[PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence

[Vaibhav Hiremath]

On 8/3/2012 3:50 AM, Omar Ramirez Luna wrote:
> Hi.
> 
> On 2 August 2012 02:52, Paul Walmsley <paul at pwsan.com> wrote:
>> On Mon, 16 Jul 2012, Omar Ramirez Luna wrote:
>>
>>> For a reset sequence to complete cleanly, a module needs its
>>> associated clocks to be enabled, otherwise the timeout check
>>> in prcm code can print a false failure (failed to hardreset)
>>> that occurs because the clocks aren't powered ON and the status
>>> bit checked can't transition without them.
>>>
>>> Signed-off-by: Omar Ramirez Luna <omar.luna at linaro.org>
>>
>> Is enabling the clocks sufficient?
> 
> During my testing it seemed enough, besides it looks clk framework is
> doing the same as _omap4_enable_module.
> 
>> Or do we also need to enable the
>> IP block, e.g. by calling
>>
>>         if (soc_ops.enable_module)
>>                 soc_ops.enable_module(oh);
>>
>> as we do on OMAP4+ in _enable() ?
> 
> Basically this is a call to _omap4_enable_module, and the latter will
> "Enable the modulemode inside CLKCTRL".
> 
> However, _enable_clocks path which ends calling omap2_dflt_clk_enable
> does the same thing with its clk->enable_reg field.
> 
> So in _enable:
> 
>         _enable_clocks(oh);
>         if (soc_ops.enable_module)
>                 soc_ops.enable_module(oh);
> 
> The enable_module part seems redundant to me, since the module should
> be already enabled by the first call to _enable_clocks.
> 

Yes they do same thing, I believe the plan is to get rid of all clock
leaf-nodes in the near future, and let hwmod handle module
enable/disable part.

Thanks,
Vaibhav

> Regards,
> 
> Omar
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>