[PATCH 2/4] ARM: dts: mxs: Add alternative I2C muxing options for imx28

[Shawn Guo]

On Thu, Aug 23, 2012 at 10:42:29AM +0200, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Cc: Brian Lilly <brian at crystalfontz.com>
> ---
>  arch/arm/boot/dts/imx28.dtsi |   11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 787efac..f6ffcd9 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -410,6 +410,17 @@
>  					fsl,pull-up = <1>;
>  				};
>  
> +				i2c0_pins_b: i2c0 at 1 {
> +					reg = <1>;
> +					fsl,pinmux-ids = <
> +						0x3001 /* MX28_PAD_AUART0_RX__DUART_CTS */
> +						0x3011 /* MX28_PAD_AUART0_TX__DUART_RTS */

The comments are wrong.  I fixed them as below and applied the patch.

						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */

Regards,
Shawn


> +					>;
> +					fsl,drive-strength = <1>;
> +					fsl,voltage = <1>;
> +					fsl,pull-up = <1>;
> +				};
> +
>  				saif0_pins_a: saif0 at 0 {
>  					reg = <0>;
>  					fsl,pinmux-ids = <
> -- 
> 1.7.9.5
>