[PATCH v2 3/4] arm/dts: Add tps65910 regulator DT data to am335x-evm.dts

[Mark Brown]

On Wed, Aug 15, 2012 at 04:47:02PM +0000, AnilKumar, Chimata wrote:
> On Wed, Aug 15, 2012 at 18:23:39, Mark Brown wrote:

> > If you have all these unrelated supplies in the system then your device
> > tree should accurately reflect that.  However this would be a very

> In that case I have to add all these fixed regulators.

Why?  You then immediately go on to say...

> > unusual hardware design.  Usually there would be a very small set of
> > system supply rails, frequently only one.

> In case of AM335X-EVM one dedicated supply (5v) feeding to all the input
> supplies (vcc1-7 and vccio) of the regulators.

...that they all map onto the same physical supply?