hdmac.h         |    1 +
>  drivers/of/Kconfig                                 |    4 +
>  drivers/of/Makefile                                |    1 +
>  drivers/of/of_atmel.c                              |  111 ++++
>  drivers/of/platform.c                              |   23 +-
>  drivers/spi/Kconfig                                |    9 +
>  drivers/spi/spi-atmel.c                            |  611 ++++++++++++++++++--
>  drivers/spi/spi.c                                  |   55 ++-
>  include/linux/of_atmel.h                           |   29 +
>  include/linux/spi/spi.h                            |    3 +
>  16 files changed, 914 insertions(+), 44 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi_atmel.txt
>  create mode 100644 drivers/of/of_atmel.c
>  create mode 100644 include/linux/of_atmel.h
> 


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list